Database Develop

qtek_kpn_nk_1.22.00+extrom_1.22.731+radio_1.08.00

I have downloaded this, and I would like to upgrade my qtek to this release. Can I just run the BaUpgradeUT or is there additional work that I would need to do. I bought it in the UK and its SIM unlocked. I have already upgraded the Radio ROM to 1.08.
my devicedata.txt reads as follows
PH20B 0 B WWE E DANGA001 1.22.00 0 0 1.22.162 1.06.00 06.00
NOTE: This was just before the Radio 1.08 upgrade.
What I can't seem to understand is if I need to do some cooking especially considering that my device is a QTEK and is WWE
I would appreciate your responses.

Hi NinjaMan. Where did you get this update? Please let me know how I can get same update. Thank you for you help.
[email protected]

Please browse the forum, it's all here...
To the both of you, read my thread here:
http://forum.xda-developers.com/viewtopic.php?t=18128
It's all in there...easy heh?

Frontpage, I downloaded it from the FTP site here, however there has been some problem were someone has accidentally/deliberately deleted most of the files. However I just tried uploading the file back but got an "Upload failed" error. Basically, I couldn't create a directory to upload to nor could I upload to an already created director. I wil try and figure out another way to get you the file.
HappyGoat, believe me, I have read that thread, and I have also read the wiki getting started, this is how I upgraded to the versions displayed in my signature. The reason why I asked the question is because I cannot see the answer in the WIKI getting started or in your thread. This could be because I am DIM, which I don't have a problem accepting. Nonetheless, I would appreciate some help even if it a yes or no to the question I originally posted.
If someone with more knowledge tells me if it is possible for me to just run the upgrade based on the information I have provided in my original post, the plan would be to install and give my feedback as to performance. I just don't want to do it unless I am confident it would work.
HappyGoat, if you know the answer then please share, if the answer is in the thread you posted perhaps you can point me specifically to its whereabouts in the thread. I can't see it

the complete kpn files are in the root of the ftp site
However i didn't manage to install using baupgrade.
There was a folder in extended roms with the extended rom files from kpn. With the util to unlock and unhide the extended rom directory on your pda you be able to delete the old files and replace the kpn extended rom files. After that you can do a hard reboot and you have the kpn version. However it is better to edit the extended rom files a bit if you are not using KPN telecom as provider because it has some setupfiles that auto setup to kpn as provider. GPRS and MMS.
Ok, now i need some help
I disassembled baupgrade.exe and RUU.dll
Anyone can help change it a bit so it stops checking language and provider ¿ I think only baupgrade needs to be changed because ruu.dll is th file that contain's the routines to upgrade and reboot and get pda info and place's it into bootloader mode.

Looks to me that the only real difference, is the Extended ROM version...and as you probably know, the Ext. ROM contains mostly files that are put there by the Telco's.
What is does read in the thread I gave you, is that MDAIIIuser pulled this complete package apart and we all agreed that the contents of the Ext. ROM version were not shockingly different to the one you have right now...
Additionally, you could end up with a phone with dutch settings, KPN spash, and other custom KPN/dutch things. So, in my point of view, it is not worth the trouble.
But technically, you should have no problem upgrading, as the KPN ROM is WWE as well.
Hope that helps.
And eh, what is a "DIM"...?

Thanks Vastloper and Thanks HapyGoat.
O.K if the Real difference is in the Extended ROM version, then you gusys are probably right - its not worth the trouble. I don't really have any issues with my current setup apart from some bluetooth problems.
One last question - Is it worth upgrading my bluetooth to 3900. What are your experiences with 3900

bluetooth
If your bluetooth headset is making crackling noise when it is away more then 20 cm from your device then it is worth upgrading.
You need the bt3900 upgrade
ftp://xda:[email protected]/BlueAngel/Bleutooth CABS/BroadcomCorp_BT1.0.0.3900.cab
After installing it you also need BA_OEM_AudioGW.CAB
http://forum.xda-developers.com/download.php?id=3320
this is for better audio.

Also, this is covered in several threads on this forum...the jury is still out as people experience different things for some reason.

Thanks Guys, appreciate your help. I do in fact experiencing the crackling noise, but I thought it could be to do with my BT Headset which is a cheap no name model.
I will give 3900 a go.
Thanks again guys

Urgent advice on what to do

Hi,
I've flashed my Vario with the Qtek update that has Exchange push. The thing is have I done the right thing, I just unlocked it and CID and then flashed it.
Having read the forums a bit it seems i should have preserved the T-Mobile radio update somehow and whatever else? How can I do this and also can someone direct me to the last release of the T-Mobile update as they have withdrawn it from the Website but if I just need the radio out of the ROM then it should not be a problem.
Please advise!!!

i dont understand why you need radio from t-bomile :roll:

I read that it has a newer radio version. From reading what other people have done it seems they've used the Qtek ROM but kept other aspects using a thing called aWizard which i havent.

You can run just about any ROM/Radio ROM mixture you want. I’m not sure what you’re worried about? Are you actually experiencing a problem? You didn’t mention that the device was running abnormally. If you have read of others using a diff Radio ROM it’s not because that’s what you’re “supposed” to do but rather others feeling that they get better results by using diff versions.
For instance, I have the latest test ROM on my 9100 and the radio signal was crap with the 1.13.x radio ROM so I downgraded to the previous qtek version. Then just for ****s & giggles I loaded the latest Cingular radio ROM and have found that this combination works best for me. My service is through Tmobile and I have not had a problem running any ROM or radio ROM just some work better than others FOR ME. It’s up to you to decide which combination you like best.
Hope that helps.

I like that... I need to remember this one "for ****s and giggles".

Need to go back to original T-mobile WM5 ROM, is that possible?!

I've searched the forum and the wiki, and there's is still a very good chance that the answer to my question is out there, but couldn't find it, so here it is:
I flashed my phone with one of the WM6 ROMS found in this forum and it all works great. Unfortunately, I have some hardware problem, so I want to bring the phone in for repair at the T-mobile shop... They don't really need to turn on the phone to fix the hardware I guess, but nevertheless I'd rather have the original T-mobile Dutch ROM restored before I send it in. Is that at all possible? I've seen a lot of posts referring to websites where you can get a complete original ROM and just have to flash it, but T-mobile only provides updates as far as I can see. Can anyone help me?

http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html try this

Reverting back to HTC ROM and SPL for warranty return?

At the point I am I need the help of experienced Users from the community.
I flashed a original HTC Wings (S730) with WM 6.1 ROM. It runs perfectly until I got a hardware problem (radio) . This is the reason I have to send it back to the official service.
Therefore I tried to go back to an official ROM from the http://wiki.xda-developers.com/index.php?pagename=WINGS_WM61_Alcaline
At first I flashed the earlier backuped Bootloder via sspl-0.91-wings.exe. This seems to be okay. But as I tried to flash an official ROM from the site mentioned above, during the flashing process I've got the note 'ERROR 294 Invalid vendor ID'. What was wrong? Did I forget any step?
Please, is there anyone who can describe the correct way back to 'warranty' for a newbie?
Thanx a lot.

have you tried all the ROM's? there is one prerelease and two release ROM's.. try both of the release roms, they might be for different production models/locations.

I tried both official released ROM's (signed as 'Ship'), not the prerelease version.

and if you first flash the shiped rom (with hardspl) and when done flash the back-up of the spl

With reference to an earlier statement of bigflavour in the thread http://forum.xda-developers.com/showthread.php?t=383617&page=17
I flashed back the original SPL at first.

Too bad It seems to be that I have a new problem now. Few minutes ago I have tried to reinstall hardSPL on the device via the well known sspl-0.91-wings.exe running on the Wings. But as I started the sspl, the device shows on the display that 'Access denied....is not digitally signed with a trusted certificate'.
Thereupon I thought I had to 'application_unlock' the device. After running the SDA_App...Unlock on my PC the display message shows succesful unlocking process. B U T, the sspl doesn't run as before.
Now, I'm totally confused. What has happened??

It's flavor, and unfortunately, I have no idea how to help you.

Probably tried the European english's spelling hehe.
Also This does seem like an odd problem, have you tried for kicks doing the factory reset to see if it will reset some of the registry and maybe fix your issues? I dont know anything about the spl's since I have no need to upgrade to 6.1, I wouldnt imagine it causing any more damage but again I dont know what all was done. I havnt followed those threads for a long time.

Thanx a lot. Apparently, the hint to make a hard reset hits the mark. Now I flashed back the HardSPL. So I'm back at the starting line . Does anyone knows if the official ROM from the http://wiki.xda-developers.com/index..._WM61_Alcaline is the latest one and can I use it for the warranty return?
Or should I look for an original German HTC ROM?

I was a little bit to fast. I will need a German ROM definitely, because the ROM from the Wiki doesn't include a the german language option.
Is there anyone who can help me with a original HTC S730 ROM for the german market?
Thank you in advance.

Hallo HSN,
if you give me a introduction how I backup my ROM, you can have my one. I own a German HTC S730. But I am confused when I read all threads about flashing etc....
One page introduction how to back up and you can have my one.
But I think that the Repair center here in Germany, doesn't care about the Rom you have installed.

Official HTC rom for diamond

Hi, I'm pretty new to this flashing business so go easy on me! I know there are a lot of roms out there but I'm finding it tricky to pick out some of the good ones. In the meantime I would just like to put the updated stock HTC rom on there as I've got the ghastly tmobile one on my MDA Compact IV.
Now, to my understanding I need hardspl for cooked roms, but for official roms i wont need. If this is the case, how is it done? Could anyone shed some light on this??
Thanks

You might still need an unsigned hardspl as the original HTC rom won't be for your region or operator.
Best thing is to try an flash a ROM to your phone. If you get an error message then you know you'll need to change your hardspl.

i tried the official htc rom without hardspl and it didnt work. Ive upgraded to signed hardspl now, do u think it should work?