upgrade error - MDA III, XDA III, PDA2k, 9090 Software Upgrading

sorry for my bad englisch.
I have upgrade my mda III (t mobile) with
1.40 Windows Mobile 2003 Second Edition version 4.21.1088 (Build 15045.2.6.0).
After i start de install program on my card I get a black screen with tekst
serial v2.05.
How kan i correct this.
Thanks

Related

Qtek 9090 WM2005 M200 Big problems....

Hello, my brohter present me his qtek 9090. It is a TMOBILE MDA III. It was in german and i downloaded a version in english the qtek 9090 windows mobile 2005 m2000. Now it is in english but i can not use the WIFI feature. In Settings/ System / ABOUT appears Windows Moile Version 5.0 OS 5.1.1700 (build 14343.0.0.0).
I donwloaded a few roms but all of them say that my pda is not compatible with that version. Can You help me????? Thank You Very Much
Did you read everything from this page?
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
You have there ALL the information you would need about your problem.
BTW: you said nothing about what rom have you tried to install - I mean name (like Helmi 1.3.2, or Baniaczek R2 etc).
Thank you very much Jakudd for the reply of my message. I have tried all that you tell me. The rom i installed yesterday was;
Rom Windows Mobile 2005 Qtek 9090 Spv m2000 (the full name of the file). So i think i have installed the orange ROM. It was installed with the Tmobile ROM but i dont know wich ROM. When i har reset (power button + reset) the pda it apears something like that
R 1.13.00
N 1337.41
D 5.03.02 WWE
i have donwloaded 4 ROMs. I changed de BAupgrade por MAupgradenoid as i have seen in this forum. I use the MAupgrade, the computer says that is going to upgrade the pda but then, when i click in upgrade, the activesync turn off in the computer and the upgrade say that there is not any pda conected to the pc. I hope you to understand me what i want to say... sorry of my bad english.

ROM Update HTC TyTN II (Kaiser) Problem Radioversie

ROM Update HTC TyTN II (Kaiser) Problem Radioversie
Dear people,
I have a number of months now since the HTC TyTN II Kaiser (purchased separately). I am very satisfied with the appliance and the Windows mobile, but I would like to wish update to Windows mobile 6.1 here but first I need to update my radio version and the new version according to me.
Is there someone who has experience with them?, Radioversie What should I have and where can I find on the Internet (xda-developers)
Is there also known as ROM and good for the TyTN II (Kaiser)
A get error tekst if a update (ERROR 262)
HTC TyTN II (NED)
Rom Version: 1.56.404.6
Rom Date: 08/28/07
Radioversie: 1.27.12.11
Protocolversie: 22.45.88.07H
CE operating system 5.2.1620 (Build 18125.0.4.2)
Many thanks,
Martijn
mekhardt said:
ROM Update HTC TyTN II (Kaiser) Problem Radioversie
Dear people,
I have a number of months now since the HTC TyTN II Kaiser (purchased separately). I am very satisfied with the appliance and the Windows mobile, but I would like to wish update to Windows mobile 6.1 here but first I need to update my radio version and the new version according to me.
Is there someone who has experience with them?, Radioversie What should I have and where can I find on the Internet (xda-developers)
Is there also known as ROM and good for the TyTN II (Kaiser)
A get error tekst if a update (ERROR 262)
HTC TyTN II (NED)
Rom Version: 1.56.404.6
Rom Date: 08/28/07
Radioversie: 1.27.12.11
Protocolversie: 22.45.88.07H
CE operating system 5.2.1620 (Build 18125.0.4.2)
Many thanks,
Martijn
Click to expand...
Click to collapse
ahum... beetje zoeken. Het antwoord is hier overal te vinden.

Upgrade unlocked Kaiser from Win Mob 6.0 to Win 6.1

Hello,
I have successfully unlocked a T-mobile MDA Vario III (aka Kaiser or Tytn II) using the instructions provided on this forum.
My Kaiser is currently running on Windows Mobile 6.0. Can I upgrade it to Windows mobile 6.1 without re-locking it or bricking it using the download here;
http://www.htc.com/www/supportdownloadlist.aspx?p_id=13&act=sd&cat=all
Thanks in advance,
Wallace
Moved as not ROM development
sorry about that.
I have just tried to upgrade from windows mobile 6.0 to 6.1 using the link here;
http://www.htc.com/www/supportdownloadlist.aspx?p_id=13&act=sd&cat=all
But when I put in my serial number, there is a message saying that my phone can not be upgraded. I wonder if this is because it was formerly locked to T-mobile?
Thanks in advance,
Wallace
Yeh your Serial is for branded T-Mob device.
Use this serial for WWE generic ROMs: HT750GB02243
Direct link to HTC ROM Download here: http://www.htc.com/www/SupportDownload.aspx?p_id=13&cat=2&dl_id=21
cheers Mister B!

** QTEK 9100 WITH WINDOWS 5.0: possible upgrade to windwos 6.5 ? **

I own a Qtek 9100 (G3) with OS Windows Mobile 5.0, would it be possible to upgrade to version 6.5 of Windows Mobile. How? There are real improvements with S.O 6.5?
anyone can me answer?
yes dear
yes dear you can
Hi,
I am a happy owner of a Qtek 9100 which originally had Windows Mobile 5.0 ITA.
course and following the upgrade guide I proceeded on my PocketPC (G3) with "Windows 6.1 beta 2 carbonara" I have to say is very stable.
The only thing I noticed is that after you upgrade your phone with the first ROM so I changed the values IPL and SPL but I do not put them equal, and that is me put them IPL 1.01 to 1.06 SPL I tried to upgrade 3 times and always successful but the values are always different.
So finally I decided to continue, I unlocked the CID with a dedicated tools and since I could not find a good link for the ROM T-LOVE I decided to directly load the ROM of Windows 6.1 to carobonara.
The procedure was successful and the phone is a bomb. I am very satisfied with this ROM, but my question now is:
I find myself with these values
IPL 1.01
SPL 1.06
gsm 01.12.10
OS. 4.0.0.
And 'normal IPL and SPL or need to be in the same? Is there a way to update only those? And from now on I can load any other ROM widzard for G3 even those with Windows 6.5?
Thanks again for your attention!
hi, gracco.
can u tell me how upgrade your Qtek 9100 from WM5 to WM 6.1 step by step or give me some link. and how i make it with WM 6.5
thanks
grishitu said:
hi, gracco.
can u tell me how upgrade your Qtek 9100 from WM5 to WM 6.1 step by step or give me some link. and how i make it with WM 6.5
thanks
Click to expand...
Click to collapse
you can update from 5.0 to 6.5 directly. .
first read this
http://forum.xda-developers.com/showthread.php?t=332320
after you done it, just download one ROM from this link
http://forum.xda-developers.com/showthread.php?t=492532
and that is that . .
p.s. for this you must have Windows XP and Active Sync 4.5
Help me whit a Qtek 9100
Hello. Can I use the Wizard Service too Qtek 9100l to change only one OS version from version 5.1 to 6.1 without change for SPL or IPL? I have a G4. Somebody help me to change the version in Windows Mobile 6.1 software. I mean this way can not use an upgrade program like "ROMUpdateUtility_Wizard_NoID.exe" because the connection to USB phone is down after the restart in Bootloader. Thanks in advance.
gracco said:
anyone can me answer?
Click to expand...
Click to collapse
yes,actually i have a qtek a9100 or htc wizard with windows mobile 6.5,and i think i´m very lucky because the rom works perfect! i downloaded from here,but i dont remember which one exactly,but leave me a message so i can send you by e-mail or something

Can i upgrade my HTC wiza200 to windows mobile 6.5?

hi all,
I have a 5 year old HTC T-mobile wiza200 mda that has windows mobile 5.0 running on it, can i install windows mobile 6.5 on it? would it work,i mean, is the mda stong enough or would the upgrade destroy the phone?
if i can upgrade, can i use Windows Mobile 6.5 for HTC Touch Pro Build 23529 version that i have downloaded or do i need a different version?
if i need a different version, where can i find the right one for my wiza200 mda?
if you can post a link to it that would be greatly appreciated!
thanks in advance.
JC.
Hi
just_inc. said:
hi all,
I have a 5 year old HTC T-mobile wiza200 mda that has windows mobile 5.0 running on it, can i install windows mobile 6.5 on it? would it work,i mean, is the mda stong enough or would the upgrade destroy the phone?
if i can upgrade, can i use Windows Mobile 6.5 for HTC Touch Pro Build 23529 version that i have downloaded or do i need a different version?
if i need a different version, where can i find the right one for my wiza200 mda?
if you can post a link to it that would be greatly appreciated!
thanks in advance.
JC.
Click to expand...
Click to collapse
1.-you can't use htc touch pro Rom
2.-You can upgrade but you need to have unlocked the cid first
3.-is g3 g4?
4.-...I have this rom in my Htc Wizard: Windos Mobile 6.5 Htc Wizard work well and is stable
wiza 200 upgrade
hi..
i have the same phone... wiza200 WindowsMobile 5.0, and its almost five years now.
i checked it from device info, Flash chip type: M-System G3
so its a g3, is it possible to upgrade to 6.0 or any higher version?
and how is it?
i checked and try to download "Windos Mobile 6.5 Htc Wizard" ....but i cant accessed it from rapidshare
thanks in advance...
need same help...
i have HTC wiza200 and i also wan to upgrade my Windows ..
is it possible ?
it is secure ?
pls give me suggetion....
need same help...
i have HTC wiza200 and i also wan to upgrade my Windows ..
is it possible ?
it is secure ?
pls give me suggetion....
I also have an HTC Wiza200 with Wince 6.1 in English.
I got an rom in Portuguese from FARIA. But when i'm updating, the phone reboots to the three colors screen and the updating software looses connection... How can i do the update to Win CE in Portuguese ? Or what am i doing wrong?
I have win 7 home premium 64 bit,
what do i need more...?
I do the same procedure for HTC 3600 and it works...
THANKS

Categories

Resources