Hello at all,
I found a very very good program, i hope you understand, my english is so much bad.
I discovered a mad program. It makes an automatic key lock, a Bildschirmschoner, if that mobile phone is in the Standby with analog clock etc. and one can let flash with missed calls and SMS the orange LED. I love it.
Take a look here: http://maniac.fschreiner.de
Go to downloads and automatic keylock
Name: Keylock_WM5
Language in english too
It is the best and useful program I found at long time to search.
Very nice tool. Should have been included by M$ at the very beginning! Many thanks!
Related
Hi,
under setting - system-displaylight-Battery
(not quite sure whether this is 100% correct because I am using the german version Einstellung-System-Beleuchtung-Akkubetrieb).
It is possible to set for the background light of the display the delay timer until the light dims down to safe battery.
The standard is 10s, I would like to use 30s.
So far so good, I am able to do the setting to 30s, but after a soft reset or after switching off/on the Kaiser there is again the default setting of 10s.
Do I miss any other preset of this battery safing function?
Any possiilities in Kaiser tweak or Registery setting?
So far I have not installed any other "System tool" for controlling Profiles or anything like that (I have the bluetooth patch, the new camera and album, tomtom, mobipocket, but those applications should not interfear with this system setting)
Best regards,
Claus
PS: I am using the Kaiser since a couple of days - great device - but this is my very 1st WM device, I was using the last years UIQ2 and UIQ3 devices from SE, therefore please forgive any newbie questions
no big news
dingolino said:
Hi,
under setting - system-displaylight-Battery
(not quite sure whether this is 100% correct because I am using the german version Einstellung-System-Beleuchtung-Akkubetrieb).
It is possible to set for the background light of the display the delay timer until the light dims down to safe battery.
The standard is 10s, I would like to use 30s.
So far so good, I am able to do the setting to 30s, but after a soft reset or after switching off/on the Kaiser there is again the default setting of 10s.
Do I miss any other preset of this battery safing function?
Any possiilities in Kaiser tweak or Registery setting?
So far I have not installed any other "System tool" for controlling Profiles or anything like that (I have the bluetooth patch, the new camera and album, tomtom, mobipocket, but those applications should not interfear with this system setting)
Best regards,
Claus
PS: I am using the Kaiser since a couple of days - great device - but this is my very 1st WM device, I was using the last years UIQ2 and UIQ3 devices from SE, therefore please forgive any newbie questions
Click to expand...
Click to collapse
Congrats! you have hit the same problem as many of us... I don't quite get this to work properly and didn't find any hint yet, so i went different way - disabled backlight and enabled screen turning off in settings -> system -> power (where you can see the battery bar with percentage)
Hope this helps at least a bit.
At least I am not alone in the dark
Many thanks for the reply.
Claus
PS: Why only "many of us" and not all of us?
dingolino said:
At least I am not alone in the dark
Many thanks for the reply.
Claus
PS: Why only "many of us" and not all of us?
Click to expand...
Click to collapse
The others didn't realize they have the same issue yet
I solved it now with Phone Weaver a Profil manager.
http://www.sbsh.net/
I am able to set this parameter and now the easy thing is that after a restart of the phone I just enable my prefered Profil and with the Profil I have also my setting for the background light.
Claus
Hi, everybody
after upgrading to WM 6.1, i noticed that Filter Calls always displays just the missed calls, that is I have ti tell him each time that I want to see All Calls, however next time I open Call / Filters, again I can see only missed calls.
what should be the problem?
thank you.
loveumaryii said:
Wise man have their mouths in their hearts, fools have their hearts in their mouths.-------------------------Our website offer Fast and Secure wow powerleveling service. 60-70, Cheap 1-70. The Professional ! Powerlevel wow gold now. WOrld of warcraft Power Leveling bloom of true love associated with this time of year!
Click to expand...
Click to collapse
You're going down spammer!!!
Smart thing to quote his entire post including his links
Same problem. Does any one know how to solve it
Me too, check the registry did not find the correct registry key to toggle to all calls. Anyone can help?
Same annoying bug here too..
Just browsed through the registry, but I couldn't seem to locate the proper key(s).
I have some minor problems with my Kaiser and after searching the forum I'm really tired now, so please if you are willing to help, than do it. If not, than just don't post here and move along, thanks.
Yes, I used Google to search the forum and I have several registry tweakers.
1. How to remove the operator logo from the dialler screen? I mean not change it, remove and thus free the space it occupies.
2. How to replace the dialler keypad with a smaller keypad or a keyboard? Or at least make the keypad hidden.
3. I like the SMS delivery notification, but my old SE K750 is has so that the messages are just noted as delivered, no delivery SMS arrives, this is much more convenient.
4. How to make SMS the default messaging method rather than MMS?
5. This one really annoys me - How to ger rid of constant Connectivity warnings in the upper tab? They are sometimes noted as "E" icons, sometimes "G".
6. How to remove the connection sound, I mean when the Kaiser connects with ActiveSync?
Thanks for your help, moving from Palm is a real shock.
p.s.: If you feel very generous, please recommend your favourite skinning/HTC Home adjusting application. I already have HTC Home Customizer, but I find it not powerful enough. And as a task swithich I use Magic Button, is there anything better?
http://forum.xda-developers.com/showthread.php?t=314615
ChumleyEX said:
http://forum.xda-developers.com/showthread.php?t=314615
Click to expand...
Click to collapse
Good idea, I'v always searched through forums.
This is a collection of registry tweaks to allow greater control over the notifications in WM, including the ability to prevent repeating sounds for reminders. What it does is enable the controls in "Sounds & Notifications" that are normally unavailable for several types of notification.
It's a further enhancement of Juggalo_x's enhanced notifications, which has never been updated or particularly well explained (at least not on this website!) ... I have also included the low battery tweak, as suggested by juiceppc in that thread.
Large credit goes to fredjones32 for this guide with an explanation of the registry values and how the repeat check box can be enabled.
These are the notifications included:
ActiveSync: Begin sync
ActiveSync: End sync
Beam: Autoreceive
Connection disconnected
Connection established
Low battery
Messaging: Downloading MMS
Messaging: MMS downloaded
Messaging: MMS sent
Messaging: New e-mail message
Messaging: New MMS
Messaging: New MMS report
Messaging: New text message
Messaging: Sending MMS
Phone: Missed call
Phone: Voice mail
QuickGPS
Reminders
Wireless network detected
NB: Installing this CAB will turn off all notifications for all of the above events. If you go into Sounds & Notifications you will be able to turn on the ones you want again. This happens because the 'repeat' checkbox cannot be enabled without changing the registry value that controls which notifications are set. It is difficult to preserve the previous values during a simple CAB installation - but if anyone knows of a way please let me know. Detailed settings, for example sound file names, are not lost.
thanks mate
Hi Dave!
Thanks for this great piece of enhancement for all of our diamonds
I'm going to look into it!
Have a great weekend
Regards
Jeroen
Thanks Jeroen, let me know what you think.
you have a good one too!
Davey101 said:
Thanks Jeroen, let me know what you think.
you have a good one too!
Click to expand...
Click to collapse
Hi Dave! Thanks for your reply
I tested it yesterday...it's working great, except for one thing
I'd configured the notifications for text messages. I used the option repeat which was also available, so than I wont have to miss the alert about my messages...
But what happened, I heard every ten seconds my alert, I opened my message and It just went on and on and on....even though I already opened and read my text....that's quite strange/odd.....(hope you'll understand what I mean)
Did you had same behaviour on your device??
For the rest..I really really found it useful!
Many thanks again and I hope everybody is going to like it, just as I do!
Cheers
Jeroen
Hi Jeroen,
I don't use the repeat setting - I was mainly interested in being able to turn the repeat off for reminders! I use SPB Phone Suite on my phone, which allows you to configure sounds that repeat every few minutes until the original notification has been dismissed. The beauty of that system is that it is all configurable by profile, so when the phone switches itself into night mode the repeating sounds are turned off. It's not free but there must be some alternatives.
I've just had a play with the normal repeating sounds and you're right, they're particularly ****ing useless.
thanks I really needed that
Davey 101,
Thank you for compilations.
Davey,
Thanks for this application. I've used a couple of your applications/suggestions before (I can't remember which one - bluetooth perhaps) and they all work great. Thanks for your great contribution.
By the way, I have installed this and it works on WM6.5 too.
Galvatron said:
Davey 101,
Thank you for compilations.
Click to expand...
Click to collapse
mitsi said:
Davey,
Thanks for this application. I've used a couple of your applications/suggestions before (I can't remember which one - bluetooth perhaps) and they all work great. Thanks for your great contribution.
By the way, I have installed this and it works on WM6.5 too.
Click to expand...
Click to collapse
Thanks, that means a lot.
thank you for developing this. now i won't have to go climb a bell tower. those repetitive reminders were more than just annoying while i was on a call driving and couldn't shut it of.
thanks again.
Turn off led
Davey101 how to turn off led light notifications, because this .cab is only unblocking options
any-way of making this work when phone is turned to vibrate mode? works great when phone is in ring mode for me!
I love my Kaiser, I will not trade it in for a Fuze. I am however set back with questions unanswered. I'll enlighten you.....
1) I have been using an app called "Where is My Phone". I love this app. There is a certain feature I am quite curious about that acts as a macro. When you SMS the phone with a certain command as the text, it triggers a macro to work. This is very interesting to me. I am aware that there is a program running in the background to check for such a text request, but my question is, are there other programs out there that will let you run your own macros on such a text requests???
2) I am also running the Inesoft program on my phone. I absolutely love the dialer, however, once the dialer has been used and a call is placed, the default dialer pops up... very sad since I havn't been able to find a dialer skin that I like. (yes, I have searched everywhere and found them all) Is there a way to set the inesoft dialer as the default dialer on my Kaiser? This would be very useful, because I cant just tap and hold the "1" button on my inesoft dialer to activate retrieving my phones voicemail messages.
This forum is my lifeline to the outside world when it comes to my Phone and i thank you all in advance.
uhm as for your first question, I'm not too sure if I can answer it. I do use an app called mobliza that runs in the background. it's basically like an away message program for SMS. it also has a feature that allows it to carry on a conversation with people who text you. go to tiltmobility.com to find the download.
as for your second question, I don't think there is any way to make it your default dialer unless it's cooked into a ROM.
actually, my first question looks confusing... what i want to do is get my phone to perform actions when i sms it. if you look at "where is my phone", its an app that sends you the gps coords, with a google maps hyperlink of your cell phones location when you send it a certain text.
As for part 2, I guess Ill just cross my fingers and hope someone cooks up a rom. thats the best dialer skin ive seen. finger friendly, big, plain, simple.....
viol8tion said:
As for part 2, I guess Ill just cross my fingers and hope someone cooks up a rom. thats the best dialer skin ive seen. finger friendly, big, plain, simple.....
Click to expand...
Click to collapse
I do not think xda allows roms with commercial software in the forums, as this would be considered warez, unless they just include the shareware version, which would be useless as it requires you to purchase after trial period. Maybe you can download a kitchen and integrate the software into your rom, shouldn't be that difficult.
You could provide the software to the chef of your favorite rom and ask him kindly to brew it in for you. As long as the software are fully available for download its no problem adding it to any rom. Reason why its not done are that people have to buy to fully take advantage of the software and no chef is going to force something like that on you. There has been payware on certain rom from some of the most known chef`s in here, but its very rare and if so its because the software been brand new or killing good.
The thought of brew this in case the device is stolen by someone are good. Cause if the thief are not an advance user chance of getting it back are good even after a hard reset
I used to use inesoft address book and if I can remember correctly, there is a setting where you can make the dialer and history the default.
viol8tion said:
I love my Kaiser, I will not trade it in for a Fuze. I am however set back with questions unanswered. I'll enlighten you.....
1) I have been using an app called "Where is My Phone". I love this app. There is a certain feature I am quite curious about that acts as a macro. When you SMS the phone with a certain command as the text, it triggers a macro to work. This is very interesting to me. I am aware that there is a program running in the background to check for such a text request, but my question is, are there other programs out there that will let you run your own macros on such a text requests???
2) I am also running the Inesoft program on my phone. I absolutely love the dialer, however, once the dialer has been used and a call is placed, the default dialer pops up... very sad since I havn't been able to find a dialer skin that I like. (yes, I have searched everywhere and found them all) Is there a way to set the inesoft dialer as the default dialer on my Kaiser? This would be very useful, because I cant just tap and hold the "1" button on my inesoft dialer to activate retrieving my phones voicemail messages.
This forum is my lifeline to the outside world when it comes to my Phone and i thank you all in advance.
Click to expand...
Click to collapse
yup, i think i came across that program, where you text your mobile with predefined commands and when your cell picks it up it runs the application or script. One thing i forgot the name, but i think its freeware, if my poor memory serves me right. Damn, anyway it stays on your homescreen, just a small icon on the lower part.
The developers also programmed the location based application launcher based on what cell radio tower you are on.