Related
Hi All, Thank You for such an informative and helpful forum.
Does anyone know if there is a case available for the Ameo that incorporates a belt clip?
Many Thanks
Tim
I think you won't put that device unto your belt. Coz it will heavy and to big
I would rather have it on a belt clip than get it squashed in my pocket
Check out the PDAir case, I've seen it on ebay. It has a belt clip.
But I think it has no belt clip
You can see the case on: http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000092&products_id=5551
Both these ebay auctions for the PDair case mention a removable belt clip.
http://cgi.ebay.co.uk/PDair-Leather...ryZ48673QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.co.uk/PDair-Leather...ryZ31521QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Pantaloonie said:
Both these ebay auctions for the PDair case mention a removable belt clip.
http://cgi.ebay.co.uk/PDair-Leather...ryZ48673QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.co.uk/PDair-Leather...ryZ31521QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
Maybe am getting blind because I did not see mention of BELT CLIP
Now I'm confused... Are you saying you STILL can't see any mention of a belt clip?
Thanks Pantaloonie, the second link clearly states 360 belt clip.
Cheers Tim
Pantaloonie said:
Now I'm confused... Are you saying you STILL can't see any mention of a belt clip?
Click to expand...
Click to collapse
Sorry! I was very tired yesterday I just ordered one
victoradjei said:
I just ordered one
Click to expand...
Click to collapse
Me too. The Ameo is costing me a fortune... 4gb Mini SD, leather case, spare battery, 4 in 1 USB cable.... and the docking cradle will be £70 when Expansys get them in stock.
Sigh.
Well the PDair case arrived, it smells lovely, but no belt clip
Pantaloonie said:
Well the PDair case arrived, it smells lovely, but no belt clip
Click to expand...
Click to collapse
Can anyone confirm that a case with a belt clip exists for the Ameo/Advantage/U1000?
Many Thanks
Tim
TigerTim36 said:
Can anyone confirm that a case with a belt clip exists for the Ameo/Advantage/U1000?
Many Thanks
Tim
Click to expand...
Click to collapse
I wish I could. I've been looking, but they just don't seem to exist, yet. I do hope when one is made, it is made WELL, because I sure would hate for it to fall off of me, which I've had happen with previous phones from time to time. If I find something, Ill definetaly post it here.
I been searching for a belt pouch for my new toy like all you guys, going through all the IT mails, phone accessories shop, shopping mail, backpacks, shoulder bags, sling bags, waist pouch etc and NO luck.
Been trying, taking in & out my phone, and ..... XXXX I droped it on the floor, not too high, but got 2 very small dents by the both sides ....
Finally found this camera shop that carries Lowepro brand, and got lots of camera bag/pouch that able to fit, went throught lots, minus out the zipper kind(hard to access & might scratch the unit), minus out hoz design (too wide), minus out colorful one (not professional look), minus out those bulky one, shortlisted 2 model that fit Dopod U1000 well (top load vertical design), velcro flap, both black and professional enough to wear with pants (i think ?)
U1000 size, 9.5 x 2.2 x 13.4 cm
D-Pods 50, size (Interior): 8.5 x 5.5 x 14 cm, stretch fabric, snug fit, hard to take out as the width is a bit tight (stretched), I like this coz the material (got protection), http://www.lowepro.com/Products/Camera_Pou.../D-Pods_50.aspx
SlipLock™ Pouch 20, size (Interior): 9 x 4.5 x 14 cm, this fit nicely, easy to take out, but less protection, http://www.lowepro.com/Products/Accessorie...M_Pouch_20.aspx
Both of them got space to put your BT or wallet, but the SlipLock™ Pouch 20 is thiner, so finally bought the SlipLock™ Pouch 20, retails S$30, but can get cheaper.
Cheapest holder for Dopod U1000
I have found the cheapest holder to hold/carry the Dopod U1000. Went to a seminar recently, and as usual, they will give out badges & landyard for the registered guest.
Guess what, it fit the Dopod tightly and nicely, can even click on the screen with the plastic cover.
You can find such landyard with holder in most stationery shop
johnnykok said:
SlipLock™ Pouch 20 is thiner, so finally bought the SlipLock™ Pouch 20, retails S$30, but can get cheaper.
Click to expand...
Click to collapse
I had a look at this one but I don't think it has a belt loop??
Can you confirm that it has?
Thanks
Tim
Yes, it have a belt loop with double velcro. I paid only USD$10
I use an original case for the T-Mobile 6315. It's old PDA that I used to have.
Similar cases for the 6315 fit the HTC Advantage
http://www.gomadic.com/t-mobile-ipaq-h6315-h-6315-case-leather-belt-loop-swivel-clip-holder-k.html
You might search for Ipaq 6315 cases
Thank You Both for your help.... The Ipaq case is exactly what I'm looking for...can you please confirm that the Advantage fits correctly/neatly into it?
Thanks
Tim
http://www.calculatorsource.com/tp-pda.html
It looks like it might work given the fact they will custom build it..
The longer flap also has a piece of plastic inside to help protect the screen.
Looking for some feed back. I may order one to give it a shot..
Thanks Kevin
Looks like it would work well, and has the right price (if you don't want leather).
Ok..I ordered one in a horizontal layout with a belt clip. I will take some pictures and post them when I get it. About 2 weeks.....
hs1333a said:
Ok..I ordered one in a horizontal layout with a belt clip. I will take some pictures and post them when I get it. About 2 weeks.....
Click to expand...
Click to collapse
Hs1333a, has it arrived? Looking forward to your picture
edit: could'nt wait, so have gone ahead to place my order too.
Not yet...They told me it shipped from the mfg on or about 1/16 so it should be here any day. I will get some pics up as soon as I get it...Hopefully it's well made and practical..fingers crossed.
Thanks Kevin
Ok...I just got the case and it's made very well. The only thing that wasn't done to my spec was that I asked for a metal spring clip for my belt instead of the belt loop. I have a call into the mfg about correcting this. I went with the dimensions of 5 1/4" x 3 7/8" x 5/8" Horizontal Layout and that allows enough room to have the keyboard attached as well. I'm going to see about having one made up using a smaller thickness of about 3/8" this should make for a nice snug fit for just the device. Any questions give a shout..
If anyone is interested I would go through the mfg directly.
The Pouch Inc
www.thepouchinc.com
1-800-727-6824
Just an update..The Mfg called back and they were very polite and helpful. Because of the mishap with the belt clip they are going to send me another case. I changed the 5/8" to 3/8" on this one to get a tighter fit. I never expect anything for free and since I'm changing the original dimensions they are only charging me half price for the new unit, which I feel is fair.
New case with belt clip
I just received the updated case with the belt clip and smaller width(thickness). The unit fits in nice and snug. The material they use stretches so it keeps everything in place. The case is pretty nice and very well made.
Thanks Kevin
Did you order the thin case with a hard flap to protect the screen from impact damage when not connected to the keyboard?
I like the spring clip, but without any covering I've always found that they really scratch up the belt after using it for awhile. Is the other option the belt / clip web strap?
Can you post a picture of the bigger case with the complete device with keyboard attached. I'd like to see how bulky it looks.
Thanks
hitch said:
Did you order the thin case with a hard flap to protect the screen from impact damage when not connected to the keyboard?
I like the spring clip, but without any covering I've always found that they really scratch up the belt after using it for awhile. Is the other option the belt / clip web strap?
Can you post a picture of the bigger case with the complete device with keyboard attached. I'd like to see how bulky it looks.
Thanks
Click to expand...
Click to collapse
Here's a couple of comparisons of the two cases. The tinner one also has the flap with the plastic on the inside to help protect the screen. The bigger case has the belt loop and I believe the other clip is a locking buckle(see pic).
All in All I like the unit without the keyboard and it fits great in the thinner case...
The picture 2nd from left on above post is the unit with keyboard in the larger case
Just an idea, and very unlikely that a product like this ever existed... but who else would like to be able to have their i8000's (or i920 ) have a stylus slot? I've seen custom back covers for larger batteries on eBay, so why not one for a stylus?
I would also like a kick-stand on the back cover like the one for the htc HD2 back cover.
Verizon i920 already has a stylus slot.
on my i900 i had a cover with a built-in stylus, got from the internet
xfox said:
on my i900 i had a cover with a built-in stylus, got from the internet
Click to expand...
Click to collapse
Hey, can you posted the link?
Thanks.
for person looking for kickstand-body glove makes a case that has a kick stand on the belt clip. think you can buy the kickstand belt clip separately from the case also-in case you prefer different case. I just got case -rubberized plastic with belt clip(no kickstand)--from ebay-paw avenue was name of store- for 8.95 including shipping. the body glove case/clip is $20. go to body glove to check it out. I may try to get the belt clip to see if works with my case cause I like idea of kickstand too.
I like your idea - had the exact some one today. For my needs would have to be a slot, though, could just be some sort of ring-shaped holder.
Combine it with a kickstand and all is hunky dory.
I like your idea - had the exact some one today. For my needs would have to be a slot, though, could just be some sort of ring-shaped holder.
Combine it with a kickstand and all is hunky dory.
To protect the device I got a silicon plastic cover and screen protector from caPDAse. Fit is absolutely OK. Happy with it so far - just a couple of days.
hi, does the body glove make it for both i8000 and i920 versions?
Hi all!
I think the best way do solve this problem is find a slim stylus with a strap
spigui said:
Hey, can you posted the link?
Thanks.
Click to expand...
Click to collapse
I use this: hxxp://shop.brando.com/samsung-i900-omnia-rubberized-back-hard-case_p03205c0304d004.html
and I am very satisfied!
I know the title sounds weird but it's exactly what I'm looking for. Right now I have THIS Case. But when I take the phone out of the case on my belt it is no longer protected from drops.
What I am looking for is a belt case similar to the one above that will hold a TMOUS HD2 WITH a hard cover or silicon cover.
Anyone seen anything like this???
your link no worky
Fixed, doesn't really matter what case I have now though. I'm basically looking for a hip case that will hold my HD2 WITH a hard case on it.
Solved...
I am ordering a hip holster for a PPC-6600 which is .10" x .12" x .30" larger than the TMOUS HD2. This should allow me to attach my hard cover to the HD2 and fit it in the hip holster.
Check my post here. http://forum.xda-developers.com/showpost.php?p=6461687&postcount=125
i recentaly switched my wife to my TP2 and got the HD2 and i found a leather case for 5 dollars at the local flea market and it lets me use the silicone case and the body glove case "i switch out cases depending on if im going to be in the office or out on site" and both will slide in the leather case so the phones always protected ...if you realy need this set up im sure i can pick up another case and send it to you
Tech5
Fingerlickin said:
I know the title sounds weird but it's exactly what I'm looking for. Right now I have THIS Case. But when I take the phone out of the case on my belt it is no longer protected from drops.
What I am looking for is a belt case similar to the one above that will hold a TMOUS HD2 WITH a hard cover or silicon cover.
Anyone seen anything like this???
Click to expand...
Click to collapse
Not sure if I'm too late to reply, but I have the Body Glove Dual Protector Case and just bought RocketFish Universal Leather Case RF-WR337...perfect fit!
Here is a link from another post with some pics of the case:
http://forum.xda-developers.com/showthread.php?t=654013&page=4
I hope this helps.
Otterbox
I have the otterbox defender case with belt clip....the best case on the market
Humongus1 said:
I have the otterbox defender case with belt clip....the best case on the market
Click to expand...
Click to collapse
Old thread guy...
I use this TPU case
and put it inside this case
Snug fit at the beginning, but overtime it gets better.
I see that Otterbox has a hard plastic belt clip holster for the 'Defender' but they don't make one for the 'Commuter'. Do any of you know what clips/holsters will fit an HD2 wearing an Otterbox 'Commuter' case?
Hi, i think you can't find a hard plastic belt clip holster like the "Defender" , because when i bought mine, it was stipulated that' s only for "defender":
Go to the otterbox site, and when you compare the two covers, there're not same.
On mine, i've three parts, with a front cover and a rear cover, and here you can see anchors of the holster.
The third around two others.
"Commuter" and "defender" are two different covers.
Hope i help you
I understand there is no Otterbox 'commuter' holster. I am trying to find out if another brand will work with the commuter case.
I've understand you're request, i just tell you that don't exist, due to the fixation.
Otterbox customer service informs me differently. Maybe you can't find such a holster in France, but they obviously exist in the US.
Sorry I did not know, but I am curious to know how they hold the phone in the holster.it's probably not the same like "defender"