Related
Hi all.
I have folowing device:
OS 1.3.9.4 RUS
GSM 1.13.10
ExtRom 1.1.7.105
Date 9/29/05
1. After I install GSM ver.1.13.10, i have most discharging batary (short batary-life). It' not good. :-(
Question: Can I install now ver.1.12.10 (previosly installed)?
2. I have strange problem with GSM.
Phone indicator showing good coverage zone of GSM, but incoming calls may not be received (auto response from operator voice system). Only after I calling to any phone number from my device, incoming calls will be good.
Question: Can I do something, or it's hardware problem?
3. I have strange problem with GPRS.
When I turn device ON, GPRS works OK.
But, after some time (with no changing place, where I standing), device can't connect (!) to GPRS. Soft reset -> GPRS work good. After some time -> same problem. After reset -> good work.
Question: Can I do something, or it's hardware problem?
4. Can I do full ROM backup with any software?
I would like to have a FULL BACKUP on a case of warranty service. So that I could do upgrading on mu choice, but in case of breakage of the device that I could restore a BACKUP and give device to repair without superfluous claims from service-center to insertions.
Question: What software can do that?
1. That's true, Radio 1.13.10 works bad with OS 1.3.9.4. You should downgrade it to 1.12.10, file is here:
ftp://xda:[email protected]/Uploads/HTC_Wizard/Radio_Roms/
2. Try radio 1.12.10.
3. This is MTS(Moscow) problem. Still no way to fix it.
4. There is no public programm yet to backup full rom. But you can do it using SD-Card.
Button said:
4. There is no public programm yet to backup full rom. But you can do it using SD-Card.
Click to expand...
Click to collapse
What?
How can I do a full backup using a SD-Card?
Button said:
4. There is no public programm yet to backup full rom. But you can do it using SD-Card.
Click to expand...
Click to collapse
Also you can use aWizard 1.2, no cards.
But with aWizard, if I create a Backup I understood that I backup only the OS and not the entire ROM (tell me if I'm wrong).
The next question is: can I flash an I-Mate Rom and then (in case of need) reflash back my original ROM created with aWizard? After this I'll have a PDA like now?
3. My fried using I-Mate S110 on the same cellular provider (MTS-RUS, Moscow), and have no that problem. And I see him on ICQ (via GPRS) almost all time (24h).
I'm thinking, that problem is in the device (hard or soft).
I using GPRS versions: 1.10.0, 1.12.0, 1.13.0 and problem not resolved.
Maybe problem in OS? Or ExtROM?
Maybe I must install I-Mate ROM or T-Mobile ROM? Or something else? (what else for Q-9100-compatible?)
gnitvik said:
3. My fried using I-Mate S110 on the same cellular provider (MTS-RUS, Moscow), and have no that problem. And I see him on ICQ (via GPRS) almost all time (24h).
I'm thinking, that problem is in the device (hard or soft).
I using GPRS versions: 1.10.0, 1.12.0, 1.13.0 and problem not resolved.
Maybe problem in OS? Or ExtROM?
Maybe I must install I-Mate ROM or T-Mobile ROM? Or something else? (what else for Q-9100-compatible?)
Click to expand...
Click to collapse
Yes, it is. There is no problem with Magician. But it was. It was fixed by new 'radio' release. But still no 'radio', which can fix it at Wizard.
Kostia said:
But with aWizard, if I create a Backup I understood that I backup only the OS and not the entire ROM (tell me if I'm wrong).
The next question is: can I flash an I-Mate Rom and then (in case of need) reflash back my original ROM created with aWizard? After this I'll have a PDA like now?
Click to expand...
Click to collapse
1. You can find the following in its options description:
<b - Backup OS, Radio and Extended ROM from device>
May be it will not solid file. It seems to me it's convinient enough, you could experiment with different OS, radio ROMs and Extended ROMs.
2 . I guess yes. May be extept splash screen if it is different in I-mate ROM. Somebody already published link for clouds splash flash file.
vishny said:
1. You can find the following in its options description:
<b - Backup OS, Radio and Extended ROM from device>
May be it will not solid file. It seems to me it's convinient enough, you could experiment with different OS, radio ROMs and Extended ROMs.
2 . I guess yes. May be extept splash screen if it is different in I-mate ROM. Somebody already published link for clouds splash flash file.
Click to expand...
Click to collapse
I don't doubt that it's fantastic to experiment different solutions....
If the only problem it's the splash screen I will reflash a WWE Qtek (ITA Qtek it's not on the FTP) and then reflash back my ROM with aWizard!
Thanks!
Kostia said:
I don't doubt that it's fantastic to experiment different solutions....
Click to expand...
Click to collapse
My be you are right. But someone searches ROMs for better performance or stability etc.
I used this way to find radio ROM to fix MTS GPRS trouble. Unfortunately still with no success...
gnitvik said:
Hi all.
2. I have strange problem with GSM.
Phone indicator showing good coverage zone of GSM, but incoming calls may not be received (auto response from operator voice system). Only after I calling to any phone number from my device, incoming calls will be good.
Question: Can I do something, or it's hardware problem?
Click to expand...
Click to collapse
Had the same problem with my S100, called t-mobile. They said if you have a constant GPRS connection this problem could arrise, so you have to close your gprs connection after use. (was not the problem in my case).
Another cause according to t-mobile was, if you have phone on constantly something went wrong in the network. They advised me to switch the phone-mode off once a day. And then turn it on again so it would register again in the network. This worked for me.
hope it helps.
Greets Migheltje
MTS is now working with this issue. Such a problem with GPRS\MMS exists now in all WM5 HTC devices.
Button: 13 Radio with the latest test ROM. Battery life seems to be much shorter than 1.6.7.9 with 12 Radio. Which OS version do you think suits 13 Radio to reach 1.1.7.9 with 12 radio battery life?
[CpD said:
bob]MTS is now working with this issue. Such a problem with GPRS\MMS exists now in all WM5 HTC devices.
Click to expand...
Click to collapse
:shock: Please specify with which issue exactly? How about GPRS issue:
http://forum.xda-developers.com/viewtopic.php?t=34138
This problem is in Qtek 9100/k-jam only, I guess it's because of EDGE support. I tried to flash various radio ROMs, it didn't help.
[CpD said:
bob]MTS is now working with this issue...
Click to expand...
Click to collapse
Good news . Waiting for results...
Button: 13 Radio with the latest test ROM. Battery life seems to be much shorter than 1.6.7.9 with 12 Radio.
Click to expand...
Click to collapse
What's the latest test ROM? Never heard about 1.6.7.9 before.. Is it russian one?
Which OS version do you think suits 13 Radio to reach 1.1.7.9 with 12 radio battery life?
Click to expand...
Click to collapse
I don't really know, i refused 1.13 because of a bad work (frequent connection losses, 'abonent is not available now'...). It was tested with O2 1.5.4.2.
vishny said:
[CpD said:
bob]MTS is now working with this issue. Such a problem with GPRS\MMS exists now in all WM5 HTC devices.
Click to expand...
Click to collapse
:shock: Please specify with which issue exactly? How about GPRS issue:
http://forum.xda-developers.com/viewtopic.php?t=34138
This problem is in Qtek 9100/k-jam only, I guess it's because of EDGE support. I tried to flash various radio ROMs, it didn't help.
Click to expand...
Click to collapse
Qtek 8300\8310 - the same problem.
Button said:
What's the latest test ROM? Never heard about 1.6.7.9 before.. Is it russian one?
Click to expand...
Click to collapse
Russian one. Newer OS, IPL, SPL.
[CpD said:
bob]
Button said:
What's the latest test ROM? Never heard about 1.6.7.9 before.. Is it russian one?
Click to expand...
Click to collapse
Russian one. Newer OS, IPL, SPL.
Click to expand...
Click to collapse
And what the sense in newer IPL, SPL at all? What advantages?
I don't see them. New OS enables you to use BT-stereo hs, some changes in interface design - at a first glance
And where it is possible to find 1.6.7.9? :?:
[CpD said:
bob]...New OS enables you to use BT-stereo hs...
Click to expand...
Click to collapse
It looks like AKU2, doesn't it? :?
Hi,
Ever since upgrading to 2.17 (official QTEK version) I can no longer get a stable WiFi connection - I get poor signal displayed even though I am next to the AP and it can take anything from 5 to 20 attempts to get connected.
The 9100 came with 1.6.7 installed which not perfect more or less connected first time, but I hoped the later ROMs would fix some other stability problems.
I have tried AKU 2.3 and I still get the same issues (plus I miss the battery indicator in the top bar).
Also, I cannot get back to 1.6.7 (I managed to get the OS back to it but the other 2 were stuck at 2.4) as every time I try I get vendor ID is wrong.
Any ideas?
Cheers,
Taomyn
I have the same problem, but even worse. I see the network after connecting it says it is connected but I cannot browse or do anything on the "socalled Internet" DHCP says that it found an adress in my case at home 192.168.1.33.
I am not sure if an upgrade would help.
My wifi version is 01.04.10
I am looking for any idea too.
Just an update, though the problem remains.
I have downgraded the OS to 2.17 as it seems better than the later ones posted and is at least a QTEK one.
Still hit and miss with the WiFi
Does anyone know if there are any later QTEK ROMS available?
search this forum to find a solution to downgrade the rom version to 1.x then do CID unlock using aWizard.
or you should try upgrade to cingular 2.25WWE rom to see if there is any improvement.
huangyz said:
search this forum to find a solution to downgrade the rom version to 1.x then do CID unlock using aWizard.
or you should try upgrade to cingular 2.25WWE rom to see if there is any improvement.
Click to expand...
Click to collapse
I did try various of the downgrade tips but none seemed to work even though I've got a G3, so hopefully the LokiWiz will be updated soon to work on v2 ROMS.
The Cingular 2.25 ROM didn't work very well either and I hated the extra rubbish it comes with. The radio ROM I happen to be using was from that same one.
I suppose I could go for the 2.25 OS but not the Extension - would that leave behind the Cingular crap?
Taomyn said:
I did try various of the downgrade tips but none seemed to work even though I've got a G3, so hopefully the LokiWiz will be updated soon to work on v2 ROMS.
The Cingular 2.25 ROM didn't work very well either and I hated the extra rubbish it comes with. The radio ROM I happen to be using was from that same one.
I suppose I could go for the 2.25 OS but not the Extension - would that leave behind the Cingular crap?
Click to expand...
Click to collapse
I now run 2.25rom without its original Extrom. It works perfect for me.
huangyz said:
I now run 2.25rom without its original Extrom. It works perfect for me.
Click to expand...
Click to collapse
Thanks. I have now loaded the following but with the QTEK 2.17 Extension ROM:
IPL: 2.24
SPL: 2.24
GSM: 02.25.11
OS: 2.25.11.1
I will have to wait until tonight to try the wireless at home.
One thing I've noticed is that I don't have a battery indicator at all now, neither in the Today window or the bar at the top. I'll dig around more to see why this has happened.
Taomyn said:
huangyz said:
I now run 2.25rom without its original Extrom. It works perfect for me.
Click to expand...
Click to collapse
Thanks. I have now loaded the following but with the QTEK 2.17 Extension ROM:
IPL: 2.24
SPL: 2.24
GSM: 02.25.11
OS: 2.25.11.1
I will have to wait until tonight to try the wireless at home.
One thing I've noticed is that I don't have a battery indicator at all now, neither in the Today window or the bar at the top. I'll dig around more to see why this has happened.
Click to expand...
Click to collapse
it looks a little strange that you have a 2.25OS with 2.24IPL/SPL. :?
you could put a bat. icon on task bar by running Windows\Init_Tray.exe
Ok so I still can't get WiFi working :-( but at least I've sorted the the battery indicator out (thanks to a reg tweak for AKU2.2)
Which leads me to this AKU stuff. I keep reading about 2.3 but I'm not sure if this is an official release or something that someone has put together. I'm willing to give it a try but not if it's just 2.2 with some tweaks or something like that.
Can anyone shed some light on the AKU releases? Mine definitely says 2.2 at the moment.
Oh and can I simply create an upgrade file with just the 2.3 OS file in it?
TIA
Ok, my WiFi is still borked, it sees AP's all over the place but the ones I know it should connect to the phone just will not lock on to - it tries for a few seconds then simply says "Unavailable".
Currently I have on the phone a combination of:
IPL: 2.24
SPL: 2.24
GSM: 02.25.11
OS:2.24.10.1 WWE
Protocol: 4.1.13.12
ExtROM: 2.17.7.102
WM5 5.1.95 (14955.2.3.0)
I've actually tried what should have been a later OS, 2.25, but the AKU was 2.2 and the copyright message shows 2005 where as this one is AKU 2.3 with 2006 displayed.
I'm thinking now that perhaps the Extended ROM which is from the latest QTEK build I could find. Can anyone suggest a good replacement for it that doesn't have a load of baggage and only useful customisations?
As a last resort I'd like to try downgrading back to full 1.x ROM (QTEK 1.6.7 I think) but as I understand it this may not be possible. If it can be done, can anyone point me in the right direction i.e. which downgrade ROM to try? Yes, I have gone through this forum but it's almost "information overload" and very confusing,
TIA
if you update to shipped Cingular 2.25WWE rom, you can bypass all the extrom and see if wifi works normal (before you install other apps.)
Mine is ok.
the AKU2.3 one is a custom test rom which may cause slightly unstable.
while this still doesn't work, i think there's no means except sending your device back for checkup and repair.
Thanks, but how do I "bypass all the extrom"? Is there a clean extrom I can use with it?
Ok, I'm making progress.
I followed the instructions for downgrading, which although says it won't work for 2.21 or above, sort of does.
I downgraded to the custom 1.5.4 which succeeded but left SPL still at 2.24 but everything else had changed. I then ran the LokiWiz v0.2b and that seemed to succeed too at least there were no errors.
I then tested WiFi and it locked and connected first time - yay!!
Next I have taken the 1.6.7 QTEK ROM (which the phone originally had) and when that finished both IPL/SPL were downgraded to v1.x - WiFi still working.
At least now I know that WiFi is not borked but it's some strange ROM issue.
I'm going to try QTEK's 2.17 ROM and see what happens - at least I know I can get back to 1.x if it still doesn't work.
This is fun - not!!
Taomyn said:
Thanks, but how do I "bypass all the extrom"? Is there a clean extrom I can use with it?
Click to expand...
Click to collapse
after the RUU completed and restart automatically, after those init setting you must follow(eg. align screen, select time zone, etc.), at the moment when u see "customize within 3 seconds", poke the reset hole as quick as you can. Then you Bypass the extrom installation.
Thanks - you are being a great help, it's much appreciated.
I went back to 1.6.7 then added the Cingular 2.25 OS ROM but with the QTEK 2.17 extended ROM. What a mixture that is! WiFi would not work. I then hard reset and used your bypass technique - WiFi now works.
It seems that an extended ROM application is screwing up WiFi so I need to get everything up to the latest and greatest, bypass the extended ROM then one by one run them to see which is the culprit.
The plot thickens......
Well it looks like *any* v2 ROM screws up the WiFi on my phone and I have no idea why :x I have tried various combinations of ROM parts (proving the phone is most definitely CID unlocked :wink: ) and I either have no WiFi or some which progressively gets worse as time goes on to the point it stops connecting again.
I'm back to the original 1.6.7 QTEK WWE shipped ROM and WiFi works flawlessly but I'm now missing all the nice tweaks of v2 and I'm sure my BT headset doesn't work as well as before.
Maybe the next release will be better :?
Just to conclude this thread. The 2.26 ROM recently released seems to have cured my WiFi woes and it has made my phone run so much better than before.
I recommend it to anyone
Taomyn said:
Just to conclude this thread. The 2.26 ROM recently released seems to have cured my WiFi woes and it has made my phone run so much better than before.
I recommend it to anyone
Click to expand...
Click to collapse
Cheers!
wifi probs with 2.26
i just upgraded my MDA USA to this ROM. My wifi now doesnt connect. It was working fine with ROM 1.08. Any suggestions? I havent tried bypassing the ext ROM, will this work? thanks
Same problem here as above
I got same wifi problem when upgrading from 2.25 to 2.26 .
i am going to revert back to 2.25 which is from the imate website. and hope it sorts it.
will get back to you when done.
Hi everybody,
Basic Info
Here it is, finally, the first RC (Release Candidate) version of AKU 3.2. This ROM contains the following:
- AKU 3.2 ROM based on the T-Mo 2.26 ROM
- Cingular 2.25 radio (since it is the best)
- Totally empty extended ROM (since this is a clean base ROM)
- Cingular bootscreen (because, uh, blue looks much better than pink )
- NO IPL/SPL so G4 owners can flash it as well
What's new in AKU 3(.2) since AKU 2.3?
- 2x zooming for videos in WMP (added in AKU 2.6)
- Slightly faster device
- Slightly improved boot time
- AKU 3 improvements are:
- Internet Sharing utility instead of Modem Link
- WPA2 support for WiFi Note: not working yet
- Improved BT Stack
- vCard support in SMS
- SMS can be saved to the SIM Card
- SMS over GPRS (if your provider supports it)
- MP3 ringtones for everything (Phone, SMS, events) Note: not working yet
- Improved welcome exe (can skip tap'n'hold tutorial, can set up email account, can set the time)
You can read more here.
Requirements
You MUST have a 2.x IPL/SPL on their devices. If you have 1.x, install first a 2.x ROM that has one.
Known bugs
- There may be problems with ActiveSync internet pass-thru
- Microsoft Voice Command will not work.
- No A2DP
- No WPA2
- MP3 still only for Ringtones
- Problems with SPB Pocket Plus
Disclaimer
While it is really hard to brick your device with this package (since it is not touching the bootloader aka. IPL/SPL), still, standard disclaimer applies: Flash this ROM at your own risk!
What's next?
When I'll have enough time I might make a ROM with extra stuff but that ain't gonna happen till this weekend or so.
Download
WM5 AKU 3.2 ROM version 1.0 RC1 for HTC Wizard (49.5 MB)
Extra note
This rar was created with WinRar 3.6 final. It is possible that you get errors at decompressing with older version so if that is the case, go to http://www.rarlab.com and install the latest version the try again.
GREAT WORK KTAMAS!!!!
Downloading now... I'll let you know as soon as i'll have it installed!
Bye!!!
PS: Is the CF2 included in this rom? If it is not and you want to integrate it, i can send you the files and a cab containing the necessary registry entries.
Bye
risidoro said:
GREAT WORK KTAMAS!!!!
Downloading now... I'll let you know as soon as i'll have it installed!
Bye!!!
PS: Is the CF2 included in this rom? If it is not and you want to integrate it, i can send you the files and a cab containing the necessary registry entries.
Bye
Click to expand...
Click to collapse
No CF2. Sure, you can email me the packages, thanks.
KTamas said:
No CF2. Sure, you can email me the packages, thanks.
Click to expand...
Click to collapse
I'll send you shortly.
So far:
Activesync USB (NDIS): OK
WiFi: ok
GPRS: ok
Phone: ok
Bluetooth: not yet tested (BT PAN is supported! Great!)
MMS: you need to enable it using one of the cabs found in the 2.26 extrom
All default programs are ok!
SO FAR IT'S GREAT!
Hot! I'm going to be giving it a shot shortly here.. Going to go download it now..
EDIT: Hot.. Upgraded now.. Like the green.. Will be testing everything out very very very very soon here..
Great job, guys!
Damn, i don't have my Wizard at the moment.
Looking forward to get it back and try this stuff!
I always get error 224... what am I doing wrong?
digitaly said:
I always get error 224... what am I doing wrong?
Click to expand...
Click to collapse
What is Error 224 exactly? :roll:
finally working aku 3.2
just flashed on cingular 8125, everything seems fine
Extened Roms
Hi there, I'm a bit of a newbie. How do I install an extented rom?
Ta, Rin.
Connectivity Issues.
I have a Cingular 8125.
Upgraded from AKU 2.3 (TMO USA 2.26 OS) to this.
==================================
THE GOOD:
ActiveSync works fine syncing data with my PC.
SMS (Text Messages) work both in and out.
Phone Works.
Bluetooth Works with my normal headset (Jabra BT500).
THE BAD
Internet connection won't work. I have proper GPRS Settings for Cingular (tried both ISP & WAP settings) but the connection fails always (saying the answering modem has disconnected).
When I try to use AS Pass-through it simply can't find the page.
I have tried your ROM, but unfortunatelly it flashed only bootimage (Cingular) and cleared ExtROM from Vario (from T-Mobile CZ) of my boss...
Any help? Thanks.
i added this to my beta rom.. i am installing now to test
Re: Connectivity Issues.
kyphur said:
.
THE BAD
Internet connection won't work. I have proper GPRS Settings for Cingular (tried both ISP & WAP settings) but the connection fails always (saying the answering modem has disconnected).
When I try to use AS Pass-through it simply can't find the page.
Click to expand...
Click to collapse
as pass-through and wi-fi working for me. didn't try gprs
Re: Connectivity Issues.
kyphur said:
I have a Cingular 8125.
Upgraded from AKU 2.3 (TMO USA 2.26 OS) to this.
ActiveSync works fine syncing data with my PC.
SMS (Text Messages) work both in and out.
Phone Works.
Internet connection won't work. I have proper GPRS Settings for Cingular (tried both ISP & WAP settings) but the connection fails always (saying the answering modem has disconnected).
When I try to use AS Pass-through it simply can't find the page.
Click to expand...
Click to collapse
Hmm, I've set up my GPRS account and first it connected, but didn't load anything. Did a soft reset, now it works well.
Re: Connectivity Issues - GPRS Dead
itissat said:
kyphur said:
.
THE BAD
Internet connection won't work. I have proper GPRS Settings for Cingular (tried both ISP & WAP settings) but the connection fails always (saying the answering modem has disconnected).
When I try to use AS Pass-through it simply can't find the page.
Click to expand...
Click to collapse
as pass-through and wi-fi working for me. didn't try gprs
Click to expand...
Click to collapse
I did a soft reset and AS Pass-through is now working. GPRS is still Dead though.
KTamas said:
digitaly said:
I always get error 224... what am I doing wrong?
Click to expand...
Click to collapse
What is Error 224 exactly? :roll:
Click to expand...
Click to collapse
I unlock the cid... after I click on PDA Phone ROM Update utility I get this error 224... but my phone sync and I can read all the files from my computer no problems... It's must be a problem related to the my activeSync 4.2.0
Re: Connectivity Issues.
kyphur said:
I have a Cingular 8125.
Upgraded from AKU 2.3 (TMO USA 2.26 OS) to this.
==================================
THE GOOD:
ActiveSync works fine syncing data with my PC.
SMS (Text Messages) work both in and out.
Phone Works.
Bluetooth Works with my normal headset (Jabra BT500).
THE BAD
Internet connection won't work. I have proper GPRS Settings for Cingular (tried both ISP & WAP settings) but the connection fails always (saying the answering modem has disconnected).
When I try to use AS Pass-through it simply can't find the page.
Click to expand...
Click to collapse
It seems that AKU3 has a nasty bug: it fails to connect to a GPRS APN if it requires username/password. GPRS works for me cause my provider needs no UN/PW.
Edit: On the other hand, AS Passthru is not working for me.
beecher said:
I have tried your ROM, but unfortunatelly it flashed only bootimage (Cingular) and cleared ExtROM from Vario (from T-Mobile CZ) of my boss...
Any help? Thanks.
Click to expand...
Click to collapse
What IPL/SPL version do you have?
Re: Connectivity Issues.
KTamas said:
It seems that AKU3 has a nasty bug: it fails to connect to a GPRS APN if it requires username/password. GPRS works for me cause my provider needs no UN/PW.
Click to expand...
Click to collapse
Is this documented anywhere?
If that is the case then it looks like I'll probably have to exclude myself from this project (which would blow chunks).
Dear all Kaiser anchestor,
I have a problem with my Kaiser. I really hope that all of you can help me. Ok? Please....
This is the problem :
At the begining, My HTC Kaiser run so slowly, sometimes freezing (Condition WM 6.1 with it's SPL 1.56)
After I read the same problem in jockyw2001 thread, then I tried to flash My device SPL to 3.28 (with the step in front of that thread and the SPL from that thread too)
Flashing the SPL to 3.28 was successfully and my device run fast now
BUT!!! I can't Enabled my WiFi!
Next, I tried to Re-Flash my SPL to 1.56 again, and it's done successfully. But, the WiFi still can't be enable.
Next step, I tried to downgrade the ROM to WM 6, and WHAT!
I still can't Enable my WiFi!
Now, I'd upgrade to WM6.1 again (official ROM from HTC website). But, the WiFi still can't be enable.
The condition when I enable the WiFi is loading then turn off by itself. What's the problem?
I really need all of your help for this.
This is my Device Information:
ROM Version :3.29.707.0 WWE
ROM Date : 05\07\08
Radio Version :1.65.16.25
Protocol Version : 25.83.40.02H
After upgrade to WM6.1, My Bootloader now is:
KAIS130
SPL-3.29.0000
CPLD-8
I'm stress already. Hope all you may spare some of your time for help me to solve the problem. Thanks before. For more detail, just watch the video that I record when tried to enable the wifi.
The url is : http://www.andrylim.com/others/WifiProblem.wmv
Whats wrong with running the HTC upgrade on your HTC original TyTN II?
andrylim said:
After upgrade to WM6.1, My Bootloader now is:
KAIS130
SPL-3.29.0000
CPLD-8
Click to expand...
Click to collapse
Since you're interested in running the official HTC WM 6.1 version on your TyTN II then why not simply run the HTC Upgrade program which will reinstall everything required (SPL, Radio and ROM) in one easy go rather than have to upgrade this and that, bit by bit? If you have an official TyTN II you can get it from HTCs e-Club/Support or you can also download it from the XDA Kaiser Wiki ROM page. Note that my SPL is 3.28.0000 and thats all through the official upgrade path so maybe your SPL has something to do with it? See if the official upgrade installs on your device otherwise you'll have to revert to the correct SPL before trying again. Note that the newest WWE ROM upgrade now also comes with a (slightly) better radio as in my sig. Remember to take your sim and memory cards out before attempting the flash.
***Edit*** Just realised you're running the SEA rather than WWE HTC ROM I'm using so yes 3.29 looks to be the right SPL for your ROM, the rest still applies though.
Hmm...
Sorry Mr Flying Kiwi, I think you didn't read the message completely. I've already re-flash from OFFICIAL ROM WM6.1 from HTC e-Club. But, the same problem. It's not fix yet. I've reflash over than 5 times, downgrade to WM6 over than 2 times. an the result is the same. My WiFi Cannot be enable. I hope you can play the video that i record from the links up there (440kb only), so you will know my problem.
Thanks for your reply Boss!
or this one
The url is : http://www.andrylim.com/others/WifiProblem.wmv
Flying Kiwi said:
Since you're interested in running the official HTC WM 6.1 version on your TyTN II then why not simply run the HTC Upgrade program which will reinstall everything required (SPL, Radio and ROM) in one easy go rather than have to upgrade this and that, bit by bit? If you have an official TyTN II you can get it from HTCs e-Club/Support or you can also download it from the XDA Kaiser Wiki ROM page. Note that my SPL is 3.28.0000 and thats all through the official upgrade path so maybe your SPL has something to do with it? See if the official upgrade installs on your device otherwise you'll have to revert to the correct SPL before trying again. Note that the newest WWE ROM upgrade now also comes with a (slightly) better radio as in my sig. Remember to take your sim and memory cards out before attempting the flash.
***Edit*** Just realised you're running the SEA rather than WWE HTC ROM I'm using so yes 3.29 looks to be the right SPL for your ROM, the rest still applies though.
Click to expand...
Click to collapse
Use the official upgrade package - not just the rom file
andrylim said:
Sorry Mr Flying Kiwi, I think you didn't read the message completely. I've already re-flash from OFFICIAL ROM WM6.1 from HTC e-Club.
Click to expand...
Click to collapse
I read it alright but as you've not done it *using the officially supplied HTC upgrade package (not just the ROM file within it from HTC e-Club)* I reccomend you give that a try. No special hard spl version is reqd and as long as you have an official ROM to start with and you're upgrading or reinstalling the same ROM version, it's simply a case of running one file and following the instructions. Once you've got the reflash to run that way and completed the process, simply hard reset and then test your Wifi before installing anything further.
But, the same problem. It's not fix yet. I've reflash over than 5 times, downgrade to WM6 over than 2 times. an the result is the same. My WiFi Cannot be enable. I hope you can play the video that i record from the links up there (440kb only), so you will know my problem.
Click to expand...
Click to collapse
Perhaps the capturing program over Activesync may be interfering with things (but I did view your wmv). What I am sure of is that if you have the correct ROM matched to your device and correctly installed with the right spl and radio, Wifi should work fine. Running the official upgrade is the easiest way to get this but if there is something non-official about your current setup, the upgrade program may refuse to run. Let us know if that happens. It's clear that you didn't do this in the beginning because you ended up with the wrong spl version for your rom so it's time to do it the official 'HTC Customer' way.
Hahaha.... thanks for your information. I'd tried yesterday. And still no response. ugh.... Btw, I've read from another thread (Athena). They said that someone ever got a problem like this. The cause is the WiFi MAC Address is missing/erased? Is it possible? I thought that MAC Address is a serial number of WiFi such as an IP, where saved in WiFi chip/device and cannot be erase. If do so, how to set an MAC address to the WiFi module? Do you have an idea? I'd tried to have a silly search about that address in Registry, but I cannot find any key that sounds about MAC Address. (Mac Gyver maybe?)
Flying Kiwi said:
I read it alright but as you've not done it *using the officially supplied HTC upgrade package (not just the ROM file within it from HTC e-Club)* I reccomend you give that a try. No special hard spl version is reqd and as long as you have an official ROM to start with and you're upgrading or reinstalling the same ROM version, it's simply a case of running one file and following the instructions. Once you've got the reflash to run that way and completed the process, simply hard reset and then test your Wifi before installing anything further.
Perhaps the capturing program over Activesync may be interfering with things (but I did view your wmv). What I am sure of is that if you have the correct ROM matched to your device and correctly installed with the right spl and radio, Wifi should work fine. Running the official upgrade is the easiest way to get this but if there is something non-official about your current setup, the upgrade program may refuse to run. Let us know if that happens. It's clear that you didn't do this in the beginning because you ended up with the wrong spl version for your rom so it's time to do it the official 'HTC Customer' way.
Click to expand...
Click to collapse
More specifics needed
andrylim said:
Hahaha.... thanks for your information. I'd tried yesterday. And still no response. ugh...
Click to expand...
Click to collapse
I was offering serious advice not pulling your leg. Now, when you say 'still no response yet' - precisely what do you mean (exactly what did you try and what happened)? I've flashed my Kaisers ROM a couple of times now using HTC official ROM upgrading packages and it's gone perfectly fine. As far as the MAC address goes, I know there are ways of changing it (because there is an extremely small possibility that you may end up with two identical MAC adresses on the same network and this will cause problems) but this won't be the culprit in your case. I think (again) the first thing to do is to use the official package (and only that - no additional tools/utilities are reqd) to get everything in order and let us know how that goes and what versions of everything you end up with.
This is the information that appears in my device now after re-upgrade the official ROM from HTC e-Club:
File name : RUU_Kaiser_DOPODASIA_WWE_3.29.707.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
KAIS130
SPL-3.29.0000
CPLD-8
ROM version : 3.29.707.0 WWE
ROM date : 05/07/08
Radio version : 1.65.16.25
Protocol version : 25.83.40.02H
Btw, may i ask a question? I found something strange about a MAC address. Yesterday I'm not intention open the "Wireless LAN" from Settings > Connections > Wireless LAN
In Advance tab, there are Status, MAC, and IP. My Question is is the MAC address serial appears even you didn't enable a WiFi? In my device it's empty.
Btw, bro... I've been search a problem like this in this website. I've found the same problem in Athena thread. They said that the MAC address is missing, but some one make a fix but only for Athena.
this their URL: http://forum.xda-developers.com/showthread.php?t=387454&highlight=Athena+WiFi+Problem&page=5
Thanks & sorry if i waste your time in solving my wifi problem
Flying Kiwi said:
I was offering serious advice not pulling your leg. Now, when you say 'still no response yet' - precisely what do you mean (exactly what did you try and what happened)? I've flashed my Kaisers ROM a couple of times now using HTC official ROM upgrading packages and it's gone perfectly fine. As far as the MAC address goes, I know there are ways of changing it (because there is an extremely small possibility that you may end up with two identical MAC adresses on the same network and this will cause problems) but this won't be the culprit in your case. I think (again) the first thing to do is to use the official package (and only that - no additional tools/utilities are reqd) to get everything in order and let us know how that goes and what versions of everything you end up with.
Click to expand...
Click to collapse
andrylim said:
This is the information that appears in my device now after re-upgrade the official ROM from HTC e-Club:
File name : RUU_Kaiser_DOPODASIA_WWE_3.29.707.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
KAIS130
SPL-3.29.0000
CPLD-8
ROM version : 3.29.707.0 WWE
ROM date : 05/07/08
Radio version : 1.65.16.25
Protocol version : 25.83.40.02H
Click to expand...
Click to collapse
That looks right to me but if you haven't yet ran the upgrade file above to flash to ROM you need to do it the official way and try that. If Wifi is still behaving as in your video do a hard reset and try again (before loading any additional software).
Btw, may i ask a question? I found something strange about a MAC address. Yesterday I'm not intention open the "Wireless LAN" from Settings > Connections > Wireless LAN
In Advance tab, there are Status, MAC, and IP. My Question is is the MAC address serial appears even you didn't enable a WiFi? In my device it's empty.
Click to expand...
Click to collapse
In mine it's empty too but if you go back in after enabling Wifi, theres a MAC address in there. I really don't think your problem has anything to do with the MAC address but if you've tried all of the above and still can't get it working, as you appear to have an official setup, it's time to contact Tech support and get them to go through some checks over the phone with you. Maybe someone else has thoughts on this......
Hahaha... thanks. Btw, I have another problems.
I bought this device from other country (Singapore). My friends said, the Singapore HTC can view the device history. They can see if the device already being flash how many times and anything unofficial program such as SPL or radio, then the warranty wil be void. Because, my friends already have such a problem also with his device Dopod U1000 (Even he revert to his original SPL or radio).
I think i should throw this device or sell it out and buy the new one. Hiks...
Flying Kiwi said:
That looks right to me but if you haven't yet ran the upgrade file above to flash to ROM you need to do it the official way and try that. If Wifi is still behaving as in your video do a hard reset and try again (before loading any additional software).
In mine it's empty too but if you go back in after enabling Wifi, theres a MAC address in there. I really don't think your problem has anything to do with the MAC address but if you've tried all of the above and still can't get it working, as you appear to have an official setup, it's time to contact Tech support and get them to go through some checks over the phone with you. Maybe someone else has thoughts on this......
Click to expand...
Click to collapse
andrylim said:
I think i should throw this device or sell it out and buy the new one. Hiks...
Click to expand...
Click to collapse
Doesn't it make sense to at least try what's been suggested first? What have you to loose? The hardware company have no need to know what 'ROM Action' has occurred in the past and who knows what any people you've leant your TyTN II to may have done with it..... They only need to know how it is now and whether it's currently official (ie flashed using the HTC upgrader).
andrylim said:
I think i should throw this device or sell it out and buy the new one. Hiks...
Click to expand...
Click to collapse
I'll give you $50 for it.
The same problem
Im having the same problem... my wi-fi do not turns on! I have flashed this a lot of times, and sometimes works, sometimes dont.
Does anyone have any ideia about this? im stressed becouse i have the same problem... could anyone tellme a good radio in order to try to solve this issue? thanks
Wi-Fi issues
This has worked for me, dont know if its the same case with you or not.
My device was never able to connect to my Wifi n/w at home. If I went to start -> setting -> connections -> Wifi, it would show my home n/w as available, when I tried to connect to it, the status changed from Available to "connecting" then became available again.
In my home n/w I had access type authentication as WEP keys + Mac address filtering. My device was added to the MAC address list so that was not a problem. The issue was access point authentication which was set to WEP keys type authentication on my router. Once I changed from WEP keys to WPA-PSK (data encryption type TKIP) my WM was able to connect to the router.
I have HTC tytn II and its wifi is not searching any other wifi devices or router even in very close range , but wifi is turning on and the green light is also blinking
So, is there a hardware problem?
I did 3.29 hard spl , hard reset ,hard spl 3.34 , but the result is same.
and in network adapters IEEE 802.1b/g goes down and down in the list of network adapters , please HELP.! and sorry for my bad english
try a newer radio
mfsr98 said:
try a newer radio
Click to expand...
Click to collapse
Currently the Radio Version is 1.70.18.02
before this Radio Version I had 1.65.*.*
Hi,
I've flashed all kinds of custom roms after installing HSPL(Energy;4-2/7-2, TouchX, Valkyrie Firestorm, Cristian and others) and also have flashed my Xperia1 with different radio's (also the latest 1.14.55.25 AND installed rilphone). I know I'm doing it right because this is not my first time flashing, but my internet connection stays "dead". I've manually changed the settings to the right ones, softreset.. still no luck. With some roms I do see in CommManager that I'm connected, but when I try to update the weathertab or browse Opera I don't have a working connection. When I flashed it back to the latest stock rom the device still can't get a connection. Does anyone experienced this type of problem and if so, is there a known fix for this? Thnx in advance!
My friend had a similar problem, he was using double SIM card (= he had two sim's in one phone number). Problem got solved when he changed to one sim operator.
With almost all of the roms you have used I had an 3G internet connection when I used the roms.
I use Radio 1.16.25.48 + 1.14.25.55 rillphone.dll
Oz
Try your sim in another phone, see if it can get a GPRS attach. If it can't, then some scrub at your operator might have removed the codes on your account.
I´m having the exact same problem! Difference is my internet connection is sometimes working for 20 seconds or so...
Have you found any solution? I´m going to try talking to my operator again...
My SIM has no problem getting a GPRS attach in another phone.
I just started another topic for this:
http://forum.xda-developers.com/showthread.php?t=632659
I´ve just corresponded with my operator, they say that the problem probably is the phone and that I should send it in for service...
I don´t buy it, to much of a coincidence with two people having the exact same problem.
Wich operator do you have?
Same problem here
x1-xda said:
Same problem here
Click to expand...
Click to collapse
!
This is really strange.
Maybe they are all programmed to stop working during the Olympics...
My phone connects to GPRS/EDGE and connection manager says that data connection is active but when i open IE,Opera,Google Maps or any other network application then it says "server not found" or "connection error" or something similar.
But all worked fine with default WM6.1 ROM.
x1-xda said:
My phone connects to GPRS/EDGE and connection manager says that data connection is active but when i open IE,Opera,Google Maps or any other network application then it says "server not found" or "connection error" or something similar.
But all worked fine with default WM6.1 ROM.
Click to expand...
Click to collapse
For me it´s not working when I go back to original ROM... Have you tried flashing original ROM since your problems started?
No, i didn't try to go back to original ROM.
I will try it tomorrow and post results here.
Had same issue, no internet keep on poping up.
I hard SPL and flashed the stick ROM. Then Hard SPL again and flashed Untamed 1.3 and it's working like a charm...no issue (running from 2days now)
Try out...
Thanks!
x1-xda said:
No, i didn't try to go back to original ROM.
I will try it tomorrow and post results here.
Click to expand...
Click to collapse
Are you on T-Mobile? If so, the phone does not support their network for 3G
MJCS said:
Are you on T-Mobile? If so, the phone does not support their network for 3G
Click to expand...
Click to collapse
My area only has Edge. But 30 miles north of me where my brother works T-Mobile supports 3G.
manishsharmasz said:
Had same issue, no internet keep on poping up.
I hard SPL and flashed the stick ROM. Then Hard SPL again and flashed Untamed 1.3 and it's working like a charm...no issue (running from 2days now)
Try out...
Thanks!
Click to expand...
Click to collapse
Why Hard SPL again if you already have Hard SPL on your phone?
soulseller said:
Why Hard SPL again if you already have Hard SPL on your phone?
Click to expand...
Click to collapse
I flashed the stock ROM (Image and then SPL)...tried to flash ROM's without SPL again and phone wasn't detecting the image file on uSD card...did Hard SPL again and worked perfectly...that's the reason!
Ah, OK.
Maybe I´ll try to go back to stock SPL and then Hard SPL and see if it works.
Or maybe I´ll just send it in and hope thr warranty claim works...
MJCS said:
Are you on T-Mobile? If so, the phone does not support their network for 3G
Click to expand...
Click to collapse
I'm not on T-Mobile.
When i bought this phone, everything was working fine, then i installed hard spl and put custom rom and after that internet connection doesn't work. It worked with stock rom and automatic settings but now doesn't, and i even tried entering all settings manually but no luck. Phone connects to data connection but there is no activity on that connection (0 bytes sent/ 0bytes received) no matter what i do, nothing goes through.
MJCS said:
Are you on T-Mobile? If so, the phone does not support their network for 3G
Click to expand...
Click to collapse
My Xperia X1 supports and works fine with T-Mobile 3G. So doesn't support doesn't compute...
Oz
I solved my problem: my data connection need proxy server to connect to internet but i just removed that checkbox from connection proxy settings and now data connection works