G4 Tmobile USA,which OEM rom to flash? - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I flashed my wizard with faria rom but I want the original from tmobile back, how I know if the rom is for G3 or G4 device? Any can point me which one.
Thanks.

tmo's rom
If you are a t-mobile customer then you can log into you myT-mobile account and in the top right-hand corner of the screen it should have a picture of your device. If you click on this it should take you to a page that has support for your device. this page should have their 2.26 rom on it. just download and install.

c0wb0y84 said:
If you are a t-mobile customer then you can log into you myT-mobile account and in the top right-hand corner of the screen it should have a picture of your device. If you click on this it should take you to a page that has support for your device. this page should have their 2.26 rom on it. just download and install.
Click to expand...
Click to collapse
Thanks for fast responce, but I'm not tmobile customer, just want the OEM rom for sell the phone(maybe)..
Thanks.

Found this on the ftp: RUU_TMobile_US_226102_22610105_022511_WWE_Ship.exe
Will be this OK with my G4 device?
Thanks.

G4
Is your G4 device cid unlocked or not? If not there is a thread on the G4 forum that should direct you to roms that are ok with your device. Unfortunately thats about as far as my advice on a G4 can go but I will continue searching for an answer. Let me know if you find one first.

c0wb0y84 said:
Is your G4 device cid unlocked or not? If not there is a thread on the G4 forum that should direct you to roms that are ok with your device. Unfortunately thats about as far as my advice on a G4 can go but I will continue searching for an answer. Let me know if you find one first.
Click to expand...
Click to collapse
I think is cid unlocked because I paid the imei-check unlock($38.00US) and runned the program and unlock the phone...
Thanks

to check the rom just look at the numbers, 0001 at the end? it will confirm when you run the ruu on your pc
B

G4
I don't know if you have seen this one, I realize it is a custom rom and not the official tmo rom but it will work with a G4 and its a 2.26 rom that appears to be based off of tmo's ftp://xda:[email protected]/RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4.exe

c0wb0y84 said:
I don't know if you have seen this one, I realize it is a custom rom and not the official tmo rom but it will work with a G4 and its a 2.26 rom that appears to be based off of tmo's ftp://xda:[email protected]/RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4.exe
Click to expand...
Click to collapse
Will try it, Thanks

I have cingular, If I reflash it with this: RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe will be ok?

vijovame said:
I have cingular, If I reflash it with this: RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe will be ok?
Click to expand...
Click to collapse
Just curious as to a: what your main objective is, b: did any of those other roms work, and c: where did you find this last rom? I don't see it on the ftp site.

c0wb0y84 said:
Just curious as to a: what your main objective is, b: did any of those other roms work, and c: where did you find this last rom? I don't see it on the ftp site.
Click to expand...
Click to collapse
LOL...
a: I was wondering to sell the phone, is brand new but get a little disappointed because is G4 and in the past I sold my G3. I sold the G3 and purchased a xv6700, my wife has a imate jam and was in LOVE with the G3( Qtek 9100), then I sold xv6700 and purchased a hermes cigular 8525(my main phone) and my wife still with the jam, now purchased the G4 t-mo usa mda for valentine's gift and want to customize it.(hope my wife doesn't read this forum)
b: The first T-mobile OEM worked, faria's v2 too, but the last from Cingular did not, it stopped at 95% and told me that was a wrong device, I tried twice to flash it. reflashed faria's. Did not tested t-mo custom. I want cingular extended rom but I flash it with faria's or t-mo roms and doesn't work, flased a custom extended rom and nothing, I want a cingular oem rom and then reflash faria's or wm6 rom, many useful cabs for the cingular network in the extended rom.
c: I use Cute ftp to access the xda ftp, I can see all the crap there... lol. But is there!
d: Sorry in my english, I speak spanish

You say you're G4 is CID-unlocked. You can flash every rom from aku2 and above on it now that doesn't contain IPL/SPL. Never flash a rom that contains IPL/SPL. So, if you want to flash the "original" rom back you'll have to remove the IPL/SPL part manual.
There's a great thread from Risidoro that explains how to do this:
http://forum.xda-developers.com/showthread.php?t=271043

vippie said:
You say you're G4 is CID-unlocked. You can flash every rom from aku2 and above on it now that doesn't contain IPL/SPL. Never flash a rom that contains IPL/SPL. So, if you want to flash the "original" rom back you'll have to remove the IPL/SPL part manual.
There's a great thread from Risidoro that explains how to do this:
http://forum.xda-developers.com/showthread.php?t=271043
Click to expand...
Click to collapse
This is a great tool, Thanks!!!!!

Related

unlock problem

i tried several times to CID unlock my device like described in lokiwiz post so i can set another rom on it but does not work , i always get invalid vendor id .
can someone please help me with this ???or tell me what i did wrong .
same problem witm k-jam
thats the tool that i used in first place.see the error in the picture.
joppewillems said:
I have the same here with the same unlock tool,
my phone is a MDA VARIO and I want to set up the new Qtek Rom
Click to expand...
Click to collapse
I ordered the same phone (MDA Vario) from Netherlands a few days ago, still waiting for it to come.
It seems that what i feared the most happened: t-mobile upgraded Vario ROM to the latest release (>= 2.16 if i'm not wrong) and so it is no more possible to CID-unlock (or SIM-unlock) the device. Damn!!!
I'm italian and i don't speak Dutch so i really need to be able to both SIM and CID unlock my device or it'll be just a brick in my hands!
The only possible solution i can suggest is:
- Check your ROM version to see if it's a recent one (>= 2.x) or an older (1.x). If the latter is your case then do not follow next steps and read again lokiwiz thread and istructions. If, instead, you have a recent release (> 2.x) then read on.
- download an old dutch t-mobile ROM (find it here: ftp://ftp.xda-developers.com/Wizard/Roms/Tmobile/MDA_Vario_1060202_103_11210_TMNL_Ship.exe)
PS: if you're using a different model/country then download an old ROM (1.x) from your operator (O2, t-mobile, Orange, etc) in the same original device's language.
- install it (it should not require a CID unlock since it's an official t-mobile dutch release)
- CID (and SIM if you want) unlock your device (lokiwiz should work on an older 1.06 ROM as the one you just installed)
- Install the ROM (even an updated one) that suits you best.
- Last and most important: let us know if you succeded at it!!!
Bye, i really hope this solution works and/or you find a different solution. I think i'll have the same problem very soon!
Isidoro
YOU CANNOT REVERT TO THE OLD ROM.
faria said:
YOU CANNOT REVERT TO THE OLD ROM.
Click to expand...
Click to collapse
YOU CAN !
Several people managed to do it, don't gonna look up the topics for you, but there not so old, so it can be easy to find and otherwise just use search
Or you may find the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe QTEK ROM installs after which you can use lokiwiz
molski said:
faria said:
YOU CANNOT REVERT TO THE OLD ROM.
Click to expand...
Click to collapse
YOU CAN !
Several people managed to do it, don't gonna look up the topics for you, but there not so old, so it can be easy to find and otherwise just use search
Click to expand...
Click to collapse
...yes, if you have a sd backup from the original rom problem is a 99% of users dont do one when they first get their devices,not of because they are lazy but because most people dont know that there is such haking at first.F ANY ONE HAVE A SD BACKUP IMAGE FROM THE ORIGINAL I-MATE K-JAM PLEASE UPLOAD OR PM ME.THANKS :wink:
5
JoninLA said:
Or you may find the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe QTEK ROM installs after which you can use lokiwiz
Click to expand...
Click to collapse
even in the k-jam?
JoninLA said:
Or you may find the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe QTEK ROM installs after which you can use lokiwiz
Click to expand...
Click to collapse
yesssssssssssssssssssssssssss finally downgraded.thank you.u r my saviour
update;
got the lastest o2 rom runing im my k-jam.im overjoyed.i will post a how to soon.
Glad it worked Faria, that custom QTEK ROM seems to be a universal cure if you need to downgrade for some reason.
faria said:
update;
got the lastest o2 rom runing im my k-jam.im overjoyed.i will post a how to soon.
Click to expand...
Click to collapse
Yes, pls, we need that HowTo!!!
Bye,
Isidoro
HOW TO CID. UNLOCK ALL WIZARD VARIANTS
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
HOW TO CID. UNLOCK ALL WIZARD VARIANTS ( THAT HAVE THE LATEST ROM BUILD )
First domload CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE. Rom from the ftp site from the above link, unpack it and just click the ROMUpdateUtility_Wizard_NoID.exe to start downgrading. Simply follow the prompts .
After the rom are loaded go thru the initial setup as you would with any rom .
Now download the (Lokiwiz02b) from below and follow the instructions .do not forget to copy the. cab file(enable rapi) to your device and run it before running Lokiwiz.
Now run lockiwiz and unlock your machine ,your machine will reboot itself.
That’s it your wizard is unlocked.
Now simply upgrade to any rom ,you want.
a more polisheed version of how to will be posted but i got to go to work now.
MANY THANKS TO JoninLA FOR FINDING THE DOWNGRADING ROM.UPDATED HOW TO HERE;
http://forum.xda-developers.com/viewtopic.php?p=271547#271547
Thanks for help, this solved all my problems but one:
If i CID unlock and SIM unlock my phone (after installing Custom 1.5 WWE ROM) and then i install latest AKU2 I-mate Italian rom, will the SIM unlock (and CID one too) be preserved? Or will the upgrade set the simlock back on the phone?
Thanks,
Isidoro
risidoro said:
Thanks for help, this solved all my problems but one:
If i CID unlock and SIM unlock my phone (after installing Custom 1.5 WWE ROM) and then i install latest AKU2 I-mate Italian rom, will the SIM unlock (and CID one too) be preserved? Or will the upgrade set the simlock back on the phone?
Thanks,
Isidoro
Click to expand...
Click to collapse
As far as I know sim unlock only is needed once as for cid I DONT know but will find out this afternoon when I upgrade to thr latest I-mate rom an then gonna try to load the o2 rom again.as for you soon to be owner you problably just need to use the lokwiz tool because your new machine problably comes with the shipping room that is older as my 2 wizards did .they are only 3 weeks old.
Note;i-mate k-jam comes allready simunlocked from factory .
faria said:
As far as I know sim unlock only is needed once as for cid know know but will find out this afternoon when I upgrade to thr latest I-mate rom an then gonna try to load the o2 rom again.as for you soon to be owner you problably just need to use the lokwiz tool because your new machine problably comes with the shipping room that is older as my 2 wizards did .they are only 3 weeks old.
Note;i-mate k-jam comes allready simunlocked from factory .
Click to expand...
Click to collapse
Thanks for your comment. I really hope that sim lock won't come back when i upgrade to the latest AKU2 rom.
As for the rom i will find in my Vario, i hope it'll be an older one (so i'll be able to use lokiwiz)!!!
Bye
risidoro said:
faria said:
As far as I know sim unlock only is needed once as for cid know know but will find out this afternoon when I upgrade to thr latest I-mate rom an then gonna try to load the o2 rom again.as for you soon to be owner you problably just need to use the lokwiz tool because your new machine problably comes with the shipping room that is older as my 2 wizards did .they are only 3 weeks old.
Note;i-mate k-jam comes allready simunlocked from factory .
Click to expand...
Click to collapse
Thanks for your comment. I really hope that sim lock won't come back when i upgrade to the latest AKU2 rom.
As for the rom i will find in my Vario, i hope it'll be an older one (so i'll be able to use lokiwiz)!!!
Bye
Click to expand...
Click to collapse
Sim-unlock is needed only once as far as I know.
Furthermore I updated my Kjam (simunlock from factory) with the new english rom, then I downgraded to old Italian rom and finally I re-upgraded to Italian new rom without problems. I just do cid-unlock once.
Bye Slump
slumpolo said:
Sim-unlock is needed only once as far as I know.
Furthermore I updated my Kjam (simunlock from factory) with the new english rom, then I downgraded to old Italian rom and finally I re-upgraded to Italian new rom without problems. I just do cid-unlock once.
Bye Slump
Click to expand...
Click to collapse
Grazie Slump! Alla fine mi hai risposto comunque, ehehe!!! Ci si vede, bye!
Thanks Slump!
Bye
{how to} has been updated here;
http://forum.xda-developers.com/viewtopic.php?p=271547#271547

Update my Cingular 8125 To any other Rom

Hi i need help ok i belive my phone is a g4. the phone is locked to cingualr i think. the rom is 2.25.11.1 wwe. ok well i want to update my rom to another 1 so i tried unlocking the cid and i tihnk i did it but when i tried updating a another rom it says that theirs an error in the update utilty PLZ if some 1 has AIM i need help on what to do plZ HELP ME
Clutch13 said:
Hi i need help ok i belive my phone is a g4. the phone is locked to cingualr i think. the rom is 2.25.11.1 wwe. ok well i want to update my rom to another 1 so i tried unlocking the cid and i tihnk i did it but when i tried updating a another rom it says that theirs an error in the update utilty PLZ if some 1 has AIM i need help on what to do plZ HELP ME
Click to expand...
Click to collapse
I will be the first to tell you...read the stickys
Second off you do have a G4 phone, which can be a little tricker flashing, I would try and use one of Molskis Roms for the G4, should upgrade easily. If you are getting that error, then you may have downloaded a 3g one.
Be careful, i broke my first 8125 by bricking it trying to flash it.
i downloaded the new mda 2.26 rom
Well, can any rom go onto a G4 device? I was reading up on farias new windows crossbow themed rom, an AK2 based rom...
will this work properly on my G4 8125 currently with Cingulars 2.26 rom? Ive been reading these posts, but cant keep up with them all lol
Thanks for the help
CAn any 1 plz help me ?
thankins said:
Be careful, i broke my first 8125 by bricking it trying to flash it.
Click to expand...
Click to collapse
hmmm, wonder how that happened but at least you got a G3 out of the deal
Clutch13 said:
CAn any 1 plz help me ?
Click to expand...
Click to collapse
start here:
http://forum.xda-developers.com/showthread.php?t=284292
i need personal help can some 1 IM ME
Clutch13 said:
i need personal help can some 1 IM ME
Click to expand...
Click to collapse
For what it is worth, Shogunmark has been personally helping you. Also, if you are using anything other than Cingular's ROM you run the very real risk of the "missing calls, tons of voicemail" issue. You are probably better off just waiting for a better ROM from Cingular until the challenge has been sorted out.
--M
When it comes to flashing you need to read and fully understand what you are about to do to your phone. Its also very important to know whether its a G3 or G4. Judging by the error you recieved there is 1 of 2 things here, either:
A: you have a G4 and need to check out the G4 section for roms available to you. or
B: You did not successfully cid unlock your phone. So see A

what is rom

Ok I’m a total noob and ‘ve have already unlock my T-Mobile MDA so I can use it as a Cingular cell phone . about I know I got a G3 since my
IPL is 2.xx
Spl is 2.xx
Gsm 2.35.11
os 2.26.10.
Now my Question is what’s next? What’s that rom I’ve been reading about? howe do i know what version i have ? What is the os 2.26.10? What version should I be using? how do I REMOVE THE T-Mobile logo an stuff? I know it’s a lot of question but I figured that every one can jump in and give me some knowledge than you very much .for reading this.
ROM = firmware = Windows mobile
OS 2.26.10.2 = newest oficial firmware
Radio 2.35.11 - I think it does not exist
IPL/SPL = bootloader (it depend on the end of that number) if you have G4 (IPL/SPL ends 0001), than you can`t unlock and write unoficial (better then oficial) ROM
T-Mobile logo is easy to rewrite by any unoficial ROM or by your cooked splash screen
for simplicity...think of a ROM as the operating system and the extended ROM as the bundled software your computer comes with...
you can flash your phone with any wizard ROM you'd like...and as a noob you may not know that most ROM's are cooked without network customizations so you'll need (in your case cingular) the cingular customizations cab file (do a search)
like johnny said...most custom ROM's have all the tmobile/cingular/etc bull**** removed so you won't have to worry about it
the os 2.26.10.x is the version number of a ROM (newest official as of right now)
know this...you will void your warrenty when you unlock your phone further which you'll have to do...so first go here:
http://forum.xda-developers.com/showthread.php?t=285435
and then find a ROM you like...
THX a couple more questions
Ok 1st I need to say THX to both Johnny & j3d1n4s7y For your reply I got a couple more questions if my SPl is 2.26 so I need to down grade to bring it back to 1.xx right?
What is
Rom 2.26.10.2 WWE & Radio 02.47.11 what are their purpose?
thank you in advance
Be Careful...
-tiouko-
I notice that you want to upgrade/downgrade ROMs. Be aware that there are two types of devices, G3 & G4 and you should be aware of what type of phone it is. If when you boot your phone & the IPL & SPL read 2.xx then you have a G3 phone if it reads 2.xx.001 or something like that then you have a G4. Be aware that if you use the wrong type of ROM to flash you will brick your phone - read; read; read; before you start flashing your ROM.
http://forum.xda-developers.com/showthread.php?t=285435 by Doc P is a great read if you have a G3
Good Luck!!
And Btw, I believe ROM stands for "Read Only Memory" which is where you write the OS and then the applications only read from this place. It is pretty much similar to the ROM on your PC.
tiouko said:
Ok 1st I need to say THX to both Johnny & j3d1n4s7y For your reply I got a couple more questions if my SPl is 2.26 so I need to down grade to bring it back to 1.xx right?
What is
Rom 2.26.10.2 WWE & Radio 02.47.11 what are their purpose?
thank you in advance
Click to expand...
Click to collapse
... and WWE = "World Wide English", the language of the ROM. FRE might be for French for example. The World Wide part means that the version is applicable accross all English Locales, as opposed to having localised English versions for Australia, the US, and the UK for example.
Yeah man thanks for the warnings I believe that my is a g3 because is 2.26 and my spl is 2.26 with out the extension. I'm currently doing my readings carefully before i do anythings major.
This is a wonderful thread.
I am a newbie and I am facing lots of problem with my ROM.
I am using Dopod838 and my phone warrenty is void.
I am thinking to upgrade the ROM since my original rom does not support A2DP.
Since my phone is unlock, whereby I can use any provider sim card and use it in my phone, do I still need to unlock my rom?
I got one las question i confirmed that my wizard is a g3 according to the ultimate guide I should downgrade if i want to run home brew rom which is what i wanr to do . I've already downloaded the button rom 1.o5 along with lockwiz o.2b my question is do I cid unlock first or do I downgrade with button 1.o5 than cidunlock second I could of swear I was suppose to cid unlock first.Please help.
tiouko said:
I got one las question i confirmed that my wizard is a g3 according to the ultimate guide I should downgrade if i want to run home brew rom which is what i wanr to do . I've already downloaded the button rom 1.o5 along with lockwiz o.2b my question is do I cid unlock first or do I downgrade with button 1.o5 than cidunlock second I could of swear I was suppose to cid unlock first.Please help.
Click to expand...
Click to collapse
5th Sticky has the information you need, its title is:
SOLUTION FOUND -CID/sim UNLOCKING FOR WIZARD WITH AKU2 ROMS.
Gives you a step by step process. Basically you can't CID unlock until you downgrade to the button rom. By your post it looks like you have the tools you need. This thread will give you the instructions on how to use them and when.
Thx Buddy exactly what I wanted to know I'm going to get started I'll let you know how I did.
Success
Success, success, success Thank you guys so much for your help I did not brick my expansive device .
Ok I followed all the steps on the guide buy using button's 1.05 ROM and wait specially when it reaches 98% Than I used lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b and finally I used button's 1.05 ROM again to get my SPL down to 1.01. I got my phone both Sim Unlock & Cidunlock I guess I’m ready for the world. Yet still have more questions .
I got
IPL 1.01
SPL1.01
Gsm1.12.10.0
Os1.5.4.2
Now I need to install the best I’m using singular but I don’t care about their ROMs I need the latest of everything including extended roms , radio, you name it . Any suggestion would be greatly appreciated..
Are you listening decent_devil since you seem to be in the boat as I am?
tiouko said:
Success, success, success Thank you guys so much for your help I did not brick my expansive device .
Ok I followed all the steps on the guide buy using button's 1.05 ROM and wait specially when it reaches 98% Than I used lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b and finally I used button's 1.05 ROM again to get my SPL down to 1.01. I got my phone both Sim Unlock & Cidunlock I guess I’m ready for the world. Yet still have more questions .
I got
IPL 1.01
SPL1.01
Gsm1.12.10.0
Os1.5.4.2
Now I need to install the best I’m using singular but I don’t care about their ROMs I need the latest of everything including extended roms , radio, you name it . Any suggestion would be greatly appreciated..
Are you listening decent_devil since you seem to be in the boat as I am?
Click to expand...
Click to collapse
Yes I m .. hehe! I hv lots to read.. I still got to read through all the sticky note so that I can load a new ROM to my dopod 838.
I'll probe u when I bump into problem.. hehe!
Some of the best ROMs are introduced (and downloadable) via this forum. So you can check out yourself what they include and if it fits your needs.
The latest ROMs are based on AKU 3.2/3.5, but they are still in development and can be a bit buggy.
Personally I am very satisfied using the Molski.biz 2.26.10.2 Final Edition Rom (based on AKU2.3).
skyrebel said:
Some of the best ROMs are introduced (and downloadable) via this forum. So you can check out yourself what they include and if it fits your needs.
The latest ROMs are based on AKU 3.2/3.5, but they are still in development and can be a bit buggy.
Personally I am very satisfied using the Molski.biz 2.26.10.2 Final Edition Rom (based on AKU2.3).
Click to expand...
Click to collapse
thank you sky rebel i'll get right on it.
Also no problem D devil
I have a t-mobile mda....unlocked (but not by me)...how do I know if the CID is unnlocked aswell ?
bruce.wayne_ire said:
I have a t-mobile mda....unlocked (but not by me)...how do I know if the CID is unnlocked aswell ?
Click to expand...
Click to collapse
Qood question I'm not sure being that I', noob but i would assume that it's not cid unlock since you have to go the extra mile to get it cid unlock . can you tell me if you are seeing network logo ie singular or t mobile on the screen is yes it's possible that' it's not cid unlock. but keek asking hopefully some one would have the right answer for you. good luck
bruce.wayne_ire said:
I have a t-mobile mda....unlocked (but not by me)...how do I know if the CID is unnlocked aswell ?
Click to expand...
Click to collapse
If in doubt just CID unlock again. It doesn't hurt anything and that way you can be sure that you are unlocked.
tiouko said:
Also no problem D devil
Click to expand...
Click to collapse
I have successfully upgrade my rom to Molski.biz 2.26.10.2 Final Edition Rom as well!
It solved all the bugs facing by using the default Dopod rom! Hurray!
decent_devil said:
I have successfully upgrade my rom to Molski.biz 2.26.10.2 Final Edition Rom as well!
It solved all the bugs facing by using the default Dopod rom! Hurray!
Click to expand...
Click to collapse
Great man I I'm Using Molski .biz 3.o version. Now come my next challenge. wifi Have you gotten that to work yet? if yes please let me know the procedure cause i can't get that to work.
I know that the wrong thread just thought you might know. If any one read this please help.

Anybody Help Me..?

HAVING KJAM BOUGHT IN KSA WITHOUT ANY CARRIER WITH IPL 2.16, SPL 2.16, GSM 02.07.10, OS 2.16.9.1 ...CAN I UPGRADE TO FARIA'S WM6..?IF NOT THEN WHAT I NEED?HOW I CAN DO IT!
bilalbutt10 said:
HAVING KJAM BOUGHT IN KSA WITHOUT ANY CARRIER WITH IPL 2.16, SPL 2.16, GSM 02.07.10, OS 2.16.9.1 ...CAN I UPGRADE TO FARIA'S WM6..?IF NOT THEN WHAT I NEED?HOW I CAN DO IT!
Click to expand...
Click to collapse
First, get rid of the red font and all uppercase... sheesh...
Second you need to read and read... You need to understand this stuff before you start flashing or you will find yourself with a dead phone.
I know this is a ton of info, but this post has links to all the great stuff here and you can learn just about anything you want.
http://forum.xda-developers.com/showpost.php?p=1206964&postcount=894
Don't expect people to spoon feed you as the stikies and the wiki have everything you need. Just read and learn.
Sorry... can't read in red/caps!
bilalbutt10 said:
HAVING KJAM BOUGHT IN KSA WITHOUT ANY CARRIER WITH IPL 2.16, SPL 2.16, GSM 02.07.10, OS 2.16.9.1 ...CAN I UPGRADE TO FARIA'S WM6..?IF NOT THEN WHAT I NEED?HOW I CAN DO IT!
Click to expand...
Click to collapse
where is ksa?
moto211 said:
where is ksa?
Click to expand...
Click to collapse
Hmmm. . . Could be any of the following:
Korean Student Association
Kernersville Soccer Association
Kosher Supervision of America
Kansas Sportsmen's Alliance
Knowlton School of Architecture
KARACHI SCHOOL OF ART
Kauai Society of Artists
Kitchen Specialist Association
I'm gonna' vote for the first one on the list, since a Google search for KSA returned more hits for that than any of the others.
Sory for this kind of Font...Studied Enough Now
Hi, i haved been reading on this forum for last many days. for all who dont know KSA - Kingdome of Saudia Arabia.
Red font is just for attention. sory for that.
I have planed to Upgrade my KJam with Faria's WM6. i have read many articles about it. i want to know what Faria Wrote on the Top of his article <[Faria-htc wizard___WWE WM6 ROM- [the real thing] - xda-developers]> in red, <Extended ROM version Faria v5> if i dont have it, then can i proceed with upgrade to his ROM.I need it. Any body plz provide me link for it.
Secondly i need BOOTLOADER VERSION 2XXX OR ABOVE which he wrote must to have.
rest all i have prepared and downloaded. Ready to upgrade after having these two things.
Thanks to all.
bilalbutt10 said:
Hi, i haved been reading on this forum for last many days. for all who dont know KSA - Kingdome of Saudia Arabia.
Red font is just for attention. sory for that.
Click to expand...
Click to collapse
Interesting, never heard it referred to that way...
I have planed to Upgrade my KJam with Faria's WM6. i have read many articles about it. i want to know what Faria Wrote on the Top of his article <[Faria-htc wizard___WWE WM6 ROM- [the real thing] - xda-developers]> in red, <Extended ROM version Faria v5> if i dont have it, then can i proceed with upgrade to his ROM.I need it. Any body plz provide me link for it.
Click to expand...
Click to collapse
Its in the ROM. When you put on Faria's WM6, you'll get that (he's just listing what all comes with it).
Secondly i need BOOTLOADER VERSION 2XXX OR ABOVE which he wrote must to have.
Click to expand...
Click to collapse
That means you have to have an IPL / SPL that are both 2.xx or higher. Don't try to do this with either IPL or SPL at 1.xx
You will have to CID Unlock your device first. So read and follow this guide (and the posts it takes you too). Don't skip steps and check your work as you go and you'll be fine
http://forum.xda-developers.com/showthread.php?t=298613
Key is, you have to downgrade, CID unlock, downgrade again (to get SPL to 1.xx) then upgrade to an official 2.xx ROM. Only after you do all of that can you then try flashing WM6 (or other custom roms).
Thanks Fraz! you confirmed what i was thinking...
I got a used i-mate K-Jam, the x-user was using it just as Phone(for making/recieving calls/sms). So all things(ROMs) are genuine which is
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1
U have cleared my confusion, so now i can proceed with Faria's WM6 (CB-AIRAF.exe 62.1 file size)
I have made a backup using aWizard (by ahlok_hk).
I also Unlocked it using aWizard (it was locked or not?i dont know, but i went through the Unlock Process & saw the msg that ur device is Unlocked now)Plz tell me how to know which device is CID locked or unlocked.
All things are ripped now...so i can go ahead with Faria's WM6...what do u say...?
bilalbutt10 said:
I also Unlocked it using aWizard (it was locked or not?i dont know, but i went through the Unlock Process & saw the msg that ur device is Unlocked now)Plz tell me how to know which device is CID locked or unlocked.
All things are ripped now...so i can go ahead with Faria's WM6...what do u say...?
Click to expand...
Click to collapse
I've never CID Unlocked that way. I've always used the links I pointed you to in my previous post. As far as I know there is no way to know if you are CID Unlocked for sure until you flash a new ROM. If it appears to work, but only the splash screens change (and everything else is just like it was before) then you are not CID Unlocked.
you can give it a try, but personally I'd recommend you do the steps in my previous post as that method definetly works.

T-mobile 2.26 rom download

Guys, do anyone know where to download the t-mobile 2.26 rom???
Also, i'm using mda vario g4 device, how to unlock the cid???
Thanks so much if anyone could help me.......
jimscby said:
Guys, do anyone know where to download the t-mobile 2.26 rom???
Also, i'm using mda vario g4 device, how to unlock the cid???
Thanks so much if anyone could help me.......
Click to expand...
Click to collapse
To get the T-Mobile 2.26 rom go here: http://www.t-mobile.com/wmupgrade
To learn how to CID unlock your phone, read the stickies at the top of the Wizard upgrading forum.
jimscby said:
Guys, do anyone know where to download the t-mobile 2.26 rom???
Also, i'm using mda vario g4 device, how to unlock the cid???
Thanks so much if anyone could help me.......
Click to expand...
Click to collapse
Aweeee !!!
You got a G4 device,better not download T-Mobile 2.26 Rom and flash it to your device,it'll certainly 'BRICK' your phone as it includes IPL/SPL 2.26,which is meant for G3 devices. IPL/SPL 2.26 are DOC chip 2.xx.xxx G3 Bootloaders,where as your device has DOC chip 2.xx.xxx1 G4 Bootloaders,see the difference ?,if you flash a G3 IPL/SPL 2.xx.xxx to your phone with IPL/SPL 2.xx.xxx1 G4 device,it will certainly Brick the phone.
Secondly, a G4 device cannot be CID unlocked like a G3 device,infect never try to CID unlock your phone. If you want to upgrade there's a method for upgrading a G4 device called 'SoftSPL & HardSPL'
Read the stickies in the G4 forum for this method.
Good luck
That t-mobile link doesn't work... It goes to the phones for sale when you try to download. Anyone currently have the usa t-mobile rom available? Pease pm me. Thanks- Bryan
The T-Mobile ROM will not brick your G4. It has both the G3 and the G4 IPL/SPL files and will install the appropriate ones. Try the wizard wiki, you may be able to find a download link for it there. I just checked all of the sites that I have bookmarked that would have it but didn't find it, sorry.
xeno1 said:
The T-Mobile ROM will not brick your G4. It has both the G3 and the G4 IPL/SPL files and will install the appropriate ones. Try the wizard wiki, you may be able to find a download link for it there. I just checked all of the sites that I have bookmarked that would have it but didn't find it, sorry.
Click to expand...
Click to collapse
aah !
Thanks for the clarification.
You can download T-Mobile official Rom from here :-
http://www.tm-phonedownloads.com/mdas.html
or download the Official T-Mobile Rom without IPL/SPL included here :-
http://www.megaupload.com/?d=5EV5LK0H
Cheers
Bryan858 said:
That t-mobile link doesn't work... It goes to the phones for sale when you try to download. Anyone currently have the usa t-mobile rom available? Pease pm me. Thanks- Bryan
Click to expand...
Click to collapse
that links works well, but you need valid T-mobile USA phone # (or guess, get any one phone is ok)
It seems that I can not find any more "T-Mobile 2.26 rom" on the internet.Can somebody help me with an temporary upload ?
EmilianM said:
It seems that I can not find any more "T-Mobile 2.26 rom" on the internet.Can somebody help me with an temporary upload ?
Click to expand...
Click to collapse
I posted this yesterday "click here"
-MyHTC- said:
I posted this yesterday "click here"
Click to expand...
Click to collapse
Thanks MyHTC....but it seems that I need
ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe to install WM6.5 CR96 Touch HD™ v6.5.0.2.3 beta ].
I still have this error "error 300 invalid update tool"
i do not have a t mobile number its there another way to download it pls help me and sory fi bad negilsh
alexwittmann said:
i do not have a t mobile number its there another way to download it pls help me and sory fi bad negilsh
Click to expand...
Click to collapse
you can get it on http://rapidshare.com/#!download|41...RUU_Wizard_2261020_226_22511_ENG_US.exe|51413
I have no problem
All Fine

Categories

Resources