Hi,
Is it possible to upgrade my Qtek 9100 without using an USB cable but a SD card. The reason is that my mini USB connection on the Qtek is broken. So I can't connect the Qtek with my computer.
If it is possible to upgrade with a SD card can anybody tell me how.
I havn't heard of doing it this way in a while. My old T-Mobile Pocket PC Phone Edition. "Space Needle" used to be flashed this way. You would load the Rom onto the SD card and use some type of key combination at boot to load the rom... I'm not sure that it exists with this rom and hardware...
can be done, I do it on my spare wizard that also as a broken usb socket, however you must first have a memorycard with a rom image first.
ratcom said:
can be done, I do it on my spare wizard that also as a broken usb socket, however you must first have a memorycard with a rom image first.
Click to expand...
Click to collapse
Is it possible to make a rom image on a SDcard out of the the ROM's availiable om this forum? And how can this be done.
ratcom said:
can be done, I do it on my spare wizard that also as a broken usb socket, however you must first have a memorycard with a rom image first.
Click to expand...
Click to collapse
would you please tell breifly how can we have rom image on sdcard ????
To restore from an SD image, your wizard has to be CID unlocked first or else it won't update.
yes i have cid unlocked imate kjam
clemsyn said:
To restore from an SD image, your wizard has to be CID unlocked first or else it won't update.
Click to expand...
Click to collapse
I have CID unlocked my phone so that's no problem. But how do I upgrade with a SDcard and how to make an image on a SD card.
Who can help.
put your phone in bootloader mode (make sure you have minisd in the slot)...disable activesync on your computer by stopping wcecomm process...then plug in the phone (while it's in bootloader)..then run romupdate_115.exe (look for it in the xda ftp). Then choose the usb connection (I think it's wcusb or something)..press enter..cmd> should appear...then type r2sd all (this will backup everything in the phone to the minisdwhen it completes).
Then when you put it in the phone you want to upgrade..put that minisd in the phone you want to upgrade and put that phone in bootloader. It will ask you if you want to update and press the voice command button to upgrade. Goodluck!
Can I make an image of a romupdate availiable in the xda ftp on a SDcard and upgrade my phone without connecting it to the computer.
sanderjohan said:
Can I make an image of a romupdate availiable in the xda ftp on a SDcard and upgrade my phone without connecting it to the computer.
Click to expand...
Click to collapse
Not as far as I know my friend ..... sorry
sanderjohan said:
Can I make an image of a romupdate availiable in the xda ftp on a SDcard and upgrade my phone without connecting it to the computer.
Click to expand...
Click to collapse
If needed, PM Me and you can send me a MiniSD card to load a rom onto for you. and I'll ship it back. Let me know which rom you want loaded, and I will do it for you.
Actually somebody with an CID unlocked wizard can create an SD image and then upload it to the website for you to upload and use but it will definitely wipe out the data on their SD.
I'm in the same boat. My miniUSB port fell in. I need to get the t-mobile ROM back onto the phone so I have a chance of repair. If anyone could upload a ROM onto the forum that will let me update using a miniSD card I’d be very grateful.
At least I’m not the only one who's USB port has broke!
I have teh stock tmo ROM on a 128 MB miniSD. Doubt that would help, but if someone needs it...just tell me how to get the image off and I'll post it.
bittermormon said:
I have teh stock tmo ROM on a 128 MB miniSD. Doubt that would help, but if someone needs it...just tell me how to get the image off and I'll post it.
Click to expand...
Click to collapse
Assuming /dev/sda is the device pointing to your SD card reader, and /tmp/sd.img is the sd card image file, in Linux you can extract it with this command:
Code:
dd if=/dev/sda of=/tmp/sd.img
And you can write it back on another SD card with this command:
Code:
dd if=/tmp/sd.img of=/dev/sda
in Windows you can use psdread.exe and psdwrite.exe, see the wiki for instructions:
http://wiki.xda-developers.com/index.php?pagename=XdaUtils/psdread.exe
http://wiki.xda-developers.com/index.php?pagename=XdaUtils/psdwrite.exe
If anyone makes an Original SD ROM of tmobile...Please upload it at ftp. It would help lots of people here in the forum..
Upload of stock TMobile Rom to SD card
bittermormon said:
I have teh stock tmo ROM on a 128 MB miniSD. Doubt that would help, but if someone needs it...just tell me how to get the image off and I'll post it.
Click to expand...
Click to collapse
I looked on the FTP and did not see this, so if anyone has it let me know. My mini USB fell in as well seems to happen alot. I have 7 days..... (Sounds like The Ring)
peraltah said:
I looked on the FTP and did not see this, so if anyone has it let me know. My mini USB fell in as well seems to happen alot. I have 7 days..... (Sounds like The Ring)
Click to expand...
Click to collapse
My file isn't from teh FTP, its from my phone. I made a b/u before I installed X's rom on day 3 of my MDA ownership. Like I said, I think there's a way to pull the image off the card, but I'm not going to spend my time looking. If some one wants to find me instructions as well as links to programs needed, I'd be glad to post the image.
Restoring Tmobile USA Rom from SD card
Thats for all the info folks it worked perfectly and I will not have to cough up any money for me voiding the warrenty!!
Related
Hope you guys can help me out. I disassembled my Cingular 8125 to try and improve the earpiece speaker. I put the device back together and turned it on and it sticks on the boot screen.
When I try to do a hard reset, I get to the point where I have to press send (green button), but then displays the following for a second and then goes back and freezes on the boot loader screen:
format FAT partition
format is complete
I've read some stuff about being able to recover from this using the SD card, but I'm not sure how to do it. If it is possible to recover from SD card, can someone please upload the appropriate files to the ftp site?
Please HELP!!! My ROM versions are below:
IPL: 2.16
SPL: 2.16
GSM: 02.07.10
OS: 2.16.9.1
Thanks!!!
Update:
I'm able to get to the mutli-colored screen by holding the Camera Button prior to starting the Wizard back on. I plug in my USB to my computer, but my computer says "USB Device Not Recognized". How can I get a new ROM on to my device? I tried running the ROMUpdateUtility.exe from a ROM, but it obviously wouldn't work because my computer doesn't see my phone. Please help!!
Thanks!!
Update #2:
When connected to the computer, I got to device manager and see an unknown device under USB. I uninstall the device and do a scan for hardware changes. This finds the phone, but it still shows up as an unknown device. It does say that device is ready to use, but when i try to run the ROM update utility, it still cannot find my phone.
Do I need special USB drivers for the phone to be recognized?
Please guys, any help would be greatly appreciated!
Thanks!!!
you shouldnt need any special driver for your computer to connect to Wizard.
did you install ActiveSync at all ? perhaps its using the driver from that installation....
What OS are you using ?
Yes, I've previously installed ActiveSync 4.1. I am using Windows XP. Would it help to try to uninstall/reinstall ActiveSync? I may give that a try. Will keep you posted. Any other suggestions?
EDIT:
Just tried to uninstall/reinstall ActiveSync and it still says USB device not recognized
it looks like a dead ROM, hope it has nothing to do with the hardware.
Anyway, you try looking through this forum, there are some people who've got stuck on the boot screen, and did a flash (via the bootloader screen, e.g. the multi colour one) on the ROM and seems to fix the problem. Probably you want to put this option last. Mean while, wait for others to repsond, and you may well start looking on how to flash the ROM from bootloader screen.
hanmin said:
it looks like a dead ROM, hope it has nothing to do with the hardware.
Anyway, you try looking through this forum, there are some people who've got stuck on the boot screen, and did a flash (via the bootloader screen, e.g. the multi colour one) on the ROM and seems to fix the problem. Probably you want to put this option last. Mean while, wait for others to repsond, and you may well start looking on how to flash the ROM from bootloader screen.
Click to expand...
Click to collapse
Thanks for responding. I'm ok with having to reflash, but the problem is that my computer doesn't seem to recognize my device when i'm at the multi color screen.
Isn't there a backup battery in these devices? I had my Wizard disassembled for 4 hours. I guess the backup battery could have died during this span, but even if it did, what implications would that have?
You still have hope
Get it to the bootloader screen. Connect via USB to your PC (make sure you have active sycn installed) and run an RUU to replace your ROM. I had to do this after trying to downgrade to the original Cingular ROM on my 8125. Scared the S*!T out of me when it hung on the Splash screen and wouldn't load. I thought it was toast but using the Bootloader and an RUU it put it back to normal again.
It won't look like the PC is recognizing the device but it will as long as its in Bootloader.
Let us know if you get it fixed.
Re: You still have hope
hellomoto_25 said:
Get it to the bootloader screen. Connect via USB to your PC (make sure you have active sycn installed) and run an RUU to replace your ROM. I had to do this after trying to downgrade to the original Cingular ROM on my 8125. Scared the S*!T out of me when it hung on the Splash screen and wouldn't load. I thought it was toast but using the Bootloader and an RUU it put it back to normal again.
It won't look like the PC is recognizing the device but it will as long as its in Bootloader.
Let us know if you get it fixed.
Click to expand...
Click to collapse
Thanks for the reply. The problem is that when I plug the device into my computer, I get a USB device not recognized error. I try to proceed with ROMUpdateUtility.exe anyways, and get this error:
"The update utility cannot connect to your PDA phone..."
Seems like updating via USB is not going to work for me. Can I write a backup to the SD card from the PC, put the SD card in the phone, and then boot from there? I've read some posts along these lines, but detailed steps would be very helpful. THANKS!!!
You need an SD card dump image.
This is NOT a file in the sense of a file on the SD card. Its a RAW image. You need someone who has dumped their firmware in that fashion to send you the SD image.
You then write it onto the SD card using something like "psdwrite" (which will, by the way, DESTROY the filesystem on the SD card - don't have anything on there you care about!) and then insert it into the phone with the power off. Hold the CAMERA button and turn it on; when it asks if you want to restore the image, hit VOICE.
Note that for 1.x IPLs/SPLs the backlight will be OFF during this procedure, so you have to pay attention and/or have a good flashlight handy.
Genesis3 said:
You need an SD card dump image.
This is NOT a file in the sense of a file on the SD card. Its a RAW image. You need someone who has dumped their firmware in that fashion to send you the SD image.
You then write it onto the SD card using something like "psdwrite" (which will, by the way, DESTROY the filesystem on the SD card - don't have anything on there you care about!) and then insert it into the phone with the power off. Hold the CAMERA button and turn it on; when it asks if you want to restore the image, hit VOICE.
Note that for 1.x IPLs/SPLs the backlight will be OFF during this procedure, so you have to pay attention and/or have a good flashlight handy.
Click to expand...
Click to collapse
Genesis3,
Thanks for your wonderful insight. I really appreciate your help.
Now can someone help me with getting an SD image? What constitutes an image file? Is it simply the .nbf file? Do I just use psdwrite and copy the nbf file onto the card? Is there something on the FTP site I can use? My configuration as mentioned in the original post is:
IPL: 2.16
SPL: 2.16
GSM: 02.07.10
OS: 2.16.9.1
I had a similar problem and reflashing the rom using the usb is possible. Don't use a flasing utility, though.
Find a self contained rom upgrade from the FTP. As long as you see USB on the bottom left side of your screen, it should work. After that, reflash with whatever rom you want. Hope it works. Nothing worse than an the feeling you have holding an expensive paper waight.
wireless_one said:
I had a similar problem and reflashing the rom using the usb is possible. Don't use a flasing utility, though.
Find a self contained rom upgrade from the FTP. As long as you see USB on the bottom left side of your screen, it should work. After that, reflash with whatever rom you want. Hope it works. Nothing worse than an the feeling you have holding an expensive paper waight.
Click to expand...
Click to collapse
Thanks for the reply. I'm not sure what you mean by "self contained rom". In the past, I've used K-JAM_WWE_216901_2169101_020710_ship.zip from the FTP site, and ran the ROMUpdateUtility.exe without any problem. Now, since I cannot make a connection to the computer via USB, I am unable to run ROMUpdateUtility.exe. Is there an alternative "self contained" file I can use that will work in spite of the unknown USB device message?
Thanks in advance...
try to DL this file: RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe. Its on the FTP. Follow this link:
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
click on the FTP Root link, navigate here:
ftp://ftp.xda-developers.com/Wizard/Roms/Qtek/ and download the file. Put the phone in bootloader, attach to PC (make sure the phone has USB shown in the bottom left corner, and run the file.
Ignore any references to ActiveSync or any connections period. Just run it all the way through the installation process. When all is done, you can upgrade, down grade, etc using the appropriate method (I use aWizard) Let me know if this helps.
Wireless One
wireless_one said:
try to DL this file: RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe. Its on the FTP. Follow this link:
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
click on the FTP Root link, navigate here:
ftp://ftp.xda-developers.com/Wizard/Roms/Qtek/ and download the file. Put the phone in bootloader, attach to PC (make sure the phone has USB shown in the bottom left corner, and run the file.
Ignore any references to ActiveSync or any connections period. Just run it all the way through the installation process. When all is done, you can upgrade, down grade, etc using the appropriate method (I use aWizard) Let me know if this helps.
Wireless One
Click to expand...
Click to collapse
Thanks for your reply. I've tried the course of action that you've suggested, but i cannot get through the installation process because of inadequate connectivity between the phone and my PC. I see the USB in the bottom left hand corner, plug into the PC, and immediately see a USB Unknown device error. I ignore that and try to run the ROM anyways and it fails and I get an Update Error:
"The Update Utility cannot connect to your PDA Phone. Please check that your USB/cradle is connected..."
That's why I think I got to go the SD card route, so anyone with an image file that i can put on my SD card, I really could use the help!
It is NOT a NBF file.
The problem with the 8125 is that if you are somehow not CID unlocked the wrong SD image will actually hurt you more than it helps.
You need to find someone with a Cingular 8125 SD image - I have one for the T-Mobile MDA but not for the Cingular "as-shipped" ROM.
Genesis3 said:
It is NOT a NBF file.
The problem with the 8125 is that if you are somehow not CID unlocked the wrong SD image will actually hurt you more than it helps.
You need to find someone with a Cingular 8125 SD image - I have one for the T-Mobile MDA but not for the Cingular "as-shipped" ROM.
Click to expand...
Click to collapse
Genesis3,
Thanks for confirming it's not a NBF file. I had previously CID unlocked using awizard and then installed a newer IMATE ROM:
IPL: 2.16
SPL: 2.16
GSM: 02.07.10
OS: 2.16.9.1
I did not install the IMATE Extended ROM or Cingular customizations after upgrading to the IMATE ROM. Do I still need a Cingular 8125 SD image, since i've already upgraded my ROM, or do I now need an IMATE SD image to match my current configuration? Or does the type of image file really not matter?
Thanks in advance!
I really hate to beg, but I am desparately seeking an SD image file backup. I'm going out of town in a couple of days, and would love to have a working wizard for my trip.
Can any one of you kind souls please upload your SD image file backup to the FTP site? It really is my last ditch effort before having to send the phone back.
I truly appreciate all the help and all the responses I have received to date.
THANKS!!!
sunil23 said:
I really hate to beg, but I am desparately seeking an SD image file backup. I'm going out of town in a couple of days, and would love to have a working wizard for my trip.
Can any one of you kind souls please upload your SD image file backup to the FTP site? It really is my last ditch effort before having to send the phone back.
I truly appreciate all the help and all the responses I have received to date.
THANKS!!!
Click to expand...
Click to collapse
Sunil,
i apologize for not responding your PM sooner but wasnt available due to travel plans.
I am trying to upload the files to the Upload folder now and i iwll let you know when i am done.
Thanks
getting permission denied when i tried to upload the documents.
is there another password i should be using besides xda/xda ?
Good Afternoon,
First i'd like to thank everyone for the great forum we built.
Don't know if anyone explained this before, but i was unable to find.
I've always been able to flash new roms. I've got SPL 1.07.ds. Last Rom I flashed was Finix'n'over 's Ultra Light.
Today, while trying to flash a new rom, i pressed ROMUpdateUtility.exe, as usual, everything seemed ok, but when into spl i just get serial port (not USB port) and PC just can't find the device. Anyone, plz?
Thanks in advance.
pjvieira said:
Good Afternoon,
First i'd like to thank everyone for the great forum we built.
Don't know if anyone explained this before, but i was unable to find.
I've always been able to flash new roms. I've got SPL 1.07.ds. Last Rom I flashed was Finix'n'over 's Ultra Light.
Today, while trying to flash a new rom, i pressed ROMUpdateUtility.exe, as usual, everything seemed ok, but when into spl i just get serial port (not USB port) and PC just can't find the device. Anyone, plz?
Thanks in advance.
Click to expand...
Click to collapse
You could either use the Flash from SD method, or use this Flash Utility attached. Unzip, then copy your RUU_Signed.nbh file to this folder and flash. I apologize, I don't know whose this is, but it works for me every time. I hope it works for you...
thanks for your fast reply.
Will try it as soon as i get home.
Was afraid i might had brick it.
pjvieira said:
thanks for your fast reply.
Will try it as soon as i get home.
Was afraid i might had brick it.
Click to expand...
Click to collapse
I think now days, there are so many work arounds, that it's pretty hard to end up with a permanant brick.
If what I sent does not work, reply back and let us know. I'm sure someone will get it going again.
Update: If it still does not flash using the above method, then try the SD method. Make sure you have an SD Card in your Trinity and that it is NOT an SDHC Card. Be sure it's formatted FAT32 and has NO NAME. Unzip the included attachment, and copy the SSPL.exe to your SD Card's Root Directory. Then rename the RUU_Signed.nbh file from the ROM of your choice to TRINIMG.nbh, and copy it to the Root Directory of your SD Card.
Go to the File Explorer, and browse to the SD Card Root Directory and run the SSPL.exe file. This should initiate the Flash Process. Again, good luck.
On rare occasion, I've not been able to flash any cooked ROM. In this case, flash back the OEM ROM originally installed on your Trinity. After this flash, it will work again with cooked ROMs.
Thanks for your help. None of the methods above seem to work.
How do i flash the original ROM if i cannot flash the TRIN?
Files needed for OEM ROM SD Card Flash
pjvieira said:
Thanks for your help. None of the methods above seem to work.
How do i flash the original ROM if i cannot flash the TRIN?
Click to expand...
Click to collapse
So the SD Method did not work either? Strange, try flashing the OEM, but for that purpose, I always use the SD Card method. So far, it's always worked.
Pull the RUU_Signed.nbh from the OEM ROM and rename it to TRINIMG.nbh, (I've done this step in the Linked zip file) Copy it to your SD Card and try that method... This will flash back your radio also, so you will need to update it again if you've changed it.
For my phone, I use this ROM:
This is the Full ROM - - My Mirror of Full ROM
Click Here for the needed files
Yours might need something else, but this works for me.
Thanks man!!! SD Flash works...
after you repeat the name in second post, i realise what i've done wrong...
TRINIMB.nbh -> On your first post about it, you wrote a "B". No big deal
Thanks a lot for your time!!!
pjvieira said:
Thanks man!!! SD Flash works...
after you repeat the name in second post, i realise what i've done wrong...
TRINIMB.nbh -> On your first post about it, you wrote a "B". No big deal
Thanks a lot for your time!!!
Click to expand...
Click to collapse
Oops! I'm VERY sorry about that. I try to watch my spelling, but I missed it.
Glad it works now!
Reverted back to original ROM. Doesn't change to USB either but forget it... i can always flash it from SD Card...
Thanks again...
pjvieira said:
Reverted back to original ROM. Doesn't change to USB either but forget it... i can always flash it from SD Card...
Thanks again...
Click to expand...
Click to collapse
Are you able to use the USB for Sync and data transfer? Wondering if it could be a bad USB Port on your Trinity. Or cable?
May i have a question?
I flash my PDA with micro sd with adapter.
Is it possible?
Thanks SuperSport!!! You rule... My stupidity got me to this state :S i recall one night, i missed the hole to softreset with stylus.... probably i caught the usb pin, which moved to the top of other pin...
Don't Know how ActiveSync continued detecting device.... got the pin into its correct position... Everything ok now! Thanks a lot for your patience and time man!!!
rubbish.guy said:
May i have a question?
I flash my PDA with micro sd with adapter.
Is it possible?
Click to expand...
Click to collapse
I have done it with an adapter, as long as it's NOT an SDHC card. My 2GB Micro SD in a Mini SD Adapter worked fine. Just be sure to follow the above instructions.
pjvieira said:
Thanks SuperSport!!! You rule... My stupidity got me to this state :S i recall one night, i missed the hole to softreset with stylus.... probably i caught the usb pin, which moved to the top of other pin...
Don't Know how ActiveSync continued detecting device.... got the pin into its correct position... Everything ok now! Thanks a lot for your patience and time man!!!
Click to expand...
Click to collapse
You are VERY welcome. Obviously you are not too stupid. I'm not sure others would have thought to look into the port for the bent pin. Good Work!
Hi guys,
want to flash my Wizard from SD-card, but i don't know how to rename thr nbh file. Whats name i have to use and how i have to start the rgu bootloader on the device?
thx for help
Hi, not sure you'll be able to flash a new rom from SD card, unless you have the rom on another wizard. If so you can copy rom from other wizard onto SD card and transfer onto your wizard. Make sure you backup data on SD card because as soon as you load the rom image onto the card it becomes unreadable on pc. Which rom are you trying to load? hope this is of some help
MvSt said:
Hi guys,
want to flash my Wizard from SD-card, but i don't know how to rename thr nbh file. Whats name i have to use and how i have to start the rgu bootloader on the device?
thx for help
Click to expand...
Click to collapse
Unfortunately renaming the nk.nbf doesn’t work with the Wizard.
I discussed how you can make an SD image for backup and uploading “here in this thread”.
Rom flash from sd
ROM flash from SD/MMC: Without needing 2nd device
here is link
http://forum.xda-developers.com/showthread.php?t=393370
go for it
My Wizard 200 is also Dead after downgrading version 2 to 1
so now it is totaly dead ..even not go in bootloader mode also..
so if any one know how to alive my phone than please reply me
thank you
(india)
Thank you for the link I never found an alternative, I will have to look in to this.
swapniladsure said:
ROM flash from SD/MMC: Without needing 2nd device
here is link
http://forum.xda-developers.com/showthread.php?t=393370
go for it
My Wizard 200 is also Dead after downgrading version 2 to 1
so now it is totaly dead ..even not go in bootloader mode also..
so if any one know how to alive my phone than please reply me
thank you
(india)
Click to expand...
Click to collapse
First THX for this link, but it's not what i'm looking for.
Some time ago i read about only to rename the ROM.nbf into a nother name (don't know the name, i'm looking for), copy this to the SD-Card and start manually the RUU.
Than after the RUU is started you have to press the green phone button and the wizard will be flashed from SD-Card.
Know I'm looking for the name i need for the .nbf file...
As far as I know what you’re asking for can’t be done, if you find a way please do post it.
The link I posted above was the only way I knew of.
double post
Ok, I'll do.
If i don't find out the name i try your way ,
or i install MS Win Xp again...
or wait till i get my diamond and put the wizard back in the rack.
I have read about 10 pages of charging and syncing problems but they weren't like mine. I flashed hardspl 3.34 and then it all went bad. When it is turned on it wont charge from wall/car/usb. When I put it into bootloader, it seems like my computer recognizes it (it asks me if I want to safely remove hardware) but windows mobile device center doesn't say it's connected, nor does it show up in computer. I did a hard reset and all that. It still has original 6.1 rom. Should I flash another spl? Or another rom? Any suggestions? I really hope I didn't f up my tilt. I finally got it after I bricked my wizard a year ago.
thedon809 said:
I have read about 10 pages of charging and syncing problems but they weren't like mine. I flashed hardspl 3.34 and then it all went bad. When it is turned on it wont charge from wall/car/usb. When I put it into bootloader, it seems like my computer recognizes it (it asks me if I want to safely remove hardware) but windows mobile device center doesn't say it's connected, nor does it show up in computer. I did a hard reset and all that. It still has original 6.1 rom. Should I flash another spl? Or another rom? Any suggestions? I really hope I didn't f up my tilt. I finally got it after I bricked my wizard a year ago.
Click to expand...
Click to collapse
Well, if you are in bootloader and you got the USB sign on it you are ok. Try to flash another rom or reflash your stock rom.
Yes bootloader seems to work and says usb. I think what I did was flashed hardspl 3.29 following the directions in the "flashing your first kaiser rom" thread. But when I flashed 3.34, I flashed it using usb and not an sd card like it said. I just want to go back to original spl and rom.
thedon809 said:
Yes bootloader seems to work and says usb. I think what I did was flashed hardspl 3.29 following the directions in the "flashing your first kaiser rom" thread. But when I flashed 3.34, I flashed it using usb and not an sd card like it said. I just want to go back to original spl and rom.
Click to expand...
Click to collapse
Just look here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Hope that helps
I flashed that rom and it still does the same thing.
thedon809 said:
I flashed that rom and it still does the same thing.
Click to expand...
Click to collapse
Let's try this one my friend http://forum.xda-developers.com/showthread.php?t=335568 probably you can revert back to the original spl and stock rom
What about these steps?
11. Download pof's SSPL-KAIS.exe and copy it to your phone
12. Run SSPL.KAIS.exe from your phone (make sure you do this on your actual device and not your PC)
I can't do them because my phone won't sync to my computer.
thedon809 said:
I think what I did was
Click to expand...
Click to collapse
That bit made me shiver.
stuntdouble said:
That bit made me shiver.
Click to expand...
Click to collapse
lol, I know that's exactly what I did. I was just saying, that I think that has something to do with it not charging and syncing. I'm not sure though, because I'm not a pro at flashing and all that. I can rebuild an engine, but I can't flash a stupid rom on a phone . Whatever I have to do to fix it, will have to work the next time because I only have about 60% battery left.
thedon809 said:
What about these steps?
11. Download pof's SSPL-KAIS.exe and copy it to your phone
12. Run SSPL.KAIS.exe from your phone (make sure you do this on your actual device and not your PC)
I can't do them because my phone won't sync to my computer.
Click to expand...
Click to collapse
Anyone have any suggestions on what to do about this? Will using my sd card work? Sorry about the noob questions. I know what it's like helping noobs that have no clue what they are doing.
thedon809 said:
Anyone have any suggestions on what to do about this? Will using my sd card work? Sorry about the noob questions. I know what it's like helping noobs that have no clue what they are doing.
Click to expand...
Click to collapse
You can upgrade SPL via SD but you will need a WM donor phone (spare) or a card reader to format the sd card. Try that and let us know if that worked
gmaniac2008 said:
You can upgrade SPL via SD but you will need a WM donor phone (spare) or a card reader to format the sd card. Try that and let us know if that worked
Click to expand...
Click to collapse
My hp laptop conveniently has an sd card reader.
Ok, to install from sd card, I put stock att hardspl RUU_signed.nbh and KAISDIAG.NBH into sd card, pop it in and go to bootloader? Correct?
thedon809 said:
Ok, to install from sd card, I put stock att hardspl RUU_signed.nbh and KAISDIAG.NBH into sd card, pop it in and go to bootloader? Correct?
Click to expand...
Click to collapse
Follow the instructions of how to flash via sd card from here: http://forum.xda-developers.com/showpost.php?p=2741200&postcount=1
Do I have to change the name of the att hardspl to KAISIMG.NBH?
thedon809 said:
Do I have to change the name of the att hardspl to KAISIMG.NBH?
Click to expand...
Click to collapse
No.
(message too short so adding more letters to post comment.......)
Hi I have
HTC Himalaya PH10A
[CE OS 5.2.23001 (Build 23001.5.0.60)]
and I want to upgrade my radio v1.06.01
I downloaded two radio versions v1.17 and v1.19
i read that v1.17 is most stable version,
and v1.19 has a flight mode issue but it is the latest version
I dont use flight mode so I would like to upgrade to v1.19
but my connector is broken so i can only use SD card
so my question is how to upgrade new radio with SD card on my himalaya
i cant find this anywhere i used search and nothing, or im searching wrong
pliz help!
1.17 is better anyway.
ok then ill use 1.17
but i didnt get an answer how to upgrade new radio with SD card
i think it's no so easy to upgrade your hima from sd, you need to have a sdcard backup for have some information and the only way for do a sdcard backup it's to have your connector.
i think it's better to solder your connector on your motherboard.
i already done the rom upgrade with sd card, friend has the same himalaya and we did it with his!
but is it the same process for radio rom install with sd card??
HTCMDA2 said:
u already done the rom upgrade with sd card, friend has the same himalaya and we did it with his!
but is it the same process for radio rom install with sd card??
Click to expand...
Click to collapse
Don't know it exactly, it should be the same. Can you wait about 2 or 3 weeks.
I'll disassemble the old one of aeroflyluby and use the spare parts. Are you able to solder a new used connector or is the mainboard damaged?
i think its not damaged, idiot in some mobile service soldered only 2 pins just for charging but usb doesent work, i dont even have a usb cable or a cradle so i find out few months later at my friends place, i seen this when i opened my himalaya the guy didnt even tell me that he done that
but i cant solder small pins like that, even he couldnt do it i think!
i would like to update my radio cause sometimes i cant get normal connection in places where is normal signal, and for the battery life cause my battery lasts on only one day if i use it a little
Did you test this: http://forum.xda-developers.com/showthread.php?t=596798
Underclocking when the phone isn't used works fine. You don't have to overclock, if you don't want to! Just set max speed to 400mHz.
So, it is a new connector badly mounted to your device? There should be a workaround to fix it, maybe someone else knows to fix that easyly !?!
HTCMDA2 said:
i already done the rom upgrade with sd card, friend has the same himalaya and we did it with his!
but is it the same process for radio rom install with sd card??
Click to expand...
Click to collapse
How did you do rom upgrade with SD card? Lots of guys here have broken USB connector and want to do rom upgrade with SD!
I will try to do that, okay?
http://wiki.xda-developers.com/index.php?pagename=HimalayaBootloaderSdCardFlashing
muckelmaus said:
Did you test this: http://forum.xda-developers.com/showthread.php?t=596798
Underclocking when the phone isn't used works fine. You don't have to overclock, if you don't want to! Just set max speed to 400mHz.
So, it is a new connector badly mounted to your device? There should be a workaround to fix it, maybe someone else knows to fix that easyly !?!
Click to expand...
Click to collapse
its the old connector, but it not broken, its just soldered badly, i mean only 3 pins just for batt charginig!
mns123 said:
How did you do rom upgrade with SD card? Lots of guys here have broken USB connector and want to do rom upgrade with SD!
Click to expand...
Click to collapse
we upgrade himalaya with working connector, and then used tutorial http://forum.xda-developers.com/showthread.php?t=482236 and the put the sd card in broken himalaya (mine) and it flashed prefectly! we used swampy`s rom
aeroflyluby said:
http://wiki.xda-developers.com/index.php?pagename=HimalayaBootloaderSdCardFlashing
Click to expand...
Click to collapse
nice man! big ups ill try that
HTCMDA2 said:
we upgrade himalaya with working connector, and then used tutorial http://forum.xda-developers.com/showthread.php?t=482236 and the put the sd card in broken himalaya (mine) and it flashed prefectly! we used swampy`s rom
nice man! big ups ill try that
Click to expand...
Click to collapse
Great! I was thinking you cannot use two Himas and do it this way!
Then the Radio upgrade should also work the same way.
in two pages we know everything now about rom and radio upgrade with sd card!
very nice
tnx to everyone
aeroflyluby said:
http://wiki.xda-developers.com/index.php?pagename=HimalayaBootloaderSdCardFlashing
Click to expand...
Click to collapse
im want to try this but how can i copy only radio from another himalaya, and upgrade to mine?
first copy the first 3 M of the radio to sd
d2s 60000000 00300000
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD: Detected one card
SD:ready for transfer OK
Total card size=1D30000ze=0
****************
Store image to SD/MMC card successful.
HTCMDA2 said:
im want to try this but how can i copy only radio from another himalaya, and upgrade to mine?
Click to expand...
Click to collapse
Try this Radio. taken from c_shekhar's rom accessories, to update working hima to 1.17.
i found this:
Flashing Radio from microSD
Originally Posted by vip_snoopy
Hi all,
I always find flashing with a card is a lot faster than using a software because I can do this anytime with just one little card. I didn't find this in wiki so might as well just make one. tested by myself.
***IMPORTANT***
Please make sure you have HardSPL on your device. And also make sure you have more than 50% of battery left or you can plug in a charger just to make sure there is no power failure. I am not sure if SIM unlocked is necessary prior to performing these steps, so hopefully someone (maybe pof) can help me with this. DO THIS AT YOUR OWN RISK.
1. Get a 128MB MicroSD card (or whatever size you like) and format it (***please make sure you format it, but not just delete all contents on it) NOTE : Make sure you format it FAT32
2. find the Radio image you would like to use, normally named RUU_Signed.nbh, and rename it to "KAISIMG.nbh" [i think this part is not for hima, its Radio_.nbf]
3. Plug the card into the phone, then enter boot loader mode by pressing down the Power and Camera buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears. (taken from Wiki)
4. You will first see a tri-color screen then the information on the card. Press power button to start flashing.
5. After all these are done, press the reset button located at the bottom of the phone to reset the device.
DISCLAIMER
I take no responsibility for any conflict, fault, or damage caused by this flashing procedure. No warranties of any kind are given.
Can we try this on our himalaya??
No. We can't