I just upgraded my Rom for the x time, this time my touch screen will no longer work in landscape. I downgraded to a ROM that used to work, and on that ROM my touchscreen also does not work in landscape mode. Is this a software thing or a result of throwing the phone against the wall to many times? i guess it's time for an 8525....
Any ideas how to get the touchscreen working again?
e.
same problem for me !
It's not switching to lanscape? While opening keys? Or just turning off?
If it's able to be switched with software way (Settings -> Screen -> Landscape), then this is a hardware problem.
Wizars has a magnetic sensor to detect keys sliding, try to check it (use an external magnet).
If screen turning off after sliding the keys, the flat cable is damaged.
Related
Unfortunately the display of my Diamond broke and now i can't use it anymore (touchscreen didn't work - phone still works (booting, ringing etc)). I want to make a backup with Active Sync and MyMobiler, but everytime I connect the Diamond with my PC it only starts the access to the in-build flash-memory. I cannot change the behavoir for starting in Active Sync-Mode on Diamond.
What can I do?
Screen acting weird.
I have a problem with my screen too. Sometimes I cant use my touchscreen anymore. When I turn off the screen and wait a little bit I can use it again. But lately another problem has occurred, my screen keeps on loosing its alignment.
Its almost like my screen is dying...
i recently had the same problem...my fone was fully functioning all apart from my touch screen itself... i had to painfully keep runing the screen alignment an now it is fine
The only solution I could think of would be to put a registry file containing the ActiveSync setting [instead of 'connect as removable drive'] onto the phone and try to start it using the hardware buttons.
Unfortunately, I couldn't get into the start menu without the stylus. But the hardware buttons allow you to scroll through the TouchFLO tabs so you're able to access the programs tab. Maybe you've assigned explorer or activesync to one of those buttons? If not, you're able to assign one even w/o the stylus. I failed to re-enable the settings tab so I don't know what's on it. Maybe that one helps, too.
When you connect your device to your PC you can change you connection optons with the hardware buttons. This way you can set it to activesync. this has also been my solution to get to the screen alignment settings via mymobiler. But now I need to get a stock dutch SPL so I can return my phone to repair the screen. I dont carry my laptop around at all times...
Recently my Tilt started acting up, when in Portrait Mode the touch screen does not work. But when I slide the keyboard out and it goes to Landscape Mode the touch screen works. What could it be?
I performed a Hard Reset to try and fix the problem..
but nothing. It still persists.
Any suggestions and information would be appreciated.
This could be a problem with the cable connecting the LCD to the main unit... i think its called LCM connector or flex cable.
This cable has to move everytime you slide open the keyboard, so after a lot of use, the cables dont last and can cost LCD not working, touch not working, earpeice not working, LED not working, etc... could be just a loose connection also.
Have it checked out... and hope its something else not the cables
Hi,
Xperia X1 is three weeks past warranty. Touch screen suddenly stopped working; Display screen still works fine with keyboard in or out. All hardware buttons and keyboard buttons worked, phone worked OK, it was just the touchscreen that was dead. Never had any display problems when sliding keyboard in and out like I have read in here.
HOWEVER...
My mobile Tech Support told me to reset and now all I have is the initial Windows boot screen that says 'Tap the screen to setup...". WTF? Of course when I tap the screen nothing happens.
Is there a key or button combination I can use to invoke the setup routine? Is there anyway to connect it to a PC and control it? Be nice to get the phone back to working, I can live without the touchscreen for now.
There could be an issue of the flex cable being loose. You could try and open your X1 and re-attach the flex cable and hope it solves the issue.
There are some videos out there that shows you how to do it
I have recently purchased this phone via swappa and haven't had any issues prior to this and that has been three weeks (other than a light leak).
The issue that is happening is the LCD will not turn on. When the phone is unlocked via knock on or power button you can move your finger over where the lock circle would be and feel the vibrations showing that it does register the touch. Then usually I would just hold the power button till it rebooted and this would sometimes fix the problem, on a side note the boot LG logo and boot animation do not show up during this time simply the lock screen would randomly appear.
That is problem, now on to what I tried to fix it. I have put on an entirely different rom and the problem persists, I have also flashed a different kernel on the stock rom with no avail. I at first thought it could be due to a faulty proximity sensor, but the last time the screen was on I checked it with sensor box. One way I have been able to reproduce the problem is after locking it putting it in my pocket and waiting around five minutes, this then will make it so the LCD does not turn on ( Which makes it seem like it has something to do with deep sleep). Also something I just found since I was actually able to find the power off button, the screen also won't turn on when the phone is off and plugged into the charger (this makes it seem like hardware issue). It seems like as long as I keep the phone from going to deep sleep the LCD will turn back on.
Some of this makes it seem like a software issue other things make it seem like a hardware issue. I just was wondering if anyone had any ideas or if I need to buy a new screen, if the mobo is bad, or if I could fix this with software. Any and all ideas are welcome.
Thank you all in advance.
I have some problem with touchsreen. All work fine until I put my device in pocket (or press him). After I take out my device I can't unlock him, and me need turn off screen and turn on him several times, until touchsreen stabilized.
Who have simmilar problem with touchscreen?
same here :/
same here. I can click few times right after I turn on the screen but only for one second.
same here... tried reflashing etc. via *#7353# -> dot mode, I can see that a spot is being "pressed" in the middle of the display and 1,5cm down from the top. And constantly, thus another touch is not possible. Usually after locking the phone and turning the display on again it works for some time. But even in the recovery it doenst work... sometimes... under key test. Randomly the touchscreen is being pressed.
Had no problems until now... always had a screen protector foil on, but even with a new one and without one it doenst work. Did not dropped my phone, neither I have screen cracks etc...
Any suggestions?