Related
Hi guys, I hope you can really help me out.
I have an O2 XDA IIs which I just tried to upgrade. Now during the install it comes up saying "ERROR 114" saying that there was an error installing the upgrade.
Now my problem is the phone just sits there with Serial 2.07 on the screen .... i've tried running the upgrade program again (the screen where it says what rom you have, and what you are upgrading to, it's blank in the current rom) but I still get the same error every single time.
I'm trying to upgrade to;
CE Image version 1.40.00
Extended Image Version 1.40.923
Radio Version 1.12.00
Can someone please give me some ideas as to what I can do to get this working again?
Many thanks
Damien
sounds like the country id error, have you tried the MaUpgradeUt_noID file???
this usually fixes this. 8)
First of all, I install T-mobile clean 2.26, I recall the internet working and with activesync, cause I got sbsh weather updated. Dunno why now it does work on my gf phone. Then I bought a phone and install the T-mobile 2.26 and realize it didnt' work and mokiz version too, then I try Mr. Clean 2.24a, and still doesn't work.....any help would be great.
My home connection with PC.
Microsoft activesync 4.2 on telus DSL line. Try all these rom,
My 8125 CID lunlock ...not sure..I tried to unlock it but dont' know if I got it
IPL -1.08 SPL 2.25 ...try all these rom....Mr. Clean 2.24a, Mosik 2.26, Sumitter 2.24, T-Mobile 2.26.
My gf 8125 CID lock
IPL 2.x SPL 2.x too, try all the rom on hers too, same prob.
But I swear her phone could update the weather before cause i'm looking at it wiht only two days with weather but now I can't do it.??
I thought it was my computer setting cause one time my comp frozen and had to reboot and it was around the same time. So instead I tried on my brother labtop which he just formated so everything should be alright.
But I was still unable to connect to internet with Activesync or bluetoothl.
Please help ......big Cooks.
There's a checkbox in AS that lets you forward the connection... tried that?
I'm running the molski 2.26 rom and had a mr clean rom before, as well as some factory TMO/I-Mate/Qtek roms. Never had any problem connecting with AS.
Appreciate the help and reply.
Hi, tomasz
Thanxs for pointing that out, in AS, I went to connecting setting and found what you were saying, the section my computer is in automatic setting, but I also tried my computer is connected to internet. Still I get this error in IE when loading a webpage, "The page you are looking for cannot be found due to unkonwn error 0x80072f78".
I wouldn't be so annoy if I didn't have internet in the beginning, but when I first got my 8125. Everything works fine with Mr. Clean and T-Mobile rom, without touching any setting in my comp and the phone, AS works like a charm, internet thur AS work fine without any manual setting.?? I didn't know things can change so much all a sudden? I hope someone out there know exactly what the problem is? thanxs again for the post tomasz, hope you have another solution or someone out there does....
Q9100 half dead!!!
Hi pals..
Listen gotta a big problem with my Qtek 9100.This is it. I've tried to update the pda to spanish so I could sell it to a friend of mine.I've downloaded the 1.3.7.5 version from xda-dev.Everything was working fine but in the middle of the process the power in my house failed.So the process stoped now I got the damn OS in Spanish but it doesnt work because it didnt installed properly.I've tried out everything I new about this pda.That is try to install in bootload mode,the only thing I've managed was update the IPL and SPL (that I dont know what doest that means) for that I've used an Orange ROM,if it would have updated properly it would show up the W2k5 customised by Orange but no,it keeps stuck in the same Qtek welcome star up image.
What and I supposed to do? I heard that I could install it loading it direct from the SD Card but I have to do it by copying an Backup SD card already done once mine OS is damaged. I've already tried the one in Dutch on the XDA ftp web page.But it seems not to be working.
Regards
Luiz Santos
Finally got my internet working thur AS
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
Hi guys,
I am guessing my problem is the fact that there is something wrong with the devices radio, more the radio rom.
I a while back flashed my dad's KJAM, and it all worked fine, he however has not used the actual phone part of the device since then, and now that he needs it, its not working.
The phone is not in flight mode, and it doesnt ask for a pin, as thats how he set it before I flashed it.
The phone keeps searching for service, and when I try to manually set the network, it keeps comming up with some or other problem.
The phone worked before I flashed it, so I am guessing it is the Radio ROM.
I am thinking of ugrading him to WM6, is this recommended at all? Which thread is best to follow for upgrading him to WM6?
His current details are:
ROM Version: 2.16.9.1 WWE
ROM Date: 2/6/06
Radio Version: 02.07.10
ProtocolVersion 413.1.03
ExtROM: 2.16.9.101
Any help will be appreciated.
P.S. I did just try to the radio rom that is on the xda ftp, for the wizard, I downloaded and tried to load the REAL_Radio_2.61.11 ROM, but that does not want to load for some or other reason, it first complained about the radio update util and said I must update or something, the second time I tried it was a communication error. I am using my JASJAR's USB cable, is this a problem at all?
Try to change the radio rom to 2.19 or higher but i recommend you to flash first the 2.19 if that fails then try more higher.. i guess 2.2x and 2.6x something like that... i forgot..
Ok, u got a link for me for those ROMS?
wait a sec..
If you search and read all the stickies thread you might encounter this one your self..
http://forum.xda-developers.com/showthread.php?t=268031
There at that thread have a varius radio roms to download..
goodluck!..
post the result afterward
Thanks...I didnt see that one...I will have a look...shot for the help...
Ok, ive tried a few different things.
I tried to get it to connect with activesync, but it just doesnt want to work, I have also attempted a hard reset, and activesync doesnt work either.
Before I did a hard reset activesync 'did something', and a message came up saying it couldnt get an IP address from the server, and on the PC activesync came up with some other thing saying it cannot connect to the Windows Mobile Powered Device.
After the hard reset, I try activesync again, and now absolutally nothing happens on the phone. On the PC the little network icon comes up aqquiring an IP address and dissappears, and the just sits there...
At this point I ran a exe file on the K-JAM, to put it into bootloader mode, I ran the update tool, and again it complained about the update utility, again not changing anything, I ran it, and then it gave a communication / connection error, and a third time also a communication / connection error.
I tried only one radio rom, I am going to try it with the oldest version on that page, if that doesn't work, then I don't know. I tried it with ActiveSync 4.5 and 4.2.
In the mean time I tried the original ROM file from clubimate, that actually loaded, and worked, except the network still isnt working.
I also tried syncing the phone on another pc, and funny enough that worked.
On trying to load the new Radio ROM, it started the update process, and at that moment the phone jumps to bootloader mode, obviously the activesync connection gets lost, the update tool waits a bit, and then suddenly complains about the update tool, saying I need a new version or something.
I have checked the bootloader version of the phone, and it is version 2.x.
I try it again and then I get a connection error....I really need to get my dads phone working again.
Any ideas?
Not sure which Radio's you are trying but go grab a Radio Only ROM. TMobile 2.19.11 UK seems to be a very good and stable one. These are found in the ftp area: ftp://xda:[email protected]/Wizard .
Hope that helps.
Thanks for the help.....ive tried 3 different ones from there, they all do the same thing...so its a bit wierd.....
On the other side of the coin I decided to stick on another sim card, and it works just fine on the other sim card
So the radio is working just fine afterall.....just got back from the service provider and they rekon either the sim card is damaged or its a network error....so lets see what happens.....
Thanks to everybody for the help...
lol..
so its just the simcard after all..
lol yeah....
Although I would still like to know why I can't update the radio anyway...
isnt it because of your activesync?
I don't know what it is...
I used it on another PC alltogether and activesync worked just fine...the update tool interacts with the device, starts the update process, and then the phone goes to bootloader mode, activesync obviously losing the connection, the update tool waits a while and then suddenly says something about the update utility being old or something, I need a new one or what ever....
Then while in bootloader mode I try the update again and then I get a connection error.
Its all wierd.....
Hi Guys, I have bricked my Cingular branded BA Siemens SX66 PH20B. I am getting the no GSM error, I have read the WIKI and read the thread that follows Help, my device shows "No GSM" after upgrading, and I can not perform any more ROM upgrades Link. I have tried the steps and nothing seems to be working, I guess I must be a complete noob but i have spent hours trying to get the radio to install and nothing will work. I have spent 6 or 7 hours looking on here before i requested help I was running the radio unlock when a tree took out the power line to my house. I edited the ruu.conf and that didnt help I ran the MaUpgradeUt_noID.exe and it will update my rom with no problems at all it just hangs at the radio install and wont go anywhere i get a "Error 114: Radio update error" If someone can help I would appreciate it.
Might help.
I'm not quite sure about your problem but I did get the same radio update error couple times. One thing that I had to do is to let my computer (active sync) recognize my device first. After that the redio update error is gone.
I got it fixed, what i did was install an original rom from seimens that i got at SX66 (Blue Angel) Standardization Project, itfixed the radio error and then i could reinstall the updates
Hi guys,
I have a weird problem.
As of recently two days ago, my tilt won't take any flashes anymore. I believe with was caused by an action of mine which I tried flashing android from SD to NAND.
Here are the symptoms:
1) After a failed attempt at loading the Android Kernel, I installed the stock HTC ROM (Kaiser_HTC_ASIA_HK_WWE_3.34.721.2)
2) The stock rom flash worked, but any subsequent flash do not work
3) When trying to flash (either from Active Sync or SD Card) it gets stuck at 0%
Current state is as follows:
1) Phone boots up normally with stock rom
2) I can get into Bootloader mode no problem
3) When trying to flash it doesn't work
I have tried several steps in order to recover.
1) Tried to flash Stock rom again (Faillure)
2) Tried to flash HardSPL again (Faillure)
3) Tried MTTY 1.42 (Don't know if Success or Faillure) - I have attached the screenshot below
I have been successful in flashing multiple custom ROMs before, but idiot me wanted to try the android and now I messed my phone up. I guess it's true what they say: "If it ain't broke, don't fix it!"
Anyways...
So it seems to me, the connection is getting done but nothing wants to be pushed.
Here are my credentials:
PC:
XP Service Pack 2
Phone:
ROM Version: 3.34.721.2WWE
ROM Date: 09/30/08
Radio Version: 1.70.19.09
Protocol Version: 25.83.40.02H
HardSPL 3.34
So my question is, do you guys know how to get my Kaiser working again?
Do you recommend in attempting Android on Kaiser again or leave it be?
Any help is greatly appreciated in clarifying this out.
Dave.
Sorry for some reason I cannot post link to images. Does anyone know how to do this as well?
tsiftis21 said:
Sorry for some reason I cannot post link to images. Does anyone know how to do this as well?
Click to expand...
Click to collapse
You can just dont put http or wrap it in code and it's due to limitation on accounts to prohibit spam untill you reach a ceratain ammount of posts.
Screenshots
Thank you for the tip!
Code:
[IMG]http://a.imageshack.us/img806/7494/clipboard01ytn.jpg[/IMG]
[IMG]http://a.imageshack.us/img412/3866/clipboard02ml.jpg[/IMG]
[IMG]http://a.imageshack.us/img192/6405/clipboard03bx.jpg[/IMG]
[IMG]http://a.imageshack.us/img809/4079/clipboard04r.jpg[/IMG]
[IMG]http://a.imageshack.us/img835/3858/clipboard05nr.jpg[/IMG]
tsiftis21 said:
Thank you for the tip!
Code:
[IMG]http://a.imageshack.us/img806/7494/clipboard01ytn.jpg[/IMG]
[IMG]http://a.imageshack.us/img412/3866/clipboard02ml.jpg[/IMG]
[IMG]http://a.imageshack.us/img192/6405/clipboard03bx.jpg[/IMG]
[IMG]http://a.imageshack.us/img809/4079/clipboard04r.jpg[/IMG]
[IMG]http://a.imageshack.us/img835/3858/clipboard05nr.jpg[/IMG]
Click to expand...
Click to collapse
remember to take out your sim and sd card while flashing.
Mr. Clown said:
remember to take out your sim and sd card while flashing.
Click to expand...
Click to collapse
I had tried without the sd card, but I had forgotten to take out the sim card.
I tried without the SIM card and the same result is present. Won't go past 0%.
Any other ideas?
Does any one have any ideas how I can get my tilt up and running again? Any help would be greatly appreciated.
Thank you
I get the same issue...
Word for word, the same as this.
Operator 24.328.1.610
ROM Version 3.28.61.0 WWE
Date 05/02/08
Radio 1.55.16.25
Protocol 25.83.40.02
I've tried several PCs, ActiveSync doesn't work at all, Windows Mobile Device does.
SPL 3-27 is on the phone but I've tried running the others without success. I get up to 17% on any ROM if using JumpSPL1.93-KAIS.exe but that's about it.
This is a work phone which is on the Orange UK network (corporate contract), it's playing silly beggars (not ringing when someone phones, but helpfully telling me I've had a missed call).
According to Orange the only thing they'll do is swap it like for like... but I'm 99% certain the problem is down to the ANCIENT firmware on the phone and Orange have confirmed they've got no plans to update it.
tstaddon said:
Word for word, the same as this.
Operator 24.328.1.610
ROM Version 3.28.61.0 WWE
Date 05/02/08
Radio 1.55.16.25
Protocol 25.83.40.02
I've tried several PCs, ActiveSync doesn't work at all, Windows Mobile Device does.
SPL 3-27 is on the phone but I've tried running the others without success. I get up to 17% on any ROM if using JumpSPL1.93-KAIS.exe but that's about it.
This is a work phone which is on the Orange UK network (corporate contract), it's playing silly beggars (not ringing when someone phones, but helpfully telling me I've had a missed call).
According to Orange the only thing they'll do is swap it like for like... but I'm 99% certain the problem is down to the ANCIENT firmware on the phone and Orange have confirmed they've got no plans to update it.
Click to expand...
Click to collapse
I had this on my tp.
My usb was dying out, i ended up switching my tp with the one of my brother cuz my brother got a galaxy S.
Try if active sync works properly and keeps connected for 15 mins or more.
My connection kept getting lost untill eventually no pc would be able to reconize my phone.