ActiveSync 4.2 on MDA - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I cannot find my Activesyn on my MDA. I used both File Explorer and Total Commander. I last synced on 9/18 and it worked fine. Now, I cannot connect to my laptop and I think something may have happened to my activesyn on my MDA. It is installed on my PC and seems to be working OK. However, when I try to connect my MDA to my PC, my PC cannot locate my MDA Phone. Is there a way that I can reload Activesyn to my MDA? I still get Activesyn to show up in my programs that are running in memory on my MDA.
Thanks for your help!

ActiveSYnc
You should have a shortcut ActiveSync under folder "\Windows\Start Menu\Program" of your MDA device.
Usually I launch ActiveSync from Today/Programs menu.
If the program doesn't exist you shoud re-install ActiveSync on your PC and then re-sync with your PDA.
Bye.

asctony said:
I cannot find my Activesyn on my MDA. I used both File Explorer and Total Commander. I last synced on 9/18 and it worked fine. Now, I cannot connect to my laptop and I think something may have happened to my activesyn on my MDA. It is installed on my PC and seems to be working OK. However, when I try to connect my MDA to my PC, my PC cannot locate my MDA Phone. Is there a way that I can reload Activesyn to my MDA? I still get Activesyn to show up in my programs that are running in memory on my MDA.
Thanks for your help!
Click to expand...
Click to collapse
did you install any firewall on your PC?

I have disabled my Firewall, AVG and Spysweeper before I tried to connect to the MDA.
I do not have a shortcut on my MDA for ActiveSync and I have checked the Startup folder, too. For some reason ActiveSync is not installed on my MDA. I have uninstalled ActiveSync on my PC and then did an Install of ActiveSync on my PC. Then I tried again to have the MDA recognized by my PC.
The PC recognized the MDA but when I try to have ActiveSync Connect to the MDA it Fails. I have run the Trouble Shooter and it does not find any problems.
I am at a complete loss.
Thanks for your inputs. I greatly appreciate your time and effort to help me.

I had problems same as you describe it, with sygate firewall and disableing didn't make any difference. Only after I shut it down my active sync was able to syncronize.

LittleCannon said:
I had problems same as you describe it, with sygate firewall and disabling didn't make any difference. Only after I shut it down my active sync was able to synchronize.
Click to expand...
Click to collapse
I did mean to say, 'shut it down' instead of disabling Sygate Firewall. That still did not make a difference this time. However, in the past (synced 3 times) I had no problem connecting my PC to the MDA. Just this last time. So, I believe ActiveSync is sort of flaky. Thanks, if I get it running, I will post.

Strange but true. I hade same problem which started when i accedently plug out cabel while sinc. after reboot all back in normal

Related

Activesync 4.0 and WM5

Been playing with Activesync and WM5 now for over 4 hours.
My findings are the following.
1) I have seem to have lost the partnership and only way to get it back was to flash the device again and create a new one.
2) I have seem to be able to establish a partnership as a Guest.
3) after refalshing I made a new parnership and connected, added my contacts and started to sync, well it started to look for changes and that was it.
4) My device gives network card gives me a Unable to obatin ip error and I have worked with both the Use Secific Ip and server asgined Ip.
So now I get the feeling that you cant sync with WM5 and outlook 2003 configured with a pst file.
Can anybody confirm that they have been able to download there contacts out of outlook (not server based)?
What is the trick for the network card set up on the device and the windows based mobile device network card on the desktop.
PS Yes I have XP SP2
I can confirm that it works. I did nothing special, it almost worked from the beginning. One thing, that it seems Outlook MUST be your default e-mail client when building a new partnership.
Activesync 4.0.0 b4343
Outllok 2003 (11.5608.5656)
Mamaich's patched wm5 rom + fixes
I also have no problems with outlook 2003 and AS4. Firewall or some other program can block the connection.
But I've setuped ActiveSync to sync directly with exchange server.
mamaich said:
I also have no problems with outlook 2003 and AS4. Firewall or some other program can block the connection.
But I've setuped ActiveSync to sync directly with exchange server.
Click to expand...
Click to collapse
Good for u that u have an exchange srvr
Thanks for the feedback.
At this moment in time I will forget the Outlook sync and work on the connection to the device.
1) When I installed AS4 and attached my 1.40 device I was able to browse the device (and hence load the partion application).
2) When I upgraded to WM5 I have been unable to connect and if I can I can only get a conection as guest.
What do I see.
1) On connection for cradel a new network card is installed on my desktop, its is the "windows moble device" , configured to auto and since it finds no DHCP isntall an APIPA address and acts as a DHCP
2) On whatching the device in the network connections "Remote-Ndis-Host" Set to Auto I see under the IP address a mac address and then a APIA address which seems to be the same as the DHCP on the Desktop.
(Cant remember when I saw it).
So the device sometimes shows me connected (seen by the arrows at the top) sometimes comes up with Can't get an address. However the desktop AS4 is still connecting.
Seems that I have a conflict in the AIPA which should not be the case as that is not what it was built for.
I will try fix IP on both sides and bridging the netsworks, also turn off the firewall.
Find it hard to belive that I could see the device with AS4 and rom 1.40 and now cant with WM5.
Oh sorry, I actually forgot to turn off the fire wall. Everything is ok after I did that....
WM5 and AS4.0 are working seamlessly.......
I Had the same problem, after installing WM5 on both my XDA & XDAiis my ohone wouldnt connect to my desktop. I have AS4 installed on my notebook and that works fine. (it looks like the proble happens only on the PC used for installing WM).
I suggest removing AS4 and re-installing it.
Good luck
Well I will be dammed.
I turned off my firewall PC-cillin Internet Security 2005 on the computer that installed the rom and bingo.
So the firewall worked ok with the AS4 and 1.40 but not after upgrade WM5. Must be something new in the WM5 rom. The device says its connected the desktop only says its trying to connect.
Here are a few more things that I tried
Installed AS4 on my multi boot Laptop XPSp2 Partiion, had Windows firewall enabled all default settings, saw device and paired (did not have office so could only explorer device). And it worked
On Laptop XPSp2 partition were I installed WM5 and was able to connect to device with AS4 and rom 1.40 before the upgrade: I gave Device a fix Ip and Wireless Network connection on Laptop a fixed IP in a different network. Could ping both from PC but not connect with AS4. Tried to bridge the two networks (not that it was need) but did not help. Tried the same segement with fixed IP and still no luck.
Reinstalled AS4 many a time, reflashed it also many a time and still could not connect.
Well that was Fun... NOT
Hi @ all, when I'm trying to install AS4 on my Computer, I get the following error:
"Setup not complete. The wizard was interrupted before Microsoft ActiveSync 4.0 could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again. Click Finish to exit the wizard."
I've tryed it on my computer and on my mobile computer. Both have a legal Windows XP with SP2 and all current updates from WindowsUpdate.
I can't find a conclusion, maybe someone can help me
Hi,
same problems as MDAIIIUser here.
I tried AS 4.0 on 2 different Notebooks and 1 Desktop PC. No problems with WM2003. Best result I was able to get was on a Notebook with XP Pro SP2. I could explore the device but no syncing anything.
The other 2 PS´s weren´t able to connect at all.
Any ideas ?
Greetz from Germany
TOM
Well my problem is that my active sync takes ages to sync the contact and calender. Well i do have 900+ contacts but with WM2003SE that used to take a couple of minutes. Can someone enlighten on this.
Thanks.
Hemant.
The answer is that unfortunately the Persistent Storage (Flash Memory) although a benefit in so much as it will stop you from losing all your data in the event of a battery drain is also 10x slower than RAM. This is where the database resides for Pocket Outlook and you will see the speed difference when doing large file operations such as this.
Don't panic too much as after the first sync it will probably not make a great difference to normal syncs which will only update a few items each time.
There are some great links for stuff on Persistent Storage over at buzz's site ->Here<-
Bebbo,
Thanks for ur reply. The thing is that even my first sync hasnt finished yet and it takes a lot of hours to sync each one. Anyway i am trying to finish this weekend.
Thanks.
Is there a possibility that as4 cannot sync contacts with outlook2002?
Because I just can sync files and media. Most important things like contacts,
calender, task etc. don't work. Am I the only one with this problem?
Same problem as told by MDAIIIuser
Dear MDA-IIIuser I am facing same problems as you have written in your letter.
I Tried to give IP address manually it did not work.
Desperately, I tried to reinstall Active Sync 3.8; it did not detect my PPC.
I was able to synchronize my contacts....every time when I hard reset but after that nothing,,,,,,,,
although the Icon of LAN card showing incoming and outgoing data it remains in the phase of "connecting".
I tried to bridge to LAN card, it did not work.
If you will get any solution please let us know..
Thanks..
Well I amanaged to sysnc my contacts and my problem was my own firewall PC-Cllin 2005 which I needed to turn off.
Fire wall??
I am using Zone Alarm Pro, I was thinking on this line....I turned of (I turned off the windows fire wall also)...but problem remain same
shall I uninstall Zone alarm and see the responses??????????? :? :?
Well I checked my device with AS4 XP2 with Firewall (its default) and I could see my device, I did not sync as I had no office on it.
I was able to see the device with AS4 and Rom 1.40 so some thing is different with WM5.
Anything to do with ports must be off, also make sure you are connected direct.
Try it for what its worth!
I am also having this problem. I have assigned my PPC to obtain a server assigned IP address since i am syncing with two device. Every time it syncs it gives me an error that the server couldnt assign IP. Any luck on that.
Also all those people having problems where your computer is not syncing outlook entries, here i what you can try to do. Open your Outlook 2003 and then click tools and then click detect and repair. Once it is finished you will see that it can sync your outlook entries now. I hope this helps.
This is because your outlook 2003 has to be the default mail client or it wont sync your entries. Again of the dirty tricks of M$. :roll:
Hi Guys,
I have a rather odd problem. I am using a WinXP SP1 laptop along with Norton Internet Secruity 2005.
I just purchased a jasjar and installed the activesync 4.0 program that came on the CD. When i begin to synchronise, i get the following message:
"You will only be able to sychronise files, folder and other non-Outlook items right now. If you want to synchronise email, calendar, notes, tasks, contacts, please disconnect the device, install and run Outlook and then synchronise again". Well the funny thing is outlook is already running and used to work fine with my PDA2k.
Outlook is my default client for all of the above. I even tried disabling the firewall, still no luck. Can you guys help me out here, its really bugging the hell outta me.
Appreciate any input.
Best Regards,
UD.

activesync 4.1 problems

I have a siemens sx66 .When i had 2003 on my phone activesync 4.1 was great. Now that i have wm5 it is so hard to geat them to connect. It will not sync anything. When i have my phone in the cradle activesync on my computer says not connected and the phone says connected. Is there a patch or fix for this problem? Thanks LuXx
Finally got it to work. I had to turn off my zone alarm fire wall when i made the first connection. Now i can turn on the zone alarm and install programs and copy files to and from ppc. If i need to sync contacts then i have to turn off my fire wall. I've tried messing with the settings in zone alarm but nothing i do works on syncing with my fire wall on. Hope this can help someone.Thanx
I have the same problem. But I have no firewall installen on my PC. My XP SP2 firewall is disabled.
I have tried uninstalling, and installing Active Sync 4.1 but still the same. No syncing occurs, ActiveSync says not connected while mye Blueangel says connected.
Strange thing is, that if I connect over IR I can sync my phone. Just not with USB. I have both a cradle and a loose cable and none of them work.
Beside the firewall, check your network interface. ActiveSync 4.x will create a virtual network interface when a WM5 device is connected via USB. Check all the items (Client for Microsoft Networks, File and Printing Sharing..., and TCP/IP) of the virtual NIC.
Michael
Did you look in Wiki..?
Hi All,
After all the common problems that you describe did any of you look in Wiki..?
Here's what's pasted about WM5 and Active Sync:
Wiki said:
Desktop and Acivesync 4.X
I can't sync my WM5 device now that I have upgraded.
This seems to be the case with some users and not with others.
One user reports that it works on his laptop but not on his desktop.
Firewalls are a known problem (PC-Cillin 12).
Otherwise you need to search the forums.
It seems that in some configurations Activesync does not sync some data with your Desktop PC.
Data that could be affected
Contacts
Calendar
E-mail
Tasks
Files, Notes and Favorites can sync OK. ?AvantGO Connect could sync OK. In such case check you have an Exchange connection on your desktop Outlook application. If that's the case, you should sync your device having a live Exchange connection first. After that, you should synchronize "offline" (i.e. without Exchange connection) without problems.
Click to expand...
Click to collapse
Alternatively, this might give you the answers..
http://forum.xda-developers.com/viewtopic.php?p=155586#155586
Otherwise, look at the Link in my Signature..
Cheers,
I don't know everyones situation. But I have Mcafee Personal Firewall.
I have sx66 and have upgraded to WM5 and having no problems as of yet. However I could no sync at all. I found this if anyone has problems syncing.
http://www.microsoft.com/windowsmobile/help/activesync/mcafee.mspx
The problem I have now is when I connect to activesync I loose my internet connection on the laptop. Anyone have any ideas?
Also anyone know where to get some boot screens?
xZAOx said:
I have sx66 and have upgraded to WM5 and having no problems as of yet. However I could no sync at all.
Click to expand...
Click to collapse
OK, that means you HAVE problems, after all... :roll:
xZAOx said:
The problem I have now is when I connect to activesync I loose my internet connection on the laptop. Anyone have any ideas?
Click to expand...
Click to collapse
I'm having the same problem. But with wireless..... ANY IDEAS??

My computer dont detect my HTC TyTn II

After a hard reset on the TyTn my computer is no longer detecting it when I connect the phone to USB cable. The computer makes a sound when I connect it, but Windows Mobile Device Centrer say that TyTn II is not connected, and it does not show up in My Computer eather.
I've tryed to delete the partnership and reconnect the phone, but nothing happens.
Can anyone help me please! Now I cant install any of my programs og transfer files between the computer and the pocket pc/phone.
Try this:
tap Start > Settings > Connections.
tap USB to computer.
Uncheck the Enable advanced network functionality box
Try this:
tap Start > Settings > Connections.
tap USB to computer.
Uncheck the Enable advanced network functionality box
I uninstalled Windows Mobile Device Centrer and then tryed the tip you described here. At first it looked ok, my computer detected the device and installed the drivers and reinstalled Windows Mobile Device Centrer.
But my device is still not showing up in Windows Mobile Device Centrer or My Computer
Check your personal firewall settings and open the ports MS asks you to at the Windows Mobile home/support page...
Go into task manager & see if Activesync is running. I have the same problem with my tilt & if I kill activesync then reattach it takes a moment the first time, but then it works.
Make sure you are running the latest version of WMDC. I absolutely could not get WMDC to work with my HTC Wizard for months. After MS came out with an updated version of WMDC (around June, I think) it started working fine.
If you absolutely can't get it to work, consider using emoze for over the air syncing of cal, contacts, mail, etc. (or an on-line exchange account.) I had to do that for a few months until I got it to work. Emoze has the advantage of being free. Unfortunately, neither will allow file syncronization, tho.
There is no activesync running.
And everything was working just fine before my device went "mental" and I had to hard reset. So before the hard reset I could use WMDC on this computer, transfer files and run active sync. But now I cant.
I also got an online exchange account so I can sync calender and contacts. But I want to be albe to transfer files to my computer and install new software.
My WMDC version is: 6.1.6965
Some more info about the computer may help. For instance, I take it from your usage fo Windows Mobile Device Center that you are running Vista. In any case, since the problem is with the computer and not the Kaiser, I would see if the manufacturer would provide some support.
Yes, im running Vista and I buildt the PC my self.
But Im not sure its realy the PC that is the problem, because I made the changes (Hard Reset) to the device and thats what caused the problem.
Anyway, I was hoping for some way to debug/troubleshoot this problem.
I am having the same problem. I sync to any one of 8 computers at work and one at home. Work runs XP PRO and Home VISTA Ultimate x64 all worked fine untill this week. I have not made any changes since the last sync, the computers know it's hooked up due to activesync opening and trying to connect when I plug in via USB. But it never connects. I want to flash to Dutty's newest ROM but can't connect. I sync all contacts and e-mail wirelessly but need the computer to flash (I do not have a sd card yet) Any idead would be great! I have tried the ideas listed above but no joy. I have not hard reset the device as of yet ( I need some things off of it first)
Steve
BUMP
I really need help with this!!! I'm pulling my hair out!
Did any of you that had this problem find a solution? I have the exact same issue except a hard reset will fix it for a while, and then the problem will reoccur a few months later. No software has been added during the time frame. Very annoying.
i've got just the same problem! plaese help us!
i'm not able to install wmdc. it says it is for vista only. i'm currently on winxp. tried to install it via the disc provided..
lipanz said:
i'm not able to install wmdc. it says it is for vista only. i'm currently on winxp. tried to install it via the disc provided..
Click to expand...
Click to collapse
omg!
try activesync for XP. It came with the phone or you can download it from.
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx

Cannot ActiveSync using my Kaiser (Solution Found)

Hi, I thought I will give you my experience, my device have been active sync for more than a month, suddenly it refused to sync any more, I've checked every\thing on my notebook, redownloaded the Activesyn, repaired no way, I've just surfed the net and found the cure for that bur I still wonder how did it happen suddenly, most of you knows that there are two ways of sync's either RNDIS Syn Mode or USB Serial Sync Mode, I found this usefull utility by MS to solve this problem just download to your pda, reset your device and open the application and choose USB mode Viola !!!
http://www.utstar.com/pcd/downloads/AS-Cab.mode.doc.doc.
Happy Syncing !!!
http://www.utstar.com/pcd/downloads/AS-Cab.mode.doc.doc.
I also had to use this solution when I got my TILT last year.
No matter what I did my TILT would not successfully connect to any of my PC's with ActiveSync. After changing the mode to "USB Serial Sync Mode" everything worked fine.
However ... a friend recently gave me a BlackJackII to play with, and again I could not get the device to connect at all via USB + Activesync. I plugged the phone into his computer and waaa laaa! Activesync worked perfectly.
Not sure why I have so much trouble connecting to devices via RNDIS. I've gone through all the troubleshooting ... firewall, antivirus, blah blah blah...
No luck. Is a cab with similar functionality for WM Standard? or if it just changes something in the Registry ... what is the Key?
Proto732 said:
I also had to use this solution when I got my TILT last year.
No matter what I did my TILT would not successfully connect to any of my PC's with ActiveSync. After changing the mode to "USB Serial Sync Mode" everything worked fine.
However ... a friend recently gave me a BlackJackII to play with, and again I could not get the device to connect at all via USB + Activesync. I plugged the phone into his computer and waaa laaa! Activesync worked perfectly.
Not sure why I have so much trouble connecting to devices via RNDIS. I've gone through all the troubleshooting ... firewall, antivirus, blah blah blah...
No luck. Is a cab with similar functionality for WM Standard? or if it just changes something in the Registry ... what is the Key?
Click to expand...
Click to collapse
Actually this can be used for all WM but you have to use the latest ActiveSyn from MS (V 4.5), this is the utility which can overcome this no need of a cab or so.
Actually all my machines do have ActiveSync 4.5 build 5096,
and of course I tried to install the cab on the BlackJackII before I even posted ... but I get the message
"Installation of ActiveSyncMode.sa.cab was unsuccessfull. The installation file is not intended for this device."
Click to expand...
Click to collapse
So it doesn't work for WM Standard ... at least on a BlackJackII
anyone know how to setup windows firewall to sync with my tilt with vista?
GuySparkz said:
anyone know how to setup windows firewall to sync with my tilt with vista?
Click to expand...
Click to collapse
Anyone who uses "vista firewall" in the forum search soon will.

T-Mobile MDA Vario III won't sync

Recently I'm unable to sync my Vario III with my Vista x64 or Windows XP Pro desktop PC's. I don't sync often - last time was in March which worked fine.
At first I thought the problem was with WMDC on my Vista PC. I uninstalled WMDC re-installed, but it's made no difference.
The symptoms i'm getting are that when I start WMDC with the phone connected sing USB, I get the splash screen, then it sticks and goes no further. WMDC will start only if the phone is not connected.
If I plug it into the XP Pro PC, Activesync 4.5 starts, the animated ball spins in Activesync, but doesn't complete.
I think the problem is with the phone rather than either WMDC or Activesync, as I can start Pocket Controller on Vista and see the phone, and I can connect to the phone using Co-Pilot Central to download speed camera updates.
The last thing I did was to the phone was install Google apps like Youtube mobile and Search. Can these interfere with Activesync and WMDC? I've removed them but it still won't connect.
I've tried changing the USB connection type from advanced to normal, but that didn't fix it.
I get the usual windows sounds upon connection and disconnection, but WMDC doesn't work.
One clue here. If I set a password to protect the phone, upon connection, the phone locks and the PC says to unlock the phone. I type the password on the phone to unlock it, but the PC sits there with the same message to unlock the phone. So WMDC sees the phone up to a point.
I've also removed the partnerships from both the phone and the PC's, but neither WMDC or Activesync detect the phone as a new device. Activesync on the phone shows no errors.
I've tried everything I can think of and am still convinced it's a phone problem. I've searched for similar problems on XDA but haven't found anything similar.
Sorry for the long post!
Any ideas?
Thanks
Mike
Tried another cable?
ChumleyEX said:
Tried another cable?
Click to expand...
Click to collapse
Yes. Made no difference. Didn't see how it could really - since apps like Pocket Controller and CoPilot Central can see the phone.
I've had many activesync/WMDC problems over the years but never one quite like this. It wouldn't be so bad if it gave an error message or something, but it doesn't. There's nothing related in the event log either.
Baffled!
mtcs said:
..... There's nothing related in the event log either.
Baffled!
Click to expand...
Click to collapse
Woops. How did I miss it. There is something in the event log.
'Windows Mobile-based device failed to connect due to communication (0x80072745) failure (see data for failure code).'
I tried looking up the code using the Event Log Online Help but it has '...no additional information at this time'.
Oh well. At least I've got something to Google.
I figured it out. It was the device - the MDA Vario III.
My girlfriends phone - Palm Treo Pro - connects ok to the Vista PC on her account. WMDC worked fine with it. I plugged in my Vario III whilst still logged into her account, and WMDC wouldn't work.
I tried it on my account one more time, still wouldn't work. Reset the phone to factory defaults, re-configured it, connected it to the Vista PC, and WMDC worked fine.
I have no idea why it wouldn't work right before. In all other respects the phone was fine.

Categories

Resources