Related
I have BELKIN broadband router (Irish Eircom broadband). Is it possible to connect XDA IIi (alpine) to this router through WiFi connection??? If Yes - Help me!
Yes it is. If the router is on the default settings you just need to touch the antrenna symbol at the bottom of the Today screen, then the green square at the bottom right, then the WLAN box and turn on WLAN.
Does anyone have a guide on how to setup a secure connection between PC & Phone on WI-FI?
It's baffling the heck out of me!
symondavis said:
Does anyone have a guide on how to setup a secure connection between PC & Phone on WI-FI?
It's baffling the heck out of me!
Click to expand...
Click to collapse
Depends on the router, what ya got?
I dont have a router, I have a WI-FI PCI card and my router is conected via ethernet
So you are trying to set up an ad-hoc connection.
You need to set your wireless on both the computer and the PDA to ad-hoc.
To do this on the PC depends on your operating system and device. Set up your wireless connection on the PC first making sure it is set up as an ad-hoc network.
On your XDAIIi Start>Settings>Connections Tab>Network Cards
You should see the network you have set up on the PC, make sure the ad-hoc box is ticked and connect to it.
You may have to set the TCP/IP settings manually. If you have a problem with doing that post up what you have done and how far you have got.
Yes, I'v got a connection! But NetFront_v3.2 says "Cannot read page." So, i can not surf Internet.
krayvid said:
Yes, I'v got a connection! But NetFront_v3.2 says "Cannot read page." So, i can not surf Internet.
Click to expand...
Click to collapse
Do you have the DHCP server turned on on the router?
Yes1 DHCP server IS turned on on the router.
OK, when you are connected and you click on the Wi-Fi icon on the bottom of the screen, does the network address match that of the router or has it set a default one?
Internet Connection Sharing
Depeding on your OS (is it windows/linux etc.) you'll nmeed to set up some form of proxy server or other packet forwarding to persuade the machine to accept packets on the WiFi card and to forward them to the Internet.
If you are using XP (or from memory 2K) you can switch on Internet connection sharing, follow the wizard and then browse to your hearts content.
Dave
Hi,
I also have a laptop with build-in Wifi and a qtek 2020i. I've shared the lan connection on the laptop and created a wirelles network. The laptop and qtek 2020i see each other but i can't surf on the qtek. i have windows XP.
The ip address on the qtek is fixed by default and is supposed to be 192. etc i read somewhere...
I use a modem/routeur (thomson 530) on which the laptop is connected (lan).
Could you please explain me how should i setup or manuallay choose the ip on my qtek?
Many thanks
john
Hey there
I also have a Qtek 2020i and an access point USR9106.could you plz tell me how you managed to connect to your laptop ? Plz give me instractions so i can do it myself.Thanks
Re: Hey there
nkonte said:
I also have a Qtek 2020i and an access point USR9106.could you plz tell me how you managed to connect to your laptop ? Plz give me instractions so i can do it myself.Thanks
Click to expand...
Click to collapse
I have O2 XDA 2i. I changed RADIO. Was 1.00.00 now 1.03.00. No problem with connection straight to Wi-Fi router!!!
Re: Hey there
krayvid said:
I have O2 XDA 2i. I changed RADIO. Was 1.00.00 now 1.03.00. No problem with connection straight to Wi-Fi router!!!
Click to expand...
Click to collapse
perhaps i'll give that a try, it might work for me, i hope it does as i'm not having much luck
Hi Guys,
This is starting to get confused - there are two types of connection being set up here: -
Firstly a cabled connection between the PC and the router with a wireless card in the PC. in this instance you need to forward the packets from the wireless card to the ethernet card and then onto the router.
In this case, if you are using Windows 2K or XP use the Internet connection sharing wizard, this will then enable packet forwarding on your PC, with a "DHCP server" (not fully functional) on the wireless card, when you establish the Ad Hoc (set exactly the same SSID on both cards - remember it's case sensitive and that should be all you need for Ad-Hoc) wireless connection between the 2020i and the PC you should then find that you are assigned an IP address (192.168.0.x is the default from memory). You should then have the IP address of the Wireless Interface Card on the PC set as your default gateway and DNS server - you need each of these entries in order to able to connect to the Internet.
If you want to secure this connection, you can use WEP (40 bit or 128 bit Same Key same position on both SSID configs), though remember that if a sniffer collects about 300K packets, it is possible to use AirCrack to regain the wep key - paranoid but true.
If you have a wireless gateway, this should (in all probability) already have a DHCP service up and running on it (it's probably giving your PC all of the IP settings it needs) so all you should need is to establish a connection between these two devices. Switch wireless on on the 2020 and you should be prompted with a message box saying Your_SSID connects you to and offer you work and Internet, select Internet if there is a WEP key or other form of encryption enabled you will be prompted for a key. In theory you will have set all of this up on the router in the first place so probably have some idea of what you are doing.
Hope this helps, if not feel free to throw abuse.
Kind Regards
Dave
try this link:
http://www.mtekk.com.au/browse/page1090.html
I tried it last night and it got it working in about 5 minutes!! was well pleased . I'm using the infrastructure mode, got a XDAIIi and a D-Link G604T. I dont have any authentication setup, the only thing I use is the MAC based access list, so I had to add the XDA MAC into the router access list and for the rest I followed what the above link said.
Tip: make sure you do a reset for the settings to take effect, did'nt realise thats why it took me five minutes!
hiya... sorry to bug anyone about this... but i have a problem logging on wifi connection on my Xda IIi...
using a dell TrueMobile 2300 wireless router...
(( i got a stinking feeling i might not able to do this.. cos been trying the last 4 hours and i just recalled whenever a com wants to link up with this router.. that com have to go thru it's Cd to Authz it first.. . ))
Any help would be greatly appreciated!
WPA WiFi connection
The only secure WiFi connection I can use on my XDA IIi is via WEP. For some unknown reason I cannot connect using WPA.
Any ideas...
Hi, I have a Tilt and do not have a problem tethering to a single computer. What I would like to do is share with all four computers in my home. I have tried bridging the sharing connection to my lan connection and have gotten dhcp on the Tilt to assign addresses to all computers on the network, but they still can't ping each other (other than the tilt and the computer its directly tethered to. I have turned off all firewalls and still nothing. Rebooted everything. Still nothing. Is it possible to do this? Thanks for any help.
There's a program around here somewhere that allows you to make your TILT a wireless router. If you do this, any machine with wi-fi can connect to the SSID and go.
Anyone have the link handy?
Wireless Router
Could I have it connect with my current wireless router to provide internet to my wired network through the rj45 ports on the router ? 3 of the 4 computers are on a wired lan. You see, we just got HSDPA on Monday and I love it. I got a bit ahead of myself and cancelled my home DSL connection. Now I'm realizing that I am stuck with only having one computer on the internet at a time. This has got to be possible. - I just found the thread on setting up as a wireless router. I will start playing with it. Any suggestions/instructions are appreciated.
OK, get connected to your carrier whilst tethered.
Then from any Explorer window on your tethered PC, select, 'Set up a home or small Office Network'.
Select the first option in the following box 'This computer directly connects...' and follow it through.
This should set up your Activesync PC as an IP address of 192.168.1.1. (an access point IP)
If you connect any other PC/laptop to this PC via wireless or LAN (you do know how to do that I hope??) to this computer, it will share the internet connection..
Remember, this will change any prior Internet configuration you have on the PC/Laptop!
Hope this helps.
Internet sharing
Thanks for the suggestion. I am going to try that again. The first time I tried that I found out that the Tilt had already assigned itself the address of 192.168.0.1 . On the XP machine, the computer will always use that same address to share its connection, so it immediately complained that another computer on the network is already using the required address for internet connection sharing. Maybe all I need to do is force the Tilt to use a different ip address like 192.168.0.10? I am not sure how to do that since this is my first time using Windows Mobile as part of a network sharing its connection. The only reference I could find to 192.168.0.1 in the registry was HKLM\Comm\BTPAN1\Parms\TcpIp. Should I change that?
jebrown1 said:
Thanks for the suggestion. I am going to try that again. The first time I tried that I found out that the Tilt had already assigned itself the address of 192.168.0.1 . On the XP machine, the computer will always use that same address to share its connection, so it immediately complained that another computer on the network is already using the required address for internet connection sharing. Maybe all I need to do is force the Tilt to use a different ip address like 192.168.0.10? I am not sure how to do that since this is my first time using Windows Mobile as part of a network sharing its connection. The only reference I could find to 192.168.0.1 in the registry was HKLM\Comm\BTPAN1\Parms\TcpIp. Should I change that?
Click to expand...
Click to collapse
NO, 192.168.0.1 or 2.1 or.3.1 are all access point AD's.
You have to go into your PC/laptop Network Places icon to tel IT to then share the connection.
I am sorry, but if you have never shared an internet connection on your PC before (ie via modem or ADSL), you will not really understand how it is done.
Access points
Thanks for your reply. The problem is that we are trying to make the pc an access point and trying to make the tilt an access point at the same time. They both are using 192.168.0.1 as the default ip address and as far as I tell there is not a way given to change that. The Tilt automatically uses 192.168.0.1 and when you using the sharing wizard on the pc it also uses the same address for its network card thats connected to the home wired network. Unfortunately for me, two devices on a network cannot have the same ip address. There must be a way...
jebrown1 said:
Thanks for your reply. The problem is that we are trying to make the pc an access point and trying to make the tilt an access point at the same time. They both are using 192.168.0.1 as the default ip address and as far as I tell there is not a way given to change that. The Tilt automatically uses 192.168.0.1 and when you using the sharing wizard on the pc it also uses the same address for its network card thats connected to the home wired network. Unfortunately for me, two devices on a network cannot have the same ip address. There must be a way...
Click to expand...
Click to collapse
OK, set all computers on the network to fixed IP's of 192.168.0.xxx in Internet protocol (under TCPIP on network)with the same subnet mask with a default gateway matching your device! Try that...
sharing
That was my first attempt at a work around. The problem is that there are
actually two network connections to the pc. One for the Tilt (usb) and one for the LAN (nic card). They don't seem to see each other even when they have matching ip addresses and subnets. Thats why I tried right clicking them and selecting "bridge these connections." It seems that internet sharing "requires" DHCP to be used. I tried setting all the computers to use DHCP and actually had the Tilt assigning ip addresses to all of the computers on the network by bridging the two connections and using dhcp. Oddly, though, the computers on the network could not ping the Tilt. I think its because bridging uses the data link layer of the osi networking model?
There must be a hack to change the ip address that windows uses for the sharing access point. Alternatively, it would be nice if there were a device out there that could act as a hub to network usb and 100baseT devices together. In other words, plugging usb and cat5 cable rj45 plugs into the same box and having them all be on the same network.
OK, I have asked smitty to get on this but both of us are WAYYYYy past our bedtimes.
He should get back to you tomoz on this. (he's the Network buff..)
Hope it works out..
this is the app mentioned earlier and may help your solution...
http://forum.xda-developers.com/showthread.php?t=341398
I can't make this work. I don't have WiFi on all of my computers. I was hoping to use WMWifiRouter to connect to my wireless router and then to my whole wired network. Is there a way to make the Tilt wireless router to connect with another wireless router? I'm thinking what I will do is go back to an AT&T rom and use "wireles modem" instead of "internet sharing". That way I can share the modem with the whole network. There doesn't seem to be a good way to use the Tilt internet sharing with the whole network. What do you guys think?
Deleted.....
For any future readers of this thread: I put the stock AT&T rom back on this phone and did a soft reset during the initial boot to stop the bloatware from loading. I went to start>settings>connections and tapped the wireless modem icon to open the app. I selected "usb" and tapped done then plugged the usb into my computer. My win xp computer found the new modem hardware and installed the HTC modem driver. I then setup a new dialup connection on my computer, and used the following to setup the login and dial:
username: [email protected]
password: cingular1
dial #: *99***1#
When I clicked on dial, it quickly connected to the AT&T network and I had internet access on my computer! I went to a speed test website and clocked my download speed at 1.2mbs and upload at 300kbs. I then opened "my network" and started the network setup wizard. I selected "this computer connects directly to the internet" and "file and printer sharing". To make a long story short, I am now able to share the Tilt's HSDPA internet connection with my whole network! I could not do it using the internet sharing function of the Tilt with either the AT&T rom or the kaiser rom. It would be awesome if someone more educated than me could make this function part of the HTC kaiser rom.
Nojnaworb wrote:
.....the problem is that we are trying to make the pc an access point and trying to make the tilt an access point at the same time. They both are using 192.168.0.1 as the default ip address and as far as I tell there is not a way given to change that. The Tilt automatically uses 192.168.0.1 and when you using the sharing wizard on the pc it also uses the same address for its network card thats connected to the home wired network. Unfortunately for me, two devices on a network cannot have the same ip address. There must be a way.......
I have same problem. I agree with Nojnaworb, this is the reason why its not working.
I have no Wifi at home and have to use LAN for my home network (2 PC + 1 ppc).
Under WM5 it was easy to share Internetconnection with all Lan adapters.
I cannot believe there is no way.
PLS Networkexperts, tell me how to setup !!
Its really quite simple.
You dont connect all the computers to the tilt. You use ICS on the tilt to provide one pc with an internet connection.
You then share the internet connection from that pc to the other pc's using the networking wizard.
I think part of this persons problem was that he needed to bridge the 2 connections.
here have this.
http://www.windowsnetworking.com/articles_tutorials/wxpbrdge.html
You should be able to connect the Tilt, (let it use whatever address it wants) and then make a bridge from the tilt to your nic in the server. Then I beleive you just use internet connection sharing to disperse the lovely packets to the rest of the network. Without the bridge, there is no way to share from one network to another.
I'm pretty sure that you will need to set the address to 192.168.0.2 on the server or any other number were the 2 is. If your using a router then I would suggest turning off dhcp and not using the WAN port on it. Just treat the router like a switch/hub because it will just makes things even harder to figure out.
wish we had service that was worth sharing to my network.
Hi all,
I used to use my Diamond connected via USB and the 'Internet Sharing' function to provide Internet access to my laptop running Vista without any problems whatsoever...
However I have recently upgraded to Vista and don't seem to be getting anywhere... or rather getting somewhere but not far enough!
Specifically, I can connect the Diamond to the laptop via USB and run 'Internet Sharing' on the device. Having hit Connect and connected to the Internet (confirmed my running a browser on the Diamond) the laptop detects a 'Remote NDIS Internet Sharing Device' in the Device Manager. It then adds a connection in Network Connections but seemingly-fails to get any further. It looks like the DHCP requests are falling on deaf ears and without an IP address it's not going to get far beyond that...
Anyone with any ideas? Or, at the very least, could someone confirm that they have got Internet Sharing working with Windows 7, even if they didn't necessarilly have to do anything special?
Regards,
Mathew
Typical... you think you've tried everything, you've exhausted Google and posted a forum post as a last resort plea for help.... Five minutes later you sort it! Mustn't moan I suppose... and in case anyone else hits this problem here's how to sort it:
The problem was calling out to me really - DHCP. I had Layer 2 connectivity but without establishing anything at Layer 3 it simply wasn't going to work so if statically asign the IP address then I could at least rule DHCP out of the equation to see what additional hurdle, if any, had to be then tackled.
The problem was that without knowing the address at the other end (i.e. the Diamond) then I wouldn't know what subnet to put my laptop in. However, this all worked fine on Vista so I fired it up and ran Wireshark (network packet sniffer) and could see that the laptop was being given an IP address from the 192.168.0.0/24 subnet and that the other end (whether that be the Diamond or some virtual device that at least representa it) was sat on 192.168.0.1. Strangely, the other end had a MAC address of 82:00:60:0F:E8:00 and the laptop 80:00:60:0F:E8:00 - whilst they're not globally assigned this must be what Microsoft use on the local link for these types of connections.
So, back to Windows 7, I fired up Internet Sharing and connected to my ISP. I now had a LAN connection listed on the laptop under Network Connections so I forced a static address assignment by right-clicking it and selecting Properties > Internet Protocol Version 4 (TCP/IP) > Properties and assigning the following:
IP Address: 192.168.0.80 (choose anything within 192.168.0.2-254 but stay away from anything you might already have assigned to other connection e.g. wireless/wired Ethernet etc)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DNS Server: 192.168.0.1
Hit OK and then, being the Microsoft way, you will likely need to bruteforce the new application of the new setting by disconnecting and reconnecting the Internet Sharing connection. The LAN connection on the laptop will disappear and reappear, hopefully with a static address assigned (right-click it and select Status - DHCP should be disabled).
I still don't know why DHCP was failing but regardless I've got what I wanted - shared access to the Internet!
Cheers,
Mathew
Nice one, thanks for sharing.
Hi,
I have an interesting problem. I am in Dubai, where the ISP (Etisalat) provides Internet via Fiber-optic cables to my residence. They have this modem which I connect my wi-fi router to.
After connecting to my wi-fi router the usual way, I have to dial-in via a Broadband PPPoE connection, where I provide the ISP username and password. I have to do this every time I connect to the Internet.
Unfortunately, this means I cannot connect my Nexus One to the Internet This is because I am not aware of any app/functionality that enables PPPoE dialing on Android.
I had installed Connectify for Windows 7 that enabled me to share my authenticated Internet connection with other devices (and hence my N1). However, after FR83, this seems to have stopped working as well, for some reason. It is extremely difficult to connect to the shared Wifi created by Connectify, and even after connecting, I cannot browse the Internet.
I have already tried setting a static IP address for the N1, but this did not resolve the issue.
Can anybody offer guidance, ideas? Any help would be much appreciated!
Cheers,
PI
Get a router, set the router to connect through PPPoE and every device that connects to the wireless router will work.
Thanks, but I wouldn't want to spend more money...
lorin.bute said:
Get a router, set the router to connect through PPPoE and every device that connects to the wireless router will work.
Click to expand...
Click to collapse
Thanks, but I wouldn't want to spend more money on another router. I have a Wi-fi router already, but I don't know if it has the ability to connect via PPPoE. It's a 3COM 3CRWDR200A-75.
Will try and research if I can enable PPPoE via this somehow.
Cheers,
PI
Protocol Set: Dynamic and static IP addressing, DHCP Server, NAT/PAT (with TCP and UDP), PPTP/PPPoE, CHAP, IPCP, SNTP.
http://www.3com.com/products/en_US/detail.jsp?tab=prodspec&sku=3CRWDR200A-75&pathtype=purchase
There you go.
Set your current router to connect through pppoe and you are ready.
Good luck.
droid does
https://market.android.com/details?id=com.cnddu.wifipppoe&feature=search_result
I believe ur wifi "router" is only a wifi access point...
just download wifi pppoe
elgarteo95 said:
I believe ur wifi "router" is only a wifi access point...
Click to expand...
Click to collapse
More accurately, it is a router that happens to have a wireless interface. Most home wireless routers usually have the functionality of a switch as well (that is, providing multiple connections to the same local network), but they usually include routing capability to move traffic from your local area network to the Internet.
Hi guys. I have not access to market because of my region. Can any body get me the WIFI PPPoE ?
wifi pppoe doesnt work for me
Is there any way to connect to internet via VPN (PPTP, L2TP-IPSec, or OPENvpn). Is it possible to install the necessary system/binary stuff to be able to so through adb, ssh, or telnet. I am connected to the internet through my phones hotspot, my laptop is connected to VPN. And when I am not connected to VPN for any reason I can make the chrome useragent changer to appear as an ubuntu or linux machine running chrome. When the content being requested is local on laptop plex media server and requesting it through patched plex it can play just fine, and that is with the laptop connected to internet via VPN, when I try to play something on plex that is streaming it just hangs like it wants to play but doesn't load. when I attempt to play streaming media via AVIA I get sent to the 4gLTE ISP provider (tmobile) upsell page that appears when they sense that you have something connected via wifi hotspot tether. I think that when plex is hanging at the loading page that it is also getting the upsell page but it just doesn't show up on the screen. If it is possible to make the CC connect through VPN or change the user agent of the chromecast I should be able to bypass the upsell page that is saying I can't connect via wifi tethered devices. This makes me think that the dns servers I have set in eureka web panel may not actually be making their connection through the servers from openNIC that I set it to use. The chromecast can communicate with my laptop when it is connected to VPN simultaneously without a problem.
Is it possible to innstall the privateinternetaccess PIA VPN app on the chromecast and add it to the eurekarom whitelist? or any openvpn app will work so other people with different vpn providers can also connect with the correct configuration files in place. Or does anyone know how to make the chromecast go through VPN that is active on phone, like the way a router that is connected to VPN makes all of the clients connected to it go through the VPN without the need to sign in to the vpn on each device.
Here's how I did it !!!
I'm also tethering via T-Mobile & ran into the same problem as you !!! What I've done before the 15250 update was run an app named Network Spoofer downloaded from blackmart app // I turned hotspot on my phone & my Asus Tf700 was connected to the WiFi created by t mobile I used VPN unlimited & while its connected // I ran the Network spoofer app & I either use adblock *** or redirect traffic through phone - this being the most often used option !!! After selecting redirect // I selected default gateway // I then chose the IP address that my chromescast is using // the chromecast name under IP address sometimes doesn't show up // so you'll have to know what your chrome cast IP address is // you can find this by using the chrome cast app !!!
The network spoofer app, found on sourceforge doesn't function correctly on nexus 4, at least not for me.
I ran into the same problem. Plex Media Server would not work on T-mobile tethering. I tried Network Spoofer and used Redirect Traffic Through Phone and give it the ip address of the the laptop that hosts Plex Media Server, it didn't work. Even the browser on this laptop would bring up the T-mobile upsell page. It seems this feature would simply let everything pass through the phone.
Any other suggestion?
Here's my setup
An LG phone with T-mobile LTE attached to my router via USB tethering. The router then serves every device, wired and wireless, on my network. Roku and all PCs works fine if I change the User Agent of the browser. Only the Plex Media Server would cause T-mobile to bill the traffic against the limited 2.5G tethering, the rest got billed against the unlimited data plan.
1.connect windows PC to wifi/usb tether connection
2.connect computer to VPN
3.create WiFi hotspot on CPU via
"Solution A
- Go to*Control Panel*>*Network*/*Network and Sharing Center
- Go to*Set up a new connection or network
- Go to*Set up a wireless ad hoc (computer-to-computer) network
- Add a Name and Password (and set the security type onWEP) and Checked*Save this network*and press*Next
- [Windows 8.1] Confirm*Turn On*Internet Connect Sharing
- [Windows 8, 7 or Older] Right Click on available network and select*Properties*and go to*Sharing*Tab and checkedAllow other network users to connect through this computer's Internet connection
Solution B
- Go to*Control Panel*>*Network*/*Network and Sharing Center
- Go to left sidebar and select*Manage Wireless Networks
- Go to top left and select*Add
- Go to*Set up a wireless ad hoc (computer-to-computer) network
- Select*Next
- Add a*Name*and*Password*(leave security type on*WEP) and Checked*Save this network*option
Solution C
- Press*Windows Key + R*and type*ncpa.cpl
- Select current WiFi Adapter and Right Click on it and select*Properties
- Go to*Sharing*Tab and checked*Allow other network users to connect through this computer's Internet connection
- [WINDOWS 8.1]: go to left bottom screen and selectCommand Prompt (Admin)
- [WINDOWS 8, 7 or Older]: Press*Windows Key + R
- Change PASSWORD 12345678 and SSID AMASTANEH in below text and type it on black terminal screen
netsh wlan set hostednetwork mode=allow ssid="AMASTANEH" key="12345678"
- you can start and see the ready network with this command
netsh wlan start hostednetwork
Solution D
- Download Virtual Router (Wifi Hot Spot for Windows 8, Windows 7 and 2008 R2) fromhttp://virtualrouter.codeplex.com/
- Install and Run and Enjoy
Solution E
- Download*Connectify from*www.connectify.me
- Install and Run and Enjoy "
4.connect chromecast to wlan hotspot created in step 3
Step 3's source comes from here
http://blog.amastaneh.com/2014/01/how-to-create-windows-wifi-hotspot.html?m=1
smartymcfly said:
1.connect windows PC to wifi/usb tether connection
2.connect computer to VPN
3.create WiFi hotspot on CPU via
"Solution A
- Go to*Control Panel*>*Network*/*Network and Sharing Center
- Go to*Set up a new connection or network
- Go to*Set up a wireless ad hoc (computer-to-computer) network
- Add a Name and Password (and set the security type onWEP) and Checked*Save this network*and press*Next
- [Windows 8.1] Confirm*Turn On*Internet Connect Sharing
- [Windows 8, 7 or Older] Right Click on available network and select*Properties*and go to*Sharing*Tab and checkedAllow other network users to connect through this computer's Internet connection
...
Click to expand...
Click to collapse
Hi smartymcfly,
Thanks for the info. It seems step 3 above is to turn the laptop into a wifi hotspot. However, In my case the laptop is already visible throughout the whole network because it's attached to the router via an ethernet cable. The router gets its internet from the USB port attached to a smart phone and all devices attached to the router.
Based on your instruction (step 2) is to connect to a vpn. I will try to run Hotspot Shield on the laptop to see if that helps. My router is an Asus wl-520gu running DD-WRT so I think it has builtin VPN server, I will try that too.
By the way, did you get your Plex Server to work without T-mobile upsell? Thanks
slick3r said:
I ran into the same problem. Plex Media Server would not work on T-mobile tethering. I tried Network Spoofer and used Redirect Traffic Through Phone and give it the ip address of the the laptop that hosts Plex Media Server, it didn't work. Even the browser on this laptop would bring up the T-mobile upsell page. It seems this feature would simply let everything pass through the phone.
Any other suggestion?
Here's my setup
An LG phone with T-mobile LTE attached to my router via USB tethering. The router then serves every device, wired and wireless, on my network. Roku and all PCs works fine if I change the User Agent of the browser. Only the Plex Media Server would cause T-mobile to bill the traffic against the limited 2.5G tethering, the rest got billed against the unlimited data plan.
Click to expand...
Click to collapse
This might not be directly related but here is a little something I learned....
I have PMS with a VPN. There are a few things you need to set up before you can get it to work. (Also works for vudu)
Basically, the VPN won't work because it needs access to a few IP addresses that it can communicate directly with the myplex servers but not through the VPN. I did tons of packet sniffing to figure these IP addresses out..
What happens is, if you are connected to the VPN, ALL outgoing traffic goes through the VPN and the Plex servers don't understand where that traffic came from and will block it. If your server is reported as being at one address and the traffic comes from another, that makes it look like something is spoofed.
If you have a firewall or VPN that can separate your traffic, I have the IP addresses for you.
The good thing is, the IP address ranges that you'll input, don't effect how your channels are retrieved; meaning that you can still get international channel content from channels like BBC iPlayer or CBC.
I had to use a very special feature on my firewall called ISP Redundancy and route traffic to certain IP ranges directly to the source. This also helped with Verizon FiOS throttling stuff like Netflix and Vudu.
Sent from my Nexus 7 using Tapatalk
abuttino said:
This might not be directly related but here is a little something I learned....
I have PMS with a VPN. There are a few things you need to set up before you can get it to work. (Also works for vudu)
Basically, the VPN won't work because it needs access to a few IP addresses that it can communicate directly with the myplex servers but not through the VPN. I did tons of packet sniffing to figure these IP addresses out..
What happens is, if you are connected to the VPN, ALL outgoing traffic goes through the VPN and the Plex servers don't understand where that traffic came from and will block it. If your server is reported as being at one address and the traffic comes from another, that makes it look like something is spoofed.
If you have a firewall or VPN that can separate your traffic, I have the IP addresses for you.
The good thing is, the IP address ranges that you'll input, don't effect how your channels are retrieved; meaning that you can still get international channel content from channels like BBC iPlayer or CBC.
I had to use a very special feature on my firewall called ISP Redundancy and route traffic to certain IP ranges directly to the source. This also helped with Verizon FiOS throttling stuff like Netflix and Vudu.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Hi abuttino,
Thanks for the info. I'm ordering a new, more powerful router and should have it by tomorrow. I will be using DD-WRT firmware on this new router. DD-WRT should have builtin VPN and firewall. I've been reading on the firewall features, and it seems that it allows routing traffic both ways based on ip addresses. What I'm not sure about his whether or not the routing is running inline with the vpn or can be set to run parrallel so we can have some traiffcs encrypted and some are not.
So for the exception to the IP addresses that need unencrypted communications, do they require both ways (from internet to Plex and from Plex to internet) or just one way?
They need to run in both directions. I'll give you the IP ranges when you are ready, but be prepared to run wireshark to sniff out more IP addresses if myPlex doesn't connect
Sent from my Nexus 7 using Tapatalk
abuttino said:
They need to run in both directions. I'll give you the IP ranges when you are ready, but be prepared to run wireshark to sniff out more IP addresses if myPlex doesn't connect
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Hi abuttino,
I bought an Asus RT-N66U thinking I was able to use Android usb tethering (Asus said that it could) but I haven't been able to get it going. I must be able to use this router with usb tethering first before configuring VPN. Thank you. I will keep you posted.
slick3r said:
Hi abuttino,
I bought an Asus RT-N66U thinking I was able to use Android usb tethering (Asus said that it could) but I haven't been able to get it going. I must be able to use this router with usb tethering first before configuring VPN. Thank you. I will keep you posted.
Click to expand...
Click to collapse
Does the RT-N66U have a server and dlna function that can be used with Bubbleupnp?
slick3r said:
Hi smartymcfly,
Thanks for the info. It seems step 3 above is to turn the laptop into a wifi hotspot. However, In my case the laptop is already visible throughout the whole network because it's attached to the router via an ethernet cable. The router gets its internet from the USB port attached to a smart phone and all devices attached to the router.
Based on your instruction (step 2) is to connect to a vpn. I will try to run Hotspot Shield on the laptop to see if that helps. My router is an Asus wl-520gu running DD-WRT so I think it has builtin VPN server, I will try that too.
By the way, did you get your Plex Server to work without T-mobile upsell? Thanks
Click to expand...
Click to collapse
Sorry for the untimely response...
in step 2, in your case you would need to connect your router to VPN
or
Connect computer to VPN, create hotspot and have your chromecast connect to newly created hotspot but this way would defeat the need to use the router. This the way I have it. There is also an app named klink that may allow you to connect phone to VPN and push all traffic through VPN but I do not know how well it works or if it will work with chromecast.
slick3r said:
Hi abuttino,
I bought an Asus RT-N66U thinking I was able to use Android usb tethering (Asus said that it could) but I haven't been able to get it going. I must be able to use this router with usb tethering first before configuring VPN. Thank you. I will keep you posted.
Click to expand...
Click to collapse
You may need to update the routers firmware. Or install one that will allow it.
http://support.asus.com/FAQ/Detail....DB9-CC0E-5F67-85F7D3FB48E4&m=RT-N66U+(VER.B1)
"B. Update the firmware to version 3.0.0.4.268 or later"
http://www.flashrouters.com/routers...router-tomatousb-router-privateinternetaccess
If you use privateinternetaccess for your VPN their is a Tomato firmware customized for it Tomato Version:*K26VRT-N
It lists the firmware.
http://www.flashrouters.com/tomato-firmware-router-information
https://gist.github.com/joshenders/3941269