Database Develop

NO WIFI connection after upgrade RUU_Prodigy_2170706 FRE

Anyone has an idea how to solve this?
i have installed the new RUU_Prodigy_2170706_21707106_20710_QTEK_FRA_Ship ROM on my qteck9100 and all went fine, all works perfectly execpt WIFI
Now each time i want to connect to my wifi network its goes on a neverending seraching, trying to connect end nothing.
I tryed wiht the WAP security on, without any security , without an mac adress filter but no way to connect.
i tryed also to go back to ROM RUU_Prodigy_2080702_102_11310_QTEK_FRA_Test that worked perfectly but i have an error message saying that the rom is not compatible with the device..
suggestions are welcome
thamks

sorry cant help too much, im in the same boat, tryed two different roms now, but no go
finds the network, asks if you want to connect, then after a few mins it stops trying to connect!
Also in the available networks list, they stay available even tho some of them i passed a mile or so ago in my car!

I finally could install RUU_Wizard_1050412_WWE_101_11210_WWE ROM and with the DJVW HTC Wizard Optimizer the Wifi wrok perfectly
with the old 2.08 test and the Optimizer,the wifi connection was fine.
Maybe with this last ROm 2,17 the Optimizer don't work ..

im running Custom_RUU_Wizard_1050402_101_11210_O2_ENG_CID.exe.html
but still not working for me, whats this, DJVW HTC Wizard Optimizer ? cheers

DJVW HTC Wizard Optimizer installed and still the same, ohwell,

I had the same problem until I adjusted the NIC power settings to favour better performance it would then connect..
I read somewhere on here that another user had to stand nearer to the AP to connect but once connected all was fine?

same issue for me ...

slurp said:
I had the same problem until I adjusted the NIC power settings to favour better performance it would then connect..
I read somewhere on here that another user had to stand nearer to the AP to connect but once connected all was fine?
Click to expand...
Click to collapse
i had the k-jam ontop of the router, and nothing

I tryed the WIFI connection in a public place with a provider called
"monzoon" and its worked fine.
As this acces is a 802.11b i start really to belive that "Wizard optimizer" do not work with the new ROM
At home with my Belkin Pre-N router that works only on mode "G" and "B+G" i still have no connection.
There is no change if i change performance setting and by the way with the piblic network i was on "best battery" and not on "best performance"

T-Mobile Wings WIFI Problum

my T-Wings give me WIFI problums coz i always Conact WIFI network on my work place but mostly time wifi show its conncted but not working .. but after reset some time its work or some time not
some1 know whtz wrong ?

maliks said:
my T-Wings give me WIFI problums coz i always Conact WIFI network on my work place but mostly time wifi show its conncted but not working .. but after reset some time its work or some time not
some1 know whtz wrong ?
Click to expand...
Click to collapse
have you tried accessing any other wifi connection outside of your workplace ? does it give you the same problem ?

Wifi problums
yes but i didnt face problum other places but on work place its working befor fine

problem with T MOBLE WING
I have the same problem , I even did try connect to my home Wifi it show connected ,but doesn't open to the website I want to ,can some one help,thanks

I had the same problem, I installed batterystatus, and checked the option to disable gprs when wlan is on, and now it works fine...
You don't need batterystatus to do this (the software just does it automatically for you), you can do it by yourself by disabling "data connection" in the connection manager whenever you turn on the wifi radio
-Hope it helps

t-mobile wing wifi problems
I had a similar problem with my wing. It would connect to unsecured WIFI networks and work flawlessly but when I connect to a secured network it would work for about 1 min then just hang while downloading a web page. If you device is doing this send it back to t-mobile and get a new one. This is what I had to do. hopefully you have a warranty.

I just got my T-Mobile Wing and I think I have the same problem. It just doesn't want to work with my WPA-secured Wi-Fi. When I switch WPA off, it works fine.
Did anyone else had a problem like this?
Called T-Mobile, they have nothing like that in their knowledge base.

I got this problem when i installed HTC 10 Button comm manager. I uninstalled it and WiFi works again.
Hope this helps

i have somewht of a similar problem, since ive had my Wing i have been unable to use my wi-fi, when i turn it on it says connected and shows me the lil meter and everythin but when i try browsing or downloadin it just hangs and does nothing until i turn the wi-fi off...i have no clue why i have learned to live without it but would appreciate any help...thanks

Try this it work for me. Whenever you want to connect to secure wpa do this before you make the connection
Start > Setting > Connections > Wifi Status > Power Mode > Move the slide "Best Performance"
Your wing should be able to connect to secure wpa.
Hope this help.

timace said:
i have somewht of a similar problem, since ive had my Wing i have been unable to use my wi-fi, when i turn it on it says connected and shows me the lil meter and everythin but when i try browsing or downloadin it just hangs and does nothing until i turn the wi-fi off...i have no clue why i have learned to live without it but would appreciate any help...thanks
Click to expand...
Click to collapse
Make sure you disconnect from edge/gprs before you try to surf after you are connected to the wifi.

ivanmmj said:
Make sure you disconnect from edge/gprs before you try to surf after you are connected to the wifi.
Click to expand...
Click to collapse
how exactly do i do this? is it what was explained about in the battery status menu and check marking the box 'disable proxy for wi-fi'...?

You can click on the little E or G on top and click on Disconnect.

ivanmmj said:
You can click on the little E or G on top and click on Disconnect.
Click to expand...
Click to collapse
i dont know how i ever survived without wi-fi....WOW....thank u

Thank Ayodeji13. He answered this in the 5th post. ^_^ But, yea, I've done the same thing before and was lucky to realize where the problem was coming from. Unfortunately, it didn't help me with the crappy wifi signal that my Wizard provided me. The wing, on the other hand, is MUCH better at this.

joking said:
Try this it work for me. Whenever you want to connect to secure wpa do this before you make the connection
Start > Setting > Connections > Wifi Status > Power Mode > Move the slide "Best Performance"
Your wing should be able to connect to secure wpa.
Hope this help.
Click to expand...
Click to collapse
Thanks mate... I too was having issues connecting to wifi... its kind of strange... it was connecting to my home network for sometime but later it suddenly stopped. It will connect to other networks but not to my secured network. Today I tried the setting you mentioned and surprisingly my phone connected to my home network... I wonder why because this setting should improve the performance and not the connectivity itself... Thanks again

you can add me to the list of people with wifi issues. I can't connect to my wireless router and I'm stand two feet away from it. It shows up but when I try to connect it says unavailable. I've done everything from turning the data off, to setting the power to best performance but it won't connect.

I need help... Whenever I connect it says I'm connected but actually I'm not. Yesterday I could view directions using live search but couldnt browse the web, not i cant do both. it gets stuck on the locating... part of loading the website. sometimes it gets to opening but the KB bar doesnt come up and it gives me some 500 internal error, or page doesn't exist. I cant do the best performance thing because im using touch it 2.3 rom and i dont have wifi status anymore.
WHY DO YOU HAVE TO REMOVE THAT STUF?!! URGH! I dont even have msn!
But anyways, can someone help me connect to the internet?...

TRY THIS
I have the same problem, i i manage to fix my wifi connectivity by editing the registry.....try this at your own risk.....but swear it works for me. i used total commander to edit registry and go to:
HKEY_LOCAL_MACHINE > SOFTWARE > HTC > Comm Manager >
then you will see folders 0 - 8 or some only have 0 - 7 ,delete folders 6 and up ........ ( I JUST MOVE MINE instead of DELETING IT< I MOVE IT TO STORAGE CARD SO IF SOMETHIN GOFF UP I CAN JUST PUT IT BACK )....
SOFT RESET then try turn your wifi ON , connect to your network.... til me if this works for u guys...
i think the value of those folders are bum hehehehe thats why it wont connect......., after connecting to your wifi secured or not , it will create another folder and add those folders back by default...but this time the good settings lolz its worth a try !

Ok this is realy frustrating. My wing was getting on my secured home network and npw it dose not. I read all the post and have tried some (the ones that I could understand). I dont have the option under battery status to disable gspr or gpsr. And my system is vista 64 so total commder dosen seem to work for reg settings(edits). I can conect to unsecure networks but I cant to my hone (secure) network. I have in the past but it dsent ssem to work now?

Kaiser - Wifi Problem - Any solutions??

Hi everyone,
I got my new Kaiser (AT&T Tilt) last week, unlocked of course, and I have reformatted it yesterday, and since then, I am unable to get Wifi to connect to any network! The device shows me the available network and everything, but it says it's connecting to them and then it just says they're available
Any solutions? Suggestions?
-W.

TyTN X said:
Hi everyone,
I got my new Kaiser (AT&T Tilt) last week, unlocked of course, and I have reformatted it yesterday, and since then, I am unable to get Wifi to connect to any network! The device shows me the available network and everything, but it says it's connecting to them and then it just says they're available
Any solutions? Suggestions?
-W.
Click to expand...
Click to collapse
same here.... but no solutions yet....

What ROMS/Radios are you using?

Actually, a solution that would work is to power cycle the device (remove the battery for a few mins out of the device, put it back in, and run again) however, I am not sure about this solution as it may be a temporary one!
The ROM I have is:
1.57.502.2
Radio:
1.27.12.11
Any suggestions on the ROM/Radio?
-W.

just a suggestion of what works for me.......my POS router, i can only connect to it if the wifi power mode on the kaiser is set to best performance. same sh*t with the wizard and the hermes. i seriously should get a new router

i had the same issue. But today i triedd q-mobile rom, which has a different radio than before. It works now. I am finally connected to my router. I have a Tilt as well.

I've noticed variations in performance and willingness to connect to APs depending on the Radio version. On 1.27.12.32 it would sometimes connect, other times not - and take a long time! On 12.17 it connects pretty quickly to most APs. If it doesn't, I turn Wifi off, then on.

Actually, It used to connect to the same network (probably different AP) with no problems at all!
I encountered the same issue today, and even after a powercycle the same thing happened..

BiPolarXpress said:
i had the same issue. But today i triedd q-mobile rom, which has a different radio than before. It works now. I am finally connected to my router. I have a Tilt as well.
Click to expand...
Click to collapse
I had the same problems you guys had. tried to connect then would say available.
i took your advice. first i tried to install the radio that comes with the q-mobile. i couldnt install it to my phone, the screen would black out.
next i went ahead and installed the latest version of q mobile. now it works. and btw q mobile is one fast freaking rom! the screen goes from landscape to portrait in a flash!
thanks!

Mine abruptly started not connecting to any network as well. I'll try the powercycle idea. I have the AT&T standard ROM.

ranger47 said:
Mine abruptly started not connecting to any network as well. I'll try the powercycle idea. I have the AT&T standard ROM.
Click to expand...
Click to collapse
So if I powercycle it it works, except that when I try and connect to what wifi it works for a minute or so and then causes the same problems.

ok, need help with my wifi also, if I go to Wireless Lan settings it says LAN is off, and has a link to click to turn it on, I click it and it connects, shows info including signal strenth, then it disconnects.........it wont stay connected

jsnone1 said:
ok, need help with my wifi also, if I go to Wireless Lan settings it says LAN is off, and has a link to click to turn it on, I click it and it connects, shows info including signal strenth, then it disconnects.........it wont stay connected
Click to expand...
Click to collapse
I am facing the same problem. anyone help?

Hmm, sounds like the same problem I was having. See http://forum.xda-developers.com/showthread.php?t=366526
Not really a fix but a better workaround than having to reboot all of the time.

Wifi Problems with TyTn II
I have a HTC TyTn II and i have some problems with "wlan".
I cannot connect with my router.
I tried it even withouth a security key but it says connecting and for the rest nothing happens.
Ive resetted my router to default settings so everything is open but still i cannot connect my phone to the router.
My router brand is:SMCWBR14S-N2.
Details of my Phone:
Rom version: 1.56.404.6
Rom date: 08/28/07
Radio Version: 1.27.12.32
I hope you guys can help me, Thnx

Hi,SMCWBR14S n2 router the same problem for me but when i turn it to 802.b it works.
I think there is something in the mixed mode what the pda dont respect.

I have a similar problem, but with a twist.
When I'm at my parents, I can connect to their BT Homehub Wifi with no problems at all, even on power-saving wifi mode.
At my house, I have a Siemens Wifi router (from Tiascali), and I cannot connect to this (says it is available, shows signal strength, but won't successfully connect) unless I turn off the encryption/security key.
The only difference between the two networks (apart from the names) is the BTHomehub uses 64bit WEP key and the Siemens uses WPA-PSK key (AES/TKIP not specified in router setup page). I can change the key method on the Siemens to 64bit WEP, but it still won't connect. My laptop connects without problems to both networks.
Is this a problem with encryption handling by the Kaiser?
ROM: Dutty's WM6.1 WWE 29/04/08
Radio: 1.65.14.06 (tried the other radio version of Dutty's rom with same results)
Chris
edit: verfarkas, that's something I haven't trued yet - I'll give it a go when I get home tonight. That would be a nice simple fix - by default, my Siemens router has the "b" (and other suffixes) chosen automatically.

Change to best performance
I was having all of the above problems until I set my power save mode to "Best Performance". Go to settings -> Connections -> Wireless LAN

Diamond Wi-Fi Problem

I have recently procured an HTC Diamond mobile and is facing the following problem:
I have a Linksys Router at home. When I switch on the Wi-Fi in my Diamond, it gets connected to the router. In the status, I can see the signal strength, Tx, Rx rate etc. But when I open the browser (both opera & IE), the web pages does not open. Error message stating check the url or does any other programme using the internet works? appears. Even my weather does not get updated. Using the same router, I am able to connect my laptop as well as my desktop to Internet.
When my diamond is synced using active sync, my mobile is able to connect to the Internet & Weather application also get updated.
Kindly help me to resolve this issue and make diamond connect to net using wi-fi.
Thank you in advance.

I have the same problem sometimes
I just changed parameter in settings -> connections -> wireless lan -> power mode -> "best performance" instead of "best battery" and it seems to work now.
I'm new to WM, so I don't know if it's a bug: when I don't use my phone I press the power button, or I wait it to go to "sleep mode" in 40s.
When I press power button to reactivate the screen, I can see in the first seconds that the wlan was disconnected and connects again.
So it seems that wifi is always disconnected when the phone is in sleep mode? That means no mails can be received ? Can anyone confirm?
Thanks

Hi there for both of you!
I had a connection problem with my Diamond at home. It was almost the same as tkak just I couldn't figure out whether ActiveSync connects or not. I managed to bypass this to set my routers DHCP timeout from 1 week to 3 hours and it all went away. The network status showed periodic connect/reconnect during the problem so it might be a different prob than yours.
Peio64:
WM6 keeps WiFi connection asleep during sleep mode. Imagine the battery usage if it was connected to WiFi all the time. So be happy with that and beside it is usable. WiFi automatically tries to connect to the closest hot-spot if it was connected before each time you switch on. Normally it shouldn't take more than 5-10 seconds and the whole process can be followed on the top bar.
Mails: Use DirectPush and GPRS connection and e-mails will arrive instantly. Google for setting this up. With Wifi I dunno - if you schedule ActiveSync for a periodic check whether your WiFi will be used or a new GPRS connection. I think GPRS can be used while the device is asleep but I'm not sure. Someone should test this. Probably whichever is quicker to build up a connection will be used for data transfer. (Note: on some forum I read that if you disable GPRS auto check with a tweak battery will last longer so I guess this means that GPRS is always connected.
Regs, Cina.

Does your diamond obtain an IP adress from your router, and is the connection setup as 'connects to internet'?

cina said:
Hi there for both of you!
Peio64:
WM6 keeps WiFi connection asleep during sleep mode. Imagine the battery usage if it was connected to WiFi all the time. So be happy with that and beside it is usable. WiFi automatically tries to connect to the closest hot-spot if it was connected before each time you switch on. Normally it shouldn't take more than 5-10 seconds and the whole process can be followed on the top bar.
Mails: Use DirectPush and GPRS connection and e-mails will arrive instantly. Google for setting this up. With Wifi I dunno - if you schedule ActiveSync for a periodic check whether your WiFi will be used or a new GPRS connection. I think GPRS can be used while the device is asleep but I'm not sure. Someone should test this. Probably whichever is quicker to build up a connection will be used for data transfer. (Note: on some forum I read that if you disable GPRS auto check with a tweak battery will last longer so I guess this means that GPRS is always connected.
Regs, Cina.
Click to expand...
Click to collapse
Thank you for your answer,
I had a SE P1i before, and wifi was connected all the time with push mail. With the diamond and its weaker battery, I set up my mails schedule to connect every 15 min so wifi only needs to be active every 15min, even in sleep mode, I don't want it to be connected all the time this is of course a battery waste.
HSDPA is connecting in sleep mode there's no problem with that, I just wish to use wifi for mails when I'm at home as my data plan is unlimited for web surfing but only 10Mo/month for pop/imap connections.
BTW I don't use the "keylock" option, is it different from sleep mode in this case? I can't see the advantage of keylock versus sleep mode

I had an ETEN M600 for ages before and I found that for sync it always used GPRS even if WiFi was available. The cause for this was GPRS was available while device is asleep so it can start syncing immediately after wake up (does it needs to wake up for sync?). So you probably have to switch GPRS (HSDPA) off while you're at home.
Keylock is for locking hardware buttons and touchscreen while it is active. (You won't dial up anyone from your pocket). It has nothing to do with sleeping just if you set up the registry tweak the device get locked (Keylock software is started) if you press power to send it to sleep. (I've almost written "off" but it is obviously not true - you can switch it off with a long press on power = soft reset).
Hope this helped a bit.
Cina

Okay thank you, I checked and HSDPA is connecting every 15min in sleep mode even with wifi ON. If I switch data off I suppose nothing connects and no mail is received, which is I think it's a weird behaviour.
By the way, I have set my data connection to swich off 10 seconds after not being used, and it works perfectly and reconnects automatiquely when it needs to. But for the wifi I can find that option, it's stays connected all the time when I use the phone, even if I don't need to. Is it possible?
Maybe it's due to the fact that it's always checking if there are new networks? On Symbian UIQ3, you can pre-configure networks, give manually priorities for each networks (1.Wlan work, 2.Wlan home, 3.3G etc..) and for each application (web, mail, etc). When the phone connects it checks if the network "1" is available, if it's not it checks the network "2", and once it's connected it doesn't check anymore. Is there a WM6 advanced network tool like that?
(Sorry for my english)

I did the following and now it gets connected to the web:
I just changed parameter in settings -> connections -> wireless lan -> power mode -> "best performance" instead of "best battery".
I do not know why this needs to be done like this.
Thankyou all for resolving my problem

I'm experiencing problems connecting to my WL Router (DrayTek 2820n) using WiFi when the router is set to Auto instead of to a specific channel. I've noticed from some threads for other mobiles that people are exprience similar problems. Does anybody knows what is the story around which channels are supported on WiFi: 1-11, 1-12 or 1-13. My router is set to 13 by default. In addtion to that Diamond has problem to connect to some channels even in the 1-11 range. So how can I check, which channels are supported and for which region?
Edit: I did further testing and it became obvious that when using Auto channel selection on the router, Diamond wouldn't connect. When selecting manually any channel between 1-11 it works OK, but when selection channels 12-13 it stops working, which makes me believe that the Diamond doesn't have support for the channels for non-US regions.

Does anybody have any idea how to change wifi region to support 12-13 channels as well? So far I couldn't find anything on the net that would help me doing it. Is it possible that it might be WM 6.1 issue and not Diamond?

HI I am actually having a diffirent issue but still related to wi-fi. When my phone awakes from sleep, it promts me to connect to my wi-fi server at home, when it was already connected jus minutes before. I have to re-enter the pass phrase everytime it awakes from sleep. This does not seem normal as my 6.0 touch didnt do that.
Any takers on this?

For more channels, it depend of US version or EU version. You need to changer your firmware but the problem is that in France for Internet you use PPoA and Belgium PPoE and I do not know if in the US they use the same so you will probebly losse your ability to connect to the Internet. Having more channels is not interesting because you need a hope of 5 between channels ( ex : ch1 + 5 = ch 6 and ch6 + 5 = ch11) between ch1 and ch6 place a ch11 for avoiding interferances. In 802.11g that is a question of scheme.
Sorry for my poor English.

Problem connecting to home network wifi
Hi, i've been using diamond to connect to my wifi home network but since few days is not possible anymore even if nothing was changed in the settings of the router.
The phone recognize the network as available, i push connect, it comes connecting but instead of connecting to the netwok it goes back to available.
Password is correct and the setting are the same as few days ago.
Any idea which setting should be modified?
Thanks in advance!
Panco76

Hello everyone,
I have one problem with my diamond. I disabled the "data transfer" with the improved comm manager. I usually use wifi when i'm home, however, i've seen that even though wifi is active, HSDPA connection is activated as well so i got charged, this sometimes happens when updating weather data or downloading emails.
Anyone with the same problem?

Yes - having he same problem.
I have WIFI at home and at work - so i want to use GPRS only when i am outside. never managed to do this - except when i kill GPRS fully - and even then Opera, the weather and push-mail wont work. :-(

WiFi Channels 12-13?
I need to bump up this issue again.
I can't find anywhere in this forum how would you change your WiFi channel range from US to EU (i.e. 1-11 to 1-13). My Diamond was purchased in Australia and I was hoping that the new SW upgrade would rectify that, but it looks to me that's not the case. Any idea if that can be done in registry?
Thanks.

Change Channel range from 1-11 to 1-13
***Bump***
Has anybody got any ideas how to increase the channel range from 1-11 to 1-13?

Hi, I am having a seperate problem from all that are listed. I have the linksys rangeplus router, and my Diamond wont even detect my network when it searches, yet my computer and PS3 do fine. Can anyone help me?

another problem...
Hi,
i have a problem with the wifi on my Diamond aswell..
I have a router at home which is encrypted. When I try to connect to it, I type the encryption key and it says Connected but i cant surf any pages. When i go back to wifi settings my home network switches between Not available and Connecting...
However, when i remove the encryption, everything seems to work fine. Since i dont want to treat my neighbors with free internet, does anyone have any tips for me?
(it is set to Best performance... +i'm sure i enter the right key...)
Thanx

The same over here... I found out, that some of cooked ROMs had this problem, but official worked. Before I couldn't connect via WPA2-PSK AES, all other encryptions worked. Until now... I tried to flash official ROM and RADIO, but it doesn't work anymore. I'm pretty sure it must be hardware problem. I need to send my Diamond to get fixed, but... The closest repair centre is in Prague (GSMobile)
!!!!!!!!!!!!!BUT BE AWARE!!!!!!!!!!!
I owned previously Qtek8310. After I send them my Qtek to replace the joystick, it came back with broken motherboard... This repeated 3 times and everytime they broke something else. I've got my Qtek8310 back as a total crap, destroyed and scratched... I called and send a claim to HTC Europe in London, but nothing happened since then. I don't believe them anymore. If you love your Diamond avoid to get it fixed in GSMobile!

Navigation software opening systematicly GPRS internet connection !?

Hi,
I use iGo8 and TomTom 7 and with both of these applications, everytime I close them I can see that they openend the GPRS connection (internet mobile)... my internet has no limit of use so it's not much of a money issue but the battery is going down pretty fast beacause of this background running data connection ...
Is there something I could do ?

Install nodata.cab from modaco

prdic said:
Install nodata.cab from modaco
Click to expand...
Click to collapse
Thanks for the reply. I tested the software you pointed out. It's a solution except that its pretty boaring to have to lock the internet connection everytime you need to use the GPS (for it's 15 to 20 times a day with a new adress) ...
Any idea on how to disable the connection only for the GPS software ?

EDIT : even with all connections disabled with nodata, the gsp still manages to open the connection !

I had exactly the same problem. I tried the same cab as you and it didn't work... I tired creating a bogus connection and selected it to try and stop the GPRS connection as someone else advised but a GPRS connection kept on opening itself...
Do what I did and flash a stock HTC ROM over your SFR one... It completely solved the problem for me.
You might want to dump the old SFR one first for guarantee reasons.

I use igo8 and it never turns on the GPRS connection.
I don't know if this is the cause, but can you check if assist GPS is ON or OFF?
Mine is OFF which is the default behavior...
If you don't have it, you'll need an app like "Advanced Config" in order to be able to see and change the A-GPS behavior

--Double post--- Ignore

This was the problem ideed. I have direct access to the A-GPS ON/OFF option in the parameters and it was ON. Switched it to OFF and the navigation software don't start the data connection now !
Thanks !