cant install rom update code 260 - P3600 Software Upgrading

hi im trying to update my rom with the new one that just came out that will enable my gps on my p3600 but i cant seem to be able to
i have folowed the instructions but when i get to the updating part that you have to wait 10 minutes my activesync turns off completly and gives me error code 260 check your connections, reset your computer, reset device and try again
i have done that many and plenty of times and it does the same over and over again i thought it was my activesync so i downloaded the 4.5 version but it still does the same any help please
can i update my rom with the one from htc some other way?
or im just out of luck?

After sendind this error don´t connet phone via cable.
Exit updating pragram.
Start update again and it´s all right.

Related

Someone help me please

I tried to update my rom and it was working, until my laptop turned off. (I forgot to plug in the power cord). So I tried it again, and it was stuck in bootloader and so I tried to update it using a Official Cingular Rom. But it gives me an error 260 saying cannot connect. I then tried to use mtty (one of the guides on here) but there's no USB option. I tried this on 3 different computers. Any suggestions please?!
To access mtty with USB option, you need to kill the wcescomm process (or disable USB connection in ActiveSync).
Thanks for the reply but I did kill it and disable usb connections. Stll no USB shows up. Im using a pretty new laptop with XP
Are you sure your Wizard is in bootloader mode when you start mtty?
It's always in bootloader mode when it's on since the Rom Update Failed ( computer turned off).
I really don't know why I have this problem. It was working before, but then it failed, and now it wont connect
Try to flash it on another computer.
I suspect there are problems on the USB ports (And/Or software issues) of your computer...
In my first post I said I tried to flash it on 3 different computers ( I meant laptops.) I dont know why it wont work now though. It worked yesterday
If it helps before it gives me the 260 error it says my USB device is not recognizable.
Please, does anyone have anything?
Im getting realy worried and my warrantys expired
help me stuck on bootloader
what do i do when i downloaded mtty? im am stuck on the bootloader screen due to a 98percent error but right now i cant do anything but stay on the bootloader.
I downgraded so im back to
IPL 1.01
and SPL 2.25.
HELP me get out this screen please? I've tried almost everything i could search on this forum. thanks in advance. and thanks for the hard work on the great roms you guys have!
Is there any other way to revive my device? I've been trying for the past 2 days and it's still not working
TheTop- Flash a official rom to it
I have tried official Roms like the one from the htc website, should I just keep trying even if I get error 260?
dunno if it helps, but make sure that you're battery is charged at least 50%. It seems to be one of the requirements that are needed when you normally flash with the RUU after activesync hookup. I know that when I tried flashing below 50%, the program wouldn't work for me and boot out.
if it's below 50%, look for a friend to charge it and try again.

Attempted WM5 Rom upgrade and got stuck!!!

Hey Guys i would need some help here i downloaded the Helmi upgrade rom but didnt seem to work. i get the device connection error before it even starts
i downloaded the official rom that i found on this forum on this link
ftp://ftp.clubimate.com/PDA2k_WWE_14000_176_11200.exe
as u can c this is the one from the Imate website when i attempted to install it. it actually didnt give me a connection error and started to install but when the PDA rebooted i got that connection error back and now i am stuck at the bootloader screen with SERIAL written at the top and V. 2.06 at the bottom tried to soft and hard reset but nothing seems to happen i even disconnected the battery for 30 minutes but couldnt get it to boot
Anybody pleeeeeease heeeeeeeeeeelp!!!!!!!!!!
Thanx
Please give us more information.
What windows are you running? XP or Vista?
Do you have an error number?
I run windows Vista and the error number i get is 101 Connection error when i attempt to run BaUpgradeUT
on the PDA the only screen i fet is the bootloader screen with SERIAL and V.2.06
Ok, the problem in flashing our precious BA under vista is that you need to replace the usb driver with an old version so the updater will work correctly.
Search the forums for vista update or vista flash and you will get the answer and the driver you need.
thanks a lot i ll try it right now been waiting for this
OK i just searched for vista flash and found this post
http://forum.xda-developers.com/showthread.php?t=313001&highlight=vista+flash
tried it it worked done upgrading and now i have WM5 on my PDA2k
thanx alot u really saved my day
i am looking for imaginet arabizer for it now to fully enjoy the experience
And one more thing i have to thank Duanes who posted up the vista upgrading manual linked above Thank you

HELP:Error 270 when upgrading!!!

I have tried all stickied CID unlocker/Hark-SPL over the last 10 hours today and all ended up with:
Error [270] : Update Error
The image file is corrupted. Please check your Update Utility. (PDA Phone Rom Update Utility 3.1.3.2)
Bootloader info:
TRIN100
IPL-1.00
Trin100
SPL-3.03.0000
I got AUS Versions of HTC - WM6 3.00.707.18
Somebody please help me!!!
Thanks a lot!
During my research on the forum:
1. tried disabling the USB > PC on HTC
2. also tried disabling the USB connection in Activesync
3. tried it via normal activesync connection method running RUU
4. also tried bootloader method running RUU
No matter what I do, I just keep on getting this stupid error 270!!!! Also had some error 260 on the way, saw lotsa post regarding that and got it fix! BUT just this error 270! I don't know what to do now!
HELPPPPPP!!!
jackkkkk said:
During my research on the forum:
1. tried disabling the USB > PC on HTC
2. also tried disabling the USB connection in Activesync
3. tried it via normal activesync connection method running RUU
4. also tried bootloader method running RUU
No matter what I do, I just keep on getting this stupid error 270!!!! Also had some error 260 on the way, saw lotsa post regarding that and got it fix! BUT just this error 270! I don't know what to do now!
HELPPPPPP!!!
Click to expand...
Click to collapse
Ran into that error myself but with s1rl4ncel0t's help managed to do it.
Try not putting your device in bootloader but launch the updater with your device set up normally, connected to/through ActiveSync. This was my mistake, I had the same error but tried updating with the device already in bootloader.
Try this
http://forum.xda-developers.com/showthread.php?t=296722
I have the same problem
it's run fine for me...

Error 101: Connection Error

Hello.
Im new here, first of all sorry for my english, and second thanks for this forum.
I have problems with upgrading my Siemens SX66 WM6.0 pro to a WM6.1
The ROM upgrade software tells me there is an Error 101: Connection Error
exactly like this
bilbo--baggins
Every time I try to do the rom upgrade for my PDA2K the device does a soft reset (when it's reset it then reconnects to activsync, and the green logo reappears) and after a while the ROM upgrade software tells me there is an Error 101 Connection Error. It's driving me nuts, I've tried all sorts of variants, soft reset first, hard reset first, USB port, USB2 port, Activesync 3.7.1, activesync 3.8, Windows XP, Windows 98. I don't understand why there is a connection error, because I can connect to activesync correctly, it even reconnects after the ROM upgrade causes it to do a soft reset. Please help! I've even tried following directions to copy the temporary files and running those directly but the result is the same.
Click to expand...
Click to collapse
can anyone help to solve this problem.
i have no problem with active syn connection, its synchronized with out any problem. my OS is winXP sp2.
This is a well known issue, I am sure its addressed in the Wikki on this site. The solution is don't reset your device when the on screen instructions ask you to do so, just continue with the upgrade.
Enjoy your new device once you have upgraded.
ok
i run upgrade program, the i like in instruction i put sx66 in to the cradle, active sync starting to synchronize well. then i push the next button in the upgrade program, the active sync is turning off and after couple minutes there is a message 'bout Error 101
p.s. the upgrade file i download from this thread http://forum.xda-developers.com/showthread.php?t=372485

[Q] HardSPL Problem!!!

Hi everyone,
i've got a problem... i have tried to flash hardspl (bootloader) on my x1 but it doesnt work.
i have tried it like i read in the forum in different threads but i cant enter bootloader and when i start hardspl on my pc and take step by step as the program says... after the progression bar came - my phone display goes black and the front panel starts to shine and after a time i get a connection error on the hardspl program...
can anybody pls help me????
did you take out your micro sd card out of your phone?
That was my problem...........
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
hard spl
hi
i had some problems !
here is the best info
try every thing and search and read what i understud was that some phones have different ways to get in to the right hardspl mode i all most gave up and then it workt
DONT GIVE UP I WAS ON IT FOR 2 WEEKS
THE WORST THING IS I DONT REMEMBER WHAT I DID SORRY !
HASSE
tilsid said:
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
Click to expand...
Click to collapse
Several time ago i got that error too, but i never give up. Try another hardspl for xperia, when u click it, it will auto generate to extract some file, just click romupdate utility and follow the same procedure.
If still got some error, try install it from a fresh computer with usb 2.0 installe and active synch.
You just got that error becouse there is some miss connection with another usb device.
UPDATE: it worked
So I did a hard reset on the phone (settings-> clear storage) and then tried again. Worked like a charm. Installing ROM right now!
Thanks everyone!
Moved to X1 Q&A as not Rom Dev
it still not work...
i have tried all you write me...
no it says first "no file found" and trys to update over usb and than it says again connection error...
what shall i do?

Categories

Resources