Hello everyone,
I'm using T-Mobile MDA Vairo(both phone and rom)but with O2 network.Everytime I dail a phone,I see the ugly T-Mobile logo...(wish no Tmob guy here :wink: )
anyone could show me a way to remove this logo :?:
Please use the Search option:
http://forum.xda-developers.com/viewtopic.php?t=40593
maybe you want to get rid of sall the T-Mobile (pink!) customisations as well; do a rom upgrade (ie to a QTek rom).
That one is not operator related and just shows you the name of the active operator in your dial pad.
I bought a Cingular 8125 from eBay and recieved it today. I unlocked it with loki and it works on my T-Mobile SIM and my AT&T SIM. I was talking with a member of the forums here and he told me to purchase unlimited MMode for $25 a month and I can get EDGE data from AT&T. I purchased it and went through steps to use "My Work Network" but when I use IE it says "Connecting to Cingular GPRS" and doesn't connect. Any idea how to fix?
Also, I see AKU 2 is available and I was also recommended to flash my ROM because I don't need the Cingular bloat (I'm not even using the Cingular network!) but I have no idea what to use.
I wanted to try the AKU 2 but I don't have 50 MB free on my phone so I'm going to buy a memory card tomorrow... is that what I should use?
Also, regarding Outlook and ActiveSync... can I set contacts in Outlook 2003 to be Personal and Business and then have my phone only sync with the personal contacts? How?
Thanks!
this is the post that was left by a user in a topic i started. Maybe its because you didnt do the radio rom ?
i'm posting this from an unlocked 8125 on a cingular blue (old AT&T) plan and I absolutely love it. I see no slowdown where i'm at compared to the cingular SIM chips. on dslreports.com/mspeed I average between 125 and 155 kbs.
if you still can hurry and add unlimited mmode for $25 a month before they completely freeze the at&t accounts so that any change/add would warrant a migration.
once you do, get your 8125, carrier unlock it, cid unlock it, flash with button's cooked rom, flash with radio rom 1.13, customize your extended rom to the way you want (no need to use the cingular extended rom, its just bloatware because your on at&t's settings.
to get edge working just set your connections to connect to "my work network" on both settings, then go into my work network and add a connection "cellular (GPRS)",name it at&t edge (or whatever you want. now the important part is that you have to set the apn as "proxy" without the quotes. then set this connection connects to the internet under the proxy setting.
leave username and password blank and domain blank. that should do it, then connect to internet explorer and you should be surfing on edge. good luck.
I paid full retail also, $490 after tax, and it was worth every penny. I could have got it for $250 if I migrated and used my FAN buisness account, but my blue plan is sooo much better. good luck.
Check out this link if you're still having problems setting your 8125 to work with the at&t network. It's not exactly for the 8125 and WM5, but its very similar. I believe this is for the blue angle and WM2003.
http://supportcingular.atgnow.com/c...gnow.com%2Fcng%2Fknowledgebase%2FKB39865.html
if you still have questions after looking at the link let me know and I'll try to help.
Oh and no, you don't have to update the radio rom, the radio rom update will probably help with reception and edge speeds, but won't have an effect on connecting to the network.
Kenny- I've got my 8125 working on Cing Blue. If you need the settings PM me and I'll copy them out to you. It was a pain but I got it working in the end.
Marc
Thanks for the replies guys.
KINetics: I read the guide and realized I needed to edit the Cingular GPRS connection, and I did as it said... and got a little bit further. My 8125 says connecting to AT&T GPRS, says "locating..." and then returns the error: "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later." Any ideas? I have 4 bars when this happens, and the E icon (I'm guessing it's EDGE) is showing at the top.
Also, I want to have the phone as upgraded as possible... and I want the internet to work, which is why I'm thinking about updating the rom. Can you tell me what I'm best doing and how to go about doing it? I'm getting a 1 GB mini SD card today.
Thanks again!
SUCCESS!
I got the internet working!
I went to connection settings and to the proxy tab and unchecked use a proxy for internet.
Thanks for all your help! I just need ROM advice now.
danrw84: Have being trying for 3 weeks to connect and no one could help. Followed your instructions and it worked. Thanks a bunch.
And all these problems because I had an old ATT account ...
I have a PDA unlimited option for $14.94/month Company deal hehe. Now I can use it !!!
GREAT!
Thanks for the info...got it working at 144kbps! the ATT/Cingular support ppl immediately went for the: "Need to migrate your account" line. Ha!
help with cingular 8125 but with the at&t network
Please, please..
can someone please help me... I tried reading the instructions but I am not too savy... with this stuff... plus ... i am a girl...
can you tell me how and where .. do i change the settings... for my cingular 8125... I am getting the run around with tech support.. and i dont want to migrate...
any help will be appreciated.... :lol:
Lorena in miami....
[email protected]
the settings and photos on how to setup the connections are on cingulars web page under support for the 8125
https://onlinecare.cingular.com/dev...ingular.atgnow.com/cng/tutorials/KB56475.html
the settings and photos on how to setup the connections are on cingulars web page under support for the 8125
https://onlinecare.cingular.com/dev...ingular.atgnow.com/cng/tutorials/KB56475.html
Will this work even if I am still under the AT&T network????
Lorena :?:
I have been pulling my hair out trying to figure out what the heck is going on my my MDA's and hope someone here can help.
A few weeks ago my MDA (8 months old) started to only connect to Cingular's cellular system and would actually make a phone call 1 out of 5 attempts. When trying to dial a number it would drop all signal and then go into a searching loop for a few minutes before connecting back to Cingular. This was with the 2.26 custom ROM from this forum.
I called tech support from Tmobile and they sent me a replacement. This unit came with 1.08 and worked for maybe two days before starting the same problem. I then tried the custom 2.26 ROM and the official 2.26 from Tmobile with no luck. Last week I went to a Tmobile store and explained my situation and the store manager gave me a brand new MDA (G3). Everything worked great until I decided to flash to the Tmobiles 2.26 ROM yesterday and all hell broke loose. My the MDA connects to Cingular again and can go hours just searching for signal.
My wife has a MDA with the custom 2.26 ROM and does not have any issues. I can switch SIM's and the problem stays with the MDA. The only thing is I can not go into the phone settings and manaully connect to Tmobile. When it works (doesn't tell me it can find a network and to disconnect the data connection even though there isn't one) I see two Cingulars in the network selection box.
Has anyone else experienced this problem or is something getting screwed up when I CID unlock the phone?
No one has experienced this problem? I have a third MDA on its way but interested in finding out the actual problem.
Network
Have you looked at the selection?
Settings/Connections/Connections/Advanced/Select Networks
Is T-Mobile there? Is Cingular ahead of it? If not, does it have the problem in other areas? It may be connecting to Cingular because it is stronger.
One other thought, try the 2.47 radio rom. My MDA (which doesn't have your difficulty) has worked much better. It won't overwrite your files to flash it.
I have had the same MDA for about 6 months, unlocked twice, with the older 1.8, and the newer 2.26 T-Mobile ROM's.
That's just odd, it must be some problem with the unlocking.
Hello,
I use the MDA with a Simyo Card.
After I switch the MDA the device try to send sms for 3 or 4 times.
I got only the Information SMS could not send.
Can anybody help me ?
Is your MDA sim locked?
I can you simyo at MDA but I don´t now if it was unlocked.
Can I See wether MDA was Simlocked???
Hi all-I have been given a Orange branded spv m2000 which has got WM6 on it.
Now Ive popped my sim card in it and it has 4 new text messages-which appear on the home screen.
However when I touch the 4 text messages and it takes me to the inbox it shows no messages there.
Does anyone have any suggestions with regards to this issue?
On the loading screen it states:
R 1.06.02
G 1337.38
D 5.60.00 WWE
Any help is greatly appreciated.
Jon
Anyone have any ideas?It appears this phone would be good to go if this function worked ok
Can you try a different SIM card? Basically those SMS are saved on your sim card. To make sure of this, you can do a soft reset on the BA.
It was a brand new sim-I can try another and see what happens
unlocked phone ?
orange sim in orange phone ?
pre / post pay ?
sim lock?
messages [mms / sms / email] ?
sync'd ?
#===#
-d.b-
#===#
orange sim in orange phone ? Yes-its branded as a orange SPV M2000
pre / post pay ? Using a pre pay sim card (Brand new-have tried another new one also)
sim lock? Locked to orange
messages [mms / sms / email] ? when you go into the mailbox there is no mms section,just sms(Showing no messages in it) and email.
But with the original sim I recieved the messages on or another new sim it still shows on the home screen 5 new messages,but has never shown them in the inbox....other than that it seems to be working fine,but as I deal with a lot of people via text it is a major issue for me.
sync'd ? I assume so...please forgive my ignorance here!
Thanks for the replies.
Jon
ok lets see...
it happens too with my bro's blue angel...
and the wrong with him was his OS it has that issue
so you need a fix for it
or try a new ROM
just read the wiki how to upgrade the BlueAngel