spl ipl 2.26 after unlock ...how do i c if it is unlocked...or make sure it is...what do i do...or do i just have to try it out...
Did you unlock it yourself? If so, how did you do it.
Read this:
http://forum.xda-developers.com/showthread.php?t=285435
Follow the directions step-by-step, DO NOT skip any steps!
If you follow these directions, then you will be sure it's unlocked!
After you unlock it, you can burn any G3 ROM!
yup i used those steps
Great, then your ready to go!
ok thanks...its just it didnt go 2 ipl spl 1.xx it stayed 2.26 the whole way...but i did everything
killacam13 said:
ok thanks...its just it didnt go 2 ipl spl 1.xx it stayed 2.26 the whole way...but i did everything
Click to expand...
Click to collapse
Then it did not unlock!!! Per the directions, you downgrade to 1.xx, unlock, (you may have to rerun 1.xx again to get both IPL and SPL to 1.xx), then upgrade to 2.26, then you can burn any ROM!!!
TRY IT AGAIN!!!!!
after this i was able 2 burn farias...and it didnt work before...but i downgraded to buttons rom twice and still no 1.xx
although i cannot downgrade my rom
Wow, ok, if you can burn ROMs then I guess your ok.. I have read almost everything on unlocking and I can't remember reading anything like that. But OK!!! If it works GREAT!!
Related
Hi All,
I have not been able to unlock my Cingular 8125... to upgrade the thing to WM6.
Yip ran the lockwiz a few times... it did give me some write error though.
...
CopyFileToTFFS(unlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
result=80072746
Your phone is now unlocked...
My phone is a G3. I can use different sims. But I cannot CID unlock? I have used lokiwiz and awizard... what else can I do to CID unlock?
I am currently downloading your rom.I have not tried any roms as I am quite new to this. I have flashed my 8125 to - IPL1.01 SPL 3.08 gsm 01.12.10 os1.5.4.2.
I have also tried several time to downgrade to button... no joy, the spl wont go. I have upgraded to both ipl/spl3.08 and still cannot upgrade the rom.
Thanks,
SanMan
Did you read the sticky with the guide to an easy and safe unlocking by Dr. Puttingham? If you did then you should have read with more attention.
You've messed up your phone's bootloader. It's not supposed to have such different values. If you didn't unlock it before moving to SPL 3.08 you won't be doing it now as it must be 1.xx for lokiwiz and other tools to work.
Go READ threads of others in same situation as you and be sure to have a FULL battery before starting the flashing process.
great thanks for that... so since my spl and ipl are not the same I need to try to downgrade my spl to the same version of button?
Bud I have read and read and read... and now I have only posted. I see that people in my predicament look for a rom called 1.18 from cingular and apparantly that fixes the problem so I can downgrade and re-run my cid unlock. I will read through all of Dr Putting threads where I have also posted to try to resolve this. Thanks for you constructive assistance.
Kind regards,
SanMan
We were all at this point in our lives sometime.
Need rom for downgrade
hi SandfordE,
Could you please send me the link or the file that downgrade the rom to 1.xx. i have tried to looking for so much time but sill can't not. all link is dead.
please, thank you for your help
the blind leading the blind.
well the only one I have been able to get is this one, from Dr putting
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
I cannot find the 1.xx cingular rom which apparantly you need if you dont follow dr p, goodies properly.
Apparantly if you goto http://www.htcwizardweb.net/node/161 and register there is a pathetically slow download link for 1.8x... which should be able to change the ipl and spl to the same thing.
hope this helps you. Please dont run or upgrade anything on ure phone till both the ipl and spl are 1.x that where I made my mistake.
Being a techie I guess thats our problem always wanting to upgrade with out rtfm.
hth
San
Thank SanFordE
Downloading, then downgrade to ipl/spl 1.xx, then cidunlock then uprade to ipl/spl 2.xx then update to wm6.
Am i correct??
thanks again for your help
hi magic
yip thats exactly what I am doing, hopefully it will work, please could you post ure results. Pity bandwidth here in South Africa is so terrible else i would be able to download at home.
Thanks man,
Sanford
hi SanfordE,
why my ipl is 1.xx but the spl still 2.xx after flash sucessfully??
Thanks
Hi,
This worked for me, now i just need to flash the ipl/spl 2.xx then ready for wm6
Thanks
Maybe try to flash with button from dr p sticky... but remember before you can do anything else the like run lokiwiz, the ipl and spl need to be 1.xx
hope this helps.
s
SanfordE said:
Maybe try to flash with button from dr p sticky... but remember before you can do anything else the like run lokiwiz, the ipl and spl need to be 1.xx
hope this helps.
s
Click to expand...
Click to collapse
wow, i'm impressed . You passed from asking for tutoring to giving good tips in no time. well done m8 . All you need now is to manage the successful downgrade.
Are you sure your phone is still locked? Check CID status with mtty.
Thanks for that tip
Got already will try this procedure again tonight... hopefully it works.
hi SanFordE,
now i'm on wm6. thank a lot for your support
Hi MagicEr,
How many times did you have to flash with 1.8.11
I have tried twice already and my spl is still 3.08...
Maybe downgrade to Wizard_Love 2.26? The rey the other way?
Any input is kewl...
no worries S
WM6 is lovely...
All fixed on WM6
Note to all good people, once you have flashed with 1.8.11 <-- this is only on a cingular 8125, even though the spl is 3.08, you can run your lokiwiz to CID unlock and then flash.
Many thanks to all the developers and contributors to this forum.
Sanford
SanfordE said:
All fixed on WM6
Note to all good people, once you have flashed with 1.8.11 <-- this is only on a cingular 8125, even though the spl is 3.08, you can run your lokiwiz to CID unlock and then flash.
Many thanks to all the developers and contributors to this forum.
Sanford
Click to expand...
Click to collapse
hmm not sure if the SPL is really 3.08 although it shows that.
The CID block protection is applied by SPL so if lokiwiz worked it means that the SPL did downgrade
Glad you fixed it though.
cheers
Can someone point me to an English version of this? The only one I can find linked on this site is http://rs25.rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar. This is in another language (Italian maybe) and I keep getting a "300" error. Thanks.
sdl said:
Can someone point me to an English version of this? The only one I can find linked on this site is http://rs25.rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar. This is in another language (Italian maybe) and I keep getting a "300" error. Thanks.
Click to expand...
Click to collapse
Are you sure you have a G4 ?
No, I have a G3. But according to "How to flash a new ROM to your Wizard... a little tutorial!" http://forum.xda-developers.com/showthread.php?t=298613, if I have an IPL/SPL of 2.xx, I need the wizard_love rom. Read last sentence of G.2.
I used the button ROM. It brought my IPL down to 1.01, but my SPL is still 2.25. Is that OK to proceed?
Keep reflashing the button ROM until both your IPL and SPL are 1.xx. It may take a few times. I think I've read where it's taken some people as many as 7 or 8 times to get them both down. Be patient and make sure your battery is good and charged and when you get them both down, then run lokiwiz to unlock your phone.
xeno1 said:
Keep reflashing the button ROM until both your IPL and SPL are 1.xx. It may take a few times. I think I've read where it's taken some people as many as 7 or 8 times to get them both down. Be patient and make sure your battery is good and charged and when you get them both down, then run lokiwiz to unlock your phone.
Click to expand...
Click to collapse
After at least 15 flashes with button, still no luck. I started with Cingular 2.25.
The button I am using is CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.
My IPL is down to 1.01, but my SPL is still 2.25. How in the world do I get passed this?
It really sucks when you can't get past the first step .
P.S. Should the SIM be in the unit during the flash? I've tried it both ways.
Not sure if it matters if the sim in is in it or not, but make sure your SD card is out because that causes problems a lot of times. Here, download and try this, it is an IPL/SPL updater only. It has version 1.05 of both which might be able to bring your SPL down so you can unlock your phone.
xeno1 said:
Not sure if it matters if the sim in is in it or not, but make sure your SD card is out because that causes problems a lot of times. Here, download and try this, it is an IPL/SPL updater only. It has version 1.05 of both which might be able to bring your SPL down so you can unlock your phone.
Click to expand...
Click to collapse
Tried it several times. No luck, SPL still stuck at 2.25, but thanks for the help. Anyone else out there with this problem?
That's weird, usually it happens the other way around and people get their IPL stuck at 1.xx when they try to upgrade back to a 2.xx but the SPL upgrades without a problem. Since you already have the button ROM on there, go ahead and try and see if it will CID unlock for you. Run lokiwiz and see if it gives you any errors and if not, download and install Wizard Service Tools on to your computer and then run it and click the CID actions button to see if it tells you that your CID is unlocked. If it does then your safe to start upgrading. For some reason I have a feeling it might just work for you.
same here, got the cingular 8125 and flashed the rom. I can not get the spl down. I have 2.25 as well. ahhh what other rom should be good for a cid unlock
also i am on activesync as "guest" dont know if this matters
ctheodores said:
also i am on activesync as "guest" dont know if this matters
Click to expand...
Click to collapse
That doesn't matter.
Try flashing Tmobile 2.26 then again the 1.05 Button ROM
From what i know the Wizard Love is only for G4 Users. G3 users should flash Tmobile stoc 2.26
not all g3 are the same!!
i have experienced the same with my g3 (IPL/SPL 2.18) when i tryed to downgrade the spl... ipl 1.05 and spl 2.18 still remain... just try to unlock spl with lokiwiz02b and relax... i tried to install tnt 5.0 23 times before i unlocked the spl... just read and apply this : http://forum.xda-developers.com/showthread.php?t=285435
i downgraded and reupgraded my spl locked g3 (qtek 9100) in 45 minutes at the state of art...
-----------------------------------------------
tnx to all people that try and try and try and teach us with his experience...
I have found that the SPL doesn't matter. Go ahead and run lokiwiz and you will be ok.
yeah i got throught just run lokiwiz02b cid unlock and then update to tmo rom
1-15. Done
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
when i try this I can't get the SPL to go back, IPL is fine, but i've tried 4 sucessive times, no chance..
I then tried this :-
Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me )
that went ok, and then I tried flashing roms, but the only one I can get to work is the Wizzard Love ROM.
I'd love to run WM6 but i can't, if i try the other ROMS they flash ok, but I just go back to the Wizzard ROM when it reloads
any ideas ?
very many thanks, Will
Will_Plaice said:
1-15. Done
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
when i try this I can't get the SPL to go back, IPL is fine, but i've tried 4 sucessive times, no chance..
I then tried this :-
Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me )
that went ok, and then I tried flashing roms, but the only one I can get to work is the Wizzard Love ROM.
I'd love to run WM6 but i can't, if i try the other ROMS they flash ok, but I just go back to the Wizzard ROM when it reloads
any ideas ?
very many thanks, Will
Click to expand...
Click to collapse
"17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM
This will give you a strong 2.26 IPL and SPL to work with."
'Now you SHOULD have a IPL and SPL of 2.26 to work with. If not, you screwed up! Don't attempt to install someone's hard work and ***** before you do these steps!'
EDIT for Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me
Well,
You missed the all important step 17,flashing the T-mobile 2.26,this cud have given you solid IPL/SPL 2.26 to work on,Instead opted for Edit to step 17,flashing 3.08.
Your device is not CID unlocked,download WST tool and check the status of your phone,
secondly you shudn't have upgraded your ipl/spl to 3.08,till you were sure your phone is cid unlock and both the ipl/spl are the same.
anyway download the wst tool to check your phone's status and post the report here,
bugger...
i tried another rom and am stuck in the bootloader...
i have 3.08 for IPL and SPL
I think the WST will not work from the bootloader (and i can't find it to download)
any further sugestions ?
I have tried both the t-mobile and button roms
tia will try not to do any more damage ;-)
Will_Plaice said:
bugger...
i tried another rom and am stuck in the bootloader...
i have 3.08 for IPL and SPL
I think the WST will not work from the bootloader (and i can't find it to download)
any further sugestions ?
I have tried both the t-mobile and button roms
tia will try not to do any more damage ;-)
Click to expand...
Click to collapse
In this particular situation no rom will flash,the only option is to get the IPL/SPL back to 1.xx,only than you can unlock.
If you are in boot loader,try to flash buttons 1.05 again,if worked,ok. otherwise download the latest official rom from the carriers site and flash,it will work and bring back your phone in working status.then flash button's 1.05 to unlock with lokiwiz02b.
Are you having any sdcard in your phone,remove it,it'll help,sometimes sdcard freezes the boot loader,by removing it,boot loader mode is released,good luck
many thanks, i came across a IPL SPL 2.26 only ROM and this I managed to get to flash, and with your advise I now have WM6
thanks, Will
Will_Plaice said:
many thanks, i came across a IPL SPL 2.26 only ROM and this I managed to get to flash, and with your advise I now have WM6
thanks, Will
Click to expand...
Click to collapse
THANKS
Glade it's up and running
ipl spl 3.08; RUU at 100%, but Wizard stays at the same rom. Why ?
Thanks.
moteur said:
ipl spl 3.08; RUU at 100%, but Wizard stays at the same rom. Why ?
Thanks.
Click to expand...
Click to collapse
The reason is dear that you did not CID unlocked your phone and upgraded to ipl/spl 3.08.You didn't follow the guide correctly.
Rules of the forum are to read,read and read fully to understand and only than go for the upgrade,lol
Anyway if it's a G3,which I'm sure it is,otherwise if it happen to be a G4,man you had it,it wud had been an expensive piece of paper weight on your desk, and loading the same previous,read the guide and try to downgrade to ipl/spl 1.xx,than correctly follow the unlocking guide,ok
good luck
Please read and follow the [Definitive guide] clicking here.
You don't have to be CID unlocked to flash the 3.08 IPL/SPL. If you're not though I would suggest holding off on it until you do because of the serious problems people have been encountering when trying to go back down to a 1.xx IPL/SPL. It could cause you to never be able to CID unlock.
YES!
Of course,it's not necessary to CID unlock for upgrade to 3.08,cuz it's just an upgrade to latest Bootloaders,IPL/SPL 3.08 and keep using the current official Carrier's Rom and pray that your carrier might someday provides with a wm6 oggicial upgrade...But if you are looking to upgrade to a newer wm6 custom build Rom,well,it's recommended and wise to unlock first and than upgrade to ipl/spl 3.08,cuz unlocking is only possible in ipl/spl 1.xx and after upgrade to 3.08,BAh!!,and downgrading to 1.xx for unlocking...... it's where things start getting rotten and it becomes a pain in the neck.
moteur
So, I must say you missed the bus of an easy option to unlock,I still don't say that it can't be done,it's very much possible,only now it wud take some efforts to get down to 1.xx,anyway,when there's a will,there's a way,lol,or take xeno1's advise and stick to what it's worth for,good luck
hi, i am downgrading my wizard for days now. i followed the guided by dr puttingham. but my SPL won't downgrade. i used the button ROM & even the wizard_love ROM for several times now. my IPL is now 1.01 but my SPL is still 3.08. my wizard is a G3
anyone pls help
thank you for your Assistance
Flash 2 Times in a Row the button Rom 1.05 and you'll get both ipl and spl 1.05.
Anyway (Since It is understood you are in the process Cid unlocking) if your IPL is 1.05 try the LokiWiz.
I Cid Unlocked having IPL 1.05 Spl 2.25.
Aldo
I thought it was
Flash 1.05; CID/SIM unlock; Flash 1.05; CID/SIM unlock again.
It's been so long
thanks for your reply. but i did both the cid unlocking using lokiwiz and tried lashing the ROM twice and it still doesn't work
there must be something you missed in the directions.
Youa have to run the lockwiz aplication twice also. one for sim one for cid. usualy when I have that type of problem it is starring me in the face and i cant see it. I recomend stepping away from it for a bit.
downgrade and unlock ipl/spl 2.16
hi,
got a g3 wizard from imate - imate k-jam. have been reading up on the various posts on flashing g3 devices.
on one of the posts thru wiki:http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
i saw this "With your device connected to your computer as Guest, run the file that your downloaded. It's pretty much self-explanatory. Agree to everything, and let it do it's thing. It is downgrading your IPL to 1.05. You can only unlock your phone if the IPL is 1.xx, you can't do it if your IPL is 2.xx."
my worry is that my ipl is 2.xx
can i proceed with this? is there anyone who has successfully been able to do those steps on a device with 2.xx ?
Please advice.
Try This
I was having the same problem using button 1.05.Try using this rom The Xda_MiniS_LaunchROM_v154102.exe. Find it in the tutorial and download.Then follow the instructions.