Related
hi all, i have been looking and asking questions all mornin on how to upgrade to wm5, so i downloaded needed files, hard reset my xdaIIs and run rom, with the baupgrade rom i get error 103 and with the maupgrade it runs for 20 secounds or so, says its comlete and to do another hard reset, and when i have done this nothin is different, please tell me where i am going wrong,
My device info is
rom version 1.40.00 WWE
protocol version 1337.42
Extrom 1.40.237 WWE
I take it my xda is still standard?
Thanks
Alan
wiki
pls read wiki
you need to formate the device
camera+recoder button thing
i did exactly that and had usb come up on screen but still no joy.
Cheers
hey
regarding the the maupgradeutnoid.exe, when your using it for the vry first time, you have to disable activesync first, put your device into bottloader mode, and put it ine the cradle... you could here a sound, wait till the device would be recognize and wait till a popup message telling you that the new device installed is ready to use and that's the time where you run the maupgradeutnoid.exe otherwise you'll keep on just getting that message that the upgarde is finished, well actually nothing has happened.
since, its your first time attempt of upgrading to wm5, you can use baupgrade.exe but be sure you have set the corect operator for your device. to know what is your operator info, just transfer the getdeviceinfo.exe to your device and run it, this .exe will generate devicedata.txt found in the windows directory of your device. tranfer it to your pc and read it from there, in my case I have an imate, my operator is CDL_01, remember this coz you will neede this when your upgrading to wm5.
in any rom that you can download in this site, there is an included bat file, setoperator.bat, and enter you operator info, after that your ready to run baupgradeut.exe with no problem... read the wiki for better understanding.. alwaysssssssssss read..............
Hi
I have a cingular hp 6515a . I cannot unlock it.I need an unlock hp 6515 rom image.please help me.
Unlock hp 6515
Thats very easy.
1: Download the (upgrade and unlocked) ROM from HP's website
2: HardReset your phone, but leave it in the first welcome screen (before the align screen and so)
3: Connect the phone to your PC, and wait for the connection to be established.
4: Run the downloaded Upgrade package (from HP), the phone will show a bootloader-screen.
Sometimes, the phone will not accept the upgrade program.
In that case do the following, but nothing else!
1: Disconnect the phone and soft reset it (it will come back into the bootloader)
2: Close the HP-upgrade program with taskmanager on your PC
3: Reconnect the phone to the PC
4: Rerun the HP ROM upgrade program.
Now your phone will show its upgrade status. It will take a while (about 20 minutes or so), but afterwards you will have a clean unlocked 6515.
I did this with several locked phones (especially Vodafone) from international sources.
Above will work fine, on every PC with Active-Sync (in my case 4.5) installed.
I assume, you will have a backup, made by the SIP-backup program on one of your memory cards. You can restore it after you've upgraded your phone
SKU error,, did not work
Unlock HP 6515
Did you use the rom you download here: HP 6515 ROM upgrades ?
I did it again today, but with a soft reset of the 6515 and shutting down the upgrade program with taskmanager. Do NOT Hard-reset the device or reboot your computer! Before restarting the upgrade, the computer has to reconnect to the 6515 although it is in the bootloader mode.
My hw6515 is dead after the upgrade to 1.21
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.
Has anyone managed to get this to work on a 6515 "A"? When I tried it I got an error message that said something like "Incorrect device SKU". I then decided to try upgrading to 1.20 which went smoothly. However, I still get the same SKU error message when trying to upgrade to 1.21. Is there a way to force it into bootloader mode? Anyone know some trick that I'm missing?
ROM Update 6515
SKU-error means wrong language.....
deivasankar said:
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.
Click to expand...
Click to collapse
Retry the update, or downgrade to 1.20
I Think Not..............
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
I've done it several times. The HP Roms contains also the RadioROM.
If you just think it cannot done... Why don't you give it try...
Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
What language do you use?
For WWE you wil find v1.21, v1.20, v1.12 and v1.00 here.
SKU ERROR help pls
cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
So how can we solve this problem?
Unlock and language change- this is how it worked for me!
This method worked for for an iPaq hw6515 after many long nights, but may be good as well for others:
Do this only from an Windows XP OS.
Make sure you have up to date ActiveSync from Microsoft!
To Unlock,
Just reflash your iPaq with the THE SAME language from HP official support site: h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=501212&lang=en&cc=us &prodTypeId=215348&prodSeriesId=501209&taskId=1 35
Connect your PDA to the computer and check it is in state connected in ActiveSync.
Download the current language ROM from the provided link, unpack, , and follow the instructions.
This official tool will do everything for you!
When it completes (~30 minutes), your phone will be unlocked.
After that if you need to change the language, follow this instructions:
How to change the language in your iPaq:
Here is the detailed process completed, borrowed from Barr :
1. Download and extract BOTH current and desired ROM language pack from HP site to the computer. Unpack them to different folders.
2. Establishing connection with the computer, copy EnterBL.exe (from desired language ROM folder) to the mydocument folder of the PDA.
3. Run the EnterBL.exe from the PDA. (Now your PDA will go to Bootloader mode).
4. (before executing step 4, prepare for step 5 since step 5 will have to be executed right after step4). From your PC, start updating the current ROM by lunching hpRUU.exe of the current installed language of your PDA.
5. Right after step4, when it will start updating, copy all the data (*.nbf) files of desired/intendedlanguage ROM pack to the current ROM pack. (the Rradio.nbf may be skipped if the device is already unlocked).
6. At the end of copying, it might show an error message, press OK to ignore.
7. The phone will restart!
Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
Same here i reflash again last night but upgrade process fails on .02%
Hey guys,
I am trying to upgrade my XDA to WM6.5. When following the wizard steps, I enter the PDA into the bootload menu, but when I run the application on my XP desktop, I recieve the following error:
Error 150: Rom Upgrade Utility Error
This ROM upgrade utility does not design for your device.
Please get proper ROM upgrade utility and try again.
Help! It's frustrating the hell out of me!
please add which rom you currently use, do you have activesync installed
Me also have the same error
I have yust tried to install the new release with the same result.
I have a Qtek 9090 with WM 6.1 rel 5.2.20262 b. 19949.1.2.0.black, but in the past month I have tested many other...
Simply the install program don't recognize the device so cannot define if it's right or wrong.
Thank you in general for your fantastic jobs !
Sorry !
Yes I have Activesync installed (for another palmsize divice).
What????
Palm size device???? so you dont have activesync... you have hotsync but....
You already tried the WM6.1.... so you have activesync... men you are getting me crazy jejejej lol
BTW...
Try to conect your device if the activesync dont recognize it and sync.... restart your PC and PPC... the if this not works...
Uninstall the AS then Reinstall it..... if not works...
Try to change to other USB port
If dont works check your advanced conections settings
and check or uncheck the advanced network config box..... if not works...
BTW upgrading needs bootloader so put it on Bootloader mode conect it if your PC says something about not recognized just.... try other PC.... are you on VISTA or XP? suggested... XP.
Thanks
I have used very bad words, so don't panic ! The other device is a "normal" HTC 3300 (artemis) with 6.0 italian std rom and A.S. 4.5.0 (Build 5096) on Win XP.
The 9090 syncs regularly and it is regularly connected (I have stopped the bootloader and reboot the BA), I will test to reboot all, and eventually change the USBport, tomorrow morning (I am a little tired now and the eyes start to cross instead of read). As soon as I have done it I will and report here what does happend.
For now many thanks to you and to Xplode also.
night men!!!
Hope it works for you tomorrow... good luckits our pleasure to help.
Have you tryed the following ?
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
All Ok now
Symply from the last uprade of my 9090 I had changed the PC, so it haven't all the right Drivers.
Now, following Win XP requests (it was needing wceusbsh.sys) all is gone right so my 9090 actually exposes: CE OS 5.2.21169 (Build 21169.5.0.0) release. (and I am starting to play )
Many thanks to all.
you do not need drivers, install activesync in your pc, it includes al the drivers you need - if you have it and winxp still wants driver for the ba remove/uninstall activesync and reinstall it again - remember use the latest version of activesync
Hi,
Remove your "puce" and your sd card.
And try again of course with ActivSync.
For less worry upgrade on you BA's...I...WE recommend XP with Active Sync 4.5
Hi, I have HTC Blue Angel running WM6.5 and find that it struggles to run at this level, i am looking to downgrade to the original wm2003 that it came with, I am on Orange UK
Current Seetings :-
Rom Version : 6.5.23004EN
Rom Date : 06/12/09
Radio Version : 1.15.00
Protocol Version : 1337.45
Extrom version : 23004-xplode
could anyone help and tell me excactly what files i need to download to restore to original shipped state and exactly how to carry out the downgrade.
Regards,
John.
welcome to the forum!
ok, what you need is:
- a pc, preferably with windows xp
- a wm2003 rom in your preferred language, e.g. from -=xplode's shipped rom archive=-
-a RUU (Rom upgrade utility), you can try mine there (attached)
and then you go to the -=wiki wizard for downgrading=- and follow the instructions there or follow these shortened instructions:
1. hard reset your device: power+reset, then camera and record, change the values in the menu from No, No, Yes to YES, YES, NO using the camera and record buttons, confirm with the mail button.
2. put your device in bootloader mode
3. connect it to the pc using the cradle or a usb cable
4. extract the shipped rom in any folder
5. put the maupgradeut_noid in there and start it
6. have a look, whether the 2nd page shows device and rom information, if not, exit, start task manager and kill activesync (wcesmgr and wcescomm) and go back to step 2
7. start the "upgrade"
8. when it's done, perform a wm2003 hard reset by pressing power+reset, and wait for the versions to show up in the bottom right corner, if all the values changed from your previous wm6.5 versions, you're probably fine and done by now.
in very rare cases, something goes wrong, some combinations of pcs and devices wouldn't work with my ruu, but you would realise that at step6 or 7, try and download another ruu then and try again, i think there also is one linked in the wiki.
at the end, your device should read something like:
R:1.12.00
G:1337.42
D:1.06.02
with best regards
Chef_Tony
Decided to go for windows pocket 2005
Thanks Chef_Tony im afraid im running vista and have tried using mtty but with no success, I have now decided to downgrade to pocket 2005, is this possible and how would i do it with windows vista as i am unable to downgrade to XP. Please help if possible.
Thanks John
Bootloader
Hi i dont know if this makes any difference my Bootloader is showing Version 2.05 Reagrds.
no, it does not make any difference, since the bootloader's version is not the problem. before you go on doing anything, you should have a good look at this site:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista_Pic
and unless you are sure, the installation of the driver was successful, you should not attempt to flash the device, because then you will end up with a half-flashed device, that cannot be switched on and maybe also not flashed anymore.
http://firmware.atspace.com/ can't be accessed. is there any other site for wm2003se rom ?
I have the same problem, as i m downgrading to WM 2003, i followed all the instructions as u mentioned here, but when i run "maupgradeut_noid" it always said that this ROM is not for your device, i have Orange SPV M2000 (Blue Angel), please help i cant able to downgrade to WM 2003.
One more thing is there any way to Merge ExtROM with Storage in Windows MObile 6.5?
byudi23 said:
http://firmware.atspace.com/ can't be accessed. is there any other site for wm2003se rom ?
Click to expand...
Click to collapse
http://firmware.atspace.com/Blueangel.html
working flawlessly for me. check now
subratamm said:
http://firmware.atspace.com/Blueangel.html
working flawlessly for me. check now
Click to expand...
Click to collapse
still can't open http://firmware.atspace.com/Blueangel.html too
ok, we are dealing with several different things here:
1. the storage resize:
no, it can only be done in wm2003, no way to do it in wm5 or above, you have to downgrade
2. while attempting to downgrade, don't forget to put your device into bootloader mode, before connecting and starting maupgrade, then there will be no device error anymore.
3. of course for downgrading you need the original rom, at best from xplode's shipped rom archive, if you can't access it, just tell me your favoured language and country, and i will look it up and send you the direct download link. btw. xplode's site works fine!
favoured languange : English
Country : Indonesia
please send me the direct link. thx a lot. chef_tony
since he doesn't have indonesian roms and you are fine with english, here are the links of 2 different UK roms, you should be fine with.
T-Mobile UK WWE 1.42.00 1.42.112 1.13.00 Download (Ziddu) / Mirror 1 (Rapidshare) / Mirror 2 (Megaupload)
O2 UK WWE 1.40.00 1.40.242 1.12.00 Download (Ziddu) / Mirror 1 (Rapidshare) / Mirror 2 (Megaupload).
i hope these links work for you.
thx a lot chef_tony. I almost forgot. I want to ask whether the different rom can drain the battery fastly ? because my battery drain faster using WM6.5.
the power consumption of the device mainly consists of 2 things:
- wireless communications (gsm, gprs, bluetooth, irda, wi-fi)
- hardware usage (cpu & ram)
the wireless does not really vary from rom to rom but much like on the pc, graphically more intense applications use more power and since wm6.5 has a much nicer shell, it uses more ram and cpu to run. that uses more power.
if you want to save battery, reduce the backlight intensity, let the device switch off faster and end all applications that you don't need and de-activate wireless communications that you don't use. still then the battery life is limited but that is something you will have to learn to put up with.
thx chef_tony. I want to ask about the memory used ? is it better with storage 42mb and program 90 mb or repart it into default which is storage 60mb and program 60 mb ? is this RAM configuration also affect the battery consumption ?
no, that has nothing to do with that, because you don't resize the ram, you resize the extrom and the storage. that doesn't have any influence, kind of like the size of the sd card does not have influence.
Chef_Tony said:
welcome to the forum!
ok, what you need is:
- a pc, preferably with windows xp
- a wm2003 rom in your preferred language, e.g. from -=xplode's shipped rom archive=-
-a RUU (Rom upgrade utility), you can try mine there (attached)
and then you go to the -=wiki wizard for downgrading=- and follow the instructions there or follow these shortened instructions:
1. hard reset your device: power+reset, then camera and record, change the values in the menu from No, No, Yes to YES, YES, NO using the camera and record buttons, confirm with the mail button.
2. put your device in bootloader mode
3. connect it to the pc using the cradle or a usb cable
4. extract the shipped rom in any folder
5. put the maupgradeut_noid in there and start it
6. have a look, whether the 2nd page shows device and rom information, if not, exit, start task manager and kill activesync (wcesmgr and wcescomm) and go back to step 2
7. start the "upgrade"
8. when it's done, perform a wm2003 hard reset by pressing power+reset, and wait for the versions to show up in the bottom right corner, if all the values changed from your previous wm6.5 versions, you're probably fine and done by now.
in very rare cases, something goes wrong, some combinations of pcs and devices wouldn't work with my ruu, but you would realise that at step6 or 7, try and download another ruu then and try again, i think there also is one linked in the wiki.
at the end, your device should read something like:
R:1.12.00
G:1337.42
D:1.06.02
with best regards
Chef_Tony
Click to expand...
Click to collapse
THANK YOU VERY MUCH! It was very helpfull!
Showing white screen after hard reset
Dear Tony,
Since I wanted to get more space for my Xda iis tonight, so I install a unlock softwares to unlock the Extrom according to some indication on web, also I format it after scusseful to get a extrom, but I got a freezable white screen after using hard reset, the programe showing rom upgard scussefully but it cannot get into window: Could you teach me how to fix this problem? Can I save my xda IIS?
Thank you so much for your help.
Simon
please do not double post! i answered this exact question in the thread you opened for that.
thanks chef tony!
Dear All,
Anyone in this site can help me to give me the detail procedure how to upgrade my old PDA2k verion 1.40.00 WWE to the latest one version 1.42.00 WWE. Thank you very much.
hi and welcome to the forum.
since that appears to be an official upgrade, if you have a windows xp pc, all you need to do is open active sync, disable usb connections and then start the upgrade, shouldn't be any trouble. after having successfully upgraded, you can re-enable the usb connections to be able to sync again. if you are using windows vista / 7, the easiest way would be, to use another pc or if you are confident enough, you can try and follow the instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=623349
just click how to and follow the manual. but remember, this is absolutely not recommended for beginners and if you fail to upgrade, you will need a windows xp pc to get the device working again. also, in case you decide you want to go a little further than the last official upgrade, have a look at my tutorial thread, linked in my signature. you'll find a lot of interesting stuff there, new roms, tools, apps...
jaybelmes said:
Dear All,
Anyone in this site can help me to give me the detail procedure how to upgrade my old PDA2k verion 1.40.00 WWE to the latest one version 1.42.00 WWE. Thank you very much.
Click to expand...
Click to collapse
Connect the device to the XP computer via ActiveSync, and run the exe that you downloaded (as Chef menitoned, it seems that you are trying to run an official update). Simply follow the on screen instructions. Before starting anything, make sure that your battery has at least 50% battery.
Good luck!