hi ive recently inherited an XDA IIi and ive inserted sim card and it cant connect......says there isnt any service or nething but the simcard does work in my sda 2s (which i also got given lol) any ideas????
Have you installed Radio 1.04?
downloading as we speak.....will post a result
phone still not working >.< any other ideas????
Have you cleaned the metal contacts of the sim card with some cleaning oil?
i have an o2 xda iis as well as the 2i, the sim works fine in the 2s so its not the sim
Related
Hi,
I have a TyanII bought in Dubai with English Rom 1.56.405.5 and Radio 1.27.12.11 and it have been working perectly for two months on the Sweden 3 network.
As of yesterday I am not able to connect to the network (I have tried with my other 3 SIM card with no luck . also I have tried the TyanII SIM card in my Treo750 and it still works)
Using the SIM-card app I can read contacts on the SIM card so the phone can read the SIM card.
I have also tried selecting the 3 network manually and both soft and hard resetting the TyanII with no luck.
Anybody have had the same problem and/or a clue on how to solve it?
Please advice.
Thanks Hakan
------------------
Tyan II
Treo 750
Hi everybody!
They have given me in the company a vodafone ´s TyTN II and I have liberated her following the instructions that exist in the Post created by Olipro in:
http://forum.xda-developers.com/showthread.php?t=375583
And also I have tried with the instructions that exist in the Post created by jockyw2001 in: http://forum.xda-developers.com/showthread.php?t=396922
Everything has gone genially the machine is unlocked now don´t work the Sim Card of Vodafone. (I have tried with cards of Movistar, Orange and work right, vodafone will have tried like with 5, none was going (it puts me " inserts SIM card ").
I have loaded as 4 or 5 ROM's without problems (Official, vodafone original, cooked ROM's) and nothing, it continues going out the mesaje Insert SIM card
Now this one with the SPL-1.0 Olipof.
I have looked for information in Xda but I do not find anything.
I have tried of putting the HardSPL v3.28 for if the flies and nothing.
Help, please!
Thank you,
Greetings!
Sounds like you need a new SIM card. Try your VODAFONE Card in another phone and see if it works. Contact Vodafone for a replacement.
I have tried the card with other phone and it works. Now I´m working with it card in a unlocked HTC P3300 and run right.
Now I have tried with six diferents vodafone card and none work. the phone say "Insert SIM card"
Looks like your Vodafone SIM cards are still the older 5 volt standard than the (these days) common 3.5 volt
Insert SIm
Hi I had a similar problem (SIM card missing when inserted Vodafone SIM card. I asked Vodafone to send me anotherone, that worked. My old SIM still worked in my Blackberry.
Good LUck
Richard
Junner2003 said:
Looks like your Vodafone SIM cards are still the older 5 volt standard than the (these days) common 3.5 volt
Click to expand...
Click to collapse
I check card on other vodafone Kaiser and work.
Thanks!
richardracer said:
Hi I had a similar problem (SIM card missing when inserted Vodafone SIM card. I asked Vodafone to send me anotherone, that worked. My old SIM still worked in my Blackberry.
Good LUck
Richard
Click to expand...
Click to collapse
Tomorrow I will call to vodafone and will tell him the problem.
I hope that vodafone change it on warranty!
Thanks Richard!
Hey guys...I sold my Tilt and they buyer said when they inserted their SIM it wouldn't recognize it. I flashed the newest Hyperdragon ROM before I shipped the device, and everything seemed to be working fine. The buyer went to ATT store where they tried other SIM cards, but none worked in the Tilt.
It worked fine with my SIM, which I'm using now in my Fuze. Any ideas what would be causing this? Thanks
i have the same problem too. i'm new to this kaiser/tytnII.
i bought it used from a guy. at first i was able to use my simcard on it. But after using it for 2-3 days, the phone failed to detect my simcard.
i tried with other simcards and it worked fine.
* i think the previous owner flashed with hyperdragonIII ROM, when it boots it says hyperdragon III omnia
Had the same problem. I take my sim card out of my blackberry and put it into my tilt and it recognizes nothing. I take tthe sim out of the tilt back into the Blackberry and works perfectly. I flashed Hyperdragon III ralpheal and blackstone. I finally went back to an at&t based one. Originally when I had dutty's rom or Schapp the sim worked fine
i have just recently bought a unlocked tilt (i don't think it was ever flashed before because the seller didn't know whats flashing)
however, at first, it couldn't read my sim card at all even though my sim works perfectly on my wing. so i took it to a cellphone place across the street and their sim card worked on the tilt, in the end, i just had to pay an extra 20 bucks to get a new SIM card. it is also a better idea to flash without the sim card in the phone!
cbbplanet said:
i have just recently bought a unlocked tilt (i don't think it was ever flashed before because the seller didn't know whats flashing)
however, at first, it couldn't read my sim card at all even though my sim works perfectly on my wing. so i took it to a cellphone place across the street and their sim card worked on the tilt, in the end, i just had to pay an extra 20 bucks to get a new SIM card. it is also a better idea to flash without the sim card in the phone!
Click to expand...
Click to collapse
True, I always notice better reslults flashing without SIM and microSD intalled.
I don't know what happened, but the buyer emailed me and said they went to another ATT store and got it working. I'll see if I can find out what the ATT rep did to make it work...
Ive just unlocked my XDA IIi works fine thankyou very much only problem whatever sim card I put in still says o2 any way of removing this?and showing what sim card is actually in there?
[Mod Edit: Please remember to use a descriptive title]
This picture always will be It is built in ROM.
can do remove
when i do hard reset i choose corporate version potthe pin 0506 and o2 aplication not been installed
Problem Solved.
It appeared to be a hardware problem afterall. The problem was in the solders of the sim-card-holder.
I have the following problem with my Kaiser.
It happened for a second time.
First time was about an year ago...
Suddenly the phone stops to recognize my SIM Card. It says "Sim Card Missing".
When I put my SIM in another phone it works just fine.
When I put another SIM card in MY phone - it works too.
The only thing that does NOT work is MY Sim Card in MY phone .
Last time I tryed to change it for free by my operator, but there was the same situation - MY Sim Card worked in every phone in the operators shop, except mine and they said that I must pay for the new card. So I did and the new card works just fine since now.
First time my Kaiser was with the Stock Rom 6.0.
Now it is flashed with Stylez Black 6.1 Rom.
That`s why I don`t think the problem is ROM related...
Anybody have had the same problem ?!?!
Is there any way to fix it without paying for a new SIM card ?
Thanks in advance.
/sorry for my English /
It can be a flex problem, try to search "no sin card message" . There are many threads situación this issue.
Sent from my Circus, powered by the madness of my HD2