Cingular 8125 mp3 Ringer problem - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I recently moved the registry path for the ringtones to the storage card and then back to the Windows directory. Now in the sound settings it will recognize the mp3 files but not play them or allow them to be the final selection. I have tried changing the ringtone registry to different locations and in sound setting it will not play or allow selection of any mp3 in any folder. WMA's will still play and are selectable. Any ideas? I really don't want to change the mp3 every time I want a different ringer.

Related

Helmi 1.4 vanilla: no ringtone heard...

I tried searching and did not see a similar topic, so I am posting this new one.
I have tried to move a ringtone to \windows\rings
I have tried to adapt the registry setting to change the ring directory to a different place
I have confirmed that I am using the Ring option for the Ring Type, as opposed to Vibrate or any of the other settings under the settings-->phone menu--I do see the ring tone options and have tried the windows ones as well
Any other suggestions I can try to enable ringing?
i put my ring tones in ram disk.(wave files)
Thank you for your reply. I tried to switch my ringtone folder to Storage Card and RamDisk--though the ringtones appeared as options, they would not play when the phone rang.
Are there other things I can try?
i just put ring tone in ram folder.
not ring tone folder in ram.and used wav file.not mp3.
o2 xda IIs
R2D1 said:
Thank you for your reply. I tried to switch my ringtone folder to Storage Card and RamDisk--though the ringtones appeared as options, they would not play when the phone rang.
Are there other things I can try?
Click to expand...
Click to collapse
what media type is your ringtone? wav, mp3, wma? all of these types can be used when located in \windows, \windows\rings, \Ramdisk root & \Storage Card root.
may i suggest trying out one of the default PPC ringtones if it plays when moved into any of the directories above.
what media type is your ringtone? wav, mp3, wma? all of these types can be used when located in \windows, \windows\rings, \Ramdisk root & \Storage Card root.
may i suggest trying out one of the default PPC ringtones if it plays when moved into any of the directories above.
I tried moving copies of the files into the folders you mentioned--it showed the duplicates as options for the ringtones, but unfortunately did not work. I used the oldphone.wav. Any other ideas?
opps
thought you whould have change the name a little
like putting a 1 in front of the tone name.
I just ended up reinstalling the ROM. Not sure what the cause was... as I uninstalled everything I added... Oh well... all is good now...

How to change ringtone directory + improve?

Hey, guys. I have a storage card with a folder called "Music" on it. There is all my music. How can I set a .mp3 as ring tone without any software? Kaiser has this option, but it always needs to copy the .mp3 file, that I want as ring tone in the main memory in "My Music". I think there's a registry tweak to do this... does somebody know how?
What I want: on the today screen in Sounds to be able to chose a .mp3 from my storage as ring tone without to copy it to the main memory.
I hope you understand me.. sorry for my terrible English.
Thanks.
I think I have seen this option change in SK Tools
Do it using Audio Manager
Audio Manager has this option to use any song as Ringtone.
It even has a function where you can Select the in-out points for the ringtone in a song.

No more mp3 as ringtone

I can't assign mp3's as ringtones anymore for some reason.
They used to work, but now Windows doesn't allow me to even select them from the list of all available ringtones (they are listed, but when selecting them and pressing "ok", Windows automatically selects the next song from the list, which is in mwa format)
When I convert my mp3's to mwa, they can be played.
No one having the same kind of problems?
I can't set mp3's as ringtones or sms-sound. But I can play those same mp3's with AudioManager, with Mediaplayer, TCPMP and with Gsplayer.
Wav and mwa files can still be used (lucky me)
Is there perhaps a default player or some setting in the register that points to a default player that needs adjustment?
Had same problem before
I also experienced this problem before. I found out that in order for mp3's to work as ringtones, they had to be associated with windows media player. To fix this, go to GSPlayer, TCPMP, and any other media player you have, go to their respective settings, and uncheck Mp3 as a file association. Your mp3 ringtone should work now.
I have my mp3s associated with tcpmp and can assign them as a ringtone just fine. Not sure how you are assigning them, but this is how I do it.
Open file explorer, browse to mp3s, click-hold the mp3 I want as ringtone, choose "set as ringtone" from the context menu.
VidMan said:
I also experienced this problem before. I found out that in order for mp3's to work as ringtones, they had to be associated with windows media player. To fix this, go to GSPlayer, TCPMP, and any other media player you have, go to their respective settings, and uncheck Mp3 as a file association. Your mp3 ringtone should work now.
Click to expand...
Click to collapse
Ahh, thanks a lot. That seems to be it!
At least I was thinking in the good direction with that default player
VidMan said:
I also experienced this problem before. I found out that in order for mp3's to work as ringtones, they had to be associated with windows media player. To fix this, go to GSPlayer, TCPMP, and any other media player you have, go to their respective settings, and uncheck Mp3 as a file association. Your mp3 ringtone should work now.
Click to expand...
Click to collapse
This is exactly what I did when I had the same problem. Those file associations will cause you some problems.
meorah said:
I have my mp3s associated with tcpmp and can assign them as a ringtone just fine. Not sure how you are assigning them, but this is how I do it.
Open file explorer, browse to mp3s, click-hold the mp3 I want as ringtone, choose "set as ringtone" from the context menu.
Click to expand...
Click to collapse
If it works just fine with you with TCPMP, then the problem must lie with Gsplayer, since that was my default player for mp3's.
Fixing Ringtones
I had this problem and worked out how to fix it.
Look at the following Reg Key (change midifile to mp3file for mp3 issues)
Delete any EventSoundHandlers already in place and add this Key.
[HKEY_CLASSES_ROOT\midifile\Shellex\EventSoundHandlers\{245F94CF-DD9C-46F9-B4C8-D2B14A877893}]
@="XME EventSound Player"
Problem fixed.
David

Problem changing Ringtone

This is driving me mad! For the life of me my Kaiser won't let me change the phone's ringtone from the standard. When I open an MP3 in audiomanager then choose set as ringtone, I get the error message "there was an error copying the ring tone to \my documents\ my ringtones. The ringtone could not be set. Please verify you have enough room on your device and try again", i've even tried manually copying mp3's to the \my ringtones directory, I can view them but they don't play in the ringtone selection screen (they play OK in audiomanager), even if I select a different mp3 in the sounds and notifications screen and select OK, my kaiser defaults automatically back to the standard ringtone. Oh, there's loads of space free as well - about 47mb.
Any ideas?
mp3 extension
Did you change the program for the .mp3 extension?
I noticed the same behaviour when I assigned the mp3 extensions to MortPlayer:
my ringtone would revert back to the default and choosing the mp3 ringtone wouldn't work.
After unchecking the mp3 extension within MortPlayer, I could choose a mp3 ringtone again.
Thanks a lot dude - will give this a go.

HTC Audio Manager for Music

Hello everyone,
audio manager searches the whole phone for mp3s. since i have quite a few mp3 ringtones it is very annoying when htc audio manager thinks the mp3 ringtones are music files too.
is there any way that i can make htc audio manager only search a specific folder on my wings for music? this way i wouldnt have to remove the entries everytime or i wouldnt have to make new playlists every time...
thanks
no solution right????????
Sure...
Place your ringtones in the path noted in the registry value:
HKLM\Software\HTC\AudioManager\ring_tone_path
Default value: \My Documents\My Ringtones\
Done.
Now help with my _setup.xml
this solution doesnt work because the sound files from the windows operating system are still included in the default playlist of the player. so for example im listening to music, then suddenly i hear the "battery empty" sound and it scares the **** out of me because i think my phone ran outta battery AGAIN
that's interesting. those sounds don't show up in my library.
That is very weird, I dont have those sounds either, could you have changed something somewhere that import's every music file on the phone & card?
Guys I have a about 1 GB of music on my memory card and guess what the HTC Audio manager does not play music anymore. It shows me all the tracks I can scroll through the list but as soon as I press the button to play it pauses and then reboots the phone.
Howevr, I can play the same music via the windows music player. So there is nothing wrong with the memeory of the music tracks.
Any suggestions
Call HTC Tech support, reset the phone to default settings. Sounds like something is causing an error and then a reboot. Or something infected the phone and now its sick. I would reset the phone first then call HTC and see if they can help. Plausable they shipped it out with a bug...
I think the newer versions of the HTC audio manager uses a different registry entry device_scan_path and device_scan_path_path0
just enter where your music files are located under these entries and put the ringtones somewhere else. this worked for me.
I too am look to solve this problem... I had downloaded a bunch of extra sounds for my verious notifications. currently I have them stared on my sd card \Storage Card\My Documents. My Music is on \Storage Card\Music. When I start up AudioManager it finds the files in both folders. I changed the 2 registry key and put them both the same witch place the songs 2x in the library and I also tried leaving the second entry black. both occasions the files from noth folders were in there.
macaraballojr said:
I too am look to solve this problem... I had downloaded a bunch of extra sounds for my verious notifications. currently I have them stared on my sd card \Storage Card\My Documents. My Music is on \Storage Card\Music. When I start up AudioManager it finds the files in both folders. I changed the 2 registry key and put them both the same witch place the songs 2x in the library and I also tried leaving the second entry black. both occasions the files from noth folders were in there.
Click to expand...
Click to collapse
Have you tried moving your ring tones and such music off the SD card and into the handset location for that type of audio file? Also check in audio manager, I havnt looked recently but I thought you could tell it to check only the SD card? Maybe I am just loopy (wouldnt surprise me)...
10332007 said:
Have you tried moving your ring tones and such music off the SD card and into the handset location for that type of audio file? Also check in audio manager, I havnt looked recently but I thought you could tell it to check only the SD card? Maybe I am just loopy (wouldnt surprise me)...
Click to expand...
Click to collapse
I really didnt want to move them to the device cuz there are so many i dont have that much room on the device... And I been through the registry and program itself all weekend with no luck.
macaraballojr said:
I really didnt want to move them to the device cuz there are so many i dont have that much room on the device... And I been through the registry and program itself all weekend with no luck.
Click to expand...
Click to collapse
I'm not suggesting you move your music, just the files that are not for musical enjoyment, the other misc sounds that get used for ring tones etc off the card. Its been a while since I have been in audio manager and will have to play around with it.
10332007 said:
I'm not suggesting you move your music, just the files that are not for musical enjoyment, the other misc sounds that get used for ring tones etc off the card. Its been a while since I have been in audio manager and will have to play around with it.
Click to expand...
Click to collapse
THats what I am talking about also... I dl a zip file with a bunch of sound (not music) too much to move to the device
Hmm I recall Audio Manager having more options, but I am not always with it
If I have the time I can take a peak into the registry but others are more aptly suited for such an adventure.
For now my suggestion (if you have not already done this) is make play lists, I dont know how much you have as music and how much is random audio clips. You can also try going through and removing some of the audio clips you are not using? With playlists at least while the program may list all the music files on the card the ones you dont want to hear wont be in your playlists so you wont have to worry about them quite as much...
I have the same problem. I've modified also the registers but there is no effect.
Thx for help, i had the same problem on HD2

Categories

Resources