Database Develop

AKU2.3 PDA Mobiz Edition

For all who's interrested I've here the Mobiz Edition with some extra features.
ftp://xda:[email protected]/Up...22410101_TMobile_WWE_PDAMobizEdition_v120.exe
for more details, look at:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=60589&PN=1

yea, a translation may be fine

I think the screens tell enough.
I will tell more later after I tested it.

In short, this one has:
*realplayer installed
*Contacts Backup
*GSFinder+
*Image Maker
*Mx Calculator
*Note M (MP3 Voice recorder)
*Opera Browser
*TRE Registry Editor
*a Stopwatch
* Media Player (not windows)
*vx Utility
*Xn View
*OMAP overclock
*SMS Backup
*Pocket RAR
also the GPS reg is already changed
+ some other helpfull shortcuts like:
Reset
SMS Sender
Recent Dial
etc.
regards

damn which ver to run! aku 2.3 mr clean.. 2.24 t-mob or now this ver! arg decisions decisions!

I had/have all 3 variants on my Wizard and like this one best.....
............Up until now.

but in reality i could just install these apps myself right?

jacob-mda said:
but in reality i could just install these apps myself right?
Click to expand...
Click to collapse
Yes, you can always install apps manually.

then poo no need in wipeing my settings out i dont really think i need these apps neways but if i did where could i dl them or is there a way to extract them out of the .exe?

After installing this ROM, I can no longer flash to other ROMs. During the ROM flash wizard, and after the phone does the initla reboot to the multicolor screen, the update fails and the installer immediately goes to recovery mode.
Has anyhone else seen this, and is there a fix?

mskovrinskie said:
After installing this ROM, I can no longer flash to other ROMs. During the ROM flash wizard, and after the phone does the initla reboot to the multicolor screen, the update fails and the installer immediately goes to recovery mode.
Has anyhone else seen this, and is there a fix?
Click to expand...
Click to collapse
I would try downgrading to the stock T-Mobile 1.08 ROM and then you should be able to upgrade to whatever ROM you want. If you can't even downgrade I'm not sure what you can do.

mskovrinskie, I've tried to Update my ROM, I managed without problems so I guess it's your phone or software causing the problems.
I used the original Qtek 2.17 update.

I personally think this ROM rocks. Ran the Cingular Connection cab from the shipped ROM and not much else. SmartsKey and Omap were already installed along with the other neat things Vilem referenced.
Seems very fast and stable but then again all I run is MS Voice and Adobe Reader as even the newest ClearView is too lacking for my needs. And most cool is that the big button dialer skins seem to work without the wierd graphics, etc I experienced with previous versions.
Just my two cents ...
Steven
chow

Link working
Everytime I click on the link I get the cannot find server page.... any ideas?

Vilem said:
For all who's interrested I've here the Mobiz Edition with some extra features.
ftp://xda:[email protected]/Up...22410101_TMobile_WWE_PDAMobizEdition_v120.exe
for more details, look at:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=60589&PN=1
Click to expand...
Click to collapse
will this work with the 8125 and still let me use that SIM card for my calls? if so, what is the advantage to this over the others? thank you very much.

Yes it will work with a 8125.
Up untill now I still like this update the best.

Philly, try copy link location, then delete the file so you go directly to the directory.

Vilem said:
Philly, try copy link location, then delete the file so you go directly to the directory.
Click to expand...
Click to collapse
If you mean ftp://xda-developers.com/Uploads/Wizard/Roms/ there are
2 directories and 1 file
TMobile directory
Xelencin directory
2.17 radio only file
TMobile directory doesn't contain file.
Please adise.

ftp://xda:[email protected]/Wi...22410101_TMobile_WWE_PDAMobizEdition_v120.exe
They moved the file, it's now here.

Thanks

faria-3.2-beta-4 [close beta testing-at the moment...]

you will require a password to access the rom[only by email].depending of the feedback in the next few days,the roms will be made public.
all tester that applied will receive an email with the instrucions.
and i dont need to remind you that your device need to be cid unlocked to avoid problems.
download 12mb paging pool from here
download 8mb paging poll from here [coming shortly]
Change log for beta-4
Button issue fixed
Htc calendar fixed
Smart flash –app to play swf files
Updated total commander
Updated task manager
Updates battery status
Updated core player
New startup image
Removed 2 problematic apps
PDF icon fixed
Some adjustments under the hood
Flash7 bug fixed
New performance tweaks
More operators cabs- [see the end o the document[
Bluetooth stereo is in this beta and working by default, so no need for extras cabs. Just pair your device.
i can also confirm that this ro works with dual sims cards
operators setting in the rom for;
USA
[USA_Cingular ]
[USA_T-Mobile_VPN]
[USA_T-Mobile_WAP]
UK
[UK_O2_Contract]
[UK_O2_PAYG]
[UK_Orange_Contract]
[UK_O2_Contract]
[UK_Virgin]
[UK_T-Mobile]
[UK_Jersey_Telecom]
[UK_cable&wireless]
FRANCE
[france-SFR]
[france-Bouygtel]
[france-OrangeWorld]
Portugal
[Portugal_Optimus]
[Portugal_TMN]
[Portugal_Vodafone]
NEDERLANDS
[Nederland_KPN]
[Nederland_Orange]
[Nederland_Telfort]
[Nederland_T-Mobile]
[Nederland_Vodafone]
NORWAY
[Norway_Netcom]
[Norway_Tele2]
[Norway_Telenor]
NEW ZEALAND
[NZ_TelstraClear]
[NZ_Vodafone]
SOUTHAFRICA
[SouthAfrica_MTNSouthAfrica_MTN
[SouthAfrica_CellC]
[SouthAfrica_Vodacom_WAP2.0]
.................................................................................................
troubleshot;
If you uninstall or delete the auto run file please delete [PPCInstaller.lnk]
In the startup folder
.................................................................................................
cabs below are only for cingular networks
rename the files extencions to .cab

Thanks Jose! I'll be loading this later on my Wizard

Is this safe for g4 owners ?

Perfect Timing!
Hi Faria,
Perfect timing to release this new beta rom just for the weekend. I'll be playing around with this ROM the coming weekend.
If you have some time, can you explain why the installation of this ROM has some manual actions like executing am autorun.exe from the My Documents folder.
I'll keep you informed about my results with this ROM.
Kind regards,
Nico Dekker
The Netherlands

Great work. I'll download this rom today and test it.
I'll keep you informed about my results with this ROM and my bluetooth stereo

Just installed the new release. Very cool startup screens. Installation went flawlessly (install rom, run autorun.exe, run operator config). Paired my Plantronics 590 Stereo Headset and I'm now listening to music in strereo! Thanks for resolving this!
Post more as I try it out.
Thanks!!

nicodekker said:
Hi Faria,
Perfect timing to release this new beta rom just for the weekend. I'll be playing around with this ROM the coming weekend.
If you have some time, can you explain why the installation of this ROM has some manual actions like executing am autorun.exe from the My Documents folder.
I'll keep you informed about my results with this ROM.
Kind regards,
Nico Dekker
The Netherlands
Click to expand...
Click to collapse
sure,
due to this rom has the security desabled by default ,for some weird reason this autorun file does not work with comands from the extended rom.
but im trying to get rid of the auto run for good.
i does work if the rom has security enabled ,but then when it finishes installation it turns the rom security on by itself!!!!
i have allredy send this bug to the develpors of the autorun file.they are investigating.
plus i moved the autorun file from the extended rom because some testers could not run it in the last beta.

G3 device
Faria,
can I put this ROM to a G3 device ( IPL 2.26 SP 2.26, Molski 30 Mb ROM )
Thanks

cptcafne said:
Is this safe for g4 owners ?
Click to expand...
Click to collapse
it is safe since the rom has no bootloader integrated.but i dont know if u are able to install.since people with g4 have trouble installing 3.2. roms.
most liklely because is cid locked.
u can unlock cid in a g4 at imeicheck uk or something like that.
nevertheless a would keep an original rom from your carrier for recovery purposes or make an sd backup.

patek said:
Faria,
can I put this ROM to a G3 device ( IPL 2.26 SP 2.26, Molski 30 Mb ROM )
Thanks
Click to expand...
Click to collapse
yes .u will have no trouble.

Working more with the ROM....
The operator config doesn't seem to be working for me. I did do the autorun.exe first and then ran it. At the end, it rebooted. I soft-reset and re-ran the operator file (USA_Cingular), and still don't see the definitions in the settings as I did with the last ROM release.
Ideas?

saeba said:
Working more with the ROM....
The operator config doesn't seem to be working for me. I did do the autorun.exe first and then ran it. At the end, it rebooted. I soft-reset and re-ran the operator file (USA_Cingular), and still don't see the definitions in the settings as I did with the last ROM release.
Ideas?
Click to expand...
Click to collapse
the last rom had 2 files for you carier.this one has one that i found in the xda.maybe thats the problem.if you want i can send you the last rom files.

Another item....
Registry Wizard doesn't seem to run: "Am unexpected error has occurred in Registry Wizard.exe." Related to the operator config?
Thanks!

Can't wait to test it!
After all the positive feedback I read from the initial testers, can't wait to test it myself.
Anyway Faria, thank you very much for investing the time and energy in these kind of initiatives!
Best regards,
Brian.

faria said:
the last rom had 2 files for you carier.this one has one that i found in the xda.maybe thats the problem.if you want i can send you the last rom files.
Click to expand...
Click to collapse
Are you referring to the tweaks.cab file you sent? I still have that. If not, yes, please send the files.
Thanks!

saeba said:
Another item....
Registry Wizard doesn't seem to run: "Am unexpected error has occurred in Registry Wizard.exe." Related to the operator config?
Thanks!
Click to expand...
Click to collapse
read the documents that i have email- you, and you will find out why is not working in your device.
the cab files for your operator are in the first post.

Hi,
Can I install in this rom the Ringo software. In the last one it made wizard crash, only with one hard-reset I solved that problem.
Thanks and great work

Just installed the version
So far so good. Works well. Installation took less than 10 minutes, and only got stuck at 99% for about 2 minutes.
One small thing that looks like a bug is when I try to close the task manager, it won't let me and then I have another task manager in the icons in the bottom of the screen. Is this a real problem or am I using it in the wrong way?

Download, and flash went along perfect. Followed directions exactly. After Extended Rom was installed, and device reset, got the error message "Cannot execute calnot.exe" Then installed my operator settings (US-Cingular) which evidently didnt work correctly - no big deal. After that soft reset, got the error message "cannot execute repllog.exe" I have since soft reset again, with no errors. Off the start, the only thing I see that I dont like is the new clock in the top right. It is cutting the year digit off. Is there a way to just revert back to the standard time? I have alos noticed the task manager quirk as described in the above post.

bradsnw said:
Download, and flash went along perfect. Followed directions exactly. After Extended Rom was installed, and device reset, got the error message "Cannot execute calnot.exe" Then installed my operator settings (US-Cingular) which evidently didnt work correctly - no big deal. After that soft reset, got the error message "cannot execute repllog.exe" I have since soft reset again, with no errors. Off the start, the only thing I see that I dont like is the new clock in the top left. I have alos noticed the task manager quirk as described in the above post.
Click to expand...
Click to collapse
the task manager has been descussed in beta 3 that is the way it works.to exit taskmanager go to options/exit,
to remove the clok or date use registry wizard.

wm6 row application unlock

hey guys,
just flashed my unlocked cingular treo 750 with the new wm6 row and was wondering if there was a way to perform an application unlock...
I have a few apps that are unsigned and it won't let me run them... it's extremely annoying..
any help would be greatly appreciated!

http://mobile.surrealnetworks.com/AppUnlockReg.htm

paypalbid said:
http://mobile.surrealnetworks.com/AppUnlockReg.htm
Click to expand...
Click to collapse
thanks paypalbid but it didn't work... Did you get it to work on your treo?

just checking.....you downloaded the one for PPC instead of Smartphone right ?
What applications are you trying to run that required the phone to be app unlocked ?
Since i upgraded to WM6 i have not had problems with app unlock
If all fail why dont you just edit the registry your self by:
HKLM>Security>Policies>Policies
value = 0000101B DWORD = 1

paypalbid said:
just checking.....you downloaded the one for PPC instead of Smartphone right ?
What applications are you trying to run that required the phone to be app unlocked ?
Since i upgraded to WM6 i have not had problems with app unlock
If all fail why dont you just edit the registry your self by:
HKLM>Security>Policies>Policies
value = 0000101B DWORD = 1
Click to expand...
Click to collapse
well for now I'm just doing a few tests with some app I developed and it just won't let me run it because it's unsigned..
I installed the cab file that automatically adds that key, restarted the phone and then I made sure it was there, and it is..
any ideas why it's not working?

try this:
HKLM\Security\Policies\Policies001001 has a value of 1, NOT 2

sahmedkh said:
try this:
HKLM\Security\Policies\Policies001001 has a value of 1, NOT 2
Click to expand...
Click to collapse
tried that and tried changing the value of 00001005 from 16 to 40 as suggested on another site but it still didn't work...
this is really annoying... can you guys give me a list of unsigned apps that I can try just to be sure it's not my own app that isn't working?

Download Wm5 Storage which is the last application on the list, it requires app unlock
http://mobile.surrealnetworks.com/MDAapps.htm

paypalbid said:
Download Wm5 Storage which is the last application on the list, it requires app unlock
http://mobile.surrealnetworks.com/MDAapps.htm
Click to expand...
Click to collapse
well I'm not sure if it worked or not... it installed but I don't see any new apps

unsigned apps
The Hermes Tweaker 1.1 has a check box that allows you to run unsigned apps. You might need that if I'm understanding what you wrote.

Hi,
I loaded up Jack_V3 ROM today and he pointed to your page to download the Manill HD cab to update the icons he used.
I notice above a similar message to the problem I am having below but I am installing the full package.
i am having a probelm with changing the Icons used back to the stock ones. I downloaded Touch-IT blackstone manilla but I get an error reporting:
the program or setting cannot be installed because it does not have sufficient system permissions.
I have searched for hours and also tried Multiple Registry changes and HTweakC, SurrealNetworksAppUnlock etc.
Anyone, please shed some light as I have a call logged with my provider to get the phone unlocked. Is that the issue. PLEEEEEEEAAAAAAAASE.

hispeed_mike said:
Hi,
I loaded up Jack_V3 ROM today and he pointed to your page to download the Manill HD cab to update the icons he used.
I notice above a similar message to the problem I am having below but I am installing the full package.
i am having a probelm with changing the Icons used back to the stock ones. I downloaded Touch-IT blackstone manilla but I get an error reporting:
the program or setting cannot be installed because it does not have sufficient system permissions.
I have searched for hours and also tried Multiple Registry changes and HTweakC, SurrealNetworksAppUnlock etc.
Anyone, please shed some light as I have a call logged with my provider to get the phone unlocked. Is that the issue. PLEEEEEEEAAAAAAAASE.
Click to expand...
Click to collapse
OK. Trying to go easy on this phone and not treat it too much like a windows box. Seem the more I refrain the more posts I have.
Seems that the other ROM had manilla.exe running. Killed that with the phone service and some others and the cab installed fine.
Hope that helps someone else. Hats off to the Developer.
Does anyone have a cab installer to change the clock to black on white? instead of the white on black.
Thanks guys

Win2003 problem

Hi all.
Has anyone found using their original ROM that sometimes you go to phone out and there is no audio? I find the fault is typified by when you dial, you hear no dialing tactile tones from the key entry. Then the phone rings out but I hear nothing. A reboot fixes it.
Any comments?
Thanks,
Alistair.

Maybe found the fix posted here:
http://forum.xda-developers.com/showthread.php?p=779152#120448
I've applied the CAB hope it sorts it thanks.

Have you tried switching to WM5 or 6?
I never had that problem as i changed my ROM when I first got my BA.
try this link
http://forum.xda-developers.com/showthread.php?t=403421
I know that it is shameless self promotion but what they hey???

David389 said:
Have you tried switching to WM5 or 6?
I never had that problem as i changed my ROM when I first got my BA.
try this link
http://forum.xda-developers.com/showthread.php?t=403421
I know that it is shameless self promotion but what they hey???
Click to expand...
Click to collapse
Well the problem seems to have gone after the previous cab install.
Re WM5/6 yes, I am quite keen but the FAQ for upgrade is unfortunately not so clear for me. For example:
The wizard takes one through the process with one ROM, no problems but other information:
http://wiki.xda-developers.com/inde...0.ROMx20.thatx20.willx20.workx20.forx20.mex3f.
Advises that I need to find out system information and search for my ROM before upgrading. So its confusing do you do the wizard and forget trying to find the correct ROM or search for your ROM - in my case I did, and its not there although my device is AU/NZ/Vodafone, so will be a very common GSM model.
Cheers,
Alistair.

Questions about changing ROM

The first time is always the hardest.
Recently I've been playing with the registry to try and lower the 'lowest volume' setting for my headset with no success. Apparently I need to change the audiopara file. I'm thinking that changing the ROM may help. So here's a few questions:
1 - If I decide to go back I can download my original ROM from here (Generic Australia R3AA013 Software Update)?
2 - Do you reckon Christians 6.5 ROM is pretty good? Do you recommend changing ROM?
3 - Does each ROM come with it's own registry etc or do they rely on stuff on the phone (does flashing the ROM remove everything?).
Thanks!
.... sorry can't post links. Feel free to recommend a good 6.5 ROM.

'Tron said:
The first time is always the hardest.
Recently I've been playing with the registry to try and lower the 'lowest volume' setting for my headset with no success. Apparently I need to change the audiopara file. I'm thinking that changing the ROM may help. So here's a few questions:
1 - If I decide to go back I can download my original ROM from here (Generic Australia R3AA013 Software Update)?
2 - Do you reckon Christians 6.5 ROM is pretty good? Do you recommend changing ROM?
3 - Does each ROM come with it's own registry etc or do they rely on stuff on the phone (does flashing the ROM remove everything?).
Thanks!
.... sorry can't post links. Feel free to recommend a good 6.5 ROM.
Click to expand...
Click to collapse
1 yes
2 best find out for yourself; the earlier the better
3 yes and no; no, the rom is replaced and most probably rilphone.dll, but radio and spl are normally untouched
cheers

Hey guys. I just got my x1 back from repairs (they fixed the nasty crack for free XD) and wanted to know if I can Hardspl again. When I put the stockspl, the page said that dont bother using this if you are gonna put hardspl back. But I had to for warranty reasons.
Anyway...can i just flash hardspl again?
Thanks in advance
T

redlite said:
Anyway...can i just flash hardspl again?
Thanks in advance
T
Click to expand...
Click to collapse
I did that 2/3 time without problem.

DrakenKorin said:
1 yes
2 best find out for yourself; the earlier the better
3 yes and no; no, the rom is replaced and most probably rilphone.dll, but radio and spl are normally untouched
cheers
Click to expand...
Click to collapse
1 - Sweet.
2 - Changing the ROM takes a bit of effort just wanna be sure it's a good move.
3 - Okay - what is the radio and spl?
Cheers.

That Energy ROM looks pretty sweet. May go for that one.

Another Question;
The 'NEW ORIGINAL X1 and X2 ROMS update 3.2.2010' thread lists all the original ROMS (in my case Generic Australia R3AA013 Software Update).
forum.xda-developers.com/showthread.php?t=475482
So could I restore my X1 to it's original ROM by downloading from the Link above?
Why would you choose to take the time to back-up your ROM if you can just download the original?

'Tron said:
The 'NEW ORIGINAL X1 and X2 ROMS update 3.2.2010' thread lists all the original ROMS (in my case Generic Australia R3AA013 Software Update).
forum.xda-developers.com/showthread.php?t=475482
So could I restore my X1 to it's original ROM by downloading from the Link above?
Why would you choose to take the time to back-up your ROM if you can just download the original?
Click to expand...
Click to collapse
1. Yes.
2. Some people flash their phones 2-3 times a day, so it's good to have something to fall back onto where everything is setup the way you want to. That being said, I don't back up my ROM, I just do a clean install every time I reflash.

harveydent said:
1. Yes.
2. Some people flash their phones 2-3 times a day, so it's good to have something to fall back onto where everything is setup the way you want to. That being said, I don't back up my ROM, I just do a clean install every time I reflash.
Click to expand...
Click to collapse
Cool, thx.
When you do a hard-reset, which I've done recently, that take your phone back to square one. So I guess what I'm trying to work out is if it's necessary to back-up the ROM. Basically I'm being lazy.
I've downloaded two ROMs to try - Christian's ROM and Firestone V6.1.

HELP:!!! my x1i phone not running
lastly , i 've installed a language supporting program , then i restart the x1i but it did not boot again , it just reach to sonyericsson logo and still there .... i've tried hard_spl and all of these stuffs one by one. but when it connect to the device -as i remember the third step- it shows the the current verion: -it does not show any thing here- and the next version , 1.00.x or something like this.
when i clicked the next button i show the progress bar on each of tow (pc and x1i) and then stay on 0% for about 3 min then it show the recovery wizard , some time it said that "lost connection" others nothing but recovery... x1i here still showing the progress bar as 0% , so i remove the battery or soft reset to go into the recovery wizard , then i shows successfull recovery ... but i don't see any respond on the x1i , it's the same status , no boot no ability to update or or ...
when i connect the x1 and go to boot loader(manually known buttons) the Win XP (mine on pc SP2) show new device and good install driver and successfull driver installion on the first time and then just shows the sound of plug in the device or plug out...;
sorry if i said too much here . just i want to make it shown to all.
thanks for all who will mention even "i 'll try to ask for you"
good to be here

'Tron said:
Cool, thx.
When you do a hard-reset, which I've done recently, that take your phone back to square one. So I guess what I'm trying to work out is if it's necessary to back-up the ROM. Basically I'm being lazy.
I've downloaded two ROMs to try - Christian's ROM and Firestone V6.1.
Click to expand...
Click to collapse
I would advice on backing up your personal things: contacts, mail, messages, some settings if you want (like hw keybd layout...)
to back-up a rom is only useful if you change reg settings often and want to have a backup in case of system crash/failure
as you intend to change your rom once in a while a backup of one specific rom doesn't make sense you see? preserve your personal data, that does it
pim, sprite, spb, synch, myphone, ... there are many ways, read about them and decide for yourself
@truthglow did you try with your sd card taken out?

DrakenKorin said:
I would advice on backing up your personal things: contacts, mail, messages, some settings if you want (like hw keybd layout...)
to back-up a rom is only useful if you change reg settings often and want to have a backup in case of system crash/failure
as you intend to change your rom once in a while a backup of one specific rom doesn't make sense you see? preserve your personal data, that does it
pim, sprite, spb, synch, myphone, ... there are many ways, read about them and decide for yourself
@truthglow did you try with your sd card taken out?
Click to expand...
Click to collapse
I've my person data sorted. All my contacts are stored in Windows Live - so all I need is the Windows Live app to retrieve my contacts.
I use online sync for my calendars - so no problem there. Don't care if I lose my SMS messages.
I've copied across any pictures.
I store all the .cabs for my favourite apps on my SD card.
I made some changes to the registry to try and adjust the headset volume but to no success.
So probably don't need to pack up my Rom.
I like the look of Spike's X1.5 ROM.

'Tron said:
I've my person data sorted. All my contacts are stored in Windows Live - so all I need is the Windows Live app to retrieve my contacts.
I use online sync for my calendars - so no problem there. Don't care if I lose my SMS messages.
I've copied across any pictures.
I store all the .cabs for my favourite apps on my SD card.
I made some changes to the registry to try and adjust the headset volume but to no success.
So probably don't need to pack up my Rom.
I like the look of Spike's X1.5 ROM.
Click to expand...
Click to collapse
sounds reasonable so far
you can use apps to automatize (to a degree) the restoring of personal settings/apps/progs/data/...
e.g. with user customization (UC) or sashimi
that's especially useful when often flashing an update of the already installed rom, as menu structure and general reg layout is similar (expect for certain update)
that way you can easily get most of your customization done without major effort (except of course for the one time you need to config your uc tool), right after flashing, some roms even check for uc configuration during rom customization process
about the reg edit: did the adjustment not work or the export of the changed setting?

yes i did it
DrakenKorin said:
I would advice on backing up your personal things: contacts, mail, messages, some settings if you want (like hw keybd layout...)
to back-up a rom is only useful if you change reg settings often and want to have a backup in case of system crash/failure
as you intend to change your rom once in a while a backup of one specific rom doesn't make sense you see? preserve your personal data, that does it
pim, sprite, spb, synch, myphone, ... there are many ways, read about them and decide for yourself
@truthglow did you try with your sd card taken out?
Click to expand...
Click to collapse
many thanks for you DarkenKorin...
when i use the micro sd way it stays on "loading ... " and don't gives any thing else...this thing with many roms and many pcs-but on xp- .
yesterday i got window7 and tried to connect my x1 , and the same thing become... but my pc was with no mtty ... and the microsoft active sync was not able to install on Seven...
so today i've got the mtty and i'll try after install it.
if it worked i will notify you surly.
thanks again...
and if anyone knows how to solve i thank him.

DrakenKorin said:
about the reg edit: did the adjustment not work or the export of the changed setting?
Click to expand...
Click to collapse
^ I edited the registry in an attempt to decrease the headset minimum volume (I found the minimum volume too loud for in call & listening to the radio).
I have since learnt that I need to change the audiopara file. But I don't have the expertise. So I'm hoping my new 6.5 ROM's headset volume is a little quieter .