Related
Site:
-------------
http://www.windowsmobile.no/modules.php?name=News&file=article&sid=161
BA_DT_WWE_NorwayRetail_14000_149_11200_Ship ROM:
http://www.windowsmobile.no/modules.php?name=Downloads&d_op=getit&lid=78
Thanks, I have uploaded the ROM to FTP:
ftp://xda:[email protected]/Bl...s/BA_DT_WWE_NorwayRetail_14000_149_11200_Ship
Enjoy!
OK, I'm sure I'm just an idiot, but I followed the instructions in the "Getting started" section, since I have the Brightpoint version of the Qtek, not the Dangaard. But I couldn't get it to work, probably because I haven't got the correct password in the editfix.bat. Can anybody help me with that?
See this thread mate...: http://forum.xda-developers.com/viewtopic.php?t=20770
Or read this thread, which will explain it also: http://forum.xda-developers.com/viewtopic.php?t=20339
And uh, have you read wiki?
See my signature for link.
Hope that helps
Yes, I did read the Wiki. Didn't understand much of it, but I did read it...
And thanks for that thread, adding the line [CHECKCEID_TYPE]=1 made it start updating!With any luck it will work. But then again with my luck... :roll: :wink:
Change the boot picture
Hello,
Updated my Qtek9090 to this version but the only complain i have is that the boot picture after a reset is UGLY. :x
They put a text in the image
www-windowsmobile-no + Qtek support number.
Is there a way to change the picture ??
I could not find anything about this ?
Does anybody have the QTEK cloud picture without the text.
Could you upload this to the FTP ?
Thx for your time
I wasn't that lucky... It just was stuck on "getting device info". Now I've got a unit that switches between showing a grey screen with USB and a grey screen with SERIAL... The annoying thing is that I remember I had that problem on one of the official upgrades, but I can't remember what I did. I probably just left it without a battery over night, though. Oh, and when I tried to restart that upgrade I saw the country ID error again. So perhaps just adding that line to the cfg wasn't what you were trying to divert my attention to in that other thread. Or was it?
Restart your computer and try the upgrade again...usually works.
And no, that was not a diversion, why should we? :shock:
I should stop using long words with serveral meanings when I don't know all the meanings myself... I ment divert in the sense that you divert traffic - showing me the way to that other thread.
ER2003Edit
Could somebody upload ER2003Edit to the blueangel >> Tool folder.
I found away to change the splashscreen :lol: but you need the ER2003Edit software to edit the *.nbf files
Thank you !!
WoooHooo almost there
>> Doesn't work for the QTEK9090 --> Again The quest begins <<
when a new for imate ?¿?
regards
Gotcha. I'm going with the one on the forum's FTP. I assume that's the same one as the official one I downloaded from the windowsmobile.no site. Maybe I can get my at the moment rather expensive paper weight back from "USB SERIAL"...
I often get the USB/SERIAL problem. Best thing to do is just kill activesync via task manager. I think wcescomm.exe is the one. Then just re-run the upgrade. Should run through, but it won't have anything in the screen that tells the to and from version info for the 'from' info.
Cheers
RTP
Aaargh! To quote a certain young mr. Brown with a rather round head and a wacky dog: "Good grief!" I thought I was rather computer litterate having spent the last 20 years around them, but any old dog can learn new tricks, it seems...
Finally the upgrade of the main rom went nicely, and also the extended ROM, it was very much a by the numbers job as soon as I understood where to look. Kitchen? Man, I know we've got something called that in my house... Oh yes, that's the mysteriuos room where my wife goes into half an hour to one hour before dinner and then emerges again with the food! :roll: :wink:
Finally the radio ROM, and I'm good, I hope. It will be interesting to test this stuff and see how it works! Thanks for the help! I feel like a dangerous hacker now, so look out, Norway!
Re: New official ROM 1.40 from Dangaard
can somebody explain me where I can download rom 1.11?
Mastiff said:
Aaargh! To quote a certain young mr. Brown with a rather round head and a wacky dog: "Good grief!" I thought I was rather computer litterate having spent the last 20 years around them, but any old dog can learn new tricks, it seems...
Finally the upgrade of the main rom went nicely, and also the extended ROM, it was very much a by the numbers job as soon as I understood where to look. Kitchen? Man, I know we've got something called that in my house... Oh yes, that's the mysteriuos room where my wife goes into half an hour to one hour before dinner and then emerges again with the food! :roll: :wink:
Finally the radio ROM, and I'm good, I hope. It will be interesting to test this stuff and see how it works! Thanks for the help! I feel like a dangerous hacker now, so look out, Norway!
Click to expand...
Click to collapse
Congratulations mate for that
May you please upload the extended rom files to the forum's FTP ?!
Thanks in advanced mate and best of luck and wishes everybody
Best Regards,
Thanks! The files are already there. Look at the thread that I'm refered to after my first message: ftp://xda:[email protected]/Uploads/Blueangel/BA_WWE_14000_147_11200_Ship_EXT_ROM_1.40.147
any one able to extract the extended rom pls post it on the ftp.
thanks
jeet
Re: ER2003Edit
Captkiwi said:
Could somebody upload ER2003Edit to the blueangel >> Tool folder.
I found away to change the splashscreen :lol: but you need the ER2003Edit software to edit the *.nbf files
Thank you !!
WoooHooo almost there
>> Doesn't work for the QTEK9090 --> Again The quest begins <<
Click to expand...
Click to collapse
The tool can be downloaded here:
ftp://xda:[email protected]/Tools/ER2003Edit_1_4_26.zip
Good luck, coz I think the tool will not work on BA ROMs...
No camera
Hi everybody,
I like the new 1.40 rom but even after trying some camera fixes off the wiki, My camera stills ("failed to initialize"). Any tips from anyone would be great!! :lol:
Ok, I've spent the entire day sifting through thread after thread of posts, and I am now throughly frustrated . Can someone put together the definitive authority of upgrading all of the various components of the Wizard? I find threads about ROMS, and Extended Roms, and Unlocking, but nothing in one place and very few actual files. I know it may be excessive, but when I upgraded my Wallaby to WM2003SE, it seemed so simple. With $600 invested in my new QTEK 9100 (and no provider to send it back to in case it locks up completely), I'd like a little hand holding through the process.
If someone could spend the time (which I would even contribute to financially) to explain, step by step, how to do the following in one topic, I would be in Wizard heaven: :lol:
Take a Qtek 9100, ROM Version 1.1.7.5, ROM Date: 9/22/05, Radio Version 01.01.10, Protocol Version: 4.0.13.16, ExtROM Version: 1.1.7.105 and:
(1) upddate each of those items;
(2) upload/link the necessary files/programs to accomplish this
(3) provide opinions of the various ROMs/ExtROMs; and
(4) list of tweaks and explaination of how to do them, as well as any programs needed to accomplish this.
I really would appreciate this, and speaking for those out there who get as equally lost/frustrated/scared/confused about doing this, I know others would as well.
TIA for anyone willing to take this task on! I hope for a speedy response as I would like to start personalizing this phone but don't want to have to do it again a week from now.
http://www.pocketpctweaks.com/
ftp://ftp.xda-developers.com/Uploads/HTC_Wizard/
and there are the romz
and like every one else you have to try
if at first you dont succeed try try again
on the topic how to update the rom is an abundance of info on this site
dont be lazy find out yourself you will learn more every day
if you think a rom is dificult
try to instal tomtom and get the bluetooth gps mouse to work prop. thats the real challenge
Lists tweaks, but I could not find a "handbook" so to speak at this site. . . I need the meat of it.
trust me, I have not been lazy (my boss would have a cow if they knew how I wasted my day). I can't seem to access the FTP site. Do I need to have any special clearance?
http://gathering.tweakers.net/forum/list_messages/1110642//
the only problem for you i think
ITS IN DUTCH
LOOK FOR THIS TEXT "De verschillende ROMs kun je hier vinden."
AND CLICK ON "hier" there you have the link to the ftp site
manual
Thanks Raylax!!
I also spent more time looking at the thread that has aWizard which was helpful and the FTP finally let me on. Is there a reason to install either the new radio or rom first?
Welp I was fixing to pay Cingular $350 to prematurely cancel our contract b/c I was about ready to throw my POS 8125 out the window. Then someone referred me here and I'm cautiously optimistic that my blood pressure will once again be below 250/150.
But after reading through alllll the threads on alllll the roms...I'm a little more confused now than before.
Simply put, which ROM for my 8125 is:
Fastest?
Most Stable?
The custom AKU 2.2 ( http://forum.xda-developers.com/viewtopic.php?t=51047 ) was recommended to me...but now I've gotten lost...
Thanks.
I saw your thread on hofo. This place is 100x cooler and more helpful.
I've had my phone for less than six weeks and read a ton right before buying the phone. As soon as I bought it, I did all of this and haven't had any problems at all.
Get lokiwiz first. I used v0.2b and it worked fine for me. Be sure to take extra time to read the instructions.
http://forum.xda-developers.com/viewtopic.php?t=33796
Select your ROM and perform the upgrade:
ftp://xda:[email protected]/Wizard/Roms/Cingular/
I selected Cingular_RUU_WIZARD_217_AKU2_WWE_CF2_A2DP-fixed.exe from the directory. This is version 2.17 and I haven't had any problems at all. I've been following discussions on newer ROMs and plan to stay where I am for now. You can run this through Activesync and don't even need to establish a partnership. I did my phone, then 3 others all the same way (my wife's and then two for the neighbors) and didn't have a single problem with any of them. Running from the point at which you open the box and start going, this takes anywhere from 45 minutes to an hour once you do this over and over. I've only done this once per phone but seem to be operating a free upgrade service.
Finally, you'll want to hack the registry.
There are tons of registry hacks here:
http://www.indippc.com/v3/index.php?topic=322.msg2018;topicseen
and here: http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
and here: http://forum.xda-developers.com/viewtopic.php?t=38957
You'll probably want to use Resco explorer and their registry editor. Those are nice because you can try them before buying them and make sure you like them. There are others and I tried Total Commander first, but found the Resco product more effective for importing the .reg files I'd created to help speed up the edits.
Hope this helps!
100Tbps, that's awesome info. Thanks for pointing this out. There are a ton of threads with tons of info scattered through and it's easy to miss something. I remember reading that somebody suggested putting all this info in one thread or post and you seem to have done most of it.
One question, is creating a .reg file for WM5 just as easy as creating it for XP/2K? I would like to put my favorite tweaks in one .reg file and import one file.
Thanks!
Well with such a great reply like that, I'd have to agree that this place is beter than hofo.
Concerning Rosco, do you think that it would be better than SPB Pocket Plus? I only ask b/c I read on hofo that Resco slowed the 8125 down more than SPB....but I've been running SPB and it definately slows down my today screen refresh. Does anyone know anything about this?
Also (I posted this in hofo, but I have yet to get an intelligent reply), how does everyone's video run on their 8125? I'm wondering if something is wrong with mine b/c pretty much everything that I try to play only plays at about 0.5 frame per second but with normal video. For example, navigating to the windows media favorite that comes bundled into the favorites menu while my 8125 is connected via USB to my broadband connection, and then clicking on ANY of the videos (they are either 37kb or 54kb) gives me this problem. It's reallllly annoying as I was hoping to later hook up my 8125 with a slingbox--but if I can't get any videos to play normall...this obviosly won't be feasable. Is this par for the 8125? Or is mine just screwy? And yes, this is after both a fresh factory ROM installation and the new 2.2 beta I just installed. Same problem.
Thanks!
hesh said:
100Tbps, that's awesome info. Thanks for pointing this out. There are a ton of threads with tons of info scattered through and it's easy to miss something. I remember reading that somebody suggested putting all this info in one thread or post and you seem to have done most of it.
One question, is creating a .reg file for WM5 just as easy as creating it for XP/2K? I would like to put my favorite tweaks in one .reg file and import one file.
Thanks!
Click to expand...
Click to collapse
Creating the .reg file is very easy. I used Total Commander on my phone to create the .reg files. When I hacked my wife's phone, I discovered Total Commander didn't recognize the .reg files and that's when I tried Resco's product. Their program registered the .reg files but even better, has an import button. So I placed all my .reg files in one place and one by one went through and imported them. I have just under 20 of them. If I ever get time to figure out how to do this, I'll probably try to condense them into larger .regs or learn how to make a .cab.
Stangs55 said:
Well with such a great reply like that, I'd have to agree that this place is beter than hofo.
Concerning Rosco, do you think that it would be better than SPB Pocket Plus? I only ask b/c I read on hofo that Resco slowed the 8125 down more than SPB....but I've been running SPB and it definately slows down my today screen refresh. Does anyone know anything about this?
Also (I posted this in hofo, but I have yet to get an intelligent reply), how does everyone's video run on their 8125? I'm wondering if something is wrong with mine b/c pretty much everything that I try to play only plays at about 0.5 frame per second but with normal video. For example, navigating to the windows media favorite that comes bundled into the favorites menu while my 8125 is connected via USB to my broadband connection, and then clicking on ANY of the videos (they are either 37kb or 54kb) gives me this problem. It's reallllly annoying as I was hoping to later hook up my 8125 with a slingbox--but if I can't get any videos to play normall...this obviosly won't be feasable. Is this par for the 8125? Or is mine just screwy? And yes, this is after both a fresh factory ROM installation and the new 2.2 beta I just installed. Same problem.
Thanks!
Click to expand...
Click to collapse
I actually don't have the Resco product installed on my phone. When I hacked mine, I used Total Commander for regedits, then used Resco on the three other phones. I actually installed it when I was done, but I'm more than likely going to go back and buy it the next time I need to do this. I haven't tred the SPB product so I can't say.
For videos, this might be a more complex discussion.
If you mean recording videos, there is a thread around here explaining registry hacks to increase the frame rate when recording so it plays back smoother. I thought I had it in my collection but don't see it, but I do recall seeing a discussion about this.
If you mean streaming videos over the net or files placed on the SD card or in memory, it could be one of a few things. You may need to overclock the player to get it to play more effectively (this is 100% a guess), try a different player (I've seen people bow down to TCPMP), or the bitrate may be too much and / or an oversized video. Hopefully others will chime in with their experiences about any of these avenues since I've said a bunch without really offering anything concrete. I believe TCPMP is free so that may be the easiest thing to try.
thanks.
I'm actually talking about streaming any video. It's not a bandwidth problem b/c I've tested it while connected to my home broadband over usb. And it's not the server b/c I can turn right aroung and stream the same crappy qualit 37kbs video on my pc and it plays fine. It just seems like the 8125 should be able to handle this w/o any problems...
Stangs55 said:
Concerning Rosco, do you think that it would be better than SPB Pocket Plus? I only ask b/c I read on hofo that Resco slowed the 8125 down more than SPB....but I've been running SPB and it definately slows down my today screen refresh. Does anyone know anything about this?
Click to expand...
Click to collapse
I use Spb Pocket Plus and I like it a lot. It does slow down the 8125 a bit but I don't think it's any worse than Resco's product, though I don't remember using Resco's. However, SBSH's iLauncher is pretty good. It has a ton of options, much more than Pocket Plus, but Pocket Plus just seems to be a more refined product. You might want to give iLauncher a try.
http://www.sbsh.net/products/ilauncher/
100Tbps said:
I have just under 20 of them. If I ever get time to figure out how to do this, I'll probably try to condense them into larger .regs or learn how to make a .cab.
Click to expand...
Click to collapse
I am soon to be owner of Cingular 8125, so I am reading every thread I can find on how to improve HTC Wizard.
Could you possibly zip all of .reg files and post them in this thread?
Thanks for your help!
raven2000 said:
100Tbps said:
I have just under 20 of them. If I ever get time to figure out how to do this, I'll probably try to condense them into larger .regs or learn how to make a .cab.
Click to expand...
Click to collapse
I am soon to be owner of Cingular 8125, so I am reading every thread I can find on how to improve HTC Wizard.
Could you possibly zip all of .reg files and post them in this thread?
Thanks for your help!
Click to expand...
Click to collapse
I was going to ask the same thing lol
I divided these into things I think anyone would want (the general folder) and things that may just be personal preference (the personal preference folder). For example, some people may use Hotmail and thus not need to remove it from the list of Inbox options - and not everyone uses Microsoft Voice Command and wouldn't want to change their dialer to something not installed - so these are in the personal preference folder.
These are what I extracted from my phone after I edited them manually (using the 2.17 ROM summiter cooked for us) and created the reg file for my own future use in case I re-flashed. I think it's important to mention newer ROMs may not need some of these because they may already be there because Microsoft (or summiter, the grande provolone of ROM cooking) enabled them - or the registry may be different. So my suggestion is manually verify the path is present before importing to make sure you're actually getting what you want.
Thanks for that
I installed the fixed 2.17 and so far so good...except for one rather big problem--the battery meter no longer works. It just tells me that I always have 100% battery life and the icon at the top taskbar now looks filled in with a single line diagonally across the center. How do I fix this? I also should mention that I'm now using Resco Explorer 2005 5.40...so I don't know if the problem is related to the firmware or Resco.
Any advice? Anyone seen this before?
Hey y'all, I'd just thought I'd introduce myself to the Kaiser world seeing as I'm going to be spending a lot of time here. I'm a freshman at Notre Dame, and needed (..wanted) a smart phone to help me organize this mass of everything happening around me. Being the technology geek I am, I looked quite a bit into it and decided that the "Tilt" was far superior to my dad's heralded and suggested iPhone (plus I kinda loathe Apple. So eh. lol) Anyway, I received my Tilt as a gift last night, and realized that it came bloated with AT&T's crap and didn't look like the same home screen I saw on HTC's website. After spending more than a couple of hours here, I was successful in blindly following different instructions I found in at least 3 different threads to flash the Dutty's HTC ROM to my Kaiser, and I absolutely love it. Problem is though, I have no idea what hell is going on here. I don't know what a .RUU even is, and even though a .CAB was easy to figure out, I have no idea where to put them on phone. And before I get lambasted with the mantra of "use the searchbar" venerated by web forum's loyal users, I'd like to point out that if you take a step back, look at all of this info on here, and pretend you don't understand any of it, it's pretty damn hard to decipher this stuff. So if you guys know of any "Pocket PC New Users" guide written by knowledgable ppl on the web, and any XDA-Beginner guides or anything, please point them in my direction. I'm more than happy to read. However, reading 33 forum pages to figure out how to do 8 lines of instructions for one thing is extremely time consuming, cumbersome, and not that helpful. So again, it's nice to meet you all, and maybe y'all could help point me out in the right direction.
---Holy crap, that's a lot of text. Basically, hey y'all, nice to meet you, and do you think you could help out a newb who's able and willing to learn?
use the search bar!!!! hahahaha jk.....just read the wiki
As well as what's already been suggested, take time to read the manual and play around with the ppc. The importance of experiential learning can't be understated when it comes to these things. Unlike with full sized PCs, performing a hard reset to restore the ppc to an out of the box state is easy work.
So quick question. When I'm copying .CAB files or .EXE files onto my kaiser, where do I put them? I'm installing the iPhone app posted by Grumps, and I don't know where I should put it. Should I just make a file tree for every program I put on there under Program Files?
Hi, a .CAB file is just an executable installer. So best place it in the root of your storage card and delete it after installation of the app. During installation you will be asked where to install the app, PPC memory or storage card. Selecting the storage card will of course save memory, but for some reasons some apps don't work from storage card. You will have to try...
fightin4theirish said:
So quick question. When I'm copying .CAB files or .EXE files onto my kaiser, where do I put them? I'm installing the iPhone app posted by Grumps, and I don't know where I should put it. Should I just make a file tree for every program I put on there under Program Files?
Click to expand...
Click to collapse
I normally keep all my .cab files on my storage card so when I hard reset or re-flash I know where they are. Doesn't matter where you put them - I created a directory called (unoriginally) My Cabs. When you touch on them they will install to the necessary directory on the ppc, and can be uninstalled from the settings menu.
The .exe files could be a bit different. Some need to be installed from your pc - they will then install to the ppc next time you connect with activesync, and can be uninstalled in the same way as .cab files. Other .exe files can be stored anywhere on your ppc or storage card and will run each time you select them.
Heya. Let me be an opportunist and troll your thread to introduce myself here, too. hey all, homies n gyals, I'm Creiz, yes, it's my real name, pleased to meet y'all.
As for your quick question, If you use windows XP with dotNet framework 2, you can use this niifty utility called CabViaAciveSync to directly install your .cab files from the PC.
Right click the .cab => CabViaActiveSync.
Magic.
;P i´m noob too if you dont mine i'll use this thread to intruduce me too hehe and make a question. if i put a new rom my guarantee expires? and is good to change the default rom? what do you "kaiserians" think is the best rom for kaiser and how it works, if i make hard-reset the default rom appears? sorry but im really a noob in pocket things...
well i'm ricardo o/
fightin4theirish said:
Hey y'all, I'd just thought I'd introduce myself to the Kaiser world seeing as I'm going to be spending a lot of time here. I'm a freshman at Notre Dame, and needed (..wanted) a smart phone to help me organize this mass of everything happening around me. Being the technology geek I am, I looked quite a bit into it and decided that the "Tilt" was far superior to my dad's heralded and suggested iPhone (plus I kinda loathe Apple. So eh. lol) Anyway, I received my Tilt as a gift last night, and realized that it came bloated with AT&T's crap and didn't look like the same home screen I saw on HTC's website. After spending more than a couple of hours here, I was successful in blindly following different instructions I found in at least 3 different threads to flash the Dutty's HTC ROM to my Kaiser, and I absolutely love it. Problem is though, I have no idea what hell is going on here. I don't know what a .RUU even is, and even though a .CAB was easy to figure out, I have no idea where to put them on phone. And before I get lambasted with the mantra of "use the searchbar" venerated by web forum's loyal users, I'd like to point out that if you take a step back, look at all of this info on here, and pretend you don't understand any of it, it's pretty damn hard to decipher this stuff. So if you guys know of any "Pocket PC New Users" guide written by knowledgable ppl on the web, and any XDA-Beginner guides or anything, please point them in my direction. I'm more than happy to read. However, reading 33 forum pages to figure out how to do 8 lines of instructions for one thing is extremely time consuming, cumbersome, and not that helpful. So again, it's nice to meet you all, and maybe y'all could help point me out in the right direction.
---Holy crap, that's a lot of text. Basically, hey y'all, nice to meet you, and do you think you could help out a newb who's able and willing to learn?
Click to expand...
Click to collapse
Hi:
I am really a newbie too, only had the Tilt for 2 weeks now. But, I have read hundreds of threads here already, so I'm learning. My suggestion to you is, be sure to install Kaiser Tweaks, it is a great app, which will make it very easy to perform certain registry edits on your phone. The most important of which being, it enables you, with one click to enable hsdpa (faster than 3G internet). For some insane reason AT&T has this disabled on the Tilt. Although, maybe with your new ROM on there you may not need it. I am still using the AT&T ROM, so I'm not sure which features are or aren't on Dutty's ROM.
Anyway, just keep reading, it's amazing how much there is to learn here
My suggestions for best apps for the Tilt are:
Kaiser Tweaks (one click reg edits for many useful items)
SPB Pocket Plus (today screen interface, which looks cool, and is so useful for quick access to programs, files etc.)
All SPB products are pretty cool, and there are several to choose from depending on your needs
S2U2 (slide to unlock program, very useful, although the Tilt seems locked when in suspend mode, it really isn't)
PS: You're right alot of people do just tell you to go search, but believe it or not, there are MANY people here, who are willing to help a newbie, and understand that sometimes searches don't give us the answers we need. I have received tons of help from very nice people here.
hi guys, ive just moved house and i cant find the software discs for my xda!!! does anybody know where i can obtain a set of them?
thanks for your help
tried o2 and ebay and searched the web, any help would be great?
What software discs are you actually looking for? Can't say as i have ever needed anything off the discs that came with my Alpine or Himalaya.
what do you need off the disks? if its activsync just download it from microsoft
OK, FWIW i have found the two CDs that came with my Alpine and will upload them somewhere when i can get ISOs created
cheers guys
thanks for the replys guys, im sorry i took so long to reply but ive been away with the family for a few days...all i was after on the discs was the original software files that came packaged, my discs have grown legs in the move!
just wanting to keep things organised, active sync has been downloaded too!
has anybody tried the bluetooth gps from holox on ebay? 54 channel job?
thanks again for your help and time guys xxx
Having trouble uploading one of the ISOs at the moment, it is at home and i am not and the upload last night died half way through. It is 260Mb and contains Outlook and Active Sync, the other is a lot smaller and contains whatever apps O2 put on it, cant remember and dont have the CD to hand to check. Download it from Adrive
thanks mate will get the download soon as i get home from work tonight, your a star thank you xxx
Here's the other one also on ADrive
Application CD contains:
Fonix_VoiceDial
Zip
TrueFax
SPB GPRS Monitor
This CD conatins
Outlook 2002
ActiveSync 3.7
As i said i haven't used any of the above.
cheers thats great, anytime i can help just drop me a line xxx
any idea where i can find the mms settings for my xda2i on t mobile? im just off to search the forums too xx
jubilant said:
cheers thats great, anytime i can help just drop me a line xxx
any idea where i can find the mms settings for my xda2i on t mobile? im just off to search the forums too xx
Click to expand...
Click to collapse
That i can't hep with, sorry, never been a big MMS user. I think the T-Mobile site will send you the settings.
otherwise doing a search in networking forum for "tmobile AND mms" would likely give a result
cheers guys i gave t-mob a call last night and the 5 year old on the other end of the line was no help at all, not a shock but still a fair price for no service eh? right time to dive deep into the forums,
your help has been great, the wife now wants me to get her an xda !!!