German Keyboard setings for English AKU3.2 Roms - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hi,
I just installed Molski's AKU3.2 Rom and have big problems making my german keyboard work because the old "Locale" Registry key which did set the keyboard in AKU2 Roms, doesn't work anymore.
I already found out that it has something to do with the "keyboard layout/Preload" settings which are bound to an IME. Problem is these AKU3.2 Roms have only English IME Layout's installed (309) no German's (307).
Is there still a way to make the german keyboard work? I think there must be a way because the HTC Hermes has exactly the same keyboard as the wizard and it is shipped with a AKU3 Rom.
But as I have absolutely no clue, how to get this working it would be great if some registry geniuses and rom specialists could help me.
Thanx a lot for any help on this subject.

search for hadesgermanlanguagepack there is everything you need

Here it is. Just install and it is OK. I´m using also Molski 3.2

Softkeyboard still english
The hades language pack works great except for one thing: I still have an english softkeyboard althouth the hades language pack says that it also changes the softkeyboard. Do you use any thirdparty keyboard software with molski's AKU 3.2 for having a german keyboard layout for the softkeyboard as well? Or is there any special setting or registry key which changes this.
Thanks for your help.

Molski's AKU3.2 + hadesgermanlanguagepack
hello papamopps,
i too isntalled the language pack and after that nothing works... phone boots up, i can enter pin, then enter sim pin and everything hangs...
you still have no problems?
i'm trying actual to restore the phone...

it seems that the problem is not the language pack, after resetting, the phone still have these problems after installing some software but not the language pack... hm

Sorry.
Sorry, it was my falt. The language pack only set everything for the qwertz-keyboard. but not the softkeyboard. Sorry. That ist still english

I use Resco Keyboard Pro now
Yes I also found out that the Hades language Pack does not set the softkeyboard.
After much research it seems that there is no way to change the softkeyboard unless someone has found the needed rom files from a german rom but it doesn't look like althouth someone has tried with SKTools.
So now I'm using Resco Keyboard Pro which allows me to choose the softkeyboard layout and set it to german. Works great but the downside of it is that it's not free software.

Related

how to flash SX66 with german T-Mobile Firmware?

Hello to all,
knows someone how i can upgrade my Cingular Siemens SX66 with english Keyboard to a german MDAIII without Camera but with black berry client and english keyboard layout drivers?
I see many things about how to, but i don´t understand it really. (my english and my technical knowhow is too bad) When I find a solution that works, i would like write a how to in german so that another users can explain that too..
best greetings
joy.d
P.S.
it should not be free, i will donate that, Paypal is present ;-)
Best greetings
Joy
:shock: :evil: :wink:
ok. now i have flashed t-mobile firmware in german and it works.
but how i can change the keyboard layout back to english qwerty
drivers?
and how i kill the t-mobile logo when i put on the SX66? ;-)
we dont have a file for german rom English Keyboard in:
ftp://xda:[email protected]/BlueAngel/Localized_Keyboards
There is a tread somewere on Keyboards and not sure if wiki (tweaks) has the hack for that, its a reg key you need to change.
Thank you for the Info. ;-)
so i must search only for a registry tweak to change the driver from german Keyboard layout (qwertz) to english Keyboard layout (qwerty) ?
I must not use the Cab Files in
ftp://xda:[email protected]/BlueAngel/Localized_Keyboards ?
I think i must change only the driver for the mechanical Keyboard ?
the soft keyboard is ok with qwertz. But at the mechanical Keyboard
i cant change the Letters only with a Edding waterproof marker ;-)
Puhh.. Heavy.. that all.
when i finished, i write a documentation in german ;-)
and when it´s work than german people´s like me
(bad english) are welcome to ask me how to ;-)
Not all that hard,
read
http://forum.xda-developers.com/viewtopic.php?p=80204#80204
You have 2 Keyboards
Hardware (Based on the rom, (thus now in german) change with the reg tweak to English)
Software (Based on the rom (now in german) but you can load a external one which you will not need.

French rom to english

hi I got a french qtek 9100. I want to flash it to english rom but keep the french keyboard maping. can someone help please.
try this ROM it work fine
RUU_Wizard_1050412_WWE_101_11210_WWE.exe
flash with any english rom you like, then create into \HKCU\ControlPanel\Keybd\ new String value caled "Locale" with the value of "040C", and you'll have french laoyout. enjoy.
IT DOES WORK PERFECTLY!
Dear dddrko,
Chapeau!
your solution works perfectly even on my Qtek 9100 with WWE ROM 1.6.7.1, indeed with french HW keyboard.
It is the perfect answer to a number of patches (including aekmap, which misses a complete french keyboard template as far as i know).
Two additional comments:
1. if you want the settings with Totalcommander to survive a softreset, remember to exit totalcommander before the Softreset;
2. the graphical keyboard on the screen remains in qwerty style (perfect to me!)
THQNKS QGQIN!!!! ;-)
Not working
Hi all,
I wanted to keep my french keyboard layout with English rom.
I tried as you described up there, nbut it doesn't work.
ROM : 1.6.7.1.WWE from the xda ftp site.
Thanks for your help
Hi
I confirm this does not work
the slide keyboard is still querty and not azerty
Anyone have other solution
cheers
Please i need the rom too please link me to the download for the eng rom file for vario.
Thanks.
sorry, i have to add that after the move to the 2.8 rom, it doesn't work anymore (at least to me...) sigh...
Hello, sorry to answer to myself:
it works correctly with ROM 2.8, BUT IT IS ABSOLUTELY FUNDAMENTAL THAT, AFTER YOU HAVE CHANGED THE REGISTRY WITH TOTALCOMMANDER, YOU SOFTRESET BY KEEPING THE POWER BUTTON PRESSED FOR 5S! THE STYLUS IN THE SMALL HOLE IS NOT ENOUGH!
I believe this explains a number of problems that various people had...
Hi
Oki it works after following the procedure
Thanks again pzucchel you ve right

I want my German keyboard map on an English Rom - Please help

I updated to the I touch thing and now I have a English rom on a german hard keyboard the Z and the Y are in different places and that confuses me. I am fine with the english language I just want it set up so it matches my hard keyboad. I tried the language and region settings but its still inverted.
Any way to fix that?
GReeitngs
I use resco keyboard on my english herald with a spansih keyboard. It has german keyboard too.
exxi said:
I updated to the I touch thing and now I have a English rom on a german hard keyboard the Z and the Y are in different places and that confuses me. I am fine with the english language I just want it set up so it matches my hard keyboad. I tried the language and region settings but its still inverted.
Any way to fix that?
GReeitngs
Click to expand...
Click to collapse
Yes, the same I would like to have on my german device with the WWE Rom - any help?
Regards, Tommy
this is in the wiki
http://wiki.xda-developers.com/index.php?pagename=Changing_Device_Language
hope that helps
Good, thanks
But hoe does it works. Do I have to enter a new entry? Because I do not have a entry named "Locale" - I'm using the Resco Explorer. Can you please help?
Regards, Tommy
make a new entry it works then, I bricked my Herald updating to touch Flo 2

English ROM with qwertz keyboard

Hi. I'd just bought HTC touch pro2 and I believe it's for the german market. It has qwertz keyboard. It was flashed with WWE 6.1 ROM ( as far as I can see it's official ROM not cooked) When I press y key it turns out z, symbol keys are all mixed up... I tried keyboard mapping software, but got messed up... and gave up. I need help...some people on other forums suggested that I can flash it with german ROM, but I don't speak german. Anyway, is there a way to fix it in my present software (except keyboard mapper) or can you tell me what to do...maybe I can try cooked ROM in english with qwertz keyboard view? If you can reccommend me any... Thank you in advance (sorry for my english)
I'm using a german Touch Pro 2 called MDA Vario V. When I'm using an english ROM (mostly energy ROMs) I change 2 Registry-Keys and my Keyboard works right with qwertz-layout and all symbols.
change in
HKLM\Software\Tegic\eT9\Ime\KeyboardLayouFiles
eT9.Rhodium.wwe.kmap.txt
to
eT9.Rhodium.0407.kmap.txt
--------------------------------------------------
and in
HKLM\HARDWARE\DEVICEMAP\KEYBD
change
"CurLang" from value="1033" to value="1031"
hope it helps
greetings
Spikee
Qwertz/qwerty problem solved.
Spikee Thank you very much for the advice. It works great!!!
I have tried these Regedits on my Vario V as well, and while it does fix the Y and Z
issues, there are still some problems. The only way to fix the issue is to replace the included eT9.Rhodium.0407.kmap.txt
file with one that is from an actual German TP2/Vario. Only then did the keyboard act the way to should.
Seems the stock eT9.Rhodium.0407 file from the WWE ROM is not fully compatible
with the T-Mo DE Vario, which has certain KB mods. You can find links to the replacement
file here, just search around some more.
yes, this solves the problem. thankx

keyboard layout problem

i've flashed my x1 with a dutch rom, but it has AZERTY-layout for the keyboard, my phone has QWERTY. can I somehow change this? Or has anyone got a dutch ROM with QWERTY layout?
not really worth a new thread, already tried some searching...?
Mod edit: not rom dev related, moved to general
yes i did, and haven't found any usefull things that work for me, so i started a new thread...
I would associate AZERTY with Frensh roms, not Dutch ones
which one did you flash? something like this should be described in the rom des
q: are we talking about hw keyboard or sip?
for hardware read here
best
it is a belgian phone, and here we have azerty and also qwerty, both with dutch software on it. But the belgian ROM that i can find is azerty, not the one with qwerty...
edit: it appears to be a ROM with dutch language and franch keyboard layout, the value in the registry was 1036
MZStannY said:
it is a belgian phone, and here we have azerty and also qwerty, both with dutch software on it. But the belgian ROM that i can find is azerty, not the one with qwerty...
edit: it appears to be a ROM with dutch language and franch keyboard layout, the value in the registry was 1036
Click to expand...
Click to collapse
so did that already solve it or not?
yes it did! just look up the right keyboard layout code, change it in the registry, reboot and it is all set thank you very much!
fantastic, glad to hear it
enjoy

Categories

Resources