Related
Hey guys
I was wondering if anyone has had any luck with getting a d810 to sync up with osx? I have tried the latest missing sync demo but it doesn't seem to support the d810 (looks like it supports the 838). I have tried searching the forums with no luck.
Cheers
Semir
semir said:
Hey guys
I was wondering if anyone has had any luck with getting a d810 to sync up with osx? I have tried the latest missing sync demo but it doesn't seem to support the d810 (looks like it supports the 838). I have tried searching the forums with no luck.
Cheers
Semir
Click to expand...
Click to collapse
If the d810 is similar (which it is) to the htc trinity then it works quite well with missing sync for wm 3. It will install a small cab file called missing sync and it works flawlessly with address book and ical. It even syncs the pictures in address book. It worked on the first try. BUT (this might be your problem) some roms, if I remember correctly the old dopod rom with gps had a problem syncing. The solution I found is to go to Settings>Connections>USB to PC and check or uncheck (do a trial and error coz I forgot) "Enable advaced network functionality".
Thanks for the reply Aero. I'm currently at work and have been trying to do this through bluetooth with my macbook. I will try with the usb cable when I get home and hopefully it might work.....
Semir
yep...uncheck the option referred in the previous post. I have synced my XDA Orbit, MDA Vario and HTC p3600 no probs with Missing Sync for WM on my home imac. I always, however, do it via the usb cable from the phone direct to imac usb socket and not via a charge and sync cradle
I havea HTC 3600 and i use Missing sync and it work great!!
I finally managed to get it working with missing sync 3.02, even over bluetooth. Thanks for all the suggestions people.
Don't upgrade to WM6 coz current missing sync does not support WM6. Hope they get off their #$$ and fix it already.
Happy New year to everybody...
Mine has started off bad, I just returned from my X-mas/New year break and I can no longer sync, install or uninstall programs ?
when I connect my PDA to the PC it sees it, but it can't sync, if I go to remove/add programs it shows empty nothing installed.
I can even brows the PDA but I can't copy files to or from it?
I'm lost, can anyone help me out on this I really don't want to do a hard reset.
Thanks.
Anyone.........?
tryed to reinstall active-sync?
did you installed some program has to do with network (kind of ftp-server or something else that uses some ports in you network-config)
i had the problem with filezilla ftp-server, using port 990 for ssl-authentification.
the problem was, active-sync also uses this port, but filezilla starting as service was bound to this, so AS could not work.
edi said:
tryed to reinstall active-sync?
did you installed some program has to do with network (kind of ftp-server or something else that uses some ports in you network-config)
i had the problem with filezilla ftp-server, using port 990 for ssl-authentification.
the problem was, active-sync also uses this port, but filezilla starting as service was bound to this, so AS could not work.
Click to expand...
Click to collapse
Hi Edi, No I haven't installed anything, but I think my problem might be something else (worse), I just realised that I can no longer copy move or delete files from either the PDA or the MC, I get an "access is denied" error.
Anyone have any idea what might have caused this? and better still, is there a fix.
I seem to be repeating myself lately with this answer, so I apologise if it seems down-right obvious, but have you ensured you have the latest version of ActiveSync/Windows Mobile Device Centre?
The reason I ask this is because I too was experiencing Sync problems using WMDV, but realised I didn't have the latest version (it doesn't automatically update with Windows Update, WTF?). Windows Mobile 6 is obviously programmed slightly different from revious versions, so updating Sync software is a simple step that's often missed...
Audio said:
I seem to be repeating myself lately with this answer, so I apologise if it seems down-right obvious, but have you ensured you have the latest version of ActiveSync/Windows Mobile Device Centre?
The reason I ask this is because I too was experiencing Sync problems using WMDV, but realised I didn't have the latest version (it doesn't automatically update with Windows Update, WTF?). Windows Mobile 6 is obviously programmed slightly different from revious versions, so updating Sync software is a simple step that's often missed...
Click to expand...
Click to collapse
Hi Audio,
Thanks for the reply, but I do have the latest version and I never had a problem with it until this week.
Just so i can try and help, what is it you are using Dave? AS or WMDV?
Audio said:
Just so i can try and help, what is it you are using Dave? AS or WMDV?
Click to expand...
Click to collapse
Hi Audio, I use both, AS at work and WMDV at home, both used to work fine.
And do you experience the issue on both?
EDIT: Apparently, there may be a problem with ActiveSync 4.5. Just take a look at this list of complaints about it lol.
One user stated:
"I was using AS4.2 with my ETen M700, everything was fine. I wanted to upgrade to WM6 and teh instructions said I needed to use AS4.5 I installed it and tried to connect my device - disaster! The rapimgr.exe process runs at 99% and slows the computer to a crawl.
After 3 attempts, I uninstalled it, and re-installed AS4.2 (available from www.microsoft.com) and now things are working again. "
This may be worth doing to see if this soilves your problem...
Audio said:
And do you experience the issue on both?
Click to expand...
Click to collapse
Yes I have tried it on three different machines, I can see the PDA but it won't sync or let me move or copy files.
It look like I might have to do a hard reset, but I'm hoping not
Also, a chap on a premium (you have to pay for support!) site said the following, which seems slightly similar:
"I've been using ActiveSync for a while now to sync outlook up to my motorola q. For some strange reason it's stopped working. The connection takes place, you get the little signal saying that ActiveSync picks up on it, the "Connecting" message, followed by the "Synchronizing" message... and nothing. It just hangs there. I've reinstalled ActiveSync and Outlook and did a hard reset on the phone. I'm convinced the issue is with the desktop, if I take the same PDA home, I'm able to sync up with my PC there. Does anyone know what happens during the Synchronizing phase and what could be possibly causing it to hang? ActiveSync 4.5 is a new beast, solutions to the older versions don't seem to apply.
If I hit the Stop button, ActiveSync hangs on the "Stopping" message and ActiveSync on the phone becomes unresponsive until I unplug the cable."
So even a Hard reset didn't solve this guys problems...
I would recommend uninstalling AS 4.5 from your machine, and installing 4.2. Reason being, i believe you need your phone connected to the computer when you install syncing software, so it more than likely "fiddles" with some very well hidden settings on the device. If this is the case, 4.5 may have [email protected] it up, but 4.2 may be your savior.
If you decide to give it a go, let us know how it goes...
Audio said:
Also, a chap on a premium (you have to pay for support!) site said the following, which seems slightly similar:
"I've been using ActiveSync for a while now to sync outlook up to my motorola q. For some strange reason it's stopped working. The connection takes place, you get the little signal saying that ActiveSync picks up on it, the "Connecting" message, followed by the "Synchronizing" message... and nothing. It just hangs there. I've reinstalled ActiveSync and Outlook and did a hard reset on the phone. I'm convinced the issue is with the desktop, if I take the same PDA home, I'm able to sync up with my PC there. Does anyone know what happens during the Synchronizing phase and what could be possibly causing it to hang? ActiveSync 4.5 is a new beast, solutions to the older versions don't seem to apply.
If I hit the Stop button, ActiveSync hangs on the "Stopping" message and ActiveSync on the phone becomes unresponsive until I unplug the cable."
So even a Hard reset didn't solve this guys problems...
I would recommend uninstalling AS 4.5 from your machine, and installing 4.2. Reason being, i believe you need your phone connected to the computer when you install syncing software, so it more than likely "fiddles" with some very well hidden settings on the device. If this is the case, 4.5 may have [email protected] it up, but 4.2 may be your savior.
If you decide to give it a go, let us know how it goes...
Click to expand...
Click to collapse
Hi Audio, I don't know what to do, I started another thread about no longer being able to either copy, move, delete, install or uninstall anything, I really don't think it's a sync problem anymore. I will wait another day or so and then I'm going clear storage and start again.
what really pisses me off is my wife has no problems at all? perhaps my PDA is ******.
Exactly the same has just happened to me - I tried to connect to ActiveSync this morning to copy a file across via bluetooth, but it refused to connect. I plugged in the USB cable, nothing - the phone charges but ActiveSync does not want to know.
I deleted the device in AS, tried to add a new one - nothing found.
I last sync'd up fine 4 days ago.
I am using Dutty's DualTouch v1.1 release.
I am using AS 4.5.0 build 5096
If I discover services via BT from the kaiser to the computer it finds the ActiveSync service.
I have done a soft reset, no difference, restarted the PC, same. I haven't applied any Windows Updates or made any changes since it stopped working.
I might try rolling back to AS 4.2
Edit: Same with AS4.2
Think it might be clear storage time
Cleared storage and then it worked fine...will take the opportunity to upgrade to dualtouch v2
Hi Blaze, damn it's annoying isn't it, my next move is clear storage as well.
Hope mine works again.
It's bloody happened again I reflashed the rom with Duty's Dual Touch V2. Much better rom, but activesync has just given up again via BT and usb. Maybe it's some inherent problem with WM, or with Duty's roms - which are you using Dave?
I've tried it on a fresh build of XP Pro on an old machine with nothing than AS & Outlook 2k3 on - same, AS sees the device, but wont sink. Problem seems with the device...
Dave... said:
perhaps my PDA is ******.
Click to expand...
Click to collapse
Sorry I cant help other than to say my dutty rom is working fine on WMDC.
But I had to post and ask why you asterisked out the "ed" and left the lrest of the word in?
Brilliant! Lmao! :d:d:d
unwired4 said:
Sorry I cant help other than to say my dutty rom is working fine on WMDC.
But I had to post and ask why you asterisked out the "ed" and left the lrest of the word in?
Click to expand...
Click to collapse
Good Point I didn't even notice, put it down to stress...
PS: For anyone who's interested, I ended up doing a hard reset, reinstalled my apps, restored my backups and it's working fine now.
Did you have F-secure Mobile installed? If not, I could take that away from possibilities that's causing this problem
hello guys.
i'm trying to connect my tytnII with ubuntu.
couldn't obtain any result with synCE, but on an ubuntu wiki i've read that wm6 is not yet supported. one thing that interested me very much is the chance to connect the ppc t least as a mass storage installing on the phone the WM5torage program.
since the thing i'm intereseted the most is to browse the folders to upload stuffs as well, i've installed the program.... but... it is not recognized at all, i activate the program and connect the usb to pc, but ubuntu stays quiet and doesn't recognize nor do anything.
is there something more should i do in order to make it work ?
tnx
up.
none can help me pls?
cardexport2 ?
I use kubuntu (gutsy) and Cardexport2 works well : http://www.softick.com/cardexport2/
aurelieng said:
I use kubuntu (gutsy) and Cardexport2 works well : http://www.softick.com/cardexport2/
Click to expand...
Click to collapse
finally!
thank you very very much.
finally ubuntu recognizes my usb!
now i can upload stuffs into the mmc at least.
thank you.
How?
How does this work as the program is for a Palm and WinXP Desktop.
I am using ubuntu gutsy and WM6 ... kinda backwards here LOL
If anyone has any tips for getting these 2 to sync that would be great! I also have a TYTN II and have had no success in getting these to sync at all with SynCE.
Thanks!
AF
I've been attempting to get Synce working, but have utterly failed; largely because the documentation is so utterly ****.
pocket pc version
a link to the pocket pc version. I will try it later.
http://www.softick.com/pocket-pc/cardexport2/
A Different Option
What I ended up doing is getting a free hosted exchange server with http://live.mail2web.com so that at least will sync my phone and back everything up. Also I know there is an evolution plugin that will sync to exchange servers too, the only thing that doesn't work is getting cabs and other files to/from the phone and computer. As for PIM information, it all syncs OTA and is done over Microsoft Direct Push Technology.
Check out this news article, its where I got the idea from http://cristiantm.wordpress.com/2007/12/22/sync-wm5-wm6-with-evolution-without-activesync/
Good Luck too
AF
Mail2web will not work
Evolution cannot pass the @ symbol to log you into mail2web so that won't work. WM5torage is free, available in these forums and works flawlessly. Been using it for awhile, Ubuntu recognizes it as an external drive.
-j
Hi
I have successfully got synce for file browsing and internet sharing working over USB with kubuntu 7.10. However, at the time you had to apply a linux kernel patch to get the WM6 device recognized. You also had to be running the latest synce (not ubuntu stock).
Here's the ubuntu bug report on the kernel side of things:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/192411
... the first patch listed (from the synce subversion repository) was the one I have used successfully although it looks like it has been rolled into the 2.6 tree (can't see the change in LXR for the latest stable 2.6.24.4 kernel, but I may be wrong). Here's hoping it'll just run out of the box soon.
And here are the instructions for installing the updated synce:
http://www.synce.org/moin/SynceWithUbuntu
With the patch and updated software the WM6 device attaches and shows up as a regular network device (rndis0 I think), negotiates private addresses for the link and you can just set a default route out of rndis0 to use the internet. Strangely, I did find that I had to set internet sharing on my mobile to share via bluetooth rather than USB to get that bit working.
Sorry the instructions are a bit rough and ready. If anyone knows the location of a proper howto, do post it. I had to piece it together myself a few months back and it was quite painful.
Good luck.
Si
I’ve had the diamond for approx 1 month and regularly sync it to my work and home pc running XP and Vista respectively. Up until now I’ve never had a problem with activesync to any of my past smartphones or PPC’s.
My diamond has all of a sudden decided that it doesn’t want to sync anymore. It connects ok and I can transfer files back and forth it just won’t sync.
I’ve searched the forum and found similar symptoms but nothing has worked.
I’ve deleted the partnership from the device and both pc’s, created new partnerships which on first connection does actually sync (sometimes) but from then on either says “looking for changes” or “synchronising” until it times out giving the error message “Synchronising cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft Activesync Troubleshooter in Microsoft Help on your desktop computer”
I’ve tried the help, I’ve let it do its own diagnostic, I’ve unchecked the “enable advanced network functionality” option in USB to PC. I’ve soft reset, hard reset, the only thing I haven’t done is re-flash a new rom.
Does anybody know if flashing a new rom/radio will solve the problem. I would normally just try it but I spent an hour yesterday after I hard reset putting everything back to the way I like it only to find that it synced the first time but wouldn’t work again.
If anyone has any other suggestions before a re-flash I would welcome them. Otherwise I’ll bite the bullet and hope for the best.
I’m currently running Duttys V1.6 Radio version 1.00.25.07
I Had this problem
Hey fella, i was having this problem and after doing a little research i found the following.. If you constantly activate and deactivate the mobile (pair and unpair) you can corrupt A/S on the system. The only way i got around this was to uninstall active sync and re-install it again.
Hope this helps...!
I've never been able to get activesync to work harmoniously between relationships with two PCs.
Most syncs with a second machine after successful syncs with a first tend to result in errors that require my intervention, especially if an item of data has been changed. Drives me mad sometimes, and I often need to spend more time fixing these errors than it would take to manually update stuff across my three devices. I get the feeling the comparison/processing engine activesync uses is no where near sophisticated or clever enough to carry out the processing, and when it does have errors, the scope for my intervention to help it in its quandary are fairly hopeless.
I'm hoping that as devices like the diamond bring this lets face, it fundamentally great, but nevertheless fundamentally flawed platform to the masses, then Microsoft will have to put more effort into activesync and how it copes with relationships across two (or perhaps even more in future) PCs.
Ps, neomagik, actual connection, which sometimes has hiccups, has never been a big problem for me, (a few minutes in the various settings usually sorts these), but I've been using activesync for about 4 years before my diamond with with my HP4700 and various double PC partnerships along the way, and can confidently say that the problems I describe are not device related, but are the result of activesync inadequacies.
Thanks fyew-jit-tiv but I've tried that already. Also, it wont sync to WMDC in Vista either and it's unlikely that the same fault occured in AS and WMDC at the same time. This is what leads me to believe it's the Diamond and not the PC's.
Been there, done that....
Suprised you've not had this issue earlier...I've been suffering with Activesync issues for years
There are lots of ways to diagnose and resolve but perhaps you just might want to get the sledgehammer out...this mostly works for me....(I hope your familiar with Outlook!)
On one PC (I would use the XP "older" Op system one) export your synced data from Outlook to a .pst or .ost file for backup and later import (after delete & tidy stuff you no longer need in Calander/Contacts/Tasks, etc)
then
Delete all your data in Outlook, create a new empty .pst (connect to same), delete old .pst
then
delete partnership with device (to be sure), and remove same data (Contacts/Calander etc) from device
then
You can then check the exported/saved .pst for errors (I can't remember the MS programme...google for it), once satisifed OK import all you info back into Outlook
then
Synchronise with new partnership to device.
Hopefully so far so good
(sometimes I even rename the device-partnersip etc in case something "residual" there stays behind and corrupts something )
Next
Prior to connecting device with WORK PC:
Delete all previously synced data in Outlook and delete partnership there. I then make sure that in Activesync (before establishing new partnership) that I click option for one way data transfer ie replace items on computer with those from device
then
...plug in and establish new partnership, hopefully no problems....data populates computer from device. Once established then put back how you prefer data to be transfered (if there is a conflict etc)
Return home and partnership there still synchronised, Hopefully this works
If you find that there are still issues, you can un-Check and Check each synced area (Contacts, Calander, Tasks, Synced Files) independently to see where the conflict is.....
...I have found conflicts mostly occur with:
i) Calander: Birthdays/Anniversarys (probably as they are extended recurring events)
ii) Calnder: Meetings etc that might be recurring
There are real issues if using old versions of Outlook (2000 for me at work ) syncing with most recent ones!!
Sorry for the mad typing but best I can do for a "Quick" reply....Good luck !!
Studz, I know what you mean, I often get errors where it asks you to "resolve item" and after a while of playing it usually works. This is different, it won't sync at all.
neomagik said:
Studz, I know what you mean, I often get errors where it asks you to "resolve item" and after a while of playing it usually works. This is different, it won't sync at all.
Click to expand...
Click to collapse
Presume you have done the most obvious, and that is un-install and re-install Activesync and the Vista sync programme on both PC's ?
neomagik said:
Studz, I know what you mean, I often get errors where it asks you to "resolve item" and after a while of playing it usually works. This is different, it won't sync at all.
Click to expand...
Click to collapse
I had this once I think a year or so back. Tried so many things that I can't remember what finally fixed it.
I think a good place to start though, like PJ6363 says, is do a clean sweep... re-install activesync on both machines, and I would also reinitialise your Outlook Account (.pst) on the master PC and delete on all other devices.
Good luck, and tell us how you get on.
neomagik said:
Thanks fyew-jit-tiv but I've tried that already. Also, it wont sync to WMDC in Vista either and it's unlikely that the same fault occured in AS and WMDC at the same time. This is what leads me to believe it's the Diamond and not the PC's.[/QUOT
Neomagik... Sorry i could help any further fella.. As i said in last post i had this problem and i just re-installed A/S... The only other thing i done after i un-installed A/S was to run a registry cleaner.!
P.s i don't think is down to the Diamond. I Was having this problem with the Touch (elf) too...
Click to expand...
Click to collapse
well, i have similar issue w/ sync and finally, i solved the problem by changing the sync cable.
Thanks folks,
I'm going to try all of these.
@ Snufkin, I'm using two different sync cables so I know this is not the problem.
My diamond did funny things when the screen would turn off quickly after connecting because i set it not to charge when connected. Gave all sorts of weird errors.
Now, screen stays on because i want it to charge and sync completes now, still takes a while though.
You guys are aware that WM6.1 has a problem syncing with 2 computers, aren't you?
Some people claim they managed to do it and I believe them, only none of the voodoo worked for me. Never had that problem with WM5 and 6.
pedmond said:
You guys are aware that WM6.1 has a problem syncing with 2 computers, aren't you?
Some people claim they managed to do it and I believe them, only none of the voodoo worked for me. Never had that problem with WM5 and 6.
Click to expand...
Click to collapse
there is a long thread about this issue somewhere conclusion 100% in wm 6.1 you can not sync with 2 PC. this is a wm 6.1. related problem.
i can sync with 2 pC my athena with wm 6 but i can not do it with the diamond or trinity. don't even try it. it will mes you the whole outlook!
Sync with WM6.1....off course u can!
Been syncing my Kaiser and now Diamond with WM6.1 for well over a year with 2 PC's. Must have done it at least 20 times with various devices and ROM's. Kicker is that my work has W2000 & O2000, and at home I use XP and O2007....still works!!
I'm not saying I don't occasionally have issues...but I do carry more than 1000 contacts and and extended calander with numerous recurring entries
.....like I've posted before (as many others) there are issues, but nothing insurmountable. I'd be lost if I could not sync my work PC, homw PC and PDA
Read around and you'll see........
here u are, i found the thread:
http://forum.xda-developers.com/showthread.php?t=377823
i tried long and hard to sync my diamond with 2 pc. all i got is errors and double tasks and appointments. got tired and gave up! my contacts list is too precious to play with!. i do have over 600 contacts and 1300 numbers (tlf, mobile, fax).
in order to have my diamond sync with 2 pc i syinc it with one, then i sync my athena and sync with the second....lol...this is my way to have 2 pc and 2 htc devices in sync.
I had my Diamond (and previous Trinity) synced with 2 pc's. No major problems until now.
It's dead
OK, I have tried the steps suggested by PJ6363 with no success. It won’t sync to the first pc let alone the second.
I then decided to dig out the old C500. After blowing the dust off I hard reset to clear out any info left on it. Plugged it in and hey presto, immediate sync. Unplugged it and tried again, another sync. Added a contact whilst synced and it updated straight away.
I then deleted all partnerships on pc and diamond and plugged it in. It went through the usual setup and connected to the device as before but surprise surprise, no sync.
Does this not mean that the data on the PC is fine and it is a problem with the Diamond, possibly a hardware problem?
Unless anyone else can suggest anything I’m going to flash a new rom but I have a strong suspicion it will not make a difference.
neomagik said:
OK, I have tried the steps suggested by PJ6363 with no success. It won’t sync to the first pc let alone the second.
I then decided to dig out the old C500. After blowing the dust off I hard reset to clear out any info left on it. Plugged it in and hey presto, immediate sync. Unplugged it and tried again, another sync. Added a contact whilst synced and it updated straight away.
I then deleted all partnerships on pc and diamond and plugged it in. It went through the usual setup and connected to the device as before but surprise surprise, no sync.
Does this not mean that the data on the PC is fine and it is a problem with the Diamond, possibly a hardware problem?
Unless anyone else can suggest anything I’m going to flash a new rom but I have a strong suspicion it will not make a difference.
Click to expand...
Click to collapse
It looks like something other than what I have been pointing out....see here: http://forum.xda-developers.com/showthread.php?t=377823
I think you need to get serious and re-install the actual software itself on the device (hard reset), appears that Activesync on PC's is good...but would re-install there anyway!!
Look at it this way, you have found a sweet excuse to update your ROM withthe latest version and clean up your contacts/calander etc....should not be an issue with a fresh ROM install (try SwiftB 6.0....excellent!!)...let us know how you get on
Ah ha....forgot something critical...if you are syncing using older version of Windows (2000) or Outlook ...or any issues syncing for that matter, then I found that you MUST go to Settings->Connections->USB to PC and turn off Enable Advanced Network Functionality...have you done this?
I'm starting to fear if something is broken in the phone because no matter what I do, it fails to work with mac osX..
Any suggestions on how to get eg. WmWifiRouter work in macs, or even how to sync it with some synchronizer application -because none of them fails to connect me whether it's BT or usb.
I think the right procedure is to launch eg. missing sync or syncmate what else are there? which is the most reliable?), then connect the usb-cable, then choose Activesync as connection type and that's it?
Doesnt work for me No matter whether 'enable advanced network' is on or off. The applications simply fail to detect my device.
If I choose the disk drive, it works for a while as an external drive but soon stops responding or turns helluva slow.. I've tried copying pictures and movies from it for months now (tried this every now and then), but I'm running clueless on what to do
What are the correct bluetooth settings in mac with diamond? I cant get it to work either.
I want to use it as proper high-end toy, I even have 1mbit wireless net in it when using it with WmWifiRouter, but even that doesnt work for me and I cant understand why Help pls
I use Missing Sync for Windows Mobile, and I connect to Bluetooth. It syncs seamlessly and transfer files without problems.
You can find the program and / or the information here
Another option is Sync Mate, it's free for Standard version but you can buy additional options (iTunes sync etc) in the Expert Edition.
http://mac.eltima.com/sync-mac.html
Prefer it to Missing Sync personally.....
Missingsync vs. Syncmate
I tried both and my suggestion is not to try it. Reason being if you use Missingsync, use missingsync only. If you use Syncmate, use syncmate only.
However, Missingsync is better due to its more stable system. Syncmate tends to double copy items in calendar and contacts. It'll be an annoying mess to clean. I did it and it's no fun when you have over 500 contacts in your phone.
Anyway, that's my recommendation.
Mike
mantonsim said:
I tried both and my suggestion is not to try it. Reason being if you use Missingsync, use missingsync only. If you use Syncmate, use syncmate only.
However, Missingsync is better due to its more stable system. Syncmate tends to double copy items in calendar and contacts. It'll be an annoying mess to clean. I did it and it's no fun when you have over 500 contacts in your phone.
Anyway, that's my recommendation.
Mike
Click to expand...
Click to collapse
Only had that issue with an early beta of Syncmate, never had that problem again.
I have an expert edition from Eltima (sponsored by Eltima for testing their beta's ).
I must admit that the software had some hickups when it still was a beta, but I nowadays it's running like clockwork.
My 2ct's (euro cts = 2.75 $cts )
I'm going crazy trying to figure out why syncmate won't sync with my phone. I installed the driver on my phone, yet it doesn't connect with the program. I open syncmate and it never recognizes I have a phone plugged in. I've followed syncmate's steps to no success. Does anybody know what to do?
I tried both for a season and found MissingSync to be a generation ahead. It's been out for quite sometime and is very stable. I had hard time syncing with Syncmate. I sync my device via BT and works like a champ. It's a bit expensive but well worth the price.
My gsm diamond is arriving soon and I'm trying to make sure everything will work with my macbook pro (OSX Leopard), so I've read up on syncing programs for mac and upgrading hard spl etc.
My problem is that all the files I've come across for upgrading hard spl and radio are in .exe format. Is it possible to upgrade using a mac or do I need a pc with xp/vista?
As far as I know syncMate/MissingSync can't read and open .exe
(I've searched ways of "opening the contents" of .exe using stuffit and file juicer with the possibility of a .cab file being inside but to no avail. I may be barking up the wrong tree with this one...)
Sorry I've been searching for aages but couldn't find an answer. Is there a solution to what seems like a fairly simple problem...??
You can sync your WM device with your mac as explained before.
To upgrade the ROM, you will need a Windows installation. Personally, I tried to do it through a virtual machine with WMWare but never succeeded (It seems that once the device reboot, it is not recognized anymore by the virtual machine)
Youmoussa said:
You can sync your WM device with your mac as explained before.
To upgrade the ROM, you will need a Windows installation. Personally, I tried to do it through a virtual machine with WMWare but never succeeded (It seems that once the device reboot, it is not recognized anymore by the virtual machine)
Click to expand...
Click to collapse
Actually, i always upgrade using the Mac:
-take the signed_image.nbh and rename it to DAIMIMG.NBH
-connect the diamond as a disc
-copy the file to the internal storage
-flash by rebooting into bootloader (volume down& back plus reset)
Safe simple & fast!
I've got a MacBook Pro, and I've been working around a bunch of these issues. First, why are you trying to cable sync your WinMo phone? You are better off keeping everything in the cloud. I have an exchange server at work, so all my contacts, calendar events, and emails sync OTA.
Also, Google has a new beta out:
http://www.google.com/support/mobile/bin/answer.py?answer=138636&topic=14299
This lets you use your gmail account with Activesync if you don't have an exchange account. You can manage all your contacts, etc OTA for free. Much better than paying for wonky syncing software. Plus, when you flash your phone a million times, it's pretty easy to get everything back on
As far as flashing, you will need to flash from the bootloader from the internal memory if you don't use Boot Camp. Parallels won't cut it, either (not sure about VMWare); you have to be in windows for everything to work smoothly. However, it is nice that the Diamond can be put into mass storage mode; it makes copying files to the diamond a piece of cake.
the-equinoxe said:
Actually, i always upgrade using the Mac:
-take the signed_image.nbh and rename it to DAIMIMG.NBH
-connect the diamond as a disc
-copy the file to the internal storage
-flash by rebooting into bootloader (volume down& back plus reset)
Safe simple & fast!
Click to expand...
Click to collapse
The problem with that is that you have to delete everythin on the internal storage first. (I had to the last time)
daveeckert said:
I've got a MacBook Pro, and I've been working around a bunch of these issues. First, why are you trying to cable sync your WinMo phone? You are better off keeping everything in the cloud. I have an exchange server at work, so all my contacts, calendar events, and emails sync OTA.
Also, Google has a new beta out:
http://www.google.com/support/mobile/bin/answer.py?answer=138636&topic=14299
This lets you use your gmail account with Activesync if you don't have an exchange account. You can manage all your contacts, etc OTA for free. Much better than paying for wonky syncing software. Plus, when you flash your phone a million times, it's pretty easy to get everything back on
As far as flashing, you will need to flash from the bootloader from the internal memory if you don't use Boot Camp. Parallels won't cut it, either (not sure about VMWare); you have to be in windows for everything to work smoothly. However, it is nice that the Diamond can be put into mass storage mode; it makes copying files to the diamond a piece of cake.
Click to expand...
Click to collapse
You can't sync music and pictures with your solution.