Hiya,
I just got my cable from expansys, the vga and s-video out is working fine, but i haven't got any thing usb to work yet. I've tried flash Drives and a card reader, just no response, no light or any thing... is there a trick to it or is it not very compatable or is there a chance mine is faulty?
cheers
My guess is that although it is a Host, it does not supply any power, I say this because the battery is only 3.7 V DC and USB devices are 5 V DC, this means that there is not enough Volts in the advantage to power a USB device to start with, never mind powering a USB device and an Advantage at the same time.
You will probably need to plug it into a USB hub that supplies it's own power, like this one
http://cgi.ebay.co.uk/USB-2-0-4-Por...106823769QQcategoryZ96866QQrdZ1QQcmdZViewItem
I had the same problem but it was because the TV out was still on. Once I turned this off in the settings menu it worked fine.
I too had no trouble hooking up a flash drive. No other peripherals were attached to the cable. Alas, no go on a hard-drive MP3 player, but trying a powered hub is a good idea.
Have you tried connecting your USB device, and then soft resetting?
Works for me.
I have no detection of USB devices by my Advantage.
I tried with and withour Soft Reset before and after the cable connection, before and after the cable and flash drive connection, with or without the VGA or Video Output disabled or enabled, but my Advantage does not recognize any USB device (I tried with 2 flash drive, a keyborad and an optical mouse. Nothing to do. These devices do not work with my Advantage).
It seems that the relative drivers are missing.
Someone has a sure fix or solution to this problem ??
Thanks
Battery Powered USB Hub...
This device should work well with the x7500/Advantage. It doesn't require you to carry around a bulky power plug. It runs off of 4 AAA batteries and provides power for up to 4 USB devices. Since the x7500/Advantage has limited power and can't power external drives itself, this is a nice addition and cheap. Hope someone finds it useful.
http://www.radioshack.com/sm-cyberpower-4-port-battery-powered-hub--pi-2259675.html
I have the Dopod U1000. I have connected a thumb drive and a USB mouse without issue. The mouse is useless as far as I can tell as there is no pointer though the buttons work.
I have no problems with a T-Mobile Ameo and a 1Gb Corsair USB Flashdrive - don't even need a soft reset. It's listed as 'Hard Disk' on the Ameo.
Question though: can I just unplug it when done? I'm used to 'safely removing hardware' on the PC, and it just feels wrong unplugging it from the Ameo, but I can't see any similar 'safely remove' method.
Hi.
It depends of the usb device. My 1GB pen drive is recognized but my 4GB isnt recognized (my 160 GB isnt). So I suppose If the usb device isnt powered then only "very low powered" devices are recognized...
If I connect my 160 GB and I plug it to AC then It is recognized correctly...
Does mini usb-usb host cable exist? Where to buy it?
THX!
Look this one http://www.pixmania-pro.it/it/it/255677/art/cowon-iaudio/cavo-usb-host.html#
seems to be what I'm looking for...don't you?
spmc said:
I have the Dopod U1000. I have connected a thumb drive and a USB mouse without issue. The mouse is useless as far as I can tell as there is no pointer though the buttons work.
Click to expand...
Click to collapse
Search the forum for the Modaco Mouse driver. It has a mouse pointer and works flawlessly with a USB Mouse!
4 in 1 Cable
I found te following description of this cable:
http://www.expansys.com/htc/p_htc_item.aspx?i=145166
The HTC SC V100 4-in-1 cable can split the HTC proprietary 16-pin interface on the Advantage into these 4 functions:
- USB 1.1 host (supports USB low power): Plug USB accessories into the USB standard A female port. The host can support these accessories:
1. Thumbdrive
2. Card reader
3. USB keyboard
4. USB mouse
- VGA output: Connect the Advantage to output the screen contents to a projector or PC monitor
- TV output – S-video: Connect the Advantage to output the screen contents to a TV through the S-video interface
- TV output – Composite Video: Connect the Advantage to output the screen contents to a TV through the composite video interface (AV cable)
Technical Details:
Resolution: 640 x 480 pixels, 262K colours
Cable length: 100mm ± 10mm
Connectors support:
- HTC specific 16-pin male for connecting to the Advantage
- USB standard A (Female)
- VGA D-sub (Female)
- S-video (4-pin) out (Female)
- Composite video out (Female)
4
Hi,
I have the HTC 4 in 1 cable for the T-Mobile Ameo (HTC Advantage 7500) and the ability to access a USB thumbdrive or stick appears to depend on the device.
The following devices worked without a hitch:
- Kingston DataTraveler 1GB
- Q motion 1 GB
- SanDisk MobileMate SD+ (This a SD card reader in a USB stick format, very handy to copy data from a SD/miniSD/microSD card to your 7500 without going through Activesync)
Another noname USB stick that I had did not work.
So the trick is to find a low powered USB stick.
Cheers,
Tim
Please can someone give me some exaples about how could I use
Video/S-Video/ option in 4 in 1 cable, considering that I can image how to properly use VGA out and USB host?
THX so much!
Hi,
before I buy it, could it work?
USB 2.0 (compatible 1.x)
Adapter USB from Type A (female) to mini USB 5pin (male)
THX so much!
asci said:
Hi,
before I buy it, could it work?
USB 2.0 (compatible 1.x)
Adapter USB from Type A (female) to mini USB 5pin (male)
THX so much!
Click to expand...
Click to collapse
Yes, that should work for you. I'm sure it's not more than $5.00 USD. ;-)
asci said:
Hi,
before I buy it, could it work?
USB 2.0 (compatible 1.x)
Adapter USB from Type A (female) to mini USB 5pin (male)
THX so much!
Click to expand...
Click to collapse
Are you hoping to connect USB accessories to your Athena with this?
If so, it will not work.
Only the 4 in 1 Host cable connected to the ext USB socket will do that.
This adaptor will only connect to the Sync & Charge socket, and will not provide USB Host capabilities.
Pantaloonie said:
Are you hoping to connect USB accessories to your Athena with this?
If so, it will not work.
Only the 4 in 1 Host cable connected to the ext USB socket will do that.
This adaptor will only connect to the Sync & Charge socket, and will not provide USB Host capabilities.
Click to expand...
Click to collapse
So it will not provide me host function...?
Than the HTC cable should have something like a "chip" in it to provide host, is it right?
Yes, the USB Host chip must be either in the addon cable, or linked to the extUSB socket in the Athena. But definitely not the sync & charge socket.
hey, anyone knows if the kaiser's usb is host or only client? and if it is client, any way to make it host??
Isaygarcia said:
hey, anyone knows if the kaiser's usb is host or only client? and if it is client, any way to make it host??
Click to expand...
Click to collapse
testing with otg adapter and flash drive...
change the title to kaiser otg host or something
hum?
tyeo098 said:
testing with otg adapter and flash drive...
change the title to kaiser otg host or something
Click to expand...
Click to collapse
any results for it??
OTG adapter fits, but the jump drive doesnt light up, indicating its not being powered, no recognition. but I am sure that there is an OTG chip on the device though. otherwise they would have a standard mini-a usb port.
where can i find an OTG adaptr??
Mine came with a set of usb adapters, for 20$ I can hook anything TO anything!!!
Although google is your best bet.
I also read that the chipset used in this PDA should have support for OTG USB, and that OTG is controlled by 1 pin on the USB connector, and that HTC might
have left it unconnected..
would be possible to connect it and have OTG functionalities?
Otherwise does it exist something like bluetooth hubs which transform usb devices into bluetooth?
Hi,
Has anyone ever connected a USB printer to the Athena USB Host port?
Do you know if the X7501 running WM6 has a low-level USB driver that automatically map the USB port to LPT1? I have a USB printer that I would like to connect to the Athena for printing, but I am wondering how to access it.
Thanks in advance! John
Note: sorry if already posted on the WM6 forum but not sure to which one it belongs
As far as I know, Windows mobile has only to USB drivers, mass storage and HID. I don't think a USB printer would work here.
Usb port is it locked or there is possibility to use it like usb host ?
To manage copy pictures of a camera to phone without pc by usb adaptator.
Samsung talked about usb 2 hdmi cable and think if its real it use some usb video card supported by phone(because of physic material imcompatibily of hdmi nd usb)
May there is a way to dev a tool or hack to get it works...
Aah!! Finally somebody like minded!!
I had been scouring forums for something like this. USB OTG would be an excellent add on to this phone. If not OTG, at least host would be an excellent idea.
No idea whether the existing USB Host driver for Nexus one would work on this one.
The processor on SGS already supports USB Host (not sure about OTG though). This has been pointed out in their press release - w w w .samsung.com/global/business/semiconductor/newsView.do?news_id=1043
I am just wondering - should we request Samsung themselves via mass petition to open up this feature on SGS?
some USB devices might be compatible, like the 100/1000 Mbps USB to RJ45 plugs
those same ones works in Windows Mobile it should work as well for Android, however a driver will be required.
mouse and keyboard support should work out of the box
external USB keys for storage, or even USB mass storage devices should work out of the box as well.
usb audio... hmm... not sure what else at the moment
Hi AllGamer
Thanks for the reply. So how exactly do we get this going on SGS?
I am much more interested in having USB HDD support on SGS (hopefully without an ext power source - am I asking for too much? ).
Are you suggesting that the N1 fix should work here also? Can somebody help us with a "How To" to enable this on SGS?
Cheers!!
Coooolboyz
you can plug in any USB mass storage devices (USB hard drives) and it should work.
However, you might not get enough power from the usb port, you'll still need need power cord for your external usb hard drive.
I know on my HTC windows phones works like that, it should be the same for Android.
I'll try that when i get a chance.
you just a need a USB female to a mini USB male cable
yep!! you are right about power!!! I am trying to get a cable - hopefully in couple of weeks should have this.
but I am wondering if all this would work without proper drivers in it. Would SGS have USB HDD drivers in it already?
coooolboyz said:
yep!! you are right about power!!! I am trying to get a cable - hopefully in couple of weeks should have this.
but I am wondering if all this would work without proper drivers in it. Would SGS have USB HDD drivers in it already?
Click to expand...
Click to collapse
I can see one problem, You will only be able to use Fat32 drives unless someone compiles NTFS / HFS+ into the kernel. Ext3/4 is already done so I don't see many problems. What I recommend you do is get some sort of adaptor for Female USB > Micro USB and test it out with a flash stick or you can hack one .
Yeah - I understand the difficulties of having NTFS support outside the MS world.
I didnt know that ext3/4 were already a part of the kernel!! Is this by default available in all Android kernels?
For USB Host cable - I am guessing that this one can be used - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250671106072 (same as what Sven used for N1 USB Host capabilities).
But I seriously doubt plug and play would work (that would be too much of an expectation! )
Does any body have that cable here, who can check out if SGS does actually work in USB Host/OTG mode?
Sven has try with a Galaxy another Host Driver
h t t p : / / sven.killig.de/android/Galaxy/
Hm what can we do with these files?
However, any news about this?
Maybe, we could ask some Galaxy S kernel developers about this.
So why our phone does not support the newer usbs? If I plug in one it just doesnt do anything? And it is just because of the software, isnt it?
Ehm.. micro USB 3.0 looks like in this picture (of course the upper one in the pic is micro USB 3.0 and the other one is normal USB 3.0: http://blog.tinydeal.com/wp-content/uploads/2013/03/USB3.0.jpg
Like you can see, the micro USB 3.0 cable end is bigger than in USB 2.0, which means it can't fit in the port of the SP. Thus it is a hardware issue.