Hello all...This may be my first post but i have beed watching the forum for quite a long time!You are doing a great work around here!
I need a big favor from anyone that can help!Does anyone have the original SPV m1500 rom provided by orange and can upload it somewhere for me to download?Or can anyone back up his ROM from a m1500 and upload it somewhere?
And i have question as well and i would be grateful if you could answer this one!
If you haven't CID unlocked your phone and somehow managed to upgrade the ROM with a different make's one (i have one from Qtek 2020i at the moment) will it be blocked by the network or is a matter that the person that i bought it from (over ebay) reported it as lost/stolen?Currently everything works fine apart from the phone bit!It says no service and can't detect any network!(it just says ''unable to read setting from the network.Try viewing settings later or disconnect data connection and try again'').
Any help would be greatly appreciated
sorry double post!server had problems!can a moderator please delete one of them/?
Any help pls!??
Hi,
SPV M1500 same as O2 Xda IIi / Dopod 699 / i-Mate PDA2 / Qtek 2020i and known as HTC Alpine. You can upgrade using any ROM that build for HTC Alpine.
Please check at here about all in one sim unlock tool by itsme
http://forum.xda-developers.com/showthread.php?t=240784
Thanks
Thanx clustered for the reply!
I have already used that thread to upgrade my firmware but i am just asking if i anyone has the original SPV m1500 orange rom available?
The thing is i have done the upgrade without CID unlocking the phone!Everything went ok but the only problem is that now the phone in the signal bar has an exclamation mark and says no service!So i was just wondering if it is the upgrade that ''blocked'' the phone bit of the M1500 or is it something else!
Thanks again
after a lot of search i found in a forum someone stating that :
''RIM check the ROM version and RADIO version before they allow you to connect to the relay. If it's not an approved mix, your device IMEI will be BARRED from the relay.''
is that possible and do you think that's why my phone gives the no service message?
Could anyone suggest any solutions to this?
anyone can help??
HTC Alpine as known asSPV M1500 can be unlocked free. I DID IT
THIS IS THE SIM UNLOCKING FOR HTC PH10D:
follow these steps carefully:
Find and download xdadev all unlock.
if you don't find it ,send me an email to [email protected] and I will send it to you.
-Take the SIM card out of your pocket pc and reboot the phone with no sim card,and no memory card.
-Unzip the file on your HTC Alpine and put the file in My Documents or in Storage ,in the pocket pc.
-Run the application.
the application should disply ,UNLOCK SUCCESSFULL and write details of it in a textfile called xdadevunlock.dll
and place it in My Documents.
-Replace the SIM card ,or put a different SIM card into the phone.
-When prompted for unlocking code input 00000000.
-That's it! ...It worked perfectly on my HTC Alpine ,the so called SPV M1500.
-Do NOT run the application again if the phone has succesfully been unlocked!!!!--there myght be bad things;;just check using a different SIM card,or
even two.and then delete it forever.
-Many thanks to the creators of this program!
In the second part I would like to say to people using Windows MOBILE deviceCENTER in VISTA that in bootloader ,neither VISTA neither this Windows Mobile Device Center does Not detect the phone through the USB cable... but only after a REBOOT . Interesting when the screen says '' tap the screen to begin setup your device'' ,if you don't press anything but just plug the USB, the mobile device center detect the phone and you can see the original Windows files in a folder called ''extended ROM'' into the phone.....
...BUT you cannot copy ,add or delete anything...
Does anyone know how to do to be able to add ,delete ,or copy these files???
HTC Alpine as known asSPV M1500 can be unlocked free. I DID IT
THIS IS THE SIM UNLOCKING FOR HTC PH10D:
follow these steps carefully:
Find and download xdadev all unlock.
if you don't find it ,send me an email to [email protected] and I will send it to you.
-Take the SIM card out of your pocket pc and reboot the phone with no sim card,and no memory card.
-Unzip the file on your HTC Alpine and put the file in My Documents or in Storage ,in the pocket pc.
-Run the application.
the application should disply ,UNLOCK SUCCESSFULL and write details of it in a textfile called xdadevunlock.dll
and place it in My Documents.
-Replace the SIM card ,or put a different SIM card into the phone.
-When prompted for unlocking code input 00000000.
-That's it! ...It worked perfectly on my HTC Alpine ,the so called SPV M1500.
-Do NOT run the application again if the phone has succesfully been unlocked!!!!--there myght be bad things;;just check using a different SIM card,or
even two.and then delete it forever.
-Many thanks to the creators of this program!
In the second part I would like to say to people using Windows MOBILE deviceCENTER in VISTA that in bootloader ,neither VISTA neither this Windows Mobile Device Center does Not detect the phone through the USB cable... but only after a REBOOT . Interesting when the screen says '' tap the screen to begin setup your device'' ,if you don't press anything but just plug the USB, the mobile device center detect the phone and you can see the original Windows files in a folder called ''extended ROM'' into the phone.....
...BUT you cannot copy ,add or delete anything...
Does anyone know how to do to be able to add ,delete ,or copy these files???
Related
Hi
Am newbie to the whole XDA thing (am just converting from BB), have managed to unlock my XDA Mini S and tried running K-JAM_WWE_216901_2169101_020721_ship.exe as i heard this would reflash the ROM to the latest (a friend of mine gave me this copy).
Got an error during this, and wondered if there was a specific XDA Mini S version (have searched on the site and it appears that there is on ftp://ftp.xda-developers.com/Wizard) and there are many different ROMS under the ROM directory, but i am unable to login to this site.
Am i just being thick here.
Any help gretaly appreciated.
That ROM upgrade worked ok on my xda-mini-s
When I upgraded my ROM I done the following.....
#unlock phone
with no SIM card in phone
copy EnableRapi.cab to phone
run EnableRapi.cab from phone
run lokiwiz.bat from PC
select option 'U' Unlock SIM
phone reboots
add SIM to backout bin file names on PC
run lokiwiz.bat from PC
select option 'C' unlock CID
phone reboots
add CID to backout bin file names on PC
#install new ROM
uncomress ROM file from zip
click ROM install file
follow instruction
takes 10 minutes
phone reboots
Hope this helps
Bilbo,
Hi. I ran through what you put but my Mini S does not auto reboot. I'm not sure the exact definition of a soft reboot is? - Put the stylus in the side or hold the power button for a few seconds?
Either way I cannot get the new KJAM rom on as invalid vendor ID is haunting me.
Any help would be appreciated.
Thank You
Ben
Dudes - I've done the same upgrade to my mini S. Not sure if it's worth the bother. No difference in speed/performance and my keyboard shifted symbols (@?£$) are out of sync. I think I'll go back to the Mini S rom without the customised stuff.
LLcoolJ:
I noticed lots of difference, speed and battery life.
To get the keyboard from US to UK symbols use the following:
Here are the registry changes ....
Keyboard language
Registry: HKCU\ControlPanel\Keybd
Key: Locale (string)
Value: 0809 English UK
0409 English US
0407 German
0419 Russian
040C French
0410 Italian
040A Spanish
benih007 said:
Bilbo,
Hi. I ran through what you put but my Mini S does not auto reboot. I'm not sure the exact definition of a soft reboot is? - Put the stylus in the side or hold the power button for a few seconds?
Either way I cannot get the new KJAM rom on as invalid vendor ID is haunting me.
Any help would be appreciated.
Thank You
Ben
Click to expand...
Click to collapse
The invalid vendor ID is the result of the ROM update..... to get rid of it make sure you run :
run lokiwiz.bat from PC
select option 'U' Unlock SIM
phone reboots
add SIM to backout bin file names on PC
A soft reboot is when you hit the reset button on the right hand side, its like rebooting a PC. A hard reset however is a re-install boot where you loose everything and the ROM is re-installed.
Cheers Bilbo - I've made the changes to the registry and the keyboard talks like me. Your right about battery power as well.
Bilbo.
Thank you for replying and helping.
Let me just go over what you said...
first I ran the loki cab file on the mini S.
run lokiwiz.bat from PC -- done.
select option 'U' Unlock SIM -- done (with sim card removed)
phone reboots -- not automatically though, but I will reboot it after the lokiwiz.bat finishes
add SIM to backout bin file names on PC -- what does this mean? this is not in the lokiwiz instructions and this is where i'm going wrong. Where is the bin file created btw, I can never find it?
I have tried so many combinations i'm starting to lose hope.
If you can help to get this damn thing working I promise to make a donation to this web site.
Thanks for all the good work.
Ben
i managed to get the unlock, but did not do the CID (so will try that).
So once i have done that will the K-JAM_WWE_216901_2169101_020721_ship.exe upgrade work?
Here's how I got mine working. - Remove the Sim card. Make sure you use Lockwiz02b. Select U to unlock from the options menu. The mini S should reboot automatically. Leave the device alone until its functional again and then start Lockwiz02b again. Select C (CID unlock) from the menu. It should reboot again and close down the Lockwiz box. The mini S should now be ready for a rom upgrade. On my first attempt I used the original Lockwiz prog which caused problems for me.
I'm about to do my rom update on my mini s....but this thread is so confusing!
Is there a step by step guide somewhere on the forum???
ROM Upgrade
Upgraded O2 XDA mini without any real problems:
I used the aWizard 1.3 Beta 2 tool which allowed me to carry out the CID Unlock and was pretty easy to understand. What it did not do was pick up the ROM from the rom folder but once I had completed the CID unlock I ran the rom normally and all was well.
So in essence: Connect Mini to PC via Activesync
Run the aWizard Bat file enabling RAPI (This is used to communicate with your XDA once it has done using Activesync). Then select the Unlock CID option. Once completed I then exited the wizard and followed the instructions as part of the rom upgrade and all worked well no hitches except the one mentioned above about the keyboard (now I have to find out how to modify the registry).
So what I used: aWizard 1.3 Beta 2 and QTEK Rom 2.17
186504-ruu_9100_2170702_21707102_20710_qtek_wwe_ship.exe
Mystery Solved!!!!
I finally figured out why its not working....
When I downloaded the loki zip file I opened it up in winzip and dragged the contents to a folder I created. Ran the batch file eveything seemed ok and the unlocker said it unlocked the device.
I have now realised that you have extract the files from the loki zip file and use the folder structure. If you don't, the utils directory is not created and the loki.bat cannot reference some files.
Found the answer on page 12/13 of the loki thread.
Thanks All
Ben
After doing the CID unlock the ROM install worked fine.
Just having the keyboard issue at the moment with symbols, went to:
Registry: HKCU\ControlPanel\Keybd
Key: Locale (string)
Value: 0809 English UK
but could not find the locale key to set to UK?
All i see is:
DefaultKeyLock
InitialDelay
MuteSwitch
RepeatRate
ShowWarningMsg
Am i looking in the right place or do i have to add this in (if so how)?
Cheers
Youv'e got to create a new registry key. Assuming you've got a registry editor. Go to HKEY_CURRENT_USER / Control Panel / Keybd.
Then create a new string value. Name it Locale and give it a value of 0809 for UK. Then reboot.
Just went in a created the new reg key as you mentioned.
Rebooted and it worked.
Many thanks for all your help on this, it is most appreciated.
I am now the converted!!!
So to sum up for anybody else:
Bought XDA Mini S from 02
use Lockwiz02b
Select U to unlock from the options menu
The mini S should reboot automatically
Start Lockwiz02b again
Select C (CID unlock) from the menu
It should reboot again and close down the Lockwiz box
The mini S should now be ready for a rom upgrade.
Then run
K-JAM_WWE_216901_2169101_020721_ship.exe
follow usual prompts.
Once phone is up and running, get a reg edit tool (i used PHMregedit) as the keyboard for a couple of the symbols is out of synch (think it is US style).
Using regedit tool
Go to HKEY_CURRENT_USER / Control Panel / Keybd
Then create a new string value
Name it Locale and give it a value of 0809 for UK
Then reboot.
Mini XDA should now work fine.
I have found that the new push technology for email is faster than Blackberry and more usueful.
Hope this is helpful to others.
Cheers great forum
quick question...
i am fed up with waiting for o2 to release their latest ROM so i am going to take the plunge with this ROM instead, my question is do i have to make any special changes once installed to make it work with O2 UK i.e. mms settings, GPRS settings etc.?
Also i noticed somebody has put together a T-Mobile USA customised ROM any chance that somebody will do this for O2 UK?
hyettd said:
Just went in a created the new reg key as you mentioned.
Rebooted and it worked.
Many thanks for all your help on this, it is most appreciated.
I am now the converted!!!
So to sum up for anybody else:
Bought XDA Mini S from 02
use Lockwiz02b
Select U to unlock from the options menu
The mini S should reboot automatically
Start Lockwiz02b again
Select C (CID unlock) from the menu
It should reboot again and close down the Lockwiz box
The mini S should now be ready for a rom upgrade.
Then run
K-JAM_WWE_216901_2169101_020721_ship.exe
follow usual prompts.
Once phone is up and running, get a reg edit tool (i used PHMregedit) as the keyboard for a couple of the symbols is out of synch (think it is US style).
Using regedit tool
Go to HKEY_CURRENT_USER / Control Panel / Keybd
Then create a new string value
Name it Locale and give it a value of 0809 for UK
Then reboot.
Mini XDA should now work fine.
I have found that the new push technology for email is faster than Blackberry and more usueful.
Hope this is helpful to others.
Cheers great forum
Click to expand...
Click to collapse
The Problem im having here is that once i have created the registry key, it deletes after a reboot. Is there something else i need to unlock to allow writing to the registry?
New Roms
Hi there - I'm sure this is your answer - I have read this on many forums.
WM05 takes a while to store the registry updates after you exit your editor. Make the registry change and wait a minute or so before performing the soft reset.
Hope this helps - we have all fell for this "improvement" to WM5 from the boys at MS.
Regards,
Chris.
:lol:
Thanks Bilbo . . . Spot on. First time to all this and followed it a treat
Thanks All
Hello,
today I get my HTC MTeoR.
For my Exchangeserversync I need to install a other root certificate.
But the Phone had a Applicationlock.
All known solutions for other HTC Phones don't work.
Have anybody a new solutions?
Regards
sotmysoft
I got the same problem, and after speeking with both the Danish & English HTC support, they both told me to wait for a rom upgrade or check for modification to "registration database". I have now looked through the whole internet and so far nobody seems to solved the problem.
So now i have HTC MTeoR as a brick, and a HTC TyTn send back because of problems with screen and keyboard !! Well done HTC !!
Peter
sotmysoft said:
Hello,
today I get my HTC MTeoR.
For my Exchangeserversync I need to install a other root certificate.
But the Phone had a Applicationlock.
All known solutions for other HTC Phones don't work.
Have anybody a new solutions?
Regards
sotmysoft
Click to expand...
Click to collapse
I have read somewhere that you need a special Regeditor which is recognised by the HTC and then change the following Key: HKLM/Security/policies/policies
00001017 from 128 to 144
That did the job on my QTEK 8500
...what does this policy do? Mine contains the value 148...
Have read the same on the net, but does not work on MTeoR.
Peter
Churchill said:
I have read somewhere that you need a special Regeditor which is recognised by the HTC and then change the following Key: HKLM/Security/policies/policies
00001017 from 128 to 144
That did the job on my QTEK 8500
Click to expand...
Click to collapse
I think it enables you to install a certificate
The reg hack that has worked previously for other WM5 devices doesnt work on the Mteor. In fact, you get a permisison denied error when trying to change the value.
Apparently HTC are working on a new ROM but can't give an ETA :evil:
What is this?
Has someone ever tried this registry editor?
It seems to work with MTeoR, but I don't have it yet...
ftp://xda:[email protected]/Uploads/Breeze/regeditSTG2.zip
I used the one called regeditSTG but I think it is the same thing...
My device is QTEK 8500 and the regeditSTG works on my device
Confirm that regeditSTG2 DOES unlock the Mteor, but the phone will not let you copy this app to the phone or to the card- so it has to be copied from a computer directly onto the storage card before using. Then it works!
Thanks guys, this is a real breakthrough
I have found another thing in the HKLM\security\policies\policies add the following DWORD "0000101b" value 1
I found it by Modaco. There this is a solutionif you get error 57 when running some software. BUT and this is big, when I added the value my TOMTOM received a new Device ID so it asks to activate and this being the second device that I activate I have to keep on changing the value to 0
Does anyone have for me maybe cracked version of Tomtom 5 mobile v5.20 for Windows smartphones with QVGA display (not symbian)
Solution i've found was posted by Pagemakers on the Expansys forums...
http://www.modaco.com/Mteor-application-unlock-solution-t244205.html
Tested and working. Allows you to import root cert and also the stops the insufficient permissions when installing software.
MTeor unlock
howdy,
does anybody know how to unlock HTC MTeor?
seems to me that the device is unable to edit the registry.
(I'm installing a root certificate)
already installed on Qtek 8310 and 8500 but the registry on MTeor is uneditable..
Any suggestions ?
Thanks
Here is most "official" way of application unlocking of virtually any HTC produced device: one third of unlocker is made by HTC and remaining two by M$
Unzip to device and run in numbered order. Then check incoming sms folder* for the status report. If report is negative then your rom have non-default privileged OEM cert, flashing to something more standard would solve the problem.
* it is not real sms, just system notification placed in sms folder (nothing is transmitted over radio) you can perform unlocking with phone turned off and sim card removed to be shure
WM2003 > WM6 contacts etc problems ?
Hey ,
I just loaded WM6 on my o2 xdaIIs or Blue anger as you say,
now i have several issues in front of me:
1. the backup file ( 2 files individually created on WM 2003) from both " spb and x backup (inbuilt in WM 2003) " won't restore any thing i.e. contacts,Apps, notes anything on my new WM6.
i tried restooring from both the files but to no avail.
any solution how to get my contacts back.
Note: i didn't sync with my PC, so no contacts loading from syncing with pc
2. there's no send via bluetooth option in file explorer.
3. when dialing no.s from keypad of BA, the no functionality won't happen. i.e. only alphabets appear, but in WM2003 no.s did appear.
i guess you haven't really completed the upgrade to wm6. you should do the reset + no/yes/yes + mail button routine.
I already did the same, but the problem is from the beginning, is there any way i can get my contacts from the backup files back ???
and what about the keys issue !!! and bluetooth funda !
the only way is to switch back to wm2003 restore ur backup, sync ur contacts or save them on sim than put wm6 again get ur contact back.
Hi,
now i want to downgrade to WM2003,
but going to the wiki gets me confused, b'coz of the several ROM's there.
now the thing is i have O2 xda IIS, India, and i have the official O2 asia WM2003SE ROM downloaded from the website of O2, that has been made for my Mobile only, but now as i have WM6 and i guess while upgrading to WM6, i deleted the contry code etc...., so now the O2 ROM is not detecting my Mobile,
can anybody help me out here !!!
DO THIS
1. extract the file given below.
2. put the rom file which u hv downloaded from the o2 site (file=nk.nba) in the same folder where above files were extracted.
3. put ur pda in boot loader by holding Pwr+camera+rec+reset.
4. screen shows bootloader serial.
5. run maupgradeutilitynoid.exe (it will skip country id)
6. do a update by clicking next next and so on
I have something like this pb on my Qtek 9090. But i think after upgrade the contacts database is crashed cause any CM application terminates immediately after being launched:
NullReferenceException.
at
Microsoft.WindowsMobile.PocketOutlook.PoomStore.Di spoze()
at
Microsoft.WindowsMobile.PocketOutlook.PoomStore.Fi nalize()
ActiveSync refuses to synchronize contacts giving error 8007000E.
what do you call the bar of alphabet on the right side which appears when your scroll thorugh a big list.....???
сan any one point out the links to cabs to install it???
any recommendation for the cleanest rom for HTC TYTN II ??
ps: recently after flashing to new rom....notice that it's not included.....
The app is called HTC Random Access. Most of the cooked ROMS have it, I don't think any of the HTC OEM ROMS do.
My advised ROMS for you:
Stock: http://forum.xda-developers.com/showthread.php?t=439408
Cooked: http://forum.xda-developers.com/showthread.php?t=397121
-Mc
how to render a card reader????
McHale said:
The app is called HTC Random Access. Most of the cooked ROMS have it, I don't think any of the HTC OEM ROMS do.
My advised ROMS for you:
Stock: http://forum.xda-developers.com/showthread.php?t=439408
Cooked: http://forum.xda-developers.com/showthread.php?t=397121
-Mc
Click to expand...
Click to collapse
thanks for the fast reply!!
i'm using hyperdragon lite rom now....
how ever somehow softick card export is not working....
my pc kept on installing the driver for it for the first connection....
after some time kaiser hang......
and on second connection the pc show that it is connected.....but i can't explore the sd card cos there's no link from my computer .....
normally i would search for autorun.....but after rom update to hyperdragon it stopped working.....
still trying the search to look for fix...........
anyone??????
ps : w5storage not working tooo....
only hope at the moment....pocket controller through the file browser option???
this is really a pain!!! cos i don't have a card reader......
active sync could do some transfer but it's slow and limitation with the file size.......
edit: some one pointed out that in order to use card export, a usb2pc.exe file need to be in the /windows folder.....
anyone can kindly verify this????
or please kindaly upload a copy of that file so that i can try it my self......
(no rapidshare or megaupload servers.....they don't work for me)
Hi can anyone help me, i installed windows mobile 6.5 on my touch htc and now its expired i cant do anything to literally i cant even connect it to the computer to install new version ((
Someone heeeeeeeeeeeelp
teonik_ge said:
Hi can anyone help me, i installed windows mobile 6.5 on my touch htc and now its expired i cant do anything to literally i cant even connect it to the computer to install new version ((
Someone heeeeeeeeeeeelp
Click to expand...
Click to collapse
remove remove
teonik_ge said:
Hi can anyone help me, i installed windows mobile 6.5 on my touch htc and now its expired i cant do anything to literally i cant even connect it to the computer to install new version ((
Someone heeeeeeeeeeeelp
Click to expand...
Click to collapse
what rom u flash? what u can do go to bootloader and then flash a new rom see my sig. the guide by CRACKWHORE
Hi , everyone.
I have such problem. Today my WinMob 6.5 Expired.
I know how to flash from storage card - it's not a problem. But I don't want to lose information. Is it possible to:
1) Create a custom ROM, which changes only one file (with time bomb) just like Boot Screen change o radio ?
2) access to device storage (Not SD Card) without activesync?
3) make some ROM-file which change only current time?
4) Flash a device with ROM but not to lose any information ?
5) Update WinMob on device ?
or everything is no dice?
Ptitz said:
Hi , everyone.
I have such problem. Today my WinMob 6.5 Expired.
I know how to flash from storage card - it's not a problem. But I don't want to lose information. Is it possible to:
1) Create a custom ROM, which changes only one file (with time bomb) just like Boot Screen change o radio ?
2) access to device storage (Not SD Card) without activesync?
3) make some ROM-file which change only current time?
4) Flash a device with ROM but not to lose any information ?
5) Update WinMob on device ?
or everything is no dice?
Click to expand...
Click to collapse
ergh, no. Look like you'll have to flash new rom mate
teonik_ge said:
Hi can anyone help me, i installed windows mobile 6.5 on my touch htc and now its expired i cant do anything to literally i cant even connect it to the computer to install new version ((
Someone heeeeeeeeeeeelp
Click to expand...
Click to collapse
here is my opinion: (You must update to HSPL 1.56 before doing this, it's very important and make sure your battery is at least 30%)
First you need to have the Micro SDcard which help you connect to your SD card and your PC
Second, please make sure you had formatted your SD card first by FAT32 (right click on "Secure SD card" disk and choose Format--->Fat32---> start (you can put all of files in your SD to 1 folder in your PC).Copy your new ROM ***.nbh and rename it to (BLACIMG.nbh) to your root of SD card (put it direct to SD card, dont put it in any directory files) (Very important)
Third, turn off your device by power button, insert back your SD card. Put and hold Power button + Vol Down until your device show " checking ..... BLACIMG.nbh". Then you press and release Power button to update a new Rom. After updating completed. Press reset button to restart your device. Now you have a new Rom.
You can watch this video for more practical information
http://www.youtube.com/watch?v=FbRboNeo2XE
Wish the best to you man