Are there Unlock for Alpine? - PDA2, XDA IIi, 2020i General

i have been on ftp.xda-dev... there are Unlocks for S100 Magican, but not for Alpine, Qtek 2020i .... do they exist ????? thanks

for sim unlocking, there is a tool
for extended rom unlocking, no tool till date

what is extended rom ?

The Extended ROM (or ExtROM) is the hidden, protected part of the ROM which has all the customisations which your network provider can apply to the phone when you first start it (after a hard reset too). They do things like change the colours on the phone, add programs or settings, or restrict settings... You can alter the Extended ROM on your PC by 'cooking' it, and then uploading it to the phone with tools available on this site, but you can't see or read/write to the Extended ROM on the phone itself.
To unlock your phone and make it sim free (a 'sim unlock'), you can get pda_all_unlock-v1.3, which I am also attaching on this post. Open the ZIP file, and put pda_all_unlock-v1.3.exe onto your phone via ActiveSync. Run this program on your XDA, and after it's finished, you can use any SIM card in it (so you could sell it if you don't want it any more, or you can just use more than one SIM card in it yourself if you want!).
I hope this helps.

christopherwoods said:
To unlock your phone and make it sim free (a 'sim unlock'), you can get pda_all_unlock-v1.3, which I am also attaching on this post. Open the ZIP file, and put pda_all_unlock-v1.3.exe onto your phone via ActiveSync. Run this program on your XDA, and after it's finished, you can use any SIM card in it (so you could sell it if you don't want it any more, or you can just use more than one SIM card in it yourself if you want!).
Click to expand...
Click to collapse
Is this permanant or do you need to patch it on every cold reset???
Thanks
Kev

trubster86,
the sim unlock is permanent (survives hard resets and ROM upgrades). Once you've unlocked your phone, you can never "re-lock it".
Justin

Permanent, even if you re-flash the original firmware.

Related

Downgrading WinMob 5 to Win2003SE

Hi there
I'm trying to downgrade my Qtek9090. I have WinMob 5 and I want it to be the Rom from http://www.orange.ch/offers/orangePhones/spvM2000/spvM2000Rom?ts=1144157178509.
Now, I got the MaUpgradeUt_noID.exe and I did just use it like its written...
Now I have Win2003se but none of that stuff provided by Orange in this Rom (At the first start it said some stuff was missing and it xould be deleted). Then I tried again without the MaUpgradeUt_noID.exe and still get a country error...
Do I have to re-partition the memory like I did for the WM5 update?
Thx for answers...
greetz
Well for wm5 you most lickly got rid of your ext rom as you wanted it for storage.
So now there is no place to flash the extrom so the cabs that are part of the extrom do not run and thus you get no ORANGE related files.
What you need to do is create a new EXT rom partion and flash the rom again.
This time you can delete the radio.nbf and the NK.nbf and just leave the MS.nbf (it will be a lot faster).
First of all, thanks for the reply!
great...now, how do I do it? Do I need a special size of the rom?
Sorry to say this but.....
Please read wiki
Ta
For more info you can read here
omfg this looks like work..
Sorry MDAIIIUser I used the search button (but only for the forum, my bad)...But anyway, I know you are very busy just read some threads while waiting for an answer...But you're doing a great job...All of the people here in fact...
i'm also downgrading to WM2003SE according to the directions on wiki,
BUT i have 2 questions:
1. i bought my qtek 9090 as a stand-alone qtek9090 (so not combined with a provider). does this mean i don't need the Extended ROM?
2. i aksed this question in another topic aswell, but lateron i found that this topic is more acurate to my question..so sorry for that!
here's the question:
in the manual, it says I have to download my latest favorite WM2003SE ROM version (which in my case is the Dutch Qtek DANGA001 version 1.40.00, EXTROM 1.40.556),
and FROM that file i should copy the nk.nbf to my "\DOWNGRADE TO WM2003SE\" folder..
and THAT'S what seems impossible to me, since the Rom-update i downloaded is an .exe application, and not a .zip or .rar archive..
so how should i get/extract/copy the nk.nbf file out of this Rom-update .exe file..?
i simply skipped that step but now my device keeps crashing every minute (even DURING soft and hard resets!)
HELP!
spdfrx said:
and THAT'S what seems impossible to me, since the Rom-update i downloaded is an .exe application, and not a .zip or .rar archive..
so how should i get/extract/copy the nk.nbf file out of this Rom-update .exe file..?
Click to expand...
Click to collapse
execute the application and search in C:\Documents and settings\NAME\Local settings\Temp for your file.
if you don't find it, continue on your application and try again.
thats how i had to do extract the files from my swisscom update file (wich was an exe file too)
I downgraded my spv m2000 from wm5 to 2003 and everything is fine apart from the phone doesn't work.
It just says no service all the time, can anyone help please?
Thanks.
Check the radio version on the boot screeen to see if the device sees it.
Check that you see the version under settings.
Check that you have a sim in the device
Check that you not in flight mode.
ok now onit thanks for the quick reply
Be also aware that in the boot process the radio can sometimes not load, no know reason for this but fixed with a soft reset (stick up the hole).
My device sees the radio version on the boot screen (1.06.02)
I can see the version under settings and i have a sim in and flight mode is off but still no luck.
Shall i try another sim?
Try your sim in another phone (and another sim in that phone).
What do you see at the top of the screen (should be a bar chart with an x) if you have no link.
I put another sim in and now it's all fine GPRS and Phone works
thanks for the help.
Would the device be affected if you had a pin code on the sim?
The sim code is only for the sim card.
Without the sim pin code you can not unlock the sim card.
Thus the radio will not connect to a carrier and you will not beable to phone out.
A phone lock is a lock that stops you putting in a different sim card into the phone (thus you need to stay with the same carrier)
This is a device lock and needs to be unlocked on the device to be able to put in a different sim from a different carrier.
Tool found on wiki
I would think that your first sim is either no longer valid (out of date or is a pre-paid with no money) or it has a sim lock that you dont not have the pin code of and failed to mention that it asked you for it.
Anyway have fun with the BA and read wiki for more info.
Thanks

T-mobile MDA says "Data crashes" with SIM card ins

First I would like to thank everyone for posting their wealth of knowledge on these forums, I have learned a lot.
My problem is just as posted in the subject. I upgraded my phone to the 2.17 T-Mo custom ROM just as the instructions said. Ran cidunlock and everything before flashing. My phone works great as a PDA, but as soon as I put in a SIM card I get the "Data Crashes" error. I even tried several SIM cards from varying providers (T-Mobile, Cingular... etc).
I downloaded the 2.17 ROM from a link on these forums. Now Ihave downloaded the T-Mo original ship OS (from same link as the custom ROM), but it is not an exe and I have no idea how to use the files downloaded. I am not even sure that restoring the original OS will fix this problem. I was going to pay for the program from that imei-check.co.uk site, but unfortunately I can't get my imei (#06#) without a SIM in my phone.
I only found one post about this problem. One soultion offered was to copy thecidunlocked.bin to the phone, but the poster didn't say where to copy the file to on the phone.
I noticed a new program on the hompage here that will unlock any Universal. Will this work to fix my T-Mo MDA?
Will performing a SIM unlock solve this issue?
I did't want to try to SIM unlock or do anything else to my phone without further guidance from some helpful person. Trying not to screw my phone anymore than it is.
I am desperate for suggestions/solutions from anyone that has solved this issue.
Also, with so many different names for the Wizard, what name is the T-Mobile MDA commonly refered to? Is it the MDA Vario? This just makes me more confused about which programs apply to my phone.
Use lockiwiz 0.3a worked with my device after upgrading to qtek aku2.
Follow instructions here http://forum.xda-developers.com/viewtopic.php?t=50768
Re: T-mobile MDA says "Data crashes" with SIM card
earljg said:
First I would like to thank everyone for posting their wealth of knowledge on these forums, I have learned a lot.
My problem is just as posted in the subject. I upgraded my phone to the 2.17 T-Mo custom ROM just as the instructions said. Ran cidunlock and everything before flashing. My phone works great as a PDA, but as soon as I put in a SIM card I get the "Data Crashes" error. I even tried several SIM cards from varying providers (T-Mobile, Cingular... etc).
I downloaded the 2.17 ROM from a link on these forums. Now Ihave downloaded the T-Mo original ship OS (from same link as the custom ROM), but it is not an exe and I have no idea how to use the files downloaded. I am not even sure that restoring the original OS will fix this problem. I was going to pay for the program from that imei-check.co.uk site, but unfortunately I can't get my imei (#06#) without a SIM in my phone.
I only found one post about this problem. One soultion offered was to copy thecidunlocked.bin to the phone, but the poster didn't say where to copy the file to on the phone.
I noticed a new program on the hompage here that will unlock any Universal. Will this work to fix my T-Mo MDA?
Will performing a SIM unlock solve this issue?
I did't want to try to SIM unlock or do anything else to my phone without further guidance from some helpful person. Trying not to screw my phone anymore than it is.
I am desperate for suggestions/solutions from anyone that has solved this issue.
Also, with so many different names for the Wizard, what name is the T-Mobile MDA commonly refered to? Is it the MDA Vario? This just makes me more confused about which programs apply to my phone.
Click to expand...
Click to collapse
i have the same problem, i still could not get an answer from here. I have followed numerous tutorials done by others who have had a similar crash. restoring to original tmo rom did not help me. ran unlokwix03a, which gave me the unlock code.
So I did manage to get a unlock code but when I put in a diff sim from another carrier am not even getting the prompt to enter it. so anyone with a solution we realy could use your help.
kizo
I used Lokiwiz3a to unlock my custom T-Mo 2.17 ROM MDA phone. I am still getting the "Data Crashes..." error even when I insert a cingular SIM into my T-Mo device. I can't seem to get the input screen to enter the SIM code that I got from Lokiwiz. I even ran Lokiwiz twice, with my T-Mo SIM card inserted ("Data crashes" screen was on) and without it inserted. Then tried again with a cingular SIM and the same error message appears.
Can someone advise me in this issue again?
Thanks
I had the same issue and spent countless hours trying to correct the problem. I tried every Rom and unlocking software I could find. Nothing worked. I'm no expert but from what I have learned there seems to be an issue with the IMEI in the US T-Mobile MDA. A few weeks ago I started having problems with the phone so I went to HTC's US website and downloaded the original shipping ROM, flashed it to my phone, not a single problem. In fact the phone actually worked better. Since it worked so well I figured I'd try one of the cooked Roms. I could always go back to the original right? WRONG. I got the data cash screen and an expensive paper weight no matter what I Tried. I called T-mobile and Htc every day for a week. They were no help. Big surprise. The only solution offered by the two was to send the phone to HTC for repair. They said it would cost $38 US just to look at the phone plus any additional fees for repair. 7 to 10 days to figure out the problem and 7 to 10 days for repair. A few days ago I read that some people were using imei-check.co.uk to solve the problem. I decided to go for it. $38 and 5 minutes later, I know have a working phone. Screw T-mobile and HTC.To get the IMEI you need to take your sim card out, go to the COM manager and turn the phone off. Place the Sim card back in and and the data crash screen wont show up unless you turn the phone back on through the COM manager. Hope this helps.
It looks like occassionally it is fixed by going back to the original rom, but not always - then unlocking and reflashing.
Most success with this http://www.imei-check.co.uk/ cost 30-40 bucks but most cases seems to work.
Read this thread http://forum.xda-developers.com/viewtopic.php?t=43319
IMEI-Check.co.uk definitely works. I got the same data crash message after I upgraded to 2.17 and their solution worked immediately. BTW the IMEI is printed on the phone right underneath the battery. Whatever you do don't assume the IMEI printed on the box is the one on your phone.
Thanks for everyone's help!! I finally broke down and went to the IMEI site and paid for the program to fix it. My phone is working beautifully now!
Just in case everyone is wondering what I did before I decided to pay for the IMEI and wanted to try before buying a program...
Having the 2.17 ROM installed when I started to have this problem, I first decided to try the method suggested here:
http://forum.xda-developers.com/viewtopic.php?t=50768
That still came up with the "Data crashes..." error with both T-Mo and Cingular SIM cards inserted. The same as the method in the above link (Lokiwiz3a, etc...).
So then I decided to try an alternative method followed by in this thread:
http://forum.xda-developers.com/viewtopic.php?t=47848
Which involves downgrading, then unlocking, then upgrading. Also with no luck on removing the "Data crashes..." error. I tried inserting my SIM after the downgrade and running Lokiwiz02b and still same error message.
Then I finally broke down and paid for the IMEI unlock program as posted in this thread (suggested by meschle, and in many other threads):
http://forum.xda-developers.com/viewtopic.php?t=43319
If the two previous methods mentioned before the pay method do not work and you decide to pay for the IMEI unlock mentioned: PLEASE follow jt_armstrong's advice (mentioned in above post) for obtaining your phones IMEI # when ordering the program!!
Since I did it as a last resort, it was already too late for me to obtain the IMEI from my phone as the pay website suggests (dial *#06# on your phone). This is due to when I insert my SIM the "Data crashes..." message comes up and there is no way I could obtain my IMEI without looking at the label behind my battery.
All is well now after running the $38 program. I finally realized (with the help of the previous posters, and other threads in this great forum!!) I have exhausted all other options.
Unless you can wait for someone to come up with a definitive solution to this rare (from what I have read) problem, I highly recommend using IMEI unlocking program. I have been trying to find a solution for about 5 days in the forums and this was my last resort...
i got the same problem and fixed it with the paysites....BUT i know i could have fixed it without them...had i saved the locked_bkp.bin file that unlock software generated the first time...
If any of you has the file, they can figure out how to write it to the phone by reading out the .bat file that came with the lokiwiz...
If you tried to unlock it twice....forget about that because the second time the software actually overwrites the backed up file with the crashed one it reads from the phone...
Not to sound to dumb or nieve, i ran lokiwiz, it gave me my unlock code, but when I put a cingular sim in my tmobile device it never asked me for the code. The phone works with both my T-Mobile sim and a Cingular sim. Can I assume than that my Wizard is sim unlocked even though I never had to put in a code?
Not to sound to dumb or nieve, i ran lokiwiz, it gave me my unlock code, but when I put a cingular sim in my tmobile device it never asked me for the code. The phone works with both my T-Mobile sim and a Cingular sim. Can I assume than that my Wizard is sim unlocked even though I never had to put in a code?
Papa_I said:
Not to sound to dumb or nieve, i ran lokiwiz, it gave me my unlock code, but when I put a cingular sim in my tmobile device it never asked me for the code. The phone works with both my T-Mobile sim and a Cingular sim. Can I assume than that my Wizard is sim unlocked even though I never had to put in a code?
Click to expand...
Click to collapse
Sounds like it is unlocked to me, but I am no expert. Just figuring if you can use two different SIM cards (not form the same company) in a phone, then it is unlocked. That seems logical, but who knows, maybe T-Mobile isn't being logical and Cingular SIMs normally work with T-Mobile phones. I never actually tested that idea...
To those that find themselves in this situation i just want to tell you that i didn't have to pay to fix my phone. I simply used itsme's tools to flash a new CID block back to the phone (lucky for me that i had a backup of it before facing this problem)
The reason for this is checksum errors in CID block (last 8 bytes of the 64k section) which may occur from bad flashing process or, as in my case, for messing with SPL messages with mtty program.
So all you have to do (if you have a G3 DOC model) is make a backup of CID block before upgrading rom (machinagod's programs create that file automatically when CID unlocking - even if it generates write errors). If the accident happens then downgrade SPL/OS to version 1.06 or bellow and flash the backup CID
cheers
i have a t-mobile dash with the same problem, what can i do if i dont have the cid backup??
tramuyo said:
i have a t-mobile dash with the same problem, what can i do if i dont have the cid backup??
Click to expand...
Click to collapse
Get this application http://forum.xda-developers.com/showthread.php?t=295038 (version 0.3), read the CID block and check if the CID IMEI is same as the label one
downgrade SPL/OS to version 1.06 or bellow and flash the backup CID
Click to expand...
Click to collapse
how can i flash the backup cid ? is there any program because i only got 3 .bin-files and dont know what to do with them.
I have another question. What is the difference between the normal IMEI number and the CID-IMEI cause my device has 2 different ones.
peran281 said:
how can i flash the backup cid ? is there any program because i only got 3 .bin-files and dont know what to do with them.
I have another question. What is the difference between the normal IMEI number and the CID-IMEI cause my device has 2 different ones.
Click to expand...
Click to collapse
Where did you get those 3 bin files?
The IMEI is stored at two locations:
the gsm_data block and that's where the device reads it from when you browse the "Device Information" ("Identity" tab)
and the CID block as well where i believe that cprog.exe (the GSM app) reads it from
Now the "Data crashes" error might come from bad CID block checksum or from the existence of two different IMEI numbers of these two locations (i tested it )
Use my program again to read the gsm_data IMEI (use the "Read IMEI" button) and see what IMEI you get
Where did you get those 3 bin files?
Click to expand...
Click to collapse
i got these files from the lokiwiz tool cause i cid unlocked my device with it.
but since this step i can only flash t-mobile roms on my device but i have an o2 branded one. why?
i have in both locations the same imei i think.
What is the difference between the normal IMEI number and the CID-IMEI cause my device has 2 different ones.
Click to expand...
Click to collapse
did u mean this ?
but how can i get a imei which works ?

Total Novice Guide Please on Unlock/ROM

There many answers to my questions in the forums, but I need to understand a bit better, hence the special topic.
I am thinkin of getting an MDA Vario with Co-Pilot software, this would be on T-Mobile Network. (actaully an upgrade by a family member for me).
I am on Vodafone myself, so I would need to unlock it, what the difference between SIM lock and CID unlock ? Which do I need to do ?
Then I would want to get rid of all the T-mobile branding, am I right in thinking that would be via a ROM upgrade to a unbranded ROM ? Which is the most favoured ROM people go for ? Whats usually the differences between these branded and unbranded ROM's ?
Stupid question, but th Co-Piliot Software would not get effected my any of these updates would it ? Or does it come on a CD, so I just need to re-install it after all the updated ?
Thats alot of big questions I know, so now you know how confused my head is, any explanantion would be fantastic and help me understand what I would need to do.
Thanks a bunch.
So after more reading I got some answers.
SIM Lock - The lock put on by your mobile supplier, which prevents you using another carriers SIM card. Usually done as your getting the phone at a fraction of the actual cost.
CID Lock - The lock on the phone which prevents ROM updates, I believe it prevents other ROMS, so you can use the current suppliers update ROMS, but will not allow you to put a ROM of another supplier.
ROM's - So there ROM provided by mobile carrier's, for UK I found there is ones from O2, T-Mobile and Qtek, I still do not know what the differences are other then the branding.
I am on Vodafone and by chance found a ROM for Vodafone :-
http://s131209249.online.de/vodafone_software/9100.htm
So I am thinking maybe this would be the best option for me.
I still would like to hear opinons on ROM's, please PLEASE helppppppp.
I assume I CID unlock my T-mobile UK and then I can apply any ROM including the above Vodafone one.
Got my vario today locked to T-mobile UK. And it was a G4 chip.
IPP/SPL - 2.21.0001
OS - 2.24.2.6
I had no t-mobile SIM so stuck my vodafone SIM in, first asks for my personal SIM password, then it asks for unlock code.
At this point I ran lokiwiz03a, which ran but never gave me unlock code, mentioned something about not being able to copy some file and it might be in use.
So I copied EnableRapi.cab to my phone and ran EnableRapi.cab from File Explorer, that went fine (message about overwrite, said yes)
Then I ran LockiwizMsl.bat from desktop while being connected to ActiveSync and there it was the unlock code.
Entered worked fine.
As regards the ROM upgrade, my main reason was to lose all t-mobile crap, but found an easier way with ZERO risk:
First time ever you startup phone it does inital setup, the last step it beings to do an install, as soon as the install starts pull the battery out, then reboot. (Important to have the battery cover off already)
On reboot you should be able to go into the phone no setup screens this time, also ZERO customizations, yes means you need to do all the GPRS, MMS etc etc setting yourself, but that I am happy to do.
Hope this helps someone.

Splash screen freezing -> SOLUTION !!! DIY

Damn... I walked around and around and solution was all near me and able to do it myself...
Ok here´s how I done it.
First, I must explain what was the problem.
After update the firmware (not actually upgrade, I had the phone full of trash, so I decided to reflash same firmware v2.18 PTG), the Qtek 9100 / HTC Wizard freezed at 2nd splash screen (the one that shows OS versions IPL version, ect). Tried many different versions, upgraded to 2.24, 2.25, downgraded even to 1.6.7.3, but always same problem, freezed on second splash screen. I read many topics on xda-dev, and seen some people with same problem. Apparently there was 2 solutions. 1- send phone back to warranty. 2- write backup ROM from SD in bootloader.
Passed more then 15 hours asking for this SD backup everywhere, and COULDN´T find any help. Apparently no one had this "SD dump ROM Backup".
So here´s how I solved my problem
1- I tought that a SD backup was needed, and yes it is. But u can use your own phone and your own SD to do it.
2- Get a clean SD card (in qtek 9100 / Htc Wizard case is MiniSD) with 128MB (some people say 64MB, but I personally used a 128MB, maybe a 64MB is enough)
3- Kill (task manager) wescomm.exe (this is related with activesync installed on your PC). Insert the blank SD card on the phone.
4- Get your phone in bootloader mode. Like this : Phone powered off, press Camera button + Power On, will enter in bootloader mode (RGB screen).
5- Now connect your USB cable to your phone. And start MTTY_updateROM.exe (http://wiki.xda-developers.com/uploads/romupdate.rar). After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.
6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.
Thanks to all and hope this helps more people with this problem
I can get the MDA in a bootloader mode with the RGB screen but I can't figure out how to get the SD Image Boot. When I open updateROM, it only gives me the seletion of COM1 and COM3. I can't gete any farther, help plz. i really want to use my MDA
Adam
Adam, you missed a step
Kill wescomm.exe as described in step 3 and you will be able to access via USB.
3- Kill (task manager) wescomm.exe (this is related with activesync installed on your PC). Insert the blank SD card on the phone.
not work with me; so sad what i can do?
I did all yr step till n7 but after i roobot same problems;it frozeen on the page where show IPL SPL GSM OL;
ANY SUGGESTION?please help me
@nnnike i had the same problem as you did. ( getting stuck at the first splash screen) i jsut tryed this right now and greatly enough it did work !!! give it another shot it migh twork with you
i actually used my 2gig mini SD it wasnt clean ither
thank you so much for posting this Drug_Store. and for whoever worked on this. u guys are awsome
I did exactly what you do, but
Ive got message from Multi port tty:
r2sd all
***** user area size = 0x3BA00000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Cmd>
So, what is the next step? And did I doing something wrong?
You didn't get the proper security level to download a specific image
Cmd>
So said:
i also got the same error
Click to expand...
Click to collapse
CID unlock?
I believe that your phones aren't CID unlocked.
I think that only CID unlocked phones or inputing the BOOTLOADER password will allow to backup wizard to SD card
I've got the exact same problem, phone freezes at splash screen. Now I backed up a rom from a working cid-unlocked wizard, but after I tried loading it on my wizard it says 'don't allow update'. So what can I do now?
Awesome solution! My MDA vario is back from the dead!
Thank you for sharing this great solution with us
Thanks my phone is back!, now how can I get to use tha card again? I dont have a card reader for my pc, just the phone. Is ther something that I can use, because my device dont get any storage Card.
Rafase282 said:
Thanks my phone is back!, now how can I get to use tha card again? I dont have a card reader for my pc, just the phone. Is ther something that I can use, because my device dont get any storage Card.
Click to expand...
Click to collapse
I was forced to buy a multi-card reader to get my card back Fortunately that they are so cheap these days (less than 12€ for 31 diff cards)
Funny thing is that after formatting the card in Win2k the phone still asks if i wish to restore image when entering bootloader mode
cheers
hi
did you slove this your problem ?
i also got the same error
It stoppped asking to restore image when entering bootloader mode maybe because i've been using the card in normal PPC operations and the "r2sdall" area must have been overwritten
Yes, data remain at SD card. Probably need to insert in SD card reader and format under windows system.
About the errors while reading the data to SD, I remind, to try in a fully clean SD card (formatted completly), and yes, might require that your phone be CID unlocked, but that part can also be done easily.
The data that is written on the SD will remain hidden, and are like system files. That´s why no one can share the needed files over the internet or download somewhere. Because can´t get the files out of there. However, if u seen in your file explorer in your phone some file might appear on card root. But also not sure if can copy it from there and later apply on a card and do this procedure.
tjmvdz said:
I've got the exact same problem, phone freezes at splash screen. Now I backed up a rom from a working cid-unlocked wizard, but after I tried loading it on my wizard it says 'don't allow update'. So what can I do now?
Click to expand...
Click to collapse
Hello I think there is no way to restore a Sd backup on CID locked device.
I think the only possibility is to unlock CID with Imeicheck site (the process begin in bootloader mode) and then restore Sd image.
fla242;1114868
I think the only possibility is to unlock CID with Imeicheck site (the process begin in bootloader mode) and then restore Sd image.[/QUOTE said:
How it can be made?
Click to expand...
Click to collapse
Thanks a TON for the help. I went on with a little diff solution. Went upto step 4 and got the bootloader and then installed the new update from O2 and it worked.
(The step 5-7 somehow didn't work for me so I did this and it worked.)
hi all
i got problem to unlock cid on bootloader (other than imei check site)...
please help.
thanx
Hi i have a mda vario 1 ipl and spl 1.06 i have got it unlocked whit a code thad i have got from t-mobile but this don't work for me i get the message: ***** user area size = 0x3CA0000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
what can be the problem can anybody help me

Simlock to a specific sim card?

Hello,
I have a Kaiser locked by the operator.
The phone ONLY works with the original Sim card!
Does not work with cards from other operators, or even from the same operator.
I always get a message: "The SIM card is missing".
I already tried the several tutorials and tools to unlock it.
Even tried to change the ROM to recent versions.
Already tried differente versions of SPL... differente radio patches, different ROM's... 6.0, 6.1...
And no luck.
Never got that "Simlock" window that most tutorials talk about...
Every SIM card I try I get the "The SIM card is missing" message...
PDA features always work ok..
Any ideia?
Thank you so much!
Moved as not ROM Development.
http://forum.xda-developers.com/showthread.php?t=433835
dfelix said:
Hello,
I have a Kaiser locked by the operator.
The phone ONLY works with the original Sim card!
Does not work with cards from other operators, or even from the same operator.
I always get a message: "The SIM card is missing".
I already tried the several tutorials and tools to unlock it.
Even tried to change the ROM to recent versions.
Already tried differente versions of SPL... differente radio patches, different ROM's... 6.0, 6.1...
And no luck.
Never got that "Simlock" window that most tutorials talk about...
Every SIM card I try I get the "The SIM card is missing" message...
PDA features always work ok..
Any ideia?
Thank you so much!
Click to expand...
Click to collapse
It sounds like you have a sim card reader hardware issue, not a software unlock issue. Once you install a custom rom, your phone is unlocked. When you insert a sim from a different opperator, if the phone is locked, you will get a message like "sim card not supported" or something like that. Not "Sim card is missing". Try putting a small piece of paper behind the card when you close the sim card door. If that does not work, you may need to replace the reader.
j101399j said:
Try putting a small piece of paper behind the card when you close the sim card door. If that does not work, you may need to replace the reader.
Click to expand...
Click to collapse
The paper did not work...
Is replacis the reader a simple procedure?
Any ideia where i can find a new reader?
I guess my warranty was lost when I changed the ROM...
I'm Seconding the idea that you need something to help force better contact between the SIM card and the contacts inside the phone. I have had this problem before. one one of my Tilts, I just pushed down on the metal piece that covers the sim card...
sim card out, use your thumbnail to push down a bit... until the metal comes in contact with the contacts below. you should see that there is now a slight dip in the metal. then slide the sim card in.
Others have suggested a bit of paper between the sim and metal holder.
I tested both ways...
In last attempt I used a quite ammout of paper between metal and sim!
Almost could not close the door.
Already tried 4 different SIM's....
3 from Vodafone... and it's curious but they all look different in the contacts.
And the one from the original operator.
There is a thread to revert back to stock for warranty purpose check the sticky in ROM Development.
Yes, follow the process in the Wiki to return to the OEM settings, SPL and ROM. Then take it back for warrabty. MAKE SURE AND READ THE ENTIRE WIKI; if you miss one part, they will not warranty the phone. As for replacing the sim reader, it's not hard, you just need to follow the teardown and rebuild steps 100%, also in wiki.
Seen exactly the same (100% same syptoms to the letter) problem as this on 2 HTC Diamonds unlocked with olipro software.
Has the Kaiser been unlocked by the olipro kaiser unlocker ?
The 2 Diamonds had to go into service centre as the problem is linked to the block that is flashed during unlocking & mtty, rom flashing & re-running unlocking software done no good.
Mister B said:
Seen exactly the same (100% same syptoms to the letter) problem as this on 2 HTC Diamonds unlocked with olipro software.
Has the Kaiser been unlocked by the olipro kaiser unlocker ?
Click to expand...
Click to collapse
Yes...
I followed the tutorial step by step...
Then, the SIM problems happened...
After that, I tried it again with different hardSPL versions... and a the 6.1 ROM.
Both Portuguese and English version and no luck...
Now the problem is that I can't find the WM 6.0 portuguese ROM from my operator to revert it...
I guess I'll need to replace the reader myself..

Categories

Resources