Im having problems upgrading my qtek 9100 g3 pda to a new rom, specifically, the leaked wm6 wwe.
Currently:
IPL 1.01
SPL 2.17
GSM 02.25.11
OS 3.3.0.0
I have tried going straight to the wm6 rom but vista says the program has stopped responding. I have also tried reverting to buttons 1.05 ROM, with the same result.
Lastly, I tried reverting to the T-mobile 2.26 ROM, but this doesnt work either.
I am at a loss now, any suggestions would be greatly appreciated.
Thanks
From the sticky:
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
try doing it on a machine that isnt running Vista
I have version 2.25 of the IPL/SPL for the cinguler 8125.
How do I upgrade it?
If you are not going to upgrade WM6, you don't need to upgrade IPL/SPL. (Actually, IPL 2.25 is already strong enough to use WM6, 3.08 only provide a little performance improvement)
I have upgraded to 6.0, which is why I am looking for the IPL upgrade
Read the sticky (The Definitive Guide...), there is link to 3.08 IPL.
Thanks very much
i've to flash my wizard with german t-mobile rom, i flashed with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE evrething were ok and i've begin to flash with RUU_Vario_AKU3.3_3822_382120_026911_TMO_DE_GER_Ship.but nothing changed and now after flashing a new rom wizard loads CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE this rom and freezes. ipl 1.01 spl 2.21 what shall i do?
flash again dude!
didn't help) ipl 1.01 spl 3.08.0001
If it is still "ipl 1.01 spl 2.21", then flash Buttons 1.05 ROM and CID unlock your device.
If it is now "ipl 1.01 spl 3.08.0001", then you mixed G3 IPL and G4 SPL. It is a high possibility that you are going to brick it. Try to flash with your original stock ROM. If that doesn't help, then it is a brick.
I believe that my brother' Wizard is CID unlocked already, because I also flashed many WM5 into it. But few days ago I tried to flash the WM6.1 and now it is stuck at the 1st splash screen.
I have a lot experiences from flashing rom by Hermes, Atom, Herald, Kaiser… I have read and tried many time how to solve this problem but it did not work. The re-flashing progress was exellent with ’ CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE’, the screen still say as below:
IPL 1.01
SPL 3.08
GSM 01.12.01
OS 1.5.4.2
But any flash with other roms like T-Mobile 2.26 was stopped by connection or ID errors. The problem is how can I get the IPL/SPL back to 1.xx!
Appreciate any help!
Thanks!
Run the button rom ( custom rom you identified ) again - it can take a few tries, but both your ipl and spl have to be the same 1.xx
You need ipl/spl of 1.xx to unlock
You need ipl/spl of 2.xx to upgrade to wm6
I had to run the button rom twice to achieve this
Good luck
bill_in_mtl said:
Run the button rom ( custom rom you identified ) again - it can take a few tries, but both your ipl and spl have to be the same 1.xx
You need ipl/spl of 1.xx to unlock
You need ipl/spl of 2.xx to upgrade to wm6
I had to run the button rom twice to achieve this
Good luck
Click to expand...
Click to collapse
I know how to do it and did it many (10 ) times with custom rom but no good result. The IPL has been downgarded to 1.01 but SPL is still 3.08.
Anyway, thanks for your reply!
Sorry about that - was just trying to help
Check out the response from mestrini on the attached thread - he mentions something about the spl freezing if you downgrade from 3.xx to 1.xx
I was not aware of this info - and perhaps mestrini can give you some details on how to get around it - if that is the issue here.
http://forum.xda-developers.com/showthread.php?t=377038
Try to bring ipl to 3.08 by reflashing ipl/spl 3.08 to bring both ipl/spl to 3.08 and then flash the official stock rom to downgrade to 2.xx and then downgrade to 1.xx by button's rom 1.05.
Cheers!
zabardast_1 said:
Try to bring ipl to 3.08 by reflashing ipl/spl 3.08 to bring both ipl/spl to 3.08 and then flash the official stock rom to downgrade to 2.xx and then downgrade to 1.xx by button's rom 1.05.
Cheers!
Click to expand...
Click to collapse
I also did it many times by using IPL_SPL_3.08.rar, but after that could not flash with T-Mobile 2.26 rom to downgrade to 2.26. The connection error always appear.
2 days ago, before bringing IPL/SPL to 3.08 I also brought it to 2.26 and the flash ran well. But when I tried to downgrade to 1.xx by button rom 1.05, only the IPL was changed to 1.xx, SPL was still the same as 2.26.
I realized that many people succeeded by doing this but not me even the process is the same step by step! And I really dont know why?
nugift said:
I also did it many times by using IPL_SPL_3.08.rar, but after that could not flash with T-Mobile 2.26 rom to downgrade to 2.26. The connection error always appear.
2 days ago, before bringing IPL/SPL to 3.08 I also brought it to 2.26 and the flash ran well. But when I tried to downgrade to 1.xx by button rom 1.05, only the IPL was changed to 1.xx, SPL was still the same as 2.26.
I realized that many people succeeded by doing this but not me even the process is the same step by step! And I really dont know why?
Click to expand...
Click to collapse
If it had once got spl 2.26,you shud have tried to flash the button's a couple of more times to downgrade the spl to 1.xx,why again you upgraded to 3.08. Now I believe the SPL is locked at 3.08 and it requires more efforts to downgrade to 2.xx,the only way is to keep on flashing the tmo 2.26 some more times,if you are lucky,it might downgrade.Otherwise upgrade to 3.08 and keep using wm5 official stock Rom.
Cheers!