Need BA Driver... - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I've just upgraded my BA using Helmi Upgrade. Everything is working as usual except that my BA need a driver to get connected to computer.
I've searched the installation directory, and found no driver assosiated with this.
could someone help me plz...

your computer is looking for "Generic RNDIS Blue Angel"? had that same problem but after flashing Helmi 3.2... it just happened one day. not sure what i did to correct it, but some of these did the trick:
*changing USB ports
*deleting partnership on PC
*reinstalling activesync 4.2
(repeat as necessary)
really don't know which of these work, but what i did not do was i did not hard reset my BA, didn't even change anything on the BA. hope this is of help

andy_v4 said:
I've just upgraded my BA using Helmi Upgrade. Everything is working as usual except that my BA need a driver to get connected to computer.
I've searched the installation directory, and found no driver assosiated with this.
could someone help me plz...
Click to expand...
Click to collapse
try these two
it does solve the problem for me

Related

Help ,, can not receving any files from BA to PC !!!

hi
my BA is connected Ok with ActivSync 4.1 (4841)
I cant receving any files from my BA
But I can send files
any one can help me plz :roll:
thanx
I am using WM5
( Ivan v4 R3)
my Device Qtek9090
i cant recieve files from my ba either....
neither can i. haven't tried to search for it yet.
The first thing i can think of is some plugin logout had in his rom to use the ba as a sd card reader.
that was the WM5 Mass storage app... it's on the FTP as a cab I believe
EDIT: Think this is it... WM5 Storage
thats the oem package for the aku 2.3 dev packages, not a cab people can use
Iam still can not recive any files from my BA ,
please help
I am using this room for now :
Helmi AKU3.0 1.2b
WM5
but I am still have the same proplem please help
Abdullah85 said:
Iam still can not recive any files from my BA ,
please help
I am using this room for now :
Helmi AKU3.0 1.2b
WM5
but I am still have the same proplem please help
Click to expand...
Click to collapse
thats strange, U hv the problem on the both roms? what connection u use? is there any firewall? cos I never had this issues on any off my rom.
hi
I thinking it from my PC , cuse I sync with another pc then its work 100%
but I dont hav any firewall in my PC !!
my connection I use : USB cardle
how can I get off that proplem ??
thanks ya Helmi
To generaqlize, you may sync and transfer files on another pc but you can not do it on yours, right ?
If this is the case, so the problem is not in your Blueangel, it is in your PC.
There are few things that you may do:
1. Reinstall Activesync (or install version 4.2)
2. Check your Firewall, Antivirus, and network settings.
3. Reinstall Windows and all should work
xplode
xplode said:
3. Reinstall Windows and all should work
xplode
Click to expand...
Click to collapse
good one
but it should be used as a very last resort.
Yeah, thats why I wrote it as option 3

RNDIS BLUE ANGEL driver?

bit of a problem here... my pc crashed and i'm forced to use a new one... after connecting my BA using the cradle, my pc recognized the new hardware but was not able to install the driver for RNDIS BA... tried using the companion cd but the driver is not included there... already googled for it on windows.com and any other site i can think of but still cant locate it. d/led from ms.com the RNDIS USB kit 2005 but have no idea how to use it, the driver is not also in there. btw, the pc i'm using is not yet on SP2 so AS 3.2 is installed here.
so i used a laptop, upgraded to [email protected] and was able to install AS 4.2. connected my BA there and still cannot install the RNDIS for BA on laptop also... how come? do i have to downgrade first to 2003 so that it can be installed then upgrade back to wm5? hope someone can help me, or at least point me in the correct direction. thanks
The RNDIS driver actually is in the BA itself. Connect ur device with PC. Wait 4 a pop-up from bottom right " Your new hardware installed and ready to use". Then it will connect to ur active sync... You Hav to wait for few sec(depends on your pc performance) for it to install the driver.
If it won't work try uninstall the old driver then reconect
GiNkAnO said:
The RNDIS driver actually is in the BA itself. Connect ur device with PC. Wait 4 a pop-up from bottom right " Your new hardware installed and ready to use". Then it will connect to ur active sync... You Hav to wait for few sec(depends on your pc performance) for it to install the driver.
If it won't work try uninstall the old driver then reconect
Click to expand...
Click to collapse
actually the pop up window will say there is a problem with your hardware and it is not installed and your new hardware will not work properly... not sure why, i didn't change anything in my BA...
I guess you installed ActiveSync 4.x.
Try this: open the devicemanager and selected the device not installed. right click and select update driver, now guide windows to look in C:\Program Files\Microsoft ActiveSync\drivers and it should detect the driver.
MCSchermer said:
I guess you installed ActiveSync 4.x.
Try this: open the devicemanager and selected the device not installed. right click and select update driver, now guide windows to look in C:\Program Files\Microsoft ActiveSync\drivers and it should detect the driver.
Click to expand...
Click to collapse
still can't fix the problem... FOund new hardware wizard says hardware not installed because wizard cant find the necessary software. will try it out later when the laptop comes home... whay puzzles me is that this never happened before.
hi
istall this driver
hi i miss the attachments..try dis one
meehaa said:
hi i miss the attachments..try dis one
Click to expand...
Click to collapse
thanks meehaa, i downloaded that file but when i try to redirect the wizard to where the .sys file is, it won't recognize the file...
also tried to direct the wizard on all folders inside c:\windows hoping to get lucky but still no dice...
is it the device itself that has the problem? i can easily downgrade to 2003se and upgrade but since i'm not sure it will work, i'll just screw myself
I had the same problem
after rcoganizing it doesnt istall the driver
so install RNDIS
and after that you need to install this one too
try it
meehaa said:
I had the same problem
after rcoganizing it doesnt istall the driver
so install RNDIS
and after that you need to install this one too
try it
Click to expand...
Click to collapse
sorry for the late reply... but after posting my last msg i got pissed off and reformatted the pc.. thank goodness there's such a thing as norton ghost after SP2 upgrade the pc was finally able to recognize the BA. but thanks for your help meehaa, i'll try your fix on the laptop since i have the same problem there. hopefully that will fix it without needing a reformat
Windows XP Generic RNDIS Driver
MCSchermer said:
I guess you installed ActiveSync 4.x.
Try this: open the devicemanager and selected the device not installed. right click and select update driver, now guide windows to look in C:\Program Files\Microsoft ActiveSync\drivers and it should detect the driver.
Click to expand...
Click to collapse
Thanks for the tip... It works great!
Hello i have same problem, and now fixed. You just need to Update Your ActiveSync to 4.5
View attachment ActivSync4.5setup.rar
izulthea said:
Hello i have same problem, and now fixed. You just need to Update Your ActiveSync to 4.5
View attachment 476500
Click to expand...
Click to collapse
Are these drivers you are looking for...

Problems with ActiveSync and wm 6

Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.
Everything is fine for me, are you sure that you flash the rom correctly as ordered ?
Sync problem
often can`t detect pda synchronitation . it`s show sync problem . Any way to fix it ?
I told you I don't have any problem which mentioned may be you have to reflash your rom, and start from the beginning.
Or first, you can delete your pairing connection with the pc, reinstall your active sync. And try to pair again. If you said "often", I hope this is not because of your hardware problem.
make sure your device is powered on ( the back light is on)..i also get it some time (only if i shut it by pressing Power Button at top)
Himalaya's USB Port is allergic to hubs
Don't try to use an USB Hub to connect the Himalaya to your PC. Always use a direct connection. This solved the problem for me.
...
Hi,
urbstar said:
Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.
Click to expand...
Click to collapse
Got exactly the same problem, since upgraded to WM6 (Tofclock Fresh ROM) Activesync never finds the PDA. Tried really everything possible, doesn't work. But 'cause there are some beautiful tools like WM5Storage or PIMBackup I don't care about ActiveSync.
May be its - as mentioned here - the USB Connection over USB Hub. But it's an internal one in my case so I can't proof.
And I don't think that the workaround for this problem is a ROM-ReFlash 'cause everything else works fine.
So long
HonkBB
i have same sync problem
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
i have reflashed 4 times now and still no good.
any ideas???
newquaymarc said:
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
Click to expand...
Click to collapse
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...
stupiddog said:
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...
Click to expand...
Click to collapse
cheer for reply but no cradle connected direct to my laptop
gonna have to go back to 2003 se till i hear of solution
shame xda runs great with wm6
I just want to ask you about active sync which version did you use ?
selangkahlagi said:
I just want to ask you about active sync which version did you use ?
Click to expand...
Click to collapse
thanks for replying
im using active sync 4.5 with xp pro all has been ok till this upgrade
I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck
selangkahlagi said:
I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck
Click to expand...
Click to collapse
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on
newquaymarc said:
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on
Click to expand...
Click to collapse
If you had old splash screen, big possibility you didn't do the last step
selangkahlagi said:
If you had old splash screen, big possibility you didn't do the last step
Click to expand...
Click to collapse
i did do it but dont think it ran correct, is it ment to run on 2003 se?
newquaymarc said:
i did do it but dont think it ran correct, is it ment to run on 2003 se?
Click to expand...
Click to collapse
did you do this step
hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
hi
yep done all that, NO-YES-YES i think the prep work before upgrade did'nt work..
maybe i need to goto wm5 then wm6, but wm5 was too slow for me to use.
a lot of laptops actually have one set of usb ports that are registered as a powered hub and often these don't really have enough power across all the ports... jst an idea...
active-sink!!!!!!!
hi all xperts,
lemme start with my Thanx to Tof the great and Helmi who have made this possible for the good ol' Hima..
Now i need some help -
I installed this package close to a month back with all instructions point by point.
Activesync was the problem..
Today i thot i'll increase the storage space - ran the unlock and then realised the Hima Doc tool is a exe file and i'll hv to have a valid activesync connection before i can get that worked.
Then i thot, i'll reload WM6.0
Again, started in Boot loader - Got the Serial Screen with v1.06 in bottom, connected my device to run the software -
I'm redoing the flash now - wish me luck guyz!!!!!!!!!!

Big Problem?

I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Drake008 said:
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Click to expand...
Click to collapse
I'm using a Vista PC.
After the Radio update to 1.15 the error described above is not to go away yet.
What to do, I'm nearly in tears.
Finally I got it back but with an old Romupdate from T-Online. Is there someone who got the QTC 9090 update (latest one)
That was fast..
im glad you solved your problem.
i think someone here has it.
just post what you need and make it as a title for others to read in the digest.
Im not a expert but is vista the problem??
Most likely.
Failed MDA II flash with vista notebook
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
mda3newbie said:
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
Click to expand...
Click to collapse
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
mda3newbie said:
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
Click to expand...
Click to collapse
In vista i dont know...sorry for my late reply too.... in XP u must kill ActiveSync process called wincecom.exe. in vista, maybe u have to kill the Windows Mobile Device Center....i dont know...
Dont forget, put the Qtek 9090 in Boot Loader Mode (Pressing Power Button + Record Button + Reset), maybe will appear USB and u can format the device.
If this does not work, try on Windows XP....Find a friend with Windows XP and ask him to use his PC only to do that.
Maybe somebody in forum have the Windows Vista and can help u....
Sorry my terrible english....
Sjogos said:
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
Click to expand...
Click to collapse
hi guys I tried the step by step process and when im enterin( Task 28 ) then pressed Enter -
Invalid command : Task28
For a help screen, use command ? or h
does any one know where the problem is??
Try this
Downlaod the XDA IIs .exe file and run it - no need to put into USB mode
http://www.o2online.ie/wps/wcm/conn...es+&+accessories/Xda+Range/Software+upgrades/
this should reset to factory default (o2)
it runs on vista too
I am not 100% sure it will work but worth a try
diesel_dog said:
Im not a expert but is vista the problem??
Click to expand...
Click to collapse
Yes, i know my reply is late but the problem ist 100% Vista! i Tryed 2 ours with vista...then i decided to format my pc and to install XP. At the first try it worked!

sync failed

I`ve installed WM 6.5 in my Qtek 9090, and when i put in dock to syncronize with my pc, said that the USB port is no longer availabile, chose another way to syncronize, or install a synchronazation software from the getting started disc... but i dont have this disk. what can i do to sync my phone with pc?
first of all, perform a hard reset by pressing power+reset+camera+record, in the menu that appears, set
Enable Kitl NO
Format Storage YES
Clear Registry Hive YES
using the camera and record buttons, confirm with the mail button.
make sure you delete older sync partnerships on your pc, you need to set up a new one.
if bot those actions did not work, try another usb port or finally flashing the rom again or maybe another rom, there are certain builds out there, that have sync issues, which one did you pick exactly?
Same problem
I have just updated a SPV M2000 to WM6.5 and cannot sync
I have tried a virgin PC running XP and this doesn't communicate. The USB connection is recognised by the PC but neither active sync works nor does the file manager recognise the PDA.
The PDA says that the USB port is a problem.
Can I still reupgrade? Maybe should I try an earlier version?
Is there a "known good" version of WM6.5 for SPV M2000?
Thanks for your help
hi and welcome to the forum.
what rom are you using (build number, chef)?
are you sure you followed the right upgrade procedure to the point? http://forum.xda-developers.com/showpost.php?p=4706441&postcount=2
especially the hard reset at the end is important and might help your case here.
yes, you will be able to upgrade/downgrade to change the rom, as long as activesync 4.5 is installed on a windows xp pc. that brings the needed driver for the device to connect, also if you can't sync.
there are many good wm6.5 roms here, just go to the blueangel rom development section and look at the different releases.
Same Problem sorted
Problem sorted.
Before you replied I tried one of the ROMs you recommended and Eureka.
This forum is really useful - thanks
I wonder if you can point me in the right direction. My real reason for upgrading the Blue Angel was to see if it would run Tom Tom Navigator 7 which needs WM6. It won't. I simply get the answer Program not for this device even though I am now running quite successfully WM6.5.

Categories

Resources