When are phone and stereo all OK on WM5? - MDA III, XDA III, PDA2k, 9090 Software Upgrading

MS stack can only support phone and Widcomm can only support stereo.
Oh, My God.
When are they OK together?
Helmi, where a u?

major problem
so am i, i used my itech s-35 as stereo headset using helmi untested broadcom
on xplode aku3.5 rom,may be theres a solution out there!!!

luoyong said:
MS stack can only support phone and Widcomm can only support stereo.
Oh, My God.
When are they OK together?
Helmi, where a u?
Click to expand...
Click to collapse
oops sorry my friend, My BA is dead backthen, but now my ba is alive again... hopes I'll post a good news about broadcomm and BA, fyi, I've successfully transmit all audio (stereo & non stereo, like notification etc) to bt headset, but on universal device its conflict with ril system (gprs module and stuff) I'll try to start testin on BA again... hopefully It'll end up good..

I'm from China. Glad to talk with you.
helmi_c said:
oops sorry my friend, My BA is dead backthen, but now my ba is alive again... hopes I'll post a good news about broadcomm and BA, fyi, I've successfully transmit all audio (stereo & non stereo, like notification etc) to bt headset, but on universal device its conflict with ril system (gprs module and stuff) I'll try to start testin on BA again... hopefully It'll end up good..
Click to expand...
Click to collapse
Wa~~~oh~~~~
Helmi is appeared.
I've test many version like 1.7.1.3400,1.7.1.9000,1.7.6.0500 and used your patch1 and patch2. All version are support stereo very well. but with headset mode connecting headset like incoming telegram. So I press switch. The headset icon display connecting. Next I call, but the voice is through BA either headset.
This is my test.Hope helpful and wait for your good new.

both thing solve
luoyong said:
Wa~~~oh~~~~
Helmi is appeared.
I've test many version like 1.7.1.3400,1.7.1.9000,1.7.6.0500 and used your patch1 and patch2. All version are support stereo very well. but with headset mode connecting headset like incoming telegram. So I press switch. The headset icon display connecting. Next I call, but the voice is through BA either headset.
This is my test.Hope helpful and wait for your good new.
Click to expand...
Click to collapse
hello luoyong,
i think i meet already my lovely Rom(HELMI BA-WM5 AKU 3.5)just launch.
both bta2dp and phone now working fine for me
i`m using i-tech s35 head clip
go and try the rom
thanks alot to Helmi_c and others develepors(Mr MAMAICH.XPLODE,TUATARA AND ALL our friend here)
xda2s
ROM:5.04.09.WWE
RADIO:1.12
EXTROM VER: HELMI 1.4

renesis said:
hello luoyong,
i think i meet already my lovely Rom(HELMI BA-WM5 AKU 3.5)just launch.
both bta2dp and phone now working fine for me
i`m using i-tech s35 head clip
go and try the rom
thanks alot to Helmi_c and others develepors(Mr MAMAICH.XPLODE,TUATARA AND ALL our friend here)
xda2s
ROM:5.04.09.WWE
RADIO:1.12
EXTROM VER: HELMI 1.4
Click to expand...
Click to collapse
That's very good!
But the version is WWE. So I need a cab file and install it in my CHS version.
4 months ago, PP and many other R&D tried to modify Helmi's rom from WWE to CHS. Since learning rom kitchen PP start creating rom from OS,LOC,OEM... and use .0804 chinese language file. So if Helmi can make a widcomm cab file which support phone and stereo, PP can make it into CHS rom.
Thank you renesis. It's very kind of you!

renesis said:
hello luoyong,
i think i meet already my lovely Rom(HELMI BA-WM5 AKU 3.5)just launch.
both bta2dp and phone now working fine for me
i`m using i-tech s35 head clip
go and try the rom
thanks alot to Helmi_c and others develepors(Mr MAMAICH.XPLODE,TUATARA AND ALL our friend here)
xda2s
ROM:5.04.09.WWE
RADIO:1.12
EXTROM VER: HELMI 1.4
Click to expand...
Click to collapse
I just use this version. Stereo is connected, but MP3 is flash. I can hear the "di..di..." when I touch Start. I hear some system sound. Mp3,avi and more media, I can't hear.

renesis said:
hello luoyong,
i think i meet already my lovely Rom(HELMI BA-WM5 AKU 3.5)just launch.
both bta2dp and phone now working fine for me
i`m using i-tech s35 head clip
go and try the rom
thanks alot to Helmi_c and others develepors(Mr MAMAICH.XPLODE,TUATARA AND ALL our friend here)
xda2s
ROM:5.04.09.WWE
RADIO:1.12
EXTROM VER: HELMI 1.4
Click to expand...
Click to collapse
my i-tech R35 bluetooth stereo headphone still not work,why????
ROM:5.04.09.WWE
RADIO:1.15 <-----------------------------------------is radio version too high??
EXTROM VER: HELMI 1.4

Nickey said:
my i-tech R35 bluetooth stereo headphone still not work,why????
ROM:5.04.09.WWE
RADIO:1.15 <-----------------------------------------is radio version too high??
EXTROM VER: HELMI 1.4
Click to expand...
Click to collapse
hello Nickey,
hope this one can help
what i did was after pairing the device i do not use the bluetooth icon in comm manager to on the bluetooth. try to connect from setting -bluetooth setting-mark the turn on bluetooth box.(also from comm manager).i dont know why i can get trough but working fine-hope somebody with more experiences will clarify this problem maybe Helmi_c could
regarding the radio stack last time i used 1.15 then down grade to 1.12 .may be in next i try with 1.15 again.
ROM:5.04.09.WWE
RADIO:1.12
EXTROM VER: HELMI 1.4

renesis said:
hello Nickey,
hope this one can help
what i did was after pairing the device i do not use the bluetooth icon in comm manager to on the bluetooth. try to connect from setting -bluetooth setting-mark the turn on bluetooth box.(also from comm manager).i dont know why i can get trough but working fine-hope somebody with more experiences will clarify this problem maybe Helmi_c could
regarding the radio stack last time i used 1.15 then down grade to 1.12 .may be in next i try with 1.15 again.
ROM:5.04.09.WWE
RADIO:1.12
EXTROM VER: HELMI 1.4
Click to expand...
Click to collapse
thx, I will try it immediatlly

renesis said:
hello Nickey,
hope this one can help
what i did was after pairing the device i do not use the bluetooth icon in comm manager to on the bluetooth. try to connect from setting -bluetooth setting-mark the turn on bluetooth box.(also from comm manager).i dont know why i can get trough but working fine-hope somebody with more experiences will clarify this problem maybe Helmi_c could
regarding the radio stack last time i used 1.15 then down grade to 1.12 .may be in next i try with 1.15 again.
ROM:5.04.09.WWE
RADIO:1.12
EXTROM VER: HELMI 1.4
Click to expand...
Click to collapse
luoyong said:
I just use this version. Stereo is connected, but MP3 is flash. I can hear the "di..di..." when I touch Start. I hear some system sound. Mp3,avi and more media, I can't hear.
Click to expand...
Click to collapse
My problem is identical with luoyong‘s.

Helmi, can you help me to solve this problem? thx very much!!!!

Hi, Helmi_c.
Have you find out the bug from widcomm 1.7.x?
We are waiting for you.
Thanks a lots!

renesis said:
hello luoyong,
i think i meet already my lovely Rom(HELMI BA-WM5 AKU 3.5)just launch.
both bta2dp and phone now working fine for me
i`m using i-tech s35 head clip
go and try the rom
thanks alot to Helmi_c and others develepors(Mr MAMAICH.XPLODE,TUATARA AND ALL our friend here)
xda2s
ROM:5.04.09.WWE
RADIO:1.12
EXTROM VER: HELMI 1.4
Click to expand...
Click to collapse
when i install this version of rom, my wifi are not available.. means cannot activate via wireless manager (i will be diverted to comm manager) at connection tab of setting n no wireless icon available.. however, kerio teaches me to activate via system tab.. will try soon

Related

BT3900 or BT3500

Hi all,
Just got my PDA2k and like all of you I'm suffering the bluetooth problem. Can someone tell me which is a better fix the BT3500 or BT3900? Does this fix the problem of headset bonding when phone resumes? Does anyone have a link to where either can be downloaded please?
Thanks
Medube 8)
The files are here ftp://xda:[email protected]/BlueAngel/CAB_Files/Bluetooth Upgrades/
I found the 3900 a little bit better, but i think its very independent for each setup.
i sold my XDA2s to a friend (probley soon to be ex friend) anyway as it hard reset its self he gave it back to me to reinstall his tomtom. As there was a rom upgrade i did this as well, i also used the the BT3900 from my XDA2i but i could not get the 2s to pair with any BT headsets, so i had to go back to the BT3500 that came in the new rom upgrade.
John
Im trying to get hold of bt 3900 but i cant get on to the ftp server? do I need special access or is it something im doing wrong (like clicking the link with the wrong finger or somthing :shock: )
irelmo said:
Im trying to get hold of bt 3900 but i cant get on to the ftp server? do I need special access or is it something im doing wrong (like clicking the link with the wrong finger or somthing :shock: )
Click to expand...
Click to collapse
Try using an FTP klient instead of using your browser.
Host : xda-developers.com
User : xda
Pass : xda
Just put the user and password in lower case
I'm confused. Isn't OEM_WWE_160_600.sa.CAB (version 1.6.0.600) a newer version than 1.0.0.3900 or 1.0.0.3500?:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Bluetooth Upgrades/OEM_WWE_160_600.sa.CAB
Click to expand...
Click to collapse
I'm running this version without problems and includes the "Connect to a keyboard" and "High quality audio setup" bluetooth profiles.
andresp said:
I'm confused. Isn't OEM_WWE_160_600.sa.CAB (version 1.6.0.600) a newer version than 1.0.0.3900 or 1.0.0.3500?:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Bluetooth Upgrades/OEM_WWE_160_600.sa.CAB
Click to expand...
Click to collapse
I'm running this version without problems and includes the "Connect to a keyboard" and "High quality audio setup" bluetooth profiles.
Click to expand...
Click to collapse
Well as far as i know, the 160_600.sa.cab is a Widcom release, whereas the 3500 and 3900 are Broadcom, and these 2 companies are now the same....again as far as i have heard.
I tried the 160_600.sa.cab but it was a total disaster. Dont let the numbers fool you. Since these are from 2 different companies.
someone has explained in other post that Widcomm 1.6.0.600 is older than Broadcomm 1.0.0.3900. After Broadcomm bought Widcomm they reseted version numbering to 1.0.0
Currently the latest BT stack I was able to find is 1.0.0.3900 and audiogw.dll - 1.33g.00. There is 1.35.00 DLL but it has problems transferring call from BT to handheld. audiogw.dll is the reason of bad sound quality over BT.
I have upgraded to BT 3900, after soft reset the sound cracled like hell, so I reinstalled 3500 and the fix for it (posted on the FTP), then the sound was better, I then reinstalled 3900 and it now sounds good as well. I noticed that the crackle is intermittent on both 3500 and 3900.
Yesterday evening I fully charged my PDA2k and this morning it needed to be charged again, I only made 4 short calls. But I must say that I had my SE HBH-660 off all the time!!??. could this be the reason or the 3900.
P.S. I run my PDA2K with the Arabisation software, and I used to have a lot of hanging and freezing but after cooking the ROM and updating the Radio to 1.06.02 and replacing Caller ID 1.17 (in the extended ROM) with 1.20, it has been running without trouble (for three weeks) in spite of loading lots of other software.
I reckon removing Caller ID 1.17 from the Extended ROM was a good thing!!
ROM Version 1.31.00 WWE
ROM Date 12/13/04
Radio Version 1.06.02
Protocol Version 1337.38
ExtROM Version 1.31.112 WWE
Simple.
Mamaich
Does BT 3900 come with this version of audiogw.dll - 1.33g.00 or is this a sperate file file you have upgraded. If it is can you tell me where to get it from. Ive tried a search here and on google .
Out of interest how do you determine the dll version in pocketpc as this file doesn't come up in the bluetooth manager file list?
I'm using the HP headphones and am pretty happy but the quality is a bit scratchy when you put the XDA2s in your pocket, would be nice if this could be fixed.
Thanks
Wayne
wth said:
Mamaich
Does BT 3900 come with this version of audiogw.dll - 1.33g.00 or is this a sperate file file you have upgraded. If it is can you tell me where to get it from. Ive tried a search here and on google .
Click to expand...
Click to collapse
Uhh...did you read this thread?
The link is in here...
But ok, here it is again: ftp://xda-developers.com/BlueAngel/CAB_Files/Bluetooth Upgrades/
Look at the BT_Fix as wel...what version the audiogw.dll is, I am not sure, but I think the fix has the latest version.
Cheers,
Happy
HappyGoat - Uhh...did you read my question?
as wel...what version the audiogw.dll is, I am not sure, but I think the fix has the latest version
Click to expand...
Click to collapse
Sorry perhpas I didn't ask the question clearly enough, but what I was asking was.... Is that version of the audiogw.dll included in the 3900 patch?
I only asked as it was stated as a particular version and I dont know how to check the dll version info.
Thanks
Wayne
BT 3500 better than 3900
Yesterday evening I fully charged my PDA2k and this morning it needed to be charged again, I only made 4 short calls. But I must say that I had my SE HBH-660 off all the time!!??. could this be the reason or the 3900.
Click to expand...
Click to collapse
I had the same experience this weekend.
I used to charge it on Friday night and use ir regulary during the weekend with my HBH-600
This weekend, Sunday night battery was exhausted.
I also think that BT 3500 is more stable
audiogw.dll is not included in this one BroadcomCorp_BT1.0.0.3900.cab
Mine is eating power like i have never seen it done before.
Only think .3900 did for me, it's faster to end a conversation pushing the button on the Headset.
I have BT 3900 installed and don't have problems with battery. I have a bonded BT headset and BT activesync connection with PC.
Regarding audiogw. Fix_For_BT.sa.CAB has an updated TIBinaryParser.dll. It deals something with WiFi and BT coexistence. I don't use WiFi so I didn't notice any differences. This archive also has 1.35.00 audiogw.dll that has problems transferring call from headset to phone. I don't recommend installing it. It was taken from Harrier 1.35 ROM and is probably incompatible with other ROMs.
I've attached audiogw.dll that I'm currently using. It is 1.33g version.
I just need some clarification please. If I want to update my BT 3500 stack which of the following cabs should I install ? One of them or both and in what order ?
BroadcomCorp_BTUpdatefor1.0.0.3500.cab
Fix_For_BT.sa.CAB
firas said:
BroadcomCorp_BTUpdatefor1.0.0.3500.cab
Fix_For_BT.sa.CAB
Click to expand...
Click to collapse
You don't need any of these 2 CABs. The first is high quality audio/BT keyboard profiles update and the second is a buggy DLL from Harrier ROM that cause problems on other devices. You need ftp://[email protected]/BlueAngel/CAB_Files/Bluetooth Upgrades/BroadcomCorp_BT1.0.0.3900.cab and the attached CAB in my prev. post. You may install BroadcomCorp_BTUpdatefor1.0.0.3500.cab if you use BT keyboard or have headset that supports high quality audio profile. I have these 3 CABs installed for 3 days and don't have BT problems.
The 3900 file is remove from that directory. Any idea why it's been removed?
rikurn said:
The 3900 file is remove from that directory. Any idea why it's been removed?
Click to expand...
Click to collapse
Maybe someone thought it was funny to delete it.
It's back there now.
Has 3900 improved static?
Has anybody with a PDA2k installed BT3900 to improve static on their BT headset with any success? I'm currently on 3500 through the imate ROM build, and can pair with my HS-850, but the static is pretty bad regardless of the range.

I-Mate 1.40 upgrade: no mms, no bluetooth headset

Since 'ive upgrade on I-mate 1.40 ITA I've this problems:
-I can receive MMS but no send
-My BT headset is found by the phone but no connection
Anybony can suggest me something 'bout?
Thanx, M
I have exactly the same problem with my handset. Its already paired, but not posible to conect with my XdaIIs
Don't know why?
It was working on te beginning. After instaling TT3 and other software, stoped to work.
Help is needed!!!
I've the same problem my BT headset is paired but not able to connect Before upgrading my pda2k to 1.40 rom ITA the headset was working fine
I've solved the headset problem installing BT 3500 version...
Ciao
Motard69 said:
I've solved the headset problem installing BT 3500 version...
Ciao
Click to expand...
Click to collapse
may you say samething more abou it?
some instruction, links
maybe idiot instruction how to do it, please.
From where I can get this bt350 & how to install this to my Xda?
best regards
sebek
You should reset your BT headset, delete all paired device on PPC, reset PPC and make new hand-free connection. This is my experience.
Thanks Motard69 I've soved the BT Headset problem with BT 3500, I found the cab file in the xda ftp area
Now I've to solve the last problem ringtone
Best regards
Gus
hung_ng said:
You should reset your BT headset, delete all paired device on PPC, reset PPC and make new hand-free connection. This is my experience.
Click to expand...
Click to collapse
I did it many times, never works
corona said:
hung_ng said:
You should reset your BT headset, delete all paired device on PPC, reset PPC and make new hand-free connection. This is my experience.
Click to expand...
Click to collapse
I did it many times, never works
Click to expand...
Click to collapse
Downgrade BT 1.0.0 Build 3900 to BT 1.0.0 Build 3500
I dit it yesterday and now works fine
Gus said:
corona said:
hung_ng said:
You should reset your BT headset, delete all paired device on PPC, reset PPC and make new hand-free connection. This is my experience.
Click to expand...
Click to collapse
I did it many times, never works
Click to expand...
Click to collapse
Downgrade BT 1.0.0 Build 3900 to BT 1.0.0 Build 3500
I dit it yesterday and now works fine
Click to expand...
Click to collapse
Thanks, Thanks, Thanks
It realy works
WOW!!!
Thanks a lot
:lol: :lol: :lol:
corona said:
Gus said:
corona said:
hung_ng said:
You should reset your BT headset, delete all paired device on PPC, reset PPC and make new hand-free connection. This is my experience.
Click to expand...
Click to collapse
I did it many times, never works
Click to expand...
Click to collapse
Downgrade BT 1.0.0 Build 3900 to BT 1.0.0 Build 3500
I dit it yesterday and now works fine
Click to expand...
Click to collapse
Thanks, Thanks, Thanks
It realy works
WOW!!!
Thanks a lot
:lol: :lol: :lol:
Click to expand...
Click to collapse
:lol: :wink:

Bluetooth handsfree help

Hi everyone,
I have been searching and reading through all the bt and headsets posts today with no result, my XDA IIi connects to the bt handsfree divices, but when calling are receiving a call there is only a small noise but I can not hear anything else. Can anyone help? I have two devices: a Vivanco BT65s and a Eagletec headsets and neither one works!
Thanks!
Rom version: 1.11.00 WWE
Radio version: 1.00.00
ExtRom version; 1,11,923 WWE
BT: Broadcomm 1.0.0 Buid 3900
Hi Bern,
Unsure whether you solved your prob already, but I'm running BCHS_FOR_POCKET_PC_OZONE.ARMV4.zip software, found in a magician thread, for more BT functionality and my BT earpiece works fine. Never tested it without this software so you can always give it a try.
Cheers, M
Can you do a link to where that file is please as I can not find it using the search function. Thanks
Nope,
Due to the limitations of PIE can't do it. It is in the first post of this thread though ;-)
http://forum.xda-developers.com/viewtopic.php?t=33532&start=0
Have fun, M

Blue Angel - A2DP Bluetooth

Hi all
I have got Blue Angel:
ROM: 1.42.00 WWE
Radio: 1.13.00
BT: 3900
Last week I upgraded to the T-Movbile 1.42 Rom. I then installed the A2DP profile patch and was amazed that my Omiz OMS600 headphones were actually working using the high quality audio profile, and they were working very well.
The other day I did a hard reset to sort out a few things and left it at that. Later on when I came to reinstall my A2DP it wasn't working, nor was using the headphones as just a normal headset. I tried all sorts, including downgrading my ROM because at that point I was wondering whether or not it was actually on a previous version that I had it working.
Anyway... eventually I decided it was the headphones that had an error so emailed Omiz who were very helpful and sent me the download for their firmware flashing utility. This upgraded the ROM of my headphones from 1.06 to 1.25. I can now pair my headphones as a headset but not as High Quality Audio. I can get it to add a High Quality Audio shortcut in BT manager but when it trys to connect it says: "connection failed". Before it was also saying "service unavailable on device" or somthing similar.
Any assistance would be good.
Thanks a lot.
s_t_harvey said:
I then installed the A2DP profile patch and was amazed
Click to expand...
Click to collapse
Can you, please, tell me where to find this patch?
Someone knows if it works for wm5??
Thanks!
A2DP & WM5
Hi there,
I got the patch from: ftp://xda:[email protected] Upgrades/BT profiles for build 3500/
But I'm not sure if it will work on WM5, I think I have read that it will not, this is my main reason for not moving to WM5 yet... although at the moment while i can't get A2DP working I am not much better off.
How are you finding WM5? Is it reliable enough to compete with WM2003 yet, or is there still a bit of work needed?
It doesn't work under WM5. WM5 has a Microsoft bluetooth stack, this patch does not apply.
WM5 on the BA is quite stable if you have the time to work with it. I am not going back. If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
A2DP on WM5
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Re: A2DP on WM5
s_t_harvey said:
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Click to expand...
Click to collapse
Yeah I think so. Apparently it's not out in the wild yet, but w/ BT 1.2, a lot of people will be looking to do more with it.
shuffle said:
WM5 has a Microsoft bluetooth stack, this patch does not apply.
Click to expand...
Click to collapse
Did you mean: "the mamaich rom has microsoft bluetooth stack". I really hope we can get WM5 with the same stack I had on w2003. (Broadcom, I think). Maybe it is out there but I can't see it...
shuffle said:
WM5 on the BA is quite stable if you have the time to work with it. I am not going back.
Click to expand...
Click to collapse
I agree. By the moment, I'm very pleased with the performance of WM5 on my BA. It actually runs faster than w2003! And I'm beeing very objective, believe me!
I'm having a big annoyance with writting (sms, word, etc) as the spelling isn't allways what I wrote. On the SMS window, it seems the screen gets redrawn all the time and it loose some words...
The other big is not having A2DP. I think is very frustrating having such a nice machine without a good software that makes all its goodness work! :?
Some delayings on the screen repainting and (I'm using Pocket Informant) slow performance on the everyday tasks as opening the contacts list, or changing toanother program, for example...
shuffle said:
If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
Click to expand...
Click to collapse
What do you mean? To have the BT on a low-power mode more or less?
cheers...
looking 4 answers: ad2p & bluetooth & wm5
somebody with an answer to this theme?
WAS: ad2p & bluetooth & wm5
It is somehow possible?
Anybody there? :roll:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
shuffle said:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
Click to expand...
Click to collapse
some URLs????
Thanks!
How do I enable A2DP on my BA??
Hello!!
I have searched the forum many many times and visited wiki, but I could only find 2 threads which is close to what I need to know. This is 1 of them.
I have got Blue Angel:
ROM: 1.40.00 WWE
Radio: 1.12.00
BT: 3900
This configuration came from the recently rom upgrade from o2.
It seems to me that it's possible to enable A2DP on a BA running on WM2003 SE, which allows me to stream music to a bt headphones??
However I just could not find a thread which has an instruction on how to do it. Not even on wiki. After reading some threads, I came to my own conclusion that I need to upgrade me BT to build 3900 and install a patch??
So this was what I did,
Since my BT is already 3900 "offical" version, thus I didn't do anything to it.
I d/l this file BA_OEM_AudioGW (1.33g.00).CAB (83KB) and ran it on my PPC. I then got the audiogw.dll in my windows folder.
That was all I did. It didn't work of course. I have another file, BroadcomCorp_BT1.0.0.3900.cab but didn't use it as I'm already on 3900??
So I was just hoping that someone who has done it and was successful, could point me in the right direction!!! Thanks a lot!!!
anyone tried running both cab loacted at
ftp://ftp.xda-developers.com/BlueAn...age BT 1.0.0.3900 and audiogw.dll - 1.33g.00/
if it works, do let me know. I currently do not have a bluetooth headphones to test with.
I have Omiz headset (with MP3 and radio FM) and due to work with my Magician I had to manually change some registry entries. Point was that my PDA was not correctly identified as a A2DP device (only HF). I paired my PDA with normal BT dongle with A2DP profile, found registry entries with dongle mac adress and copied manually keys coressponding with a2dp service to folder with my headphones profiles. After all that it was possible to chose headphopnes in BT menager as stereo audio receiver.
Maybe its similar and u should look in registry...
jarekt, can you post those registryvalues please?!
Can't get streaming audio to BT headphones
I still have had no luck with the BA_OEM_AudioGW (1.33g 00) Cab or any registry settings under WM5.
BT a2dp WM5
have you tried the file (.cab) i uploaded in BlueAngel under uploads, it let me pair BT Stereo under wm5. Nevermind I looked someone deleted it dont know why. PM me and i can send if you want, I tried to reupload but Uploads appears broken.
I am on thesame situation of errorist.
My machine is on Broadcom 3900, and I want to make A2DP work.
If anyone can shed a light on how to make it work, I'd be very very grateful.
BTW, I have a Motorola HT820.
UPDATE:
I have installed the 3900 stack + audiogw dll even though I had a factory-installed 3900 stack, and I managed to connect in handsfree mode.
I still have not found out how to connect in A2DP mode though...
Any help is appreciated.
Hi All
I dont know how useful this is going to be, but i spent ages doing research to get my ht820 and my 02 xda 2s working properly, and when i did, i wrote a semi bad guide here
http://www.corecodec.com/index.php?option=com_smf&Itemid=29&expv=0&topic=2840.0
if its any use i'd be tempted to maybe write it up proper and put in in the wiki, either way, try some of the steps or files ive listed (most of them are from here)
but it gets it working with TCPMP aswell, which is a lot better than WM10 anyhow
good luck
BTW: ivans rom uses the broadcom stack, so the patch may work, however i dont have the headphones to test it with
i've onstalled this two cabs too, but new profile didn't appeared. Bay Be some registry values didn't appied? who did this patch?

A2DP on Ivan's rom w Ramdisk

Is anyone able to use a BT stereo headset with the latest Ivan rom with ramdisk? I flashed it and installed the A2DP cab but even though it shows the service when pairing it doesnt allow you to set the headset as Wireless Stereo. Thanks
Need The CAB
@efjay...
Which CAB do you install to get the profile to show up?
Check this thread and grab the cab about 3 posts down... http://forum.xda-developers.com/viewtopic.php?t=48502
Cheers! Off to play with it now...
Seems Not...
Installed the CAB, paired my iTech headset, got the option to use the Wireless Stereo profile, ticked it, then went to the Paired devices and got the option for Handsfree only, no Stereo
Hopefully Logouts new AKU2.3 based ROM will include A2DP, or TuMa 1.5, once the baby arrives and he gets into a routine!
This cab will not work on ivans rom unless heavy patching is done, it is not compatible with msfp and aku2
Will any of them work?
Do you know of any A2DP CAB's which might work with this ROM, it's all that's not right with it for me... or even what patches/hacks are needed?
it needs to be an aku2 rom afaik, but if we can get bepe's fix working i should be able to upgrade it to 2.3 very soon
Midget_1990 said:
it needs to be an aku2 rom afaik, but if we can get bepe's fix working i should be able to upgrade it to 2.3 very soon
Click to expand...
Click to collapse
@Midget_1990
Goodluck! Waiting for the good news soon!
Yaantra
Hey guys,
I just finished installing the cab, Paired the device, also got the option to use hands free as well as Wireless stereo, checked it, but nothing much after that...
I guess the rest of you r in the same boat too?
Yaantra
don't try that cab, it is easy to build your own aku 2.3 rom read here
@xplode
building the rom is fine, it's kowing what to add for the A2DP profile to work which seems to have stumped us all... as above, even on the AKU2.3 ROMS we get the option for Wireless Stereo when pairing, but not when we try to set a profile!!
spkr4thdd, did you try the cab on your AKU 2.3 rom to see if it works then? And do you know if the AKU 2.3 rom is based on the original WM5 port by mamaich or the later Wizard ports?
yes, i tried the cab on all of the aku 2.3 roms so far, and a few of my own, however it's the old problem of getting the option to pair the device as hands free + wireless stereo, but when you try to activate a profile you only get the hands free option...
The source is not maimaichs old Wizard port it's a new dump provided by bepe on buzzdev... not sure where he got it from I recall a post a while before this one stating that the dump was available, and the source...

Categories

Resources