Database Develop

[Release 1.0 RC1] AKU 3.2 ROM

Hi everybody,
Basic Info
Here it is, finally, the first RC (Release Candidate) version of AKU 3.2. This ROM contains the following:
- AKU 3.2 ROM based on the T-Mo 2.26 ROM
- Cingular 2.25 radio (since it is the best)
- Totally empty extended ROM (since this is a clean base ROM)
- Cingular bootscreen (because, uh, blue looks much better than pink )
- NO IPL/SPL so G4 owners can flash it as well
What's new in AKU 3(.2) since AKU 2.3?
- 2x zooming for videos in WMP (added in AKU 2.6)
- Slightly faster device
- Slightly improved boot time
- AKU 3 improvements are:
- Internet Sharing utility instead of Modem Link
- WPA2 support for WiFi Note: not working yet
- Improved BT Stack
- vCard support in SMS
- SMS can be saved to the SIM Card
- SMS over GPRS (if your provider supports it)
- MP3 ringtones for everything (Phone, SMS, events) Note: not working yet
- Improved welcome exe (can skip tap'n'hold tutorial, can set up email account, can set the time)
You can read more here.
Requirements
You MUST have a 2.x IPL/SPL on their devices. If you have 1.x, install first a 2.x ROM that has one.
Known bugs
- There may be problems with ActiveSync internet pass-thru
- Microsoft Voice Command will not work.
- No A2DP
- No WPA2
- MP3 still only for Ringtones
- Problems with SPB Pocket Plus
Disclaimer
While it is really hard to brick your device with this package (since it is not touching the bootloader aka. IPL/SPL), still, standard disclaimer applies: Flash this ROM at your own risk!
What's next?
When I'll have enough time I might make a ROM with extra stuff but that ain't gonna happen till this weekend or so.
Download
WM5 AKU 3.2 ROM version 1.0 RC1 for HTC Wizard (49.5 MB)
Extra note
This rar was created with WinRar 3.6 final. It is possible that you get errors at decompressing with older version so if that is the case, go to http://www.rarlab.com and install the latest version the try again.

GREAT WORK KTAMAS!!!!
Downloading now... I'll let you know as soon as i'll have it installed!
Bye!!!
PS: Is the CF2 included in this rom? If it is not and you want to integrate it, i can send you the files and a cab containing the necessary registry entries.
Bye

risidoro said:
GREAT WORK KTAMAS!!!!
Downloading now... I'll let you know as soon as i'll have it installed!
Bye!!!
PS: Is the CF2 included in this rom? If it is not and you want to integrate it, i can send you the files and a cab containing the necessary registry entries.
Bye
Click to expand...
Click to collapse
No CF2. Sure, you can email me the packages, thanks.

KTamas said:
No CF2. Sure, you can email me the packages, thanks.
Click to expand...
Click to collapse
I'll send you shortly.
So far:
Activesync USB (NDIS): OK
WiFi: ok
GPRS: ok
Phone: ok
Bluetooth: not yet tested (BT PAN is supported! Great!)
MMS: you need to enable it using one of the cabs found in the 2.26 extrom
All default programs are ok!
SO FAR IT'S GREAT!

Hot! I'm going to be giving it a shot shortly here.. Going to go download it now..
EDIT: Hot.. Upgraded now.. Like the green.. Will be testing everything out very very very very soon here..

Great job, guys!
Damn, i don't have my Wizard at the moment.
Looking forward to get it back and try this stuff!

I always get error 224... what am I doing wrong?

digitaly said:
I always get error 224... what am I doing wrong?
Click to expand...
Click to collapse
What is Error 224 exactly? :roll:

finally working aku 3.2
just flashed on cingular 8125, everything seems fine

Extened Roms
Hi there, I'm a bit of a newbie. How do I install an extented rom?
Ta, Rin.

Connectivity Issues.
I have a Cingular 8125.
Upgraded from AKU 2.3 (TMO USA 2.26 OS) to this.
==================================
THE GOOD:
ActiveSync works fine syncing data with my PC.
SMS (Text Messages) work both in and out.
Phone Works.
Bluetooth Works with my normal headset (Jabra BT500).
THE BAD
Internet connection won't work. I have proper GPRS Settings for Cingular (tried both ISP & WAP settings) but the connection fails always (saying the answering modem has disconnected).
When I try to use AS Pass-through it simply can't find the page.

I have tried your ROM, but unfortunatelly it flashed only bootimage (Cingular) and cleared ExtROM from Vario (from T-Mobile CZ) of my boss...
Any help? Thanks.

i added this to my beta rom.. i am installing now to test

Re: Connectivity Issues.
kyphur said:
.
THE BAD
Internet connection won't work. I have proper GPRS Settings for Cingular (tried both ISP & WAP settings) but the connection fails always (saying the answering modem has disconnected).
When I try to use AS Pass-through it simply can't find the page.
Click to expand...
Click to collapse
as pass-through and wi-fi working for me. didn't try gprs

Re: Connectivity Issues.
kyphur said:
I have a Cingular 8125.
Upgraded from AKU 2.3 (TMO USA 2.26 OS) to this.
ActiveSync works fine syncing data with my PC.
SMS (Text Messages) work both in and out.
Phone Works.
Internet connection won't work. I have proper GPRS Settings for Cingular (tried both ISP & WAP settings) but the connection fails always (saying the answering modem has disconnected).
When I try to use AS Pass-through it simply can't find the page.
Click to expand...
Click to collapse
Hmm, I've set up my GPRS account and first it connected, but didn't load anything. Did a soft reset, now it works well.

Re: Connectivity Issues - GPRS Dead
itissat said:
kyphur said:
.
THE BAD
Internet connection won't work. I have proper GPRS Settings for Cingular (tried both ISP & WAP settings) but the connection fails always (saying the answering modem has disconnected).
When I try to use AS Pass-through it simply can't find the page.
Click to expand...
Click to collapse
as pass-through and wi-fi working for me. didn't try gprs
Click to expand...
Click to collapse
I did a soft reset and AS Pass-through is now working. GPRS is still Dead though.

KTamas said:
digitaly said:
I always get error 224... what am I doing wrong?
Click to expand...
Click to collapse
What is Error 224 exactly? :roll:
Click to expand...
Click to collapse
I unlock the cid... after I click on PDA Phone ROM Update utility I get this error 224... but my phone sync and I can read all the files from my computer no problems... It's must be a problem related to the my activeSync 4.2.0

Re: Connectivity Issues.
kyphur said:
I have a Cingular 8125.
Upgraded from AKU 2.3 (TMO USA 2.26 OS) to this.
==================================
THE GOOD:
ActiveSync works fine syncing data with my PC.
SMS (Text Messages) work both in and out.
Phone Works.
Bluetooth Works with my normal headset (Jabra BT500).
THE BAD
Internet connection won't work. I have proper GPRS Settings for Cingular (tried both ISP & WAP settings) but the connection fails always (saying the answering modem has disconnected).
When I try to use AS Pass-through it simply can't find the page.
Click to expand...
Click to collapse
It seems that AKU3 has a nasty bug: it fails to connect to a GPRS APN if it requires username/password. GPRS works for me cause my provider needs no UN/PW.
Edit: On the other hand, AS Passthru is not working for me.

beecher said:
I have tried your ROM, but unfortunatelly it flashed only bootimage (Cingular) and cleared ExtROM from Vario (from T-Mobile CZ) of my boss...
Any help? Thanks.
Click to expand...
Click to collapse
What IPL/SPL version do you have?

Re: Connectivity Issues.
KTamas said:
It seems that AKU3 has a nasty bug: it fails to connect to a GPRS APN if it requires username/password. GPRS works for me cause my provider needs no UN/PW.
Click to expand...
Click to collapse
Is this documented anywhere?
If that is the case then it looks like I'll probably have to exclude myself from this project (which would blow chunks).

HTC Wizard100 not responding after 2_47_11_radio installation

Hi,
I am using HTC wizard 100 with following setup
IPL 1.01
SPL 1.08
GSM 01.12.10
ROM 1.5.4.2 WWE
Radio 01.12.10
Today I tried to install 'radio only' - 2_47_11_radio.
After this my pocket PC is not responding at all.
When I start my cell - it's getting stuck on windows mobile screen, with passowrd on top left corner of task bar and network, speaker and clock displayed in the task bar.
I have goodlink installed in my phone which prompts for the password when I start the phone.However as because it's stuck on the windows mobile screen I am not able to enter the goodlink password also.
And when I reboot GSM information is missing from the initial screen. I am not able to connect my phone using USB cable also.
Can anyone please let me know what I did wrong because of that my phone stopped working. And is there anything that can be done to get it working again.
Thank you for your help and support!

I would say go back to 02.19.11, its so much better then the ones after!!!!

Does anyone know why the sound is gone after increasing the volume up to its maximum?
I'm Using the 12 mb version ,anyone with the same problem?

Hi funman!
Thank you for your reply. Could you please help me out how to get the 02.19.11 installed, as I am not able to connect my phone through USB/ActiveSync. It's stuck on windows mobile screen.
Thank You!

Ok hold the voice button and re-set your phone. Still holding the voice button press the power button till the phone comes back on! Now you should get the boot screen now you just have to connect your usb and there you go run the update prgramm on your computer with the new rom and let it do its stuff!
I had the same problem, and i thought to my self crap. But i was able to down grade my radio rom!!! So dont worry you are able to save your phone!

prince007 said:
Hi,
I am using HTC wizard 100 with following setup
IPL 1.01
SPL 1.08
GSM 01.12.10
ROM 1.5.4.2 WWE
Radio 01.12.10
Today I tried to install 'radio only' - 2_47_11_radio.
After this my pocket PC is not responding at all.
When I start my cell - it's getting stuck on windows mobile screen, with passowrd on top left corner of task bar and network, speaker and clock displayed in the task bar.
I have goodlink installed in my phone which prompts for the password when I start the phone.However as because it's stuck on the windows mobile screen I am not able to enter the goodlink password also.
And when I reboot GSM information is missing from the initial screen. I am not able to connect my phone using USB cable also.
Can anyone please let me know what I did wrong because of that my phone stopped working. And is there anything that can be done to get it working again.
Thank you for your help and support!
Click to expand...
Click to collapse
It's known that 2.xx radios won't work with 1.xx IPL/SPL. Make sure you have unlocked your phone properly, then upgrade to a AKU 2.xx ROm before you upgrade your radio to 2.47.11

vseehua said:
It's known that 2.xx radios won't work with 1.xx IPL/SPL. Make sure you have unlocked your phone properly, then upgrade to a AKU 2.xx ROm before you upgrade your radio to 2.47.11
Click to expand...
Click to collapse
you can get the newest version of youre carriers ROM from www.HTC.com you just have too lok around to find it... should be something like "support by carrier" or something and then in the "downloads" section. good luck
P.S. i dont believe that the phone has to be unlocked to do the carriers shipped roms... my cingular 8125 was NOT CID or SIM unlocked and it worked just fine.

No Activesync After Button 1.05 Romload

I cannot get activesync4.5 to link up to wizard after loading button rom. IPL is 1xx and spl is 2xx. I am not sure what to do next with this since I cannot cid unlock without getting a connection with as. I have not found any definitive answers anywhere, and I have been reading alot, and then I read alot more. I have cleared the temp folders I have ran chkdsk I have manually started as on ppc. I really could use some help on what my next steps should be to get a link up from the ppc to the pc.

you're phone didn't flash correctly. put the phone in bootloader mode (hold the comm manager, the voice dial button, and hit the small hole on the side at the same time...should bring you to the tri-color bootloader mode) and reflash butons 1.05. you need to keep reflashing until BOTH your IPL and SPL are 1.05. having different numbers is not a good thing.

monkey_knight said:
you're phone didn't flash correctly. put the phone in bootloader mode (hold the comm manager, the voice dial button, and hit the small hole on the side at the same time...should bring you to the tri-color bootloader mode) and reflash butons 1.05. you need to keep reflashing until BOTH your IPL and SPL are 1.05. having different numbers is not a good thing.
Click to expand...
Click to collapse
This is an 8125 and I have been able to get to the bootloader screen by pressing the camera button and power together. I have an IPL of 1.01 and an SPL of 2.25. I have flashed the phone 3 times now and there has been no changes as to the SPL as of yet. I will go for another round on it. Has anyone else encountered this problem with G3 8125 Wizard??? I have seen similar problems while reading through the forums, although no solutions.
When you press the comm manager voice dial button and press the small hole on the side that is for a hard reset right? Anyways I have reloaded the button 1.05 rom and it still has 2.25 SPL any ideas????

amsatnetg said:
Anyways I have reloaded the button 1.05 rom and it still has 2.25 SPL any ideas????
Click to expand...
Click to collapse
yes. flash the original 2.25 you had before or the wizard love 2.26 (assuming your phone is already CID unlocked)

mestrini said:
yes. flash the original 2.25 you had before or the wizard love 2.26 (assuming your phone is already CID unlocked)
Click to expand...
Click to collapse
how can it be cid unlocked if I have not succesfully gotten the phone to connect with activesync4.5 to be able to load the enablerapi file and run the lokiwiz.02b bat file??? This lack of connection to the AS is where I am stuck. From the read first sticky I should be loading the enablerapi file on and running the lokiwiz.bat file. I am not making a connection between the phone and the computer to be able to do that, at this time. I have now loaded the button rom on the phone 5 times and still no change in the SPL. What am I missing here????
One other thing that I noticed is that when I plug the USB into the Wizard it immediately trys and succesfully sets up a local area connection. It is currently set up as local area connection 5. This connection says that it is a windows mobile based device connection. What do you all make of this one??
currently these are my boot readings
IPL 1.01
SPL 2.25
GSM 01.12.10
OS 1.5.4.2
Cingular/ATT Customer
8125 HTC Wizard
MODEL 100
UPDATE!!!!! So the answer to my own thread for anyone that will run into this problem, for myself, was to load the button rom then remove activesync program from xp, then without reboot redownload activesync with the phone connected to usb, if it still does not come up reinstall button rom without reboot. Also disable ALL firewall and antivirus programs. This should get the activesync to see your device, and then it will try to connect. Just cancel the attempted sync connection and you will be on active sync as a guest. I hope this will help out some newbies.

I am experiencing the exact same issue. Any ideas??

Uninstall ActiveSync 4.5 and install an older version.
AS4.5 seems to have problems with some WM5 devices.

starkwong said:
Uninstall ActiveSync 4.5 and install an older version.
AS4.5 seems to have problems with some WM5 devices.
Click to expand...
Click to collapse
I tried 4.5, 4.2, and 3.8 all without luck. Any other ideas?

Tried on another XP machine and it worked using ActiveSync 4.2.Now if I can get activesync to connect to WM6 ...

Finally someone mentions the OS on the PC. That will help alot you know. well hope all is sorted out! Good luck

Well i've tried several different versions of activesync (3.8, 4.2, and 4.5 which is needed for WM6) uninstalling rebooting, connecting the device several times, rebooting both the laptop and the phone, and nothing seems to work on my newer Core 2 Duo laptop. It simply will not connect to the phone. It worked perfect _before_ the downgrade to the Button ROM though using activesync 4.2 and 4.5 to the Cingular ROM.
All works perfect on my older P4 laptop though, both run Windows XP SP2 btw. Button ROM connected first try. I'm thinking something may be wrong with the OS on my new laptop, so I may have to blow it out and start all over since it's the one I need to sync with...
At least I got the XDA WM6 r2a Rom, IPL/SPL 3.08, and Faria 2.69.11 installed and working without a hitch on the 8125 so its fully usable now. Now to keep plugging away till I can sync it on my main laptop.
Frustrating!

where can I find active sync 4.2? I'm stuck just like he is.
I got IPL 1.01 and SPL 3.08
i'm in bootscreen right now trying to reflash it, but nogo.. I can't get a connection with activesync, so the romloader program is not getting a good connection

razorseal said:
where can I find active sync 4.2? I'm stuck just like he is.
I got IPL 1.01 and SPL 3.08
i'm in bootscreen right now trying to reflash it, but nogo.. I can't get a connection with activesync, so the romloader program is not getting a good connection
Click to expand...
Click to collapse
Look here:
http://www.microsoft.com/downloads/...3a-28bf-4cac-a682-58d3233efb4c&displaylang=en

HardSPL issue with 8125 G4 and 2.21.olip

I've been trying to find a thread that addresses my issue but have'nt been able to find anything addressing my issue.
I wanted to upgrade my 8125 G4 (IPL/SPL 2.25.0001) to WM6 so I tried the guide for "newbies".
I have windows XP and Activesync 4.45. I was able to establish a connection with my 8125. I ran the HardSPL and it confirmed my device is G4 and it went to the utility.
I followed the utility and was able to reconnect and reestablish connection with activesync. after rebooting my phone the IPL is 2.21.0001 but the SPL is still 2.25.0001. Can you tell me why it did'nt change to
2.21.olip?
I then tried rerunning HardSPL but when the utility asked me to reconnect and establish connection with activesync activesync does not discover the phone. Otherwise am able to use my phone just fine and can even activesync with my laptop.
I did not continue to other steps for fear of bricking my phone since the guide says not to continue if SPL isn't 2.21.olip.
Can anyone please help me get back on my way to WM6?
Thanks
my phone is:
Rom 2.25.11.1 wwE
radio 02.25.11
Protocol 4.1.13.12
ExtRom 2.25.11.102

brent39902 said:
I've been trying to find a thread that addresses my issue but have'nt been able to find anything addressing my issue.
I wanted to upgrade my 8125 G4 (IPL/SPL 2.25.0001) to WM6 so I tried the guide for "newbies".
I have windows XP and Activesync 4.45. I was able to establish a connection with my 8125. I ran the HardSPL and it confirmed my device is G4 and it went to the utility.
I followed the utility and was able to reconnect and reestablish connection with activesync. after rebooting my phone the IPL is 2.21.0001 but the SPL is still 2.25.0001. Can you tell me why it did'nt change to
2.21.olip?
I then tried rerunning HardSPL but when the utility asked me to reconnect and establish connection with activesync activesync does not discover the phone. Otherwise am able to use my phone just fine and can even activesync with my laptop.
I did not continue to other steps for fear of bricking my phone since the guide says not to continue if SPL isn't 2.21.olip.
Can anyone please help me get back on my way to WM6?
Thanks
my phone is:
Rom 2.25.11.1 wwE
radio 02.25.11
Protocol 4.1.13.12
ExtRom 2.25.11.102
Click to expand...
Click to collapse
Did the HardSPL completed successfully ? did the screen go white for awhile.If it didn't,then rerun the HardSPL again,but disable or shut down any Antivirus or firewall and any other heavy application or program running in the background while applying HardSPL sometimes create problems also.Reset the phone,reset the pc and close all programs/applications from the desktop through 'Task Manager' and don't surf the net or do any other operation during HardSPL,let it complete the whole process,if the screen goes white,don't panic its the essential part.

HardSPL did complete successfully.
The screen on the phone did change to white.
I had the windows firewall off and antivirus disabled also. i think i did have internet explorer open at the time however.
I will try again running it with no background programs running and see what happens.
Are there any known services or background applications that prevent a successfull HardSPL installation?

Help Downgrading WM6 to WM5 Cingular 8125

Hi,
I have a Cingular 8125 phone, I upgraded it WM6 with one of the ROM that I downloaded from xda forums. I do NOT know which one that I downloaded. I remember downloading and installing one of the T-Mobile stuff, then flashing a new WM6 ROM from this forum. My phone locks up every time AFTER I receive/make a phone call. I would like to go back to stock WM5. I have no idea how this works, but it appears that I am running the risk of bricking my device if I do it wrong. Any help would be appreciated. Following is the details of what I have.
During BOOT it shows
T-Mobile Logo
IPL 3.08
SPL 3.08
GSM 2.25.11
OS 6.1.0.0
After boot,
About page says Windows Mobile 6.1 Professional
Device Information page says,
ROM Version: 6.1.0.0 WWE
ROM Date: 1/16/08
Radio Version: 2.25.11
Protocol Version 4.1.13.12
Thanks,
JSenthil

no problem, just flash he original rom.
I have it, from mda t-mobile.
I think i have from cingular to, if you need it, let me know.

Isn't that I first have to downgrade my SPL/IPL to 2.xx in order for the original WM5 to work on my G3 wizard?
Can you please explain the steps involved? BTW, where can I find the original ROM, are you referring to the one that can be downloaded from the HTC website?
Thank you for your help,
JSenthil

Unfortunately I installed iPhone skin onto my Cingular 8125. I would like to revert process and get back my WM5, but I tried "hard reset" (Comm Mng + Voice buttons and poke reset with stylus) and nothing. Keeps going back to the iPhone skin. Few things do not work, still has scroll bar on side, connection and battery icons and no lock mode. Contact list feels like iPhone, but is not well developed, still has bugs and menus to la-la land.
Please help, I don't know much about WM5 or cell phones.
Thanks!
rapanui

ricomilion said:
no problem, just flash he original rom.
I have it, from mda t-mobile.
I think i have from cingular to, if you need it, let me know.
Click to expand...
Click to collapse
ricomilion,
Could you hook me up with the Cingular/At&t original WM5 ROM?
Thanks,
daveetrice

Yes, id like the cingular wm5 stock rom as well if possible...im having problems after "upgrading" to wm6 too.

WM6
Can someone help for locate the WM6 ROM for the 8125 also WM5 so I can scale back if 6 hoses up my phone? Thanks.

Maybe my ROM's would work for you guys

Cingular Official stock wm5 Rom :-
http://www.htcamerica.net/support/8125/software-downloads.html
http://download.america.htc.com/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe