I'm new to PDA Phones, so this may not be Tilt/Kaiser related.
When I send text messages (by going to the contact list, tapping the person's name, and then tapping "send text message") to anyone, they get it without any problems. But when I go to them in the "sent" text messages folder, EVERY text message displays my brother's contact right below after the "To:" (with the correct contact) and "date:" (with the correct info). It shows my brother's contact as if he was the sender.
Why would this be. What can I do?
javisan23 said:
I'm new to PDA Phones, so this may not be Tilt/Kaiser related.
When I send text messages (by going to the contact list, tapping the person's name, and then tapping "send text message") to anyone, they get it without any problems. But when I go to them in the "sent" text messages folder, EVERY text message displays my brother's contact right below after the "To:" (with the correct contact) and "date:" (with the correct info). It shows my brother's contact as if he was the sender.
Why would this be. What can I do?
Click to expand...
Click to collapse
Have you got your own number listed as brother in your contacts?
Wiggy
maybe you have his old phone number or something...
edit: and you still have it in your contact list
Got it,
Thank you very much guys. How dumb of me!
I listed my number in my brother's contact (the difference between his number and mine is 1 number).
Thanks again.
As an SMS arrives, a link between the phonenumber who sent the message and a contact(name) is made.
Why does WM6 look at first in the list of the SIM contacts,
and if none SIM contact has the senders phonenumber,
it looks in the 'outlook' contactlist?
I'm not really interested in the why, rather to be able to change the list which primarely must be checked.
Eventualy.. deleting all the SIM contact is a solution, but I'd rather don't wanne do that.
WM6 looks at first in the 'outlook' contacts.
The problem was that the phonenumber in de 'outlook' contacts had a wrong prefix.. that's why it showed the SIM's (abbreviated) contact name.
This thread may be closed..
I hope that I am missing something very obvious ...
I have a Caller Id Problem with my HTC Diamond… And it’s very annoying.
Diamond has two sources for storing contacts.
SIM card and WM Contact list…
---- Default scenario.
/ Caller ID rule: 8 trailing digits for Call ID match
/ Show Sim Contacts: Yes (Note: If you hide the SIM card contacts via registry change the problem remains the same)
----Problem:
/ If the caller information is not stored on the SIM card, you will always have "Unknown caller ID", despite the fact that his info is stored on the device contact list.
So far I couldn’t solve this with the default settings.
Workaround? Its obvious…
You must have all the important numbers stored on the Sim card.
---- My Scenario.
I always used MS Outlook ( now ver 2003 ) as a default contact list.
In my Outlook contact list I have approximately 300 contacts stored with 500 tel. numbers and all the main tables used. (Firs, Last, Company, mob, home, email etc … )
Those contacts were always my default contacts and I never had any problems to use them or sync them with my PPC or any mobile device before.
SIM card contact list is just was always just a “backup contact list” for me.
I did hide the SIM card contacts via reg. change on my diamond because not doing that will result with doubling my contacts and a total mess ( Sim + Outlook ).
Now I can see and dial only from my device (Outlook) contact list and that problem was solved very fast.
The problem remains with the caller ID.
How do I make the Diamond to lookup up for the numbers stored on the device contact list (Outlook list) and ignore the SIM card contacts?
Thanks,
K
I don't have this issue... however the default number of trailing digits to identify an incomming call is 8
Reduce the number of digits with the advanced config tool by schap
I did that tweak first without any positive results for this problem...
Do you have full numbers (country + area code+ 0044123456789 ) in your contact list or just the mob. number.
Anyway, the info that is shown is from your contact list or the SIM card?
Reg,
K
KraFT_mk said:
I did that tweak first without any positive results for this problem...
Do you have full numbers (country + area code+ 0044123456789 ) in your contact list or just the mob. number.
Anyway, the info that is shown is from your contact list or the SIM card?
Reg,
K
Click to expand...
Click to collapse
10 digit calling in my area (no country codes) but I set the Call ID trailing digits to 6.
The likely hood of getting this repeat on two numbers is pretty slim.
This problem is driving me nuts!
TEST Scenario.
Test to check if you have the same problem:
You must have a second active mobile phone near you. (John Smith).
Example:
Store the contact (John Smith) from your second mobile on your HTC Diamond SIM CARD and on your Diamond contact list with full numbers. (Country + area etc)
a* John Smith @ your SIM CARD 0044123456789
b* Smith, John (Company name) @ Your contact list: 0044123456789
1. Dial from your second mobile device to your HTC Diamond and see if the phone call is identified as John Smith. (It should be ok...)
2. Now delete a* from your SIM CARD on your HTC Diamond.
Now, dial from your second mobile device to your HTC Diamond device and see if you have “Unknown number – 0044123456789 “. If not, than your device is OK …..
If yes, than you have the same problem …
****************
PS. My Caller ID rule: 6 trailing digits for Call ID match
I don't seem to have this issue... maybe your looking at a hard reset or a defective device... however it is possible that others are having the same issue as you... anyone?
Finally, I gave up and I did my first hardware reset and restored everything to factory settings.
Immediately after that I changed only the reg. Caller ID rule: from 8 to 7 trailing digits for Call ID match.
HKCU\Control Panel\Phone\CalIidMatch value:7
Then I did a perfect contact Sync via MS Active Synch with my outlook 2003.
AGAIN, I STILL HAVE THE SAME PROBLEM.
At the moment there are absolutely no numbers stored on my SIM card. It’s totally empty.
All my tel numbers in my Outlook contact list are stored completely:
Example:
Smith, John
Mobile tel: 0038970123456
When John Smith dials, I get this “Unknown Caller" 070123456 !
I am getting desperate here and I hate this stupid problem....
Anyone has any ideas?
I do need your help!
Thanks!
KraFT
Is there any way to get the caller number displayed or transmitted as complete code (inluding country+area+local number)...? Maybe this can fix the problem.
UPDATE:
The problem is finally SOLVED... (And probably it's a Full Moon out tonite .... )
After 3 billon visited pages and one billion number combinations, I tried and replaced the first two digits (exit code) "00" with " + " in every tel number on my contact list.
That solved all my problems …
Go and figure what’s the difference and how using the actual exit code instead of a " + " symbol is messing up the caller ID function.
Ah ... What a day...
KraFT
BTW, the Diamond is great so far...
... first I wanted to write that this might be the issue... but then I thought that I wrote it worked before... so I thought I stick with the missing incoming call information first ...
Concrats! Glad you resolved it
Hi!
I have a similar problem. Whenever I dont use country codes, caller id works well showing names but the sms messages dont show any names (only numbers). In reverse, whenever I use country codes with the + sign, names of callers dont show but the sms messages show the names. It seems that I have to choose between calls and sms
Anyone could help?
It didnt work for me, i tried both with 00 and +,,
BestAlways said:
Hi!
I have a similar problem. Whenever I dont use country codes, caller id works well showing names but the sms messages dont show any names (only numbers). In reverse, whenever I use country codes with the + sign, names of callers dont show but the sms messages show the names. It seems that I have to choose between calls and sms
Anyone could help?
Click to expand...
Click to collapse
Has anyone managed to go around this problem? I'm having the similar problem of SMS messages not showing properly if I don't use the "+ area code" with my contacts.
SMS and Caller ID
How can this be such a huge issue when every bog-standard mobile can sort out caller and SMS ID? Is it a problem with Windows Mobile or HTC? I have spent hours trying to sort this on my Diamond 2. I have 5000 contacts and only want the phone to ring for a handful therefore I need caller ID to work AND know who is texting me. I have tried all the various telephone formats and CALLERID reg settings with no consistent results. At the moment I use the long format +353121234567 as the mobile number which - sometimes- ID's texts and the short local format of the number as "assistants" number which allows Caller ID.
BUt I have one important favourite which refuses to ID SMS although if I click on the contact it recognises and names all the SMS's in the thread.
This is absolutely doing my head in and is such a waste of time.
Do all windows mobile or HTC users have to put up with the same?
SOLVED problem with CALLER ID !!!
I have Diamond 2 and synchonized with outlook and it doesn't matter whether country code is present or not, still I had the problem. After all I accidentaly removed all contacts from Diamond 2, BUT I've had a backup from PPCPimBackup (known small utility) a I restored all the contacts (delete and renew all contacts from backup option) and voila, now the CALLED ID is correct! It's now working!
Pls try it...
Hi all!
I was wondering if there is a way to force the SMS application to requery the Number->Contact relationship.
I have a number of text messages which only show the phone number but not the contact name even though there is such a contact in my address book.
I tried doing it by deleting all texts and restoring a backup from PIM backup but no luck...
Many Thanks!
alt236
In WM6.1, mine get fixed if I receive a new text from an updated contact. I still have some with Last, First because I haven't received anything from them.
Thanks
I just upgraded to 6.1, so lets see what happens!
I just received a text from one of the "problematic" contacts, but no luck.
The new text does show his name, but none of the older ones got updated...
Edit: The annoying thing is that the problem exists only in the lists view. If I open the text, the contact details show up fine...
Hi,
I got an MMS earlier from a friend whose number is in my phones contact list (phone memory - not SIM). The message displayed his number, not his name - despite him being in my contacts. This is annoying as I couldnt work out who it was from until I called the sender and his name flashed up at that point.
After searching google and XDA dev I can find many references to this exact issue, but no solutions
Anyone got any ideas??
Zippyioa
I'm having the same problem. Always had it with all 6.1 ROMs. Or at least that's when I started noticing it. I just flashed the ATT rom so I'll see if I still get the same problem. I had it with Laurentius and HTC roms.
Yep, I have it too.
I just got an SMS and it displayed the senders name on the notification bubble.
When I closed the bubble and went to view it in Messaging the message showing in Inbox was also showing the senders name - the MMS messages above still only had senders numbers (even though one of the MMS senders had their name showing on an SMS below).
It looks like MMS messages are the cause somehow!?
zippyioa
http://social.microsoft.com/Forums/.../thread/747a9ca3-e27b-4b43-bef1-c1cf532ad692/
this may help