Related
i download 2005
and every thing was good but after i tryied to margi the storge with extend rom just white screen and not switch on and cannot upgrade or degrade it agine it 's stop on 3% always in extend rom uograde but ce rom is done and radio no problem i can upgrade it but in extend rom upgrade stop in 3% help me
i think i must format extend rom or resize it to make the device work but i don't know how to format it caz the device not working just white screen and not working and stop in 3 % when update extend rom and i try to formate itand hard reset no solve format but same
try to flash without the extrom "delete the extrom file from the flash directory " and then you will be able to start ur device without the extrom and fix it .
It is New release of HoneyComb Froyo Builds ...
* Working :
- Everything except Camera & BT
- Downloading from market may take long time to start at first time ..
* Features :
- Very Stable & Fast & Smooth Froyo CWM build ..
- Very Fast Wifi with No Dropping ..
- Very Good battery life ..
- Neocore : 25.6 FPS
* Kernel Related issues :
- You may not hear voice during incoming call > Just activate the speaker & deactivate it again to solve this issue ..
- Charging while in android isn't working > You should connect the charger before hitting (haret.exe) ..
-----------------------------------------------------------------
* Installing instructions :
1- Format SDcard To 4 Partitions :
- 1- partition: FAT32 (SDcard / Rest)
- 2- partition: EXT2 (System / about 250 MB )
- 3- partition: EXT2 (Data / about 450 MB)
- 4- partition: EXT2 (Cache / about 100 MB)
* Make sure That all partitions are set PRIMARY ..
2- Extract Package & Copy [npkboot] Folder to root SDcard ..
3- Copy [HoneyComb Build V.3] To root SDcard without extraction ..
4- Run Haret & wait till it ask you to press Volume Down shortly to launch ClockworkMod Recovery ..
5- While In recovery menu , choose " install zip from SD card >>
choose zip from sdcard and select " HoneyComb Build V.3.zip " ..
- Then return back to main menu using " ok " key , Then choose " reboot system now "
6- Run " HARET.exe " & leave it to continue booting into Android ...
** For More info see THIS TOPIC
------------------------------------
** Very Important :
* Please don't install GAPPS after rom installation directly , Otherwise you'll have a serious problems ..
So you must :
1- Install HoneyComb V.3
2- Run the build
3- Restart it
4- Install Gapps
* Attached Kernel is highly overclocked , it may not work with all kovsky devices , so if it doesn't work with you, try to change the overclocking value from 652 to 614 mhz in startup.txt ..
- If it is still not working , replace this kernel with "Turbo kernel" attached to package ...
*********************************************
* Thanks To :
- Neopeek ( For CWM & Many others )
- TiaD8 ( Many tweaks & stuff taken from his builds )
- Highlandsun ( For his libs )
- People made these themes & icons .
- All other persons who i forgot to mention ..
**********************************
DOWNLOAD
^^^^^^^^^^^^^^^^^^
* On Screen Answer interface
* For Keyboard Freezing proplem
**********************************
If you like my work, Please just Don't Mirror my links ..
Don't Forget To click Thanks Button ...
* Installing instructions :
1- Format SDcard To 4 Partitions :
- 1- partition: FAT32 (SDcard / Rest)
- 2- partition: EXT2 (System / about 250 MB )
- 3- partition: EXT2 (Data / about 450 MB)
- 4- partition: EXT2 (Cache / about 100 MB)
* Make sure That all partitions are set PRIMARY ..
2- Extract Package & Copy [npkboot] Folder to root SDcard ..
3- Copy [HenDroiD_V2.zip] To root SDcard without extraction ..
4- Run Haret & wait till it ask you to press Volume Down shortly to launch ClockworkMod Recovery ..
5- While In recovery menu , choose " install zip from SD card >>
choose zip from sdcard and select " HenDroiD_V2.zip " ..
- Then return back to main menu using " ok " key , Then choose " reboot system now "
6- Run " HARET.exe " & leave it to continue booting into Android ...
** For More info see THIS TOPIC
finally.....great work man....!!! download now....
nice work !!!
needo why you delete languages from this ROM?? ( please return choose czech language in Settings )
are the Keypad drivers modules or not ?
RenEdi said:
nice work !!!
needo why you delete languages from this ROM?? ( please return choose czech language in Settings )
Click to expand...
Click to collapse
this build isn't supporting many laguages, but you can use morelocale ( Attached to this post )
djkarl said:
are the Keypad drivers modules or not ?
Click to expand...
Click to collapse
the separate keypad modules isn't included in this package , i think you wan't need it again > i'm using it for more than 8 hours with no keyboard stoppage ..
trying now
Tried it for 2 hours now. I had only one wifi connection lost. But that was the only error. Market works. It's fast and stable LOVE IT ^^
I'll give it a try asap! =)
is AZERTY keymap available ?
can someone make a video on how to Become the process we do start the haret I've done it many times k no can do let us help someone. instructions I pay close attention but nothing.
sorry my english!
tried this for a few hours and the build is quite solid and stable, but with all other android builds ive tried, the keypad freezes all the time for me. froze 3 times so far in 4 hours. guess i still cant use any android build until thats fixed in the kernels. ill try the turbo keernel tosee if its any better
i have a problem, it don't ask me: press volume down
Do you know why that is?
(Sorry for my bad English)
Gameforce said:
i have a problem, it don't ask me: press volume down
Do you know why that is?
(Sorry for my bad English)
Click to expand...
Click to collapse
When you start android and the code is displayed there is the pinguine on the top, wenn the pinguin disapear and the code begin at the top, than press vol down
wi fi
- Very Fast Wifi with No Dropping .. ---- NOT Working for me.. when i try to start wi fi my x1 reboots back in winmo
great speedy rom, very fast!!!!
neoofoox said:
When you start android and the code is displayed there is the pinguine on the top, wenn the pinguin disapear and the code begin at the top, than press vol down
Click to expand...
Click to collapse
Oke thanks,
And do you know how long i need to wait before the pinguine dissapeared???
great rom !! but if i make a call or get incoming call,,i can't found red and green button in my screen,,so i used red/green button in under screen..thank very much
Gameforce said:
Oke thanks,
And do you know how long i need to wait before the pinguine dissapeared???
Click to expand...
Click to collapse
It should apeare after 30-60sec (normaly shorter)
PsychoAssasin said:
tried this for a few hours and the build is quite solid and stable, but with all other android builds ive tried, the keypad freezes all the time for me. froze 3 times so far in 4 hours. guess i still cant use any android build until thats fixed in the kernels. ill try the turbo keernel tosee if its any better
Click to expand...
Click to collapse
you can use the kernel with separate keyboard modulus so you can activate it with one touch everytime it freazes ...
ncw2k69 said:
- Very Fast Wifi with No Dropping .. ---- NOT Working for me.. when i try to start wi fi my x1 reboots back in winmo
great speedy rom, very fast!!!!
Click to expand...
Click to collapse
i don't know the reason , but it may be winmo related or radio related , BTW try to enable wifi in Winmo & start android ...
vannanta said:
great rom !! but if i make a call or get incoming call,,i can't found red and green button in my screen,,so i used red/green button in under screen..thank very much
Click to expand...
Click to collapse
yes it was excluded , it is always getting distorted & some times doesn't work ...
neoofoox said:
It should apeare after 30-60sec (normaly shorter)
Click to expand...
Click to collapse
it depends on the SDcard contents , if there are many files & folders it'll take longer & so on ...
needo said:
it depends on the SDcard contents , if there are many files & folders it'll take longer & so on ...
Click to expand...
Click to collapse
Ah okay I didn't know. I have quite clean sdcard.
And I have one question. After Installing gapps (after launching android) everything worked fine and I never get a force close message. But after starting Android after reboot I get a lot of force close messages. (The process android.process.acore has stopped unexpectedly. Please try again.)
I use turbo kernel (this one in the turbo kernel folder @612mHz)
The included one didn't work. I pressed harret and then phone restarted (i tried both 652 and 614 mHz) Do someone know what's the problem? But that is not so urgent
Hi , greeting everyone !
If ICS has not yet occurred then it's time for a new Custom Rom ...
This Custom Rom is based on the original Archos Firmware 3.2.80 and is only for enable SDE.
This release is permanently ROOT, have one busybox installed proper, Su and Superuser is up to date.
Included : 05/02/12
- new boot animation;
- battery percentage, and other new Icon;
- several applications in addition ( office free, flashplayer 11,adobe_air.....+++);
- windows animations;
- increase sdcard speed;
- more free ram;
- zipaling for /data/app/*;
- increase internet security and speed up ;
- high quality camera ( Sony-Bravia patch...);
- and other stuff....
These are the files you need for install this Custom Rom :
- archos.ext4.update => http://www.4shared.com/zip/4RFkHY4x/archosext4update.html
- zImage and initramfs => http://www.4shared.com/zip/gd_SWiL7/drive.html ( are into drive archive ....drive.zip)
Installation :
Can be installed over previous versions , for this it is better to flash with initramfs posted of @gen_scheisskopf ( http://forum.xda-developers.com/showthread.php?t=1480906 )
If you want to do a clean installation (recommended), then you only need to download : archos.ext4.update and drive.zip .
Also included enable vibrator and adjust sound volume !
( Not need to install : Superuser.apk and BusyBox.apk from the Market - they are already installed and updated , latest : Superuser - v.3.0.7(41), busybox - v1.19.3, su - v3.0.3.2 )
Great Thanks @gen_scheisskopf ...
With respect,
surdu_petru
How did you get more ram? I don't like the battery icons, so I'll stay on stock rooted, but how did you get more?
Sent from my HTC Desire HD using xda premium
Quinny899 said:
How did you get more ram? I don't like the battery icons, so I'll stay on stock rooted, but how did you get more?
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
Hi !
Everyone is free to choose what version of software like.... , that is why I tried to diversify the range of Archos firmware ....everyone is free to choose currently between four versions of software released ( Original Stock Rom firmware3.2.8, Root Rom firmware3.2.80 , Custom Rom firm. 3.2.80 and Plasma Active,Thanks @LeTama ).
Of course expected and welcomed other versions of Custom Rom including various stuff !!!
On the other side, I have answered the same question about ram in the previous version ( Honeycomb Custom Rom 3.2.79 => http://forum.xda-developers.com/showthread.php?t=1462726 )
Have a nice day and Good Luck !
hi, sorry for my noob questions. I have used gen_scheisskopf's initramfs. After the first "long" boot, with pleasure, I saw that the "wipe-dalvik.update" file was deleted automatically now is necessary reflash your initramfs surdu_petru? are there problem leaving gen_scheisskopf's initramfs and rebooting without "wipe-dalvik.update" file? thank you
p.s. new icons for me are always better on every new version
hitman72 said:
hi, sorry for my noob questions. I have used gen_scheisskopf's initramfs. After the first "long" boot, with pleasure, I saw that the "wipe-dalvik.update" file was deleted automatically now is necessary reflash your initramfs surdu_petru? are there problem leaving gen_scheisskopf's initramfs and rebooting without "wipe-dalvik.update" file? thank you
p.s. new icons for me are always better on every new version
Click to expand...
Click to collapse
Ok ! no need to use another initramfs !
And less beware :
- if you plan to do a clean installation ( go to Format System, Reformat Device...OK! and reinstall archos_firmware_it4.aos , than copy archos.ext4.update into Internal Storage data/media/archos.ext4.update, reboot and into recovery copy the two files that are in drive.zip zImage , initramfs - into new drive ) - for this you don't need gen_scheisskopf's initramfs ;
- if you plan to do just update over the original firmware or rooted firmware you need just copy archos.ext4.update on Internal Storage (data/media/archos.ext4.update) and into recovery choose gen_scheisskopf's initramfs and zImage ;
I think you're better now...
Thanks for all your work! Just so I know, which file can I get rid off after flashing? I had your .79 custom rom before. Can I delete the archos.ext4.update file ?
By the way is the wipe Dalvik-cache from Supercharger OK?
blogmaw said:
Thanks for all your work! Just so I know, which file can I get rid off after flashing? I had your .79 custom rom before. Can I delete the archos.ext4.update file ?
By the way is the wipe Dalvik-cache from Supercharger OK?
Click to expand...
Click to collapse
If you are still in Custom Rom 3.2.79 you need to push archos.ext4.update into data/media and in recovery copy gen_scheisskopf's initramfs and zImage into new drive ! whith this you'll not lose your work , and Yes after flash you can delete archos.ext4.update from data/media/...Good Luck!
blogmaw said:
Thanks for all your work! Just so I know, which file can I get rid off after flashing? I had your .79 custom rom before. Can I delete the archos.ext4.update file ?
By the way is the wipe Dalvik-cache from Supercharger OK?
Click to expand...
Click to collapse
There is no need to worry about .update files, they are removed automatically.
I'll check Supercharger dalvik-cache wipe later.
BTW there is no need to flash suduru_petru init if you did flash modified one, functionality is the same, modified init works stable on my G9.
tapatalked from Desire
i just flashed this and will observe for some bugs. i dont know if this happened only to me. i noticed that when i turn off the wifi, the 3G stick will automatically be turn On even if its Off. tried switching it Off,but still it wont turn off.. it is still prompts that 3G stick connected
Flash sites not working
Hi
with this version of root I am unable to get Flash 11 to work (previous root is O.K.). Sites prompt for Flash to be installed although the software is installed. I can't uninstall as it seems to be part of the kernal. Installing Flash 10.3 allows Flash sites to work until a reboot disables it again. Any ideas.
best regards
Bill
bothylad said:
Hi
with this version of root I am unable to get Flash 11 to work (previous root is O.K.). Sites prompt for Flash to be installed although the software is installed. I can't uninstall as it seems to be part of the kernal. Installing Flash 10.3 allows Flash sites to work until a reboot disables it again. Any ideas.
best regards
Bill
Click to expand...
Click to collapse
Flash is not a part of kernel or system, it is a separate application.
Wipe dalvik-cache and try again- here is info.
If this doesn't help- reinstall flash
bothylad said:
Hi
with this version of root I am unable to get Flash 11 to work (previous root is O.K.). Sites prompt for Flash to be installed although the software is installed. I can't uninstall as it seems to be part of the kernal. Installing Flash 10.3 allows Flash sites to work until a reboot disables it again. Any ideas.
best regards
Bill
Click to expand...
Click to collapse
Ok!
You can do that : navigate into /system/app/flashplayer.apk and try to reinstall it , it's work fine....you can do the same with...adobe_air.apk and BooksTablet.apk
flashplayer and adobe_air are just preinstalled in this custom rom .
Thanks , Good Luck!
surdu_petru said:
Ok!
You can do that : navigate into /system/app/flashplayer.apk and try to reinstall it , it's work fine....you can do the same with...adobe_air.apk and BooksTablet.apk
flashplayer and adobe_air are just preinstalled in this custom rom .
Thanks , Good Luck!
Click to expand...
Click to collapse
Hi
thanks for your quick reply
I'am unable to delete Flashplayer, if I tap on the .apk I am prompted to re-install Flashplayer this resolves the issue until I reboot. Is this a permissions problem, how can I check.
I downloaded root explorer changed permissions on flashplayer.apk deleted it and re-installed from market working O.K. now.
Regards
Bill
Greetings, surdu_petru,
I recently installed this custom rom, into my Archos 80G9, and I have a question:
is there anyway to disble/enable the power supplied to de usb connector, in where the 3g Usb Dongle is connected, I use this port to supply power to a small fan, in order to cool down the tablet, and i would like to have control over it, before i rooted, I could controlled it by, just toggling the 3g switch on/off.
thank you in advance, for any help you could give me,
OsiriS5180
osiris5180 said:
Greetings, surdu_petru,
I recently installed this custom rom, into my Archos 80G9, and I have a question:
is there anyway to disble/enable the power supplied to de usb connector, in where the 3g Usb Dongle is connected, I use this port to supply power to a small fan, in order to cool down the tablet, and i would like to have control over it, before i rooted, I could controlled it by, just toggling the 3g switch on/off.
thank you in advance, for any help you could give me,
OsiriS5180
Click to expand...
Click to collapse
Because no changes are made in this direction in the original software, I think you can control as before toggling 3G switch ON/OFF !
surdu_petru said:
Because no changes are made in this direction in the original software, I think you can control as before toggling 3G switch ON/OFF !
Click to expand...
Click to collapse
Thank you, for your fast response, right now I have the switch in the off position, and still have the fan on, it could be the rooting process? , I rooted first with your other post for this version of the firmware, any help would be appreciated.....
Thank you in advance. ..
Osiris5180
So you recommend a clean install? Does this mean removing the kernel or formatting the whole drive?
Sent from my ARCHOS 80G9 using Tapatalk
Shano56 said:
So you recommend a clean install? Does this mean removing the kernel or formatting the whole drive?
Sent from my ARCHOS 80G9 using Tapatalk
Click to expand...
Click to collapse
A clean installation is the best and safest method of installing an operating system....to performe clean instal go to Format System->Reformate Device...-> I understand OK!, after that you need install original .aos file, and than flash archos.ext4.update. ( and yes ..will be completely formatted !)
And if you have important data and you can not delete, than you can install over previous versions, but you need initframs with removal Dalvik-Cache mechanism ( see initramfs posted [email protected]_scheisskopf).
osiris5180 said:
Thank you, for your fast response, right now I have the switch in the off position, and still have the fan on, it could be the rooting process? , I rooted first with your other post for this version of the firmware, any help would be appreciated.....
Thank you in advance. ..
Osiris5180
Click to expand...
Click to collapse
OK !...you are right ....I'll take a look ..but not right now...I have no time ! Thanks !
Thanks.................great job
hey guys ..
today i try to make rom in this post
http://forum.xda-developers.com/showthread.php?t=1862253
So when my Galaxy restart
nothing happened and it not working
and if i try to login by recovery mode I can't
so plz any one can helped me !!
or How i make my Galaxy run ..
Please give some details ...What do you mean by trying to make a rom with *link* ? :/
POTATO!!!!
One assumes you didn't follow these steps exactly:
0)Delete GoverIO from /System/etc/init.d/ if exist.
1) Download the ROM and required fix patch from the links below.
2) Place it in SD Card.
3) Reboot to recovery CWM.
4) wipe data/factory reset
5) wipe cache
5) wipe dalvik cache.
6) Install AceCream V1.4 zip from sd card.
7) Mount system and data.
8) Install Required patch AceCream V1.4 from sd card.
9) Reboot.
10)Enjoy.
Prawesome said:
Please give some details ...What do you mean by trying to make a rom with *link* ? :/
POTATO!!!!
Click to expand...
Click to collapse
sry about my language am not good in English
I mean I have Galaxy Gt-S5830i
and I try to make ( Ace Cream ) on my Galaxy " install " ..
nvm I make my Galaxy running ..
But my problem .. Now there no Arabic in Other language
I hope any Developers try to help me cuz I love this rom ( Ace Cream )
Hai guys.here im posting a video tutorial how to install custom rom in karbonn titanium s5..hope u guys follow it for perfect installation
video link: http://youtu.be/zBBZYOZnY_M
here i showed the rom installation of nemesis which include gapps installation.if ur rom does not contain gapps installation then u can skip that part.bye.tkcr
And a small thing to tell.whenever u want to install any mod from recovery never forget to mount system in mount/storage
Manual Installation Procedure
Procedure
1.Turn off ur mobile
2.Press and hold volume up +power button at a time and release them when u see red screen
3.now cwm recovery is opened.---(Navigation up=volume up;navigation down=volume down;Selection=power button)
4.go to Backup and Storage and open it
6.click backup---(This backup's ur current rom and stores it in ur sd-card which can be used to restore ur os if necessary)
7.After backup completes go to main menu
8.click on wipe data/factory reset nad then yes
9.now go to main menu and click advanced.u will notice wipe dalvik cache.click it and yes
10.now go to mount/stoarage in main menu and format system.---(Be carefull at this step.never click sys_boot format at any time)
11.now in the same menu u notice mount data and mount system.so mount both data and system.
12.go back to main main.now go to install zip from sd-card
13.select ht ecustom rom rar file and click yes.
14.(read this line completely then press)After completiton of rom installation click reboot system now.if u r installaing any gapps then dnt press reboot(specially for nemesis rom).Goto mount and storage after rom installation.again press mount system.go to main menu.select install zip from sd-card.select ur gapps and intall and reboot now.
Thats it.now ur new rom takes some time to boot up..any queries regarding flashing reply me.hit thanks if helped.encourage all devs.Bye
download link
deepa2119 said:
Procedure
1.Turn off ur mobile
2.Press and hold volume up +power button at a time and release them when u see red screen
3.now cwm recovery is opened.---(Navigation up=volume up;navigation down=volume down;Selection=power button)
4.go to Backup and Storage and open it
6.click backup---(This backup's ur current rom and stores it in ur sd-card which can be used to restore ur os if necessary)
7.After backup completes go to main menu
8.click on wipe data/factory reset nad then yes
9.now go to main menu and click advanced.u will notice wipe dalvik cache.click it and yes
10.now go to mount/stoarage in main menu and format system.---(Be carefull at this step.never click sys_boot format at any time)
11.now in the same menu u notice mount data and mount system.so mount both data and system.
12.go back to main main.now go to install zip from sd-card
13.select ht ecustom rom rar file and click yes.
14.(read this line completely then press)After completiton of rom installation click reboot system now.if u r installaing any gapps then dnt press reboot(specially for nemesis rom).Goto mount and storage after rom installation.again press mount system.go to main menu.select install zip from sd-card.select ur gapps and intall and reboot now.
Thats it.now ur new rom takes some time to boot up..any queries regarding flashing reply me.hit thanks if helped.encourage all devs.Bye
Click to expand...
Click to collapse
download link plzz!! for custome rome.
usanrai said:
download link plzz!! for custome rome.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2235153..here u can find the roms which are available for titanium s5(Credits zeyaan)
thank u
:good:
deepa2119 said:
http://forum.xda-developers.com/showthread.php?t=2235153..here u can find the roms which are available for titanium s5(Credits zeyaan)
Click to expand...
Click to collapse
thanks man!
deepa2119 said:
Procedure
1.Turn off ur mobile
2.Press and hold volume up +power button at a time and release them when u see red screen
3.now cwm recovery is opened.---(Navigation up=volume up;navigation down=volume down;Selection=power button)
4.go to Backup and Storage and open it
6.click backup---(This backup's ur current rom and stores it in ur sd-card which can be used to restore ur os if necessary)
7.After backup completes go to main menu
8.click on wipe data/factory reset nad then yes
9.now go to main menu and click advanced.u will notice wipe dalvik cache.click it and yes
10.now go to mount/stoarage in main menu and format system.---(Be carefull at this step.never click sys_boot format at any time)
11.now in the same menu u notice mount data and mount system.so mount both data and system.
12.go back to main main.now go to install zip from sd-card
13.select ht ecustom rom rar file and click yes.
14.(read this line completely then press)After completiton of rom installation click reboot system now.if u r installaing any gapps then dnt press reboot(specially for nemesis rom).Goto mount and storage after rom installation.again press mount system.go to main menu.select install zip from sd-card.select ur gapps and intall and reboot now.
Thats it.now ur new rom takes some time to boot up..any queries regarding flashing reply me.hit thanks if helped.encourage all devs.Bye
Click to expand...
Click to collapse
thank you i v flashed kitkat one n galxy a4 one by this methodn it worked....:good:
does this methode workes on stoke rome too????
if nt then plz discribe the process plz!
want to flash the old rom.... old iz gold :laugh:
usanrai said:
thank you i v flashed kitkat one n galxy a4 one by this methodn it worked....:good:
does this methode workes on stoke rome too????
if nt then plz discribe the process plz!
want to flash the old rom.... old iz gold :laugh:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=28719715
here universal flasher is provided.follow those instructions.if u got any problem.reply.
deepa2119 said:
http://forum.xda-developers.com/showthread.php?p=28719715
here universal flasher is provided.follow those instructions.if u got any problem.reply.
Click to expand...
Click to collapse
hi, can you provide stock rom for karbonn titanium s2
Karbonn A9* (star) ROM of xperia or micromax or any other which work great
i have karbonn A9* (star) ...and i really pissed of this phone .... i bought karbonn A15 7 month ago but it was not working well so i approached to service center they gave me A9* after 3 month and it is also not working well its hangs all the time restart unnecessarily again n again ....so please please please help to to install some better ROM of any good mobile which will work well ...even of Micomax or XOLO ..any but please help
Im having issues with it not wanting to mount system and data, is there a solution to this? =/
vaibmails1 said:
i have karbonn A9* (star) ...and i really pissed of this phone .... i bought karbonn A15 7 month ago but it was not working well so i approached to service center they gave me A9* after 3 month and it is also not working well its hangs all the time restart unnecessarily again n again ....so please please please help to to install some better ROM of any good mobile which will work well ...even of Micomax or XOLO ..any but please help
Click to expand...
Click to collapse
First; Wrong phone. Learn to use Google.
Second; Every ROM is tailor made for a phone. You can't just install a MMX or a Xolo ROM on your phone.
Third; This user probably doesn't have this phone. She wouldn't be able to help you any more than you can help yourself.
Lastly, I don't want to seem like a rude guy, but please use proper english. It helps with the readability of your post.
I can tell that you are new, so,
Welcome to the community of xda!
Restart your phone
otakurave said:
Im having issues with it not wanting to mount system and data, is there a solution to this? =/
Click to expand...
Click to collapse
You have to restart your phone in case needed you can restore to default rom and then try to install this rom
great thank you
Unlock simlock ! possible?
deepa2119 said:
Hai guys.here im posting a video tutorial how to install custom rom in karbonn titanium s5..hope u guys follow it for perfect installation
video link: http://youtu.be/zBBZYOZnY_M
here i showed the rom installation of nemesis which include gapps installation.if ur rom does not contain gapps installation then u can skip that part.bye.tkcr
And a small thing to tell.whenever u want to install any mod from recovery never forget to mount system in mount/storage
Click to expand...
Click to collapse
Hi...
I have two clone that is truemove beyond 3g which is sim-locked. I bought each 75$ but they did not told me if the phone was sim-locked
is it possible to unlock the phone?
also they made one of sim-slots useless.
please help! can do a sim-unlock? possible flash modem/radio ?
I flashed a stock karbonn rom works fine still sim-locked.