Cingular MMS MDA problems - 8125, K-JAM, P4300, MDA Vario Software Upgrading

So im having a problem with MMS. I get a message in my MMS folder. It will have an envolope that it looks like a VCR tape vertical. It will let me open it but after i select to download it nothing else happens. Now i have noticed that both files are around 19k and 21k. I got a 6k file and was able to download and view it. I have gone to cingulars website and followed their MMS settings. Are there any settings that i need to adjust??

Related

Cannot send MMS pictures or videos

I have an AT&T Tilt. I hit soft reset after a hard reset so that the bloatware didn't install. I can send text messages no problem. I cannot send a picture message. I can sometimes receive them, but I cannot send them from my phone. I have been trying to send them to a Verizon phone and have not tried an AT&T phone. Has anyone had a similar issue where they weren't able to send a picture message and resolved it?
tytn/tytn II mms
Never worked with wm6 correctly (finland, tytn/tytnII)
-Using port 9201 & WAP version 1.2 -> MMS under 70k possible to send and receive, higher not (when sending , it just hangs in 99%).
-Using port 8080 & WAP version 2.0 -> MMS up to 600k send ok, never able to receive "errMsg: error" (your messages cannot be downloaded).
This is only my experience (Elisa Finland). other providers and countries propably work ok.
anyone?
You won't have your AT&T operator settings installed with the method you used to eliminate the 'bloatware' Search for the Network settings cab on this forum as it may help you.
I found out the problem. AT&T can send and receive up to 600k. Verizon can only receive and send up to 350K. I had to change the outbound pictures to QVGA size and had to adjust the video to a smaller file. I guess different have different size limitations. In case anyone else experiences this problem, you need to adjust your settings.
Removing the bloatware does not remove any of the phone settings. It just remove the unnecessary software.
Please go back and edit your start post Title to this thread with {fixed} then others can use it for reference. Cheers and well done.

Unlocked Tilt, No MMS

Please note, that I have confirmed that MMS settings are correct, I have done manual entries and Lurche's cab...
However with my new unlocked Tilt, I cannot get my MMS to work. I just get an "Error Synchronizing"
If I put back my SIM card into my old TyTn, I can do a Send/Receive no problem.
Does anyone have any thoughts as to what I can do/test?
Thank you!
...and all of a sudden, I just received an MMS!
I still get an Error Syncing, but it seems to work!
Please disregard!
MMS Help
Mine still doesn't work and I have the same problem as the guy above me. All settings are correct. But whenever I click on send/receive, I get an error synchronizing message. I am able to send but not receive. Help!
Are you using a threaded add on? Have you made any changes (ROM or apps) that would make this happen?
I've just flashed my tilt with Dutty's Dual v4. It also didn't work when I had v3, didn't test it with the stock ATT ROM though. My 8525 used to be able to send and receive without problems.
Since I am not familure with Duty's roms, I dont know what is on them. However, my Tilt, which has the Palm Threaded cab added, gives me the same error. But, even with the errors, my MMS works fine.
Are you able to send and/or receive any MMS?
In the settings for the MMS server, ensure that you are using ATT (or whatever) for the default setting.
I'm not sure about the palm threaded cab... what does it do? I am able to send (I think) but definitely not receive.
Is your user agent set correctly? & if you're AT&T you need the proxy cab.
I'm on tmobile with an unlocked tilt.
I've posted my problems several times before.
I'm on US ATT with a Tilt using Duttys v2. The message says it was successfully sent but the recipient never actually gets the message. Strange part is that I can send to an email address just fine and can send to myself just fine. All of my settings are correct.
I'm on US T-Mobile and I've never had a problem sending or receiving MMS. My only problem was receiving small pics but thats fixed with the wspheader cab. BTW I mustve used 5 diff roms by name and currently using duttys v4. what radio are you using?
To the original poster, I never had to manually enter anything or use any cab to receive any mms. once the configuration is done and soft reset everything should work fine.
To the second person that had the problem i see your using the radio that i had with duttys v3. once i went to v4 i couldnt connect to the internet at all so that might be the problem. try using 1.27.12.11
MMS intermittent several days of effort very frustrating
I have searched hi and low and spent hrs reading posts on all the problems with mms not working on t mobile. My problem seems to be an isolated problem?
I did not get the mms at first so I put in the settings posted. I tried both wap.voicestream and the internet2.voicestream.com... and still the same problem. I then tried the 29.99package cab that was made. and a day later still the same problem.
I have a Tilt with htc dutty rom
the numbers at start up are
r 1.64.06.04
g 25.70.40.02w
d 1.60.00.00
After running the 29.99 cab it seems to be more stable with email accounts and increased the send to 300k but the mms is intermittent.
When I get the message it shows the text box at the bottom of the today screen. If I do not click on it right away when it goes away it never shows up on the message alert icon in the middle of the today screen it also does not show up in the mms area conversation or not(gone forever). Then sometimes maybe 4 hrs later one might all of a sudden load??? and appear even after it attempted to download the first time earlier in the day???
Then sometimes it will download and notify, if I click on it right away I can view the text and pic, once I press close it never shows up in the mms area? Like its gone to the TILT angels to never be seen again??? Then sometimes it downloads and starts a conversation and works normal??? (Very rarely though)
I have tried several settings my internet works with auto or all settings I have tried. Its just the mms receiving. Its hit or miss? Any suggestions I would greatly appreciate. If you need any numbers or other info let me know and much thanks.
godfa7h3r said:
I've posted my problems several times before.
I'm on US ATT with a Tilt using Duttys v2. The message says it was successfully sent but the recipient never actually gets the message. Strange part is that I can send to an email address just fine and can send to myself just fine. All of my settings are correct.
Click to expand...
Click to collapse
for ATT you're most likely missing some registry settings. does dutty's rom have arcsoft cooked in? i have a cab that 100% works with ATT. click the link in my sig and install Arcsoft 5_0_31_16 in my first post or Arcsoft 5_0_31_19 from my second post.
akadonny said:
for ATT you're most likely missing some registry settings. does dutty's rom have arcsoft cooked in? i have a cab that 100% works with ATT. click the link in my sig and install Arcsoft 5_0_31_16 in my first post or Arcsoft 5_0_31_19 from my second post.
Click to expand...
Click to collapse
These cabs do work for picture MMS but not for video MMS unless you have changed something recently. There are very few ROMS with working video MMS on AT&T. Dutty's latest and the Death beta both work for sure. I've flashed to many times lately to remember what others. I should start making a list.
I don't know if your up for changes...but try my new rom under my signature.... MMS is working perfect for AT&T.
If anything, download it, extract it, and look at my MMS settings if you would like. I was having problems sending to Verizon customers until now. Either the network is fixed or my MMS is great! I'm going with the network being fixed.
ryncppr said:
I don't know if your up for changes...but try my new rom under my signature.... MMS is working perfect for AT&T.
If anything, download it, extract it, and look at my MMS settings if you would like. I was having problems sending to Verizon customers until now. Either the network is fixed or my MMS is great! I'm going with the network being fixed.
Click to expand...
Click to collapse
If sending to verizon make sure your message size is under 300k. They can't receive larger. Have you tested video mms on your ROM? Create a message. When you go to add a video, tap and hold the video and select play. If it plays within arcsoft then yours should be working. I haven't gotten the chance to test your ROM yet but I will.
what about using it on T-Mobile?
The problems i stated previously in my earlier post are for T-mobile? Is there other options or suggestions other than the ones I posted? Thanks.
maybe this is related...
I am on at&t, but I think it might apply to t-mobile, who knows.
I used the htc autoconfig for a wm6.1 rom and had several anomalies with my connection settings. I tried a lot to fix them and am still pretty sure I had the settings right. The only thing that fixed it was taking the advice of a poster which I tried to avoid.
The advice was to not use the automatic connection settings but to use a cab to install them instead.
So I hard reset and never looked back.
Point is that you most likely have a setting issue, but I couldn't fix it after autoconfig. I tried deleting the settings and installing the cabs, but still had random issues.
Dutty's hybrid apr 29 worked fine for me.
ryncppr, nice rom
Tmobile and mms issue research dutty dual touch
UPDATE:::
I did a hard reboot and started from scratch ignored the auto network setup. I then tried to install the joe2995 tmobile cab. It would not do anything without already having the settings setup, then it adjusts them. So I then tried to manually set them up and I used tmobile wesite they actually show the tytn 2 phone and settings. And that was where the questions began. I soon learned the settings for MMS was not in the phone where it said, materafact I could not find them at all. I have duttys dual touch and wondered if that was the issue. So I started some intense investigation and found that the settings are only achievable if you setup an email account. The mms server settings only show in the menu of the email account? Is this just a software setup issue? or does it effect the mms because its located in the email area. I dont have the code and do not know what order it was written in so Its only a question. I did more research on the site and found that everyone with duttys dual touch and tmobile posts said they were having this sort of problem. And yet others with duttys other versions were ok. Anyone's insight would be appreciated? I also put the correct settings in the mms server area and still having intermittent mms issues, as posted in previous post. Anyone with duttys dual touch version and tmobile ok with mms and photo send and receive??
No MMS ATT
I have the new gullum throttle diamond rom and was able to send/ receive mms before the flash i installed arcsoft v 4.0.31.28.2 and it restored the multimedia option under messages but i can neither send nor receive even though messeges say sent

NEED HELP w/ MMS !!!

MMS messages won't open/download.
Immediately after receiving a new MMS when I chose to download it tells me right away it is expired and ends up not downloading...
I searched through the settings and everything and don't know what to do...
Pretty desperate...
Thanks in advance!
Are you with ATT? If so, check your proxy or MMS server settings. Happened to me for a short period (2 days) until I realized the server settings had changed by itself.
Also, my experience was that I never could get those MMS. Once they were gone, they were GONE.

Mms Will Not Work ***help**

I have v1.2 sleuth installed on ATT TILT on ATT network......I Uninstalled mms built into rom and installed w.6 palm mms/sms (one cab).....I have not altered network settings however for me to connect to internet i have to disable proxy.
when i try to send MMS it loads to 99% then says delivery failed Error 0x1501
I really would like to use MMS someone please help
Having the same problem and this is after a hard reset and the stock MMS nor the palm threaded with the CAB hack from the ETEN file is working. I've gotta disable proxy to get PIE to work and MMS is not working no matter what. AT&T is tellin me its something they did that changed this...? I will update you as I am on the phone with them right now.
UPDATE: AT&T are getting flooded with calls on the same issues. Does anyone elce wanna give their MMS a try...? Or PIE web browsing with the proxy enabled with the proxy restore tab...?
Good look on the info.....i will be most appreciative of any info u can provide...because i def. do not feel like sitting on the phone with them, as they put me through an endless loop of soft and hard resets.....lol
LOL, Yea, 4 hards already and I lost count of the soft's!!

T-Mobile MMS For ND4SPD Clean Dev 6.1

Install my cab on your Shadow
Restart your phone, After Phone boots setup mms by following these directions.
Edit #2
Uploaded new cab that now includes the New MMSC Settings For T-Mobile. So the following List of instructions are no longer needed if you are on t-mobile. I will leave them here just incase. However all that is needed is to run the cab and reboot and then test out mms by sending a picture message to yourself.
Edit #3
Added some original t-mobile rom settings for large mms pictures and movies.
Not needed for the cab. Instructions here for educational reasons.
Setting up the handset
On the handset press Start.
Scroll to and select Settings. Note: you may need to press More to see the Settings icon.
Scroll to and select Connections.
Scroll to and select GPRS.
Press Menu and select Add.
In the Description: field, enter T-Mo MMS.
Scroll to Connects to: and scroll horizontally to WAP Network.
Scroll to Access point: and enter wap.voicestream.com.
Scroll to User name: and leave the field blank.
Scroll to Password: and leave the field blank.
Press Done twice.
Press Menu and select Advanced.
Scroll to WAP connection: and scroll horizontally to Automatic.
Press Done.
Press the end call button.
Press Start.
Scroll to and select Messaging Settings.
Press Menu and select MMSC Settings.
Press Menu and select New.
In the Name: field, enter T-Mo MMS.
Scroll to MMSC URL: and enter http://216.155.174.84/servlets/mms.
Scroll to WAP gateway: and enter 216.155.165.050.
Scroll to Port: and enter 8080.
Scroll to Connect Via: and scroll horizontally to WAP Network.
Scroll to WAP Version: and scroll horizontally to WAP 2.0.
Press Done.
Highlight T-Mo MMS, press Menu and select Set as Default.
Press the end call button to return to the main screen.
The settings have been applied and are ready for use.
Click to expand...
Click to collapse
shadowmike said:
Install my cab on your Shadow
Restart your phone, After Phone boots setup mms by following these directions.
Click to expand...
Click to collapse
This is great ShadowMike. I was trying to set up mms for long time, and u came with that. Thanks man
Thank ND4SPD He sent me the oem folder I just put it into the cab
shadowmike said:
Thank ND4SPD He sent me the oem folder I just put it into the cab
Click to expand...
Click to collapse
I thank him not once for all that great work he did, but certainly thanks you both guys
Thanks a lot
how to danglowd
thank you lots!!
I want to upgrade to wm6.1!!
how to do??thanks a lot!!
i still cant get or send mms after following your instructions to the dot
I installed the cab and confirmed the settings as shown on the first post. I can send out the pics just under 300k like its supposed to...
but i can't receive any pics?
When i send myself a pic from another phone i see the phone light up for a bit and then nothing..
it supposed to light up then change the icon to E for edge and show me a like inbox icon displaying receiving a MMS but that didn't happen...
anybody have any thoughts?
shadowmike said:
Install my cab on your Shadow
Restart your phone, After Phone boots setup mms by following these directions.
Edit #2
Uploaded new cab that now includes the New MMSC Settings For T-Mobile. So the following List of instructions are no longer needed if you are on t-mobile. I will leave them here just incase. However all that is needed is to run the cab and reboot and then test out mms by sending a picture message to yourself.
Edit #3
Added some original t-mobile rom settings for large mms pictures and movies.
Not needed for the cab. Instructions here for educational reasons.
Click to expand...
Click to collapse
Can you give out what the registry is supposed to look like after your cab is installed?
I still have SampleMMS and no Tmobile MMS and not sure if it makes a difference with my issue.. also most values on send and receive are not at 300k when i look under arcsoft in the registry..
I installed your cab and set up the settings like your post said but I still can't receive mms.
The cab isn't setting up the gprs settings on my phone, am I doing something wrong?
muncheese said:
The cab isn't setting up the gprs settings on my phone, am I doing something wrong?
Click to expand...
Click to collapse
No your not, that is the same issue I am having.. you have to set it up yourself.. with the instructions on the first post..
I haven't been able to receive MMS using that cab but I can send them out up to 300k ...
Yea, ended up doing that.
Likewise, incoming mms aren't coming in. =/
edit: and now I can't send either. oops.
muncheese said:
Yea, ended up doing that.
Likewise, incoming mms aren't coming in. =/
edit: and now I can't send either. oops.
Click to expand...
Click to collapse
install the cab then ensure the GPRS settings are correct.. to test send an MMS to your email.. make a contact title it something like "my email" and put your email and make sure your email is saved as email and not mobile or anything else.. then send a pic to your email. you should be able to send it.. the same would work if you would send it to a differ cell phone..
the only issue here is that the incoming will not work and I'm not sure why..
Turns out it was crappy reception in my shop I can send them. =X
Now it's just the phone mocking me by lighting up when an mms comes in.
muncheese said:
Turns out it was crappy reception in my shop I can send them. =X
Now it's just the phone mocking me by lighting up when an mms comes in.
Click to expand...
Click to collapse
mocking lol yeah mine does this too..
OOPS
shadowmike said:
Install my cab on your Shadow
Restart your phone, After Phone boots setup mms by following these directions.
Edit #2
Uploaded new cab that now includes the New MMSC Settings For T-Mobile. So the following List of instructions are no longer needed if you are on t-mobile. I will leave them here just incase. However all that is needed is to run the cab and reboot and then test out mms by sending a picture message to yourself.
Edit #3
Added some original t-mobile rom settings for large mms pictures and movies.
Not needed for the cab. Instructions here for educational reasons.
Click to expand...
Click to collapse
I instaled the cab and now my MMS is gone.?
I have HTC Juno/Phoebus WM6.1 Clean Developer Edition and have no problems with small images when I receive a picture it is the same size mms and email I made my on mms files with ND4SPD from the oem folder but I tried
shadowmikes new cab and it still works looking at the connects settings I see some differences then my phone here is what I have and the other thing I did is set up windows live on the slide by going in to the reg. and going to
hklm\security\chome\defaultsettings\cwindowslive disabled value 0
hklm\software\microsoft\chome\cwindowslive disabled value 0
now just set it up if this don't help post back i would like to see a fix for this
On the handset press Start.
Scroll to and select Settings. Note: you may need to press More to see the Settings icon.
Scroll to and select Connections.
Scroll to and select GPRS.
Press Menu and select Add.
In the Description: field, enter T-Mobile MMS.
Scroll to Connects to: and scroll horizontally to T-Mobile MMS.
Scroll to Access point: and enter wap.voicestream.com.
Scroll to User name: and leave the field blank.
Scroll to Password: and leave the field blank.
Press Done twice.
Press Menu and select Advanced.
Scroll to WAP connection: and scroll horizontally to Automatic.
Press Done.
Press the end call button.
Press Start.
Scroll to and select Message options.
Press Menu and select MMSC Settings.
Press Menu and select New.
In the Name: field, enter T-Mobile MMS.
Scroll to MMSC URL: and enter http://216.155.174.84/servlets/mms.
Scroll to WAP gateway: and enter 216.155.165.050.
Scroll to Port: and enter 8080.
Scroll to Connect Via: and scroll horizontally to WAP Network.
Scroll to WAP Version: and scroll horizontally to WAP 2.0.
Press Done.
Highlight T-Mobile MMS, press Menu and select Set as Default.
Press the end call button to return to the main screen.
kron2 said:
Scroll to Connects to: and scroll horizontally to T-Mobile MMS.
Click to expand...
Click to collapse
I just did a clean install of the ROM and went ahead and installed the suggested cab..when I got to this step there was no option to select Tmobile MMS??? I thought the default option to select was WAP? in any case it didnt' work
also when you install the mms cab it already puts a t mobile mms settings in the message options..but its flawed because it doesn't let you edit or delete it. you have to select it as default or create a new mms settings under different name and set that to default. i did that with your suggestioned and created new settings with differ name. Event editing the suggested settings from the cab doesn't work because it forces you to save new name and it keeps the same old settings.
I reinstalled shadowmoikes mms cab and tried it with out wifi and had no internet so I had to uninstall it and had internet did you louse it to there has to be a resin my mms works with images the other thing I did is use network wizard but it will set the data to wap. a long with mms
kron2 said:
I reinstalled shadowmoikes mms cab and tried it with out wifi and had no internet so I had to uninstall it and had internet did you louse it to there has to be a resin my mms works with images the other thing I did is use network wizard but it will set the data to wap. a long with mms
Click to expand...
Click to collapse
well the only thing I can get working with it is sending pics out and upon receiving my phone lights up for few seconds and then the light dims back down.. when it lights up the bars do not change to E like it is supposed to to connect to receive the pic.
Do you have the network wizard cab? do you mind posting it here? I have one from another thread but upon instillation no icons show up...
I sincerely appreciate you helping me out.

Categories

Resources