most stable/fewest problems 3.x rom out? - 8125, K-JAM, P4300, MDA Vario Software Upgrading

hi, im new on here and new to upgrading these phones i have a Cingular 8125. so far ive upgraded to the newest cingular rom (2.25.11.1 WWE) I would like to upgrade to one of the newer 3.x roms but still keep it stable and be able to use most programs. i also need to SIM and CID unlock my phone still so any help on that process would be appreciated too. ive looked on here quite a bit and it seems like there are a lot of conflicting issues about SIM AND CID unlcking phones that have IPL/SPL 2.xx (i have 2.25 for both) again...any help on any of the subjects is greatly apprciated!! Thanks in advance,
Corey
::edit:: also ive read about haveing to install cingular settings to get the MMS/SMS to work correctly again. is that for all ROM upgrades other than shipped ROMs? and if it is needed, where can i find it?
sorry for all the questions, im just trying to do this right as a noobie ;-)

wow...
wow.... 122 veiws so far and not single comment :-/ not even to flame the noobie for not noticing the CID/SIM unlock instructions untill immediatly after he posted the thread. ohwell, i will persevere

ive tried them all, but the one that's the most stable so far is Molski's 1st Edition 3.0.0.0 AKU3.2 Rom, in fact its lasted the longest of all the roms I've installed so far. I hope that helps

XSIVSPD said:
wow.... 122 veiws so far and not single comment :-/ not even to flame the noobie for not noticing the CID/SIM unlock instructions untill immediatly after he posted the thread. ohwell, i will persevere
Click to expand...
Click to collapse
People are being nice!
As a noob....instead of asking.....read! If you READ through the threads, you'll notice different people have different experiences with the same ROM. What's stable for me may not be stable for you.
All the roms you may be interested in are all clean roms which means you have to install your carrier settings......do you know what they are? Start with this and until then.....stay with your factory rom............

thanks guys. the CIS/SIM unlock was an oversight on my part, but i figured i would ask since no matter waht ROM it is it seems that a few people have certain issues with it and i was hopeing to kind of get a feeling for which one most of the people are happiest with. i have a .CAB with the carrier settings in it. another option that im thinking about is just waiting untill crossbow is out and seeing if cingular puts it on the 8125 so that i can get it as a OEM rom. I am most likely not going to be doing all the things that you guys are with the wizards, but i am interested in keeping it updated with the best ROM and radio ROM and being able to personalize it. i hate haveing the same thing as everyone else...
::EDIT:: and i've been reading for the last 5 days lol. TMI to digest all at once on here

I agree with Dr P. This is the longest I have stayed with a ROM The Molski 3.0.0.0 very stable.

XSIVSPD said:
thanks guys. the CIS/SIM unlock was an oversight on my part, but i figured i would ask since no matter waht ROM it is it seems that a few people have certain issues with it and i was hopeing to kind of get a feeling for which one most of the people are happiest with. i have a .CAB with the carrier settings in it. another option that im thinking about is just waiting untill crossbow is out and seeing if cingular puts it on the 8125 so that i can get it as a OEM rom. I am most likely not going to be doing all the things that you guys are with the wizards, but i am interested in keeping it updated with the best ROM and radio ROM and being able to personalize it. i hate haveing the same thing as everyone else...
::EDIT:: and i've been reading for the last 5 days lol. TMI to digest all at once on here
Click to expand...
Click to collapse
Okay - now I'll ask you a ? - How do you have a cab of your carrier settings. I would love that.

Concur Molski 3.0 but replace the radio to 2.19 rom to resolve the missed call/frozen buttons issues. Then it's near perfect but for a few apps that need to be resolved by their developers

addicus said:
Okay - now I'll ask you a ? - How do you have a cab of your carrier settings. I would love that.
Click to expand...
Click to collapse
For Cingular download the P_Conn_CWS_APR12_Wizard and rename to zip to cab.
<hint> Keep this on your SC !

thanks for the opinions guys, and thanks for posting that for me doc, my computer has been down for a few days and i couldnt get the file off to send him. im just trying to decide now if i want to use that rom or wait untill the WM6 WWE rom is available..seems like it should be pretty soon.

Dr Puttingham said:
For Cingular download the P_Conn_CWS_APR12_Wizard and rename to zip to cab.
<hint> Keep this on your SC !
Click to expand...
Click to collapse
You are a very kind person Dr. Thank you very much.
Edit: I'm not in need of using it right now so I ask does this include the MMS settings?

addicus said:
You are a very kind person Dr. Thank you very much.
Edit: I'm not in need of using it right now so I ask does this include the MMS settings?
Click to expand...
Click to collapse
Yes sir it does! if you ever need them though you can get them from https://www.cingular.com/support/content.do?page=phone-device-support Complete with pictures for people like me ;-)

In what way is the 1st edition AKU 3.2 more stable than the latest AKU 3.3 that faria just released?

Related

Total Newbie but please help

Ok so I got an o2 xda and I have managed to unlock the phone so I can put my t-mobile sim in.
This xda has never had a firmware upgrade nor do I know about such stuff.
Soooooo, what firmware could I install and how do I do it.
As said total newbie but please help where you can, we where all newbie's once
Numbers that flash up on boot up are....
R 1.10.00
1327.10
1.60.00 wwe
Does this tell you the current firm ware ?
We are once newbie.. but we once do research and learn ourself and not sit and wait. Go read and whever you do not understand, just ask instead of for everything to be fed to you
First try reading clicking on the top left wiki
PMSL, oh thanks, whats a winkie.
So I should just bundle into it flash the wrong firmware then post about how my xda won't go past the boot screen, then you can all sit on your selfrightous pulpit and say you should of asked ?
Well, take a look around this site and find some of the threads from people who had no idea what they were doing but didn't let that stop them. They're not real hard to find these days. It will probably be a simple process, but it may not be. When you're flashing the phone and your PC crashes, you yank the cable out, the battery dies, power goes out, the phone falls off the table, you spill water on it and everything else that I've seen happen, what are you going to do? All the answers are here and they're not hard to find and it's REAL HANDY to know the answers, or at least know where to find them, BEFORE you go off half-cocked knowing just enough to be dangerous. So rather than frying your phone and then coming back here to ***** about it, go read through the threads on flashing, read about what has gone wrong and what people have done about it. People that are a lot better at this than you and me. And this is assuming you even NEED a different ROM. I've tried lots and I'm perfectly happy with the stock T-Mobile 2.26 system. Custom ROMs have all kinds of problems not to mention your warrantee ends the moment you start that flash process and you're not going to find many people willing to help you turn your expensive toy into a smoking paperweight.
Angelus1971 said:
PMSL, oh thanks, whats a winkie.
So I should just bundle into it flash the wrong firmware then post about how my xda won't go past the boot screen, then you can all sit on your selfrightous pulpit and say you should of asked ?
Click to expand...
Click to collapse
Haha.. nice to have you joker around once a while.
If you were to be in the position to bundle in a wrong ROM, I wouldn't recommend you to even flash your ROM, even if step by step instructions are given. When you have confident enough to do your research and ask 'specific' question (of which you can do before you get yourself into troubles). Just enjoy your phone as it is.
Read here for inspiration for step by step instruction.
Why thankyou kind sir, LOL
Well, I'm actually ROTFL and not LOL at this!
(But I'm easily amused!)
Thanks!
I'm just at Heh level, personally. It's amusing but this trend of people with too much money bricking their phones is getting kind of old. See "[Release 1.0 RC1] AKU 3.2 ROM" for the latest blind rush to nowhere. *shrug*....it's not my $400.
Wow what activity we have, ok fook the phone lets just take the p!ss lol.
All it was was my phone was on o2 network but I'm with t-mobile.
OK here's a question, can I flash the t-mobile firmware onto my o2 phoone and get a working result ?
Angelus1971 said:
OK here's a question, can I flash the t-mobile firmware onto my o2 phoone and get a working result ?
Click to expand...
Click to collapse
Yes. Just make sure you get the right Wizard ROM from T-Mobile (e.g. not Charmer, not Universal, etc).
Having trouble downloading the xda tool from the ftp Any other source ?
The t-mobile rom, is it uk friendly as I have read a lot about the us version me thinks.
Which 'tool' are you refering to? Seems alright with me. The xda ftp sites may go down once a while. You may want to retry later.
I'm not sure whats with US ROM. I think the base ROM should be the same for both country, only the Ext ROM is different with different settings for both country. You may install whatever goodies you get from US ROM later.
Anyway, just to make the point clear, why do you want to use the T-mobile ROM?
What is disscus about this thread..?
Xda II (Himalaya) or Xda Mini Pro/S (Wizard)...?
this ROM indicated O2 Xda II (Himalaya)...
Angelus1971 said:
Numbers that flash up on boot up are....
R 1.10.00
1327.10
1.60.00 wwe
Does this tell you the current firm ware ?
Click to expand...
Click to collapse
I belive mine to be the XDA II (Himalaya) (o2 version yeah ?)
I am having problems setting up wap ect and thought that maybe a rom upgrade would not only get rid of the o2 software completly but also have the advange of being t-mobile based from then on as that is the sim i am using.
The tool I was trying to download was to upload/download rom from windows base I think, LOL

Which the best custom Rom for wizard?

Hi
i m lookin to update my rom and now i see there are too many of them here so was wondering which the best rom out of the lot and which ones users will recommend if they have tried any
Thanks
vikramdhani said:
Hi
i m lookin to update my rom and now i see there are too many of them here so was wondering which the best rom out of the lot and which ones users will recommend if they have tried any
Thanks
Click to expand...
Click to collapse
They are all good and at the same time they are all different. My suggestion is that you spend some time reading. I'm aware that their are alot of pages to read but I think in the end it is worth it and besides you will learn tons.
Kirby
The basic description of every single ROM are put are the first post of the threads which describes the ROM... there are no ROMs that is one-size-fits-all... it's up to you to choose which is best for you..
Which ROM
I can honestly recomend Faria's lates ROM 3.2 RC1. It is the one I'm using now.
manfly9884 said:
I can honestly recomend Faria's lates ROM 3.2 RC1. It is the one I'm using now.
Click to expand...
Click to collapse
That ROM is great but it is not available anymore due to people not being able to read clear, comprehensive instructions and going on to trash the thread asking generic ROM upgrading questions and pissing off the author. My recomendation until RC2 of the Faria ROM would be one of Molskis ROMs. Before you think about upgrading ROMs.
Identify if yours is a G3 or G4 wizard
Is your wizard CID unlocked
Have you read and reread all the information, instructions given by the ROM author
Read and reread the threads pertaining to your chosen ROM.
If you do this you will have minimal if any problems. 99% of all problems upgrading are due to people NOT following the instructions correctly.
I don't recommend faria's 3.2 rom if you have linux or a mac and do any tethering to a laptop via usb or bluetooth. DUN connections are no longer available in AKU 3.2..they use bluetooth PAN and so far I've been unable to get a viable connection going...if you are feeling brave linux does have a bluetooth pan daemon called "pand" you can read up on.
wizzzard said:
That ROM is great but it is not available anymore due to people not being able to read clear, comprehensive instructions and going on to trash the thread asking generic ROM upgrading questions and pissing off the author.
Click to expand...
Click to collapse
know of anyone hosting this or anywhere else it is available?
faria's 3.2 rom
i honestly think you should read and reread since this came by a lot of times now. use the search option.
or ask faria himself

Wizard rom Upgrade

Hi,
I would like to upgrade the rom on my Qtek 9100 as getting a hermes seems like a waste of time(not enough new developments) Can anyone reccommend a good rom and provide a link to it? - I cant find farias rom anywhere. I have the earliest revision of radio and os rom avail as I got my 9100 last December.
Please help as I think upgrading ROM would be much preferable to upgrading phone.
P.s do the new roms fix the screen calibration and alarm wakeup problems
Many Thanks,
Darko2006
darko2006 said:
Hi,
I would like to upgrade the rom on my Qtek 9100 as getting a hermes seems like a waste of time(not enough new developments) Can anyone reccommend a good rom and provide a link to it? - I cant find farias rom anywhere. I have the earliest revision of radio and os rom avail as I got my 9100 last December.
Please help as I think upgrading ROM would be much preferable to upgrading phone.
P.s do the new roms fix the screen calibration and alarm wakeup problems
Many Thanks,
Darko2006
Click to expand...
Click to collapse
It is highly unlikely that you will find Farias ROM as he has removed it from the general population. You need to read for about a week or two and after that you may be ready to upgrade your phone. I don't know if the new ROMs fix the problems you are talking about because I never had those problems to begin with.
Good Luck,
Kirby
rkwhyte2 said:
It is highly unlikely that you will find Farias ROM as he has removed it from the general population. You need to read for about a week or two and after that you may be ready to upgrade your phone. I don't know if the new ROMs fix the problems you are talking about because I never had those problems to begin with.
Good Luck,
Kirby
Click to expand...
Click to collapse
Do you have the info on what was in Farias ROM?
I don't want the ROM, but I'd like to see what he was doing. It's a shame that someone had to be an arse and ruin for other people, but then again, it's as a shame that people let people get to them over the interweb.
juanschwartz said:
Do you have the info on what was in Farias ROM?
I don't want the ROM, but I'd like to see what he was doing. It's a shame that someone had to be an arse and ruin for other people, but then again, it's as a shame that people let people get to them over the interweb.
Click to expand...
Click to collapse
The best way to find out what his ROM had in it is to go to the first post in his thread and find the link that will show you his first post in the very first thread about this whole thing. He talks in detail about what the ROM contains.
Kirby
rkwhyte2 said:
The best way to find out what his ROM had in it is to go to the first post in his thread and find the link that will show you his first post in the very first thread about this whole thing. He talks in detail about what the ROM contains.
Kirby
Click to expand...
Click to collapse
I went there and got 404...
darko2006 said:
P.s do the new roms fix the screen calibration and alarm wakeup problems
Click to expand...
Click to collapse
It seems screen calibration is a hardware problem...
I had got this, was forced to visit service center (to replace the whole display). New screen is fine
Vladimyr said:
It seems screen calibration is a hardware problem...
I had got this, was forced to visit service center (to replace the whole display). New screen is fine
Click to expand...
Click to collapse
crap, looks like getting a hemes would be the way to go then.
Is it much better than the wizard? - the only thing I can see different is 3G which I dont really need anyway(I dont watch corporate media or TV)
rkwhyte2 said:
It is highly unlikely that you will find Farias ROM as he has removed it from the general population. You need to read for about a week or two and after that you may be ready to upgrade your phone. I don't know if the new ROMs fix the problems you are talking about because I never had those problems to begin with.
Good Luck,
Kirby
Click to expand...
Click to collapse
Cheers, I have the knowledge to update my rom now, I just need to know a suitiable one with the minimum of hassle and problems with good apps already installed e.t.c. the rom I have now is fully unlocked and ext rom visibe e.t.c. but it is version 1.1.7.5 I hear there is a great speed dufference in the later revisions - is this correct?
darko2006 said:
Cheers, I have the knowledge to update my rom now, I just need to know a suitiable one with the minimum of hassle and problems with good apps already installed e.t.c. the rom I have now is fully unlocked and ext rom visibe e.t.c. but it is version 1.1.7.5 I hear there is a great speed dufference in the later revisions - is this correct?
Click to expand...
Click to collapse
You might want to take a look at what Molski has to offer. He has a fairly clean ROM that is quite stable.
Kirby
juanschwartz said:
I went there and got 404...
Click to expand...
Click to collapse
I forgot about that try it using IE.
Kirby
rkwhyte2 said:
I forgot about that try it using IE.
Kirby
Click to expand...
Click to collapse
The original thread was removed after being trashed by an idiot..
kyphur said:
The original thread was removed after being trashed by an idiot..
Click to expand...
Click to collapse
Dang you are right what a bummer.

No Sound!

hey guys, i unlocked my tilt 2 days ago. since then, i have only been able to place 1 outgoing call, and then i have to restart the phone. this is starting to get very annoying. there is no ringer, no volume, nothing.
Before you tell me to reflash my radio, i did. like 20 times. nothing
Whoever wrote that unlocking program messed up BIG time.....
Halp!
lol. rotfl..haha..sorry man.. just read read read that's all I can say.
why waste your energy typing? if you dont have anything worthwile to suggest, then GTFO
Change your Radio. The radio included in your new ROM does not the right one. do i search and find a compatible radio and it will work
bluemamba said:
Change your Radio. The radio included in your new ROM does not the right one. do i search and find a compatible radio and it will work
Click to expand...
Click to collapse
thx capitan obvious!!! did you read my original post? i tried EVERY radio!!
You're not very polite
Besides, the unlocker worked perfectly for many many many people here, so i would not say that Olipro messed around here.but anyways...
did you reflash the same Radio Version all the time or did you try different ones?? I had Versions with which the same problem occured, no voice, no ringer, no sounds. 1.64.08.21 worked for me
guciodog said:
Before you tell me to reflash my radio, i did. like 20 times. nothing
Whoever wrote that unlocking program ****ed up BIG time.....
Halp!
Click to expand...
Click to collapse
Its really funny how you are the only individual that flashing the radio didn't help. And before you go talking about OLI, jocky and the likes that made the program so you could get rid of the bloat and flash works of art that this forum provides, I'd look inward and see if you might have done something wrong.
You know what, Im gonna make it real easy. If you have a 6.1 rom then you need a 6.1 radio. Same goes for 6.0. However some cooked roms are at$t specific and you have to have a at$t radio. A little more information such as the radio you are using and the rom would be really helpful.
haha simultanuous post and NO, your original post does NOT tell WHICH Radio Versions you tried...
http://forum.xda-developers.com/showthread.php?t=349375
tried every radio on that page.
im running http://forum.xda-developers.com/showthread.php?t=380991
sorry if im a little pissed off, but comments like "haha read read read" and "relash your radio" dont help at all
While we all understand that you're frustrated due to the problems you've been having, there is no need to insult the people who have created these tools.
Please also understand that the more information you give, the more we can help. The other members are just trying to tell you that what you've told us is not enough for us to assist.
You also have to understand that many MANY people ask similar / redundant questions all the time. The answers are usually the same, and thus, some users are more disturbed by these redundant questions than others.
Finally, ask nicely for assistance. No one is required to assist you, so remember that a bit of honey always gets you further than a lump of turd.
guciodog said:
http://forum.xda-developers.com/showthread.php?t=349375
tried every radio on that page.
im running http://forum.xda-developers.com/showthread.php?t=380991
sorry if im a little pissed off, but comments like "haha read read read" and "relash your radio" dont help at all
Click to expand...
Click to collapse
Ok, why did you try to change radios? That rom comes with 1.64.08.21. Did you HR at the "Tap here to align" screen prior to setting up all your apps? Have you HR since this happened to see if it fixed it?
guciodog said:
http://forum.xda-developers.com/showthread.php?t=349375
tried every radio on that page.
im running http://forum.xda-developers.com/showthread.php?t=380991
sorry if im a little pissed off, but comments like "haha read read read" and "relash your radio" dont help at all
Click to expand...
Click to collapse
If ur pissed off at him , why are u impolite to me?
Listen and listen good...
YOU RADIO IS INCOMPATIBLE (means not compatible; not the right one).
Find a Compatible Radio that matches your dam ROM (whatever the f that is) READ READ and READ again..and find it.
There are experts and know 30000% more than u on this site..respect their help or dont post anymore.
Worst case scenario...revert back to your old ROM that work and leave us in peace
@ p1tater-and why would i want to delete all my data?
and 2, if the "experts" KNEW that their unlocker would f-up the radio, why wouldnt they fix it?
guciodog said:
and why would i want to delete all my data?
Click to expand...
Click to collapse
I try and try....... I give up. I'm moving on now. Good luck.
guciodog said:
and why would i want to delete all my data?
Click to expand...
Click to collapse
back up you data...then when u go back to a ROM that works for you...restore them....
sprite back up is a good one
bluemamba said:
back up you data...then when u go back to a ROM that works for you...restore them....
sprite back up is a good one
Click to expand...
Click to collapse
the ROM works perfectly, its the radio thats giving me problems.
seriously im moving on too.
Read the stickys well and you will find you answer.
good luck
Please provide the following information so we can better assist:
Which ROM was installed? Please tell us what it says from Start /Settings / About and Device Information from your phone.
Which SIM unlocker did you use? Jockyw2001 or Olipro?
Are you sure that you've completed the unlocking successfully?
guciodog said:
@ p1tater-and why would i want to delete all my data?
and 2, if the "experts" KNEW that their unlocker would f-up the radio, why wouldnt they fix it?
Click to expand...
Click to collapse
The unlockers have been used successfully time and time again. However, responsibility for it's results lie within your ability to accept failure and to follow through all the steps properly.
Continuing to lay blame on others is quickly making you lose the people trying to help you.
guciodog said:
the ROM works perfectly, its the radio thats giving me problems.
Click to expand...
Click to collapse
Holy Hell. The rom you pointed to came with a radio, that I know for a fact works. Why did you try to change radios? If it didnt work straight out of the box then you have a bad flash and the radio section is bad.
Edit:
I did feel bad for you and decided to come back and help but you wont listen so have fun playing with the nice new shiny brick you call a phone. You could get better reception from 2 cups and a string before I come back to help. I'm done.
_Alex_ said:
Please provide the following information so we can better assist:
Which ROM was installed? Please tell us what it says from Start /Settings / About and Device Information from your phone.
Which SIM unlocker did you use? Jockyw2001 or Olipro?
Are you sure that you've completed the unlocking successfully?
The unlockers have been used successfully time and time again. However, responsibility for it's results lie within your ability to accept failure and to follow through all the steps properly.
Continuing to lay blame on others is quickly making you lose the people trying to help you.
Click to expand...
Click to collapse
1. no idea what my original ROM was, now im running "CE OS 5.219202 (build 19202 dutty's) v6.1
2. i used the olipro one
3. it said "phone unlocked" so im guessing it worked.
im not sure if i stated this before, i was running dutty's ROM for 2 weeks, and just recently (sunday) unlocked it.
for all those telling me to read the stickies, there is only one relevant to my situation, and it tells you to try a different radio. i did that. many times.
if i cant fix it, im selling this POS and getting an iphone

General queries before flashing HTC P3600i

Hi Guys
I have a HTC P3600i in Australia. I had a few queries before I try flashing my phone.
These are my current settings.
ROM Version: 3.00.707.18
ROM Date: 07/24/07
Radio Version: 1.46.30.11
Protocol Version: 32.79.7020.19H
Now I wanted to put Windows Mobile 6.1 into my PDA..
1) Which is the best combination of Hard SPL + Radio + ROM to put onto my mobile. Can you please provide links here.. I got totally lost on the forum..
2) If I flash and something goes wrong, or if later I want to put it back with its original ROM (found on the HTC website), is it possible to do?
3) Any other things I should know before flashing the three things mentioned above
4) Anything else you guys will recommend to put in to the mobile.
Thanks in advance u guys
http://www.trinityguides.info/index.php
idrisito said:
http://www.trinityguides.info/index.php
Click to expand...
Click to collapse
seen that guide.. but does the Hard-SPL contain the ROM also?? can u gimme link to the best stable WM6.1 ROM for P3600i
khandu said:
seen that guide.. but does the Hard-SPL contain the ROM also?? can u gimme link to the best stable WM6.1 ROM for P3600i
Click to expand...
Click to collapse
NO the Hard SPL for P3600i (search for the thread) is only the Hard SPL.
As for ROM's it comes down to personal choice. There is a specific thread for P3600i ROMs that work, that is the best place to look....read...and make up your mind from there.
Andych said:
NO the Hard SPL for P3600i (search for the thread) is only the Hard SPL.
As for ROM's it comes down to personal choice. There is a specific thread for P3600i ROMs that work, that is the best place to look....read...and make up your mind from there.
Click to expand...
Click to collapse
What about question 2??
its tough to get to know all those ROM.. can u suggest a few
thanks
OK:
1. Use the flashing tutorial at the top of the "Trinity upgrading" thread.
2. Flash with a ROM from the P3600I Rom Collection thread in the "Trinity Mobile 6" subforum.
Prob best to just go with the 31XiTNY ROMs as a good start... from there you can either decide to CBF and stick with it or try a few different ones... depends how keen you are on this stuff.
As for the risk of screwing things up, your only risk is first getting HardSPL on... if you can get that on and working fine, then a screwed-up ROM flash won't be an issue, you just start over again.
HardSPL has had over 1000 downloads from this week, and no one yet has reported having trouble flashing their P3600i, so I doubt you'll have any issues I know the first time I got into this I was ****ting myself wondering whether I made the wrong choice, but everything completed fine
Of course, you can never tell what will happen, etc. etc. lol so yeh up to you, but the benefits are definitely worth the risks lol
joncgde2 said:
HardSPL has had over 1000 downloads from this week, and no one yet has reported having trouble flashing their P3600i,
Click to expand...
Click to collapse
Funny you say that when people keep asking for a working HARD SPL for some of the P3600i because it simply doesn't work on all P3600i.
Did you miss that?
Robert
demon83ft said:
Funny you say that when people keep asking for a working HARD SPL for some of the P3600i because it simply doesn't work on all P3600i.
Did you miss that?
Robert
Click to expand...
Click to collapse
4 people out of over 1000 downloads isn't a big percentage. That and the fact that the OP is based in Australia and all of the australian P3600i from HTC work with Hard SPL (as far as we know) put the comment into context.
It is unfortunate that there are some out there who are not able to complete the HardSPL flash, but there isn't a lot that can be done. If you guys are adamant that the phone is a P3600i and the standard WWE ROM lashes ok on it then it should work with the HardSPL from Olipro.
Andych is right...
Plus now downloads are up to 1119 for HardSPL... 4 problems out of 1119 is something like 0.3%... so 99.7% have had NO problems.
I'd dare say that's statistically insignificant, and that the likelihood of this being a problem with HardSPL itself is low... or possibly some P3600i's are incompatible, unfortuneately - either way, if 99.7% of users have had success, I'd say that's pretty much everyone.
Ok..
So for
Hard SPL: I use Olipro 1.30
Radio: I use v1.56.70.11
ROM: any mentioned here on the thread ( http://forum.xda-developers.com/showthread.php?t=399779) recommended 31XiTNY
Is that right??
Also someone was telling me about Soft SPL. He has used it in his Herems. Does that work for us?? and how does it work?
Thanks for you statistics lesson ..
I understand your point of view guys .. but if one day you will be in this 0.3%
and everybody will keep tapping you on the back saying "sorry, it should work.." .. we will see how nice will be me calling you "statistically insignificant"
Robert
demon83ft said:
Thanks for you statistics lesson ..
I understand your point of view guys .. but if one day you will be in this 0.3%
and everybody will keep tapping you on the back saying "sorry, it should work.." .. we will see how nice will be me calling you "statistically insignificant"
Robert
Click to expand...
Click to collapse
Robert....trust me....for 12 months we WERE the 0.3% so we know your frustration. The problem is that most of us flashed the HardSPL 3 months ago and as it is a Flash once operation it is impossible to replicate the errors you are having. The other difficult part is the that the Supreme genius Olipro who gave us the HardSPL is not fully engaged in his Diamond projects so I doubt he has either the time or the inclination to offer any assistance....sad, but that is the way life is.
I will re-read the problems you and the pther couple of psters are having and see if there are any other things you can try. I do remember though that you all had slightly different Error Codes, which is a concern.
Anyway, hang in there, I won;t get a real chance to read and digest the info before the weekend....but I will do it and post back in that thread.
Andych said:
Robert....trust me....for 12 months we WERE the 0.3% so we know your frustration. The problem is that most of us flashed the HardSPL 3 months ago and as it is a Flash once operation it is impossible to replicate the errors you are having. The other difficult part is the that the Supreme genius Olipro who gave us the HardSPL is not fully engaged in his Diamond projects so I doubt he has either the time or the inclination to offer any assistance....sad, but that is the way life is.
I will re-read the problems you and the pther couple of psters are having and see if there are any other things you can try. I do remember though that you all had slightly different Error Codes, which is a concern.
Anyway, hang in there, I won;t get a real chance to read and digest the info before the weekend....but I will do it and post back in that thread.
Click to expand...
Click to collapse
If you wish I can provide IM and desktop sharing so that you can watch how I do it ... maybe it is us who do it wrong .. I am newbie in flashing but I have 10-12 years of PC experience .. so I doubt I can't follow a simple guide ...
PM me when you have 10 minutes and maybe we can sort this out ...

Categories

Resources