Related
i was flashing ship ROM and on 1% it says this nbf is not for ur phone and stops, i've reset it and bootloader starts with ipl 1.01 spl 2.16, should i use NoID_ruu to flash other custom ROM?
you need to flash an official rom first, or a custom rom with updated bootloaders
dont look at my signature, that was before pda service replace my ROM with G3 chip, and ipl\spl was 1.0\1.03, then i did what is right to do - i flash an official ship rom, and then all go as i describe above
__s said:
i was flashing ship ROM and on 1% it says this nbf is not for ur phone and stops, i've reset it and bootloader starts with ipl 1.01 spl 2.16, should i use NoID_ruu to flash other custom ROM?
Click to expand...
Click to collapse
This is karma in action.
strange but last time i saw this combination of numbers my phone was dead , but now it's still alive, and i flash molski then faria rom and everything went fine. f..ing magic. praise the lord ppl.
__s said:
strange but last time i saw this combination of numbers my phone was dead , but now it's still alive, and i flash molski then faria rom and everything went fine. f..ing magic. praise the lord ppl.
Click to expand...
Click to collapse
=========
Try any 2.25 or 2.26 ROM before upgrading to Faria's, you'll have IPL, SPL 2.xx
dreamteam3x said:
=========
Try any 2.25 or 2.26 ROM before upgrading to Faria's, you'll have IPL, SPL 2.xx
Click to expand...
Click to collapse
thats what i did, everything is updated as my signature shows. thanx anyway
__s said:
thats what i did, everything is updated as my signature shows. thanx anyway
Click to expand...
Click to collapse
flash an official rom, then flash a custom rom
or maybe try downgrading to a 1.xx rom, then reflash and official rom, then flash a custom rom....
__s said:
thats what i did, everything is updated as my signature shows. thanx anyway
Click to expand...
Click to collapse
-------------------------
Here's what i did:
Original Rom on my 8125: IPL 2.25, SPL 2.25
-downgrade to 1.xx using CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM.=>Result: IPL 1.05, SPL 2.25.
-Copy and run Enaberapi.cab on my device
-Run lokiwiz 02b. Choose CID unlock.(fone restarts onced completed)
-Uprade to 2.26 ROM from Cingular_RUU_Wizard_2.26 =>Result: IPL 2.26, SPL2.26
-Upgrade again to FARIA's AKU 3.2 8MB.Result :IPL 2.26, SPL2.26 OS 3.0.0
Note:Faria's Rom doesn't include any bootloader version.You have to upgrade to 2.xx before uprgrade to Faria's.You may bricked your fone for a while if upgrading to Faria's with IPL 1.xx and SPL 1.xx
Good luck!
dreamteam3x said:
-------------------------
Here's what i did:
Original Rom on my 8125: IPL 2.25, SPL 2.25
-downgrade to 1.xx using CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM.=>Result: IPL 1.05, SPL 2.25.
-Copy and run Enaberapi.cab on my device
-Run lokiwiz 02b. Choose CID unlock.(fone restarts onced completed)
-Uprade to 2.26 ROM from Cingular_RUU_Wizard_2.26 =>Result: IPL 2.26, SPL2.26
-Upgrade again to FARIA's AKU 3.2 8MB.Result :IPL 2.26, SPL2.26 OS 3.0.0
Note:Faria's Rom doesn't include any bootloader version.You have to upgrade to 2.xx before uprgrade to Faria's.You may bricked your fone for a while if upgrading to Faria's with IPL 1.xx and SPL 1.xx
Good luck!
Click to expand...
Click to collapse
thanx ppl, but as said i did all this , everything is fine, im testing faria's rom atm, trying to figure out how to setup PAN, and a2dp seems have some problem too, but i think i'll manage this.
oops , its not allright, faria's rom flashed, os version is correct(build 3.2.0), but alot of things not working, i guess it is becuz of ipl 1.01 version, i need both of em to be 2.xx, i'll try to downgrade to 1.01 ruu costom rom, we'll see what will happend.
__s said:
dont look at my signature, that was before pda service replace my ROM with G3 chip, and ipl\spl was 1.0\1.03, then i did what is right to do - i flash an official ship rom, and then all go as i describe above
Click to expand...
Click to collapse
i wonder if your problems have anything to do with the fact that your chip was changed.. or maybe not done correctly
shogunmark said:
i wonder if your problems have anything to do with the fact that your chip was changed.. or maybe not done correctly
Click to expand...
Click to collapse
As far as i know, they will just change the whole maching rather than changing only the chips... The way the soldering is done on the chips means they can't be taken out easily...
vseehua said:
As far as i know, they will just change the whole maching rather than changing only the chips... The way the soldering is done on the chips means they can't be taken out easily...
Click to expand...
Click to collapse
they can actually, they are just surface mount chips, i used to work for a company doing component level repair on electronic devices... and removing a surface mount chip is quit simple with the right tools
shogunmark said:
they can actually, they are just surface mount chips, i used to work for a company doing component level repair on electronic devices... and removing a surface mount chip is quit simple with the right tools
Click to expand...
Click to collapse
I see... I am just thinking that these chips might be BGA chips, and hence can't be desoldered easily...
vseehua said:
I see... I am just thinking that these chips might be BGA array chips, and hence can't be desoldered easily...
Click to expand...
Click to collapse
didnt think of that, you might have a point there
The problem is that __s(tupid) just rushes in and doesn't read anything before flashing 'til the cows come home.
One clean guide. Thanks very much for this.
I am having a similar problem, had upgrades IPL/SPL to 3.08 and tried to load faria latest without success. tried to get the g3 8125 back to 1.xx using winbutton and lokiwiz but ende up with ipl 1.05 and spl 3.08. tried to use t-mobile 2.26 and the cingular oem and recieve an error saying i need to upgrade the nk.nbf. I am rnning out of ideas.
Thanks in advance for any help
Steve
Goibnui said:
I am having a similar problem, had upgrades IPL/SPL to 3.08 and tried to load faria latest without success. tried to get the g3 8125 back to 1.xx using winbutton and lokiwiz but ende up with ipl 1.05 and spl 3.08. tried to use t-mobile 2.26 and the cingular oem and recieve an error saying i need to upgrade the nk.nbf. I am rnning out of ideas.
Thanks in advance for any help
Steve
Click to expand...
Click to collapse
I think ur phone is still not unlocked,download WST Tool from the link below and check if it is CID unlocked,if not ,go through the unlocking method again:-
http://forum.xda-developers.com/showthread.php?t=329170
ur IPL1.5 & SPL 3.08,
keep on trying flashing button rom 1.05 a couple of more times u'll get both 1.05 or u may try this rom,it might do the trick:-
Xda_MiniS_LaunchROM_v154102
but personally, i believe ur phone is not cid unlocked,check it out
Not sure the history of the device, however it will go to Tri colour screen and allow flashing of certain rom, i.e. the custom get out of jail rom and other - Mr Clean, etc..
however after flashing they boot backup and sit on the boot screen in the case of custom rom, displaying the beer glass?
Err, help.
More
button custom rom
IPL 1.01
SPL 2.24
GSM 01.12.10
OS 1.5.4.2
Thanks.
lokidan said:
button custom rom
IPL 1.01
SPL 2.24
GSM 01.12.10
OS 1.5.4.2
Thanks.
Click to expand...
Click to collapse
If you haven't already, go to the thread for how to CID unlock your phone:
http://forum.xda-developers.com/showthread.php?t=285435
Since your IPL is 1.01, you can start at step 4. The key is that after you run lokiwiz, you need to get your SPL down to 1.x also, so you'll need to flash the Button ROM. A few people have mentioned they have had to flash it a number of times (like up to 8 times) to get both IPL and SPL to go down to 1.x (not sure why, but its happened a few times). AFter you get both IPL and SPL down to 1.x (on only after both are at 1.x) then continue with those instructions to flash an official ROM (the TMobile 2.26 one is linked in that thread and is a preferred one to use no matter what carrier you plan on using). Once that is done you will have a fully functioning phone running the latest official base rom. From there you can flash other custom roms if you so desire.
Good luck!
sorry, I didn't fully think about what your first post is saying. To do what I said above assumes you can use the phone in the current condition, but now I don't think thats the case. You should grab the Button ROM and flash it to see if you can get it to function (just flash it directly at the Boot screen). If that doesn't work, go get the TMobile 2.26 ROM and go ahead and try flashing it. if that doesn't work, then find and flash the Wizard Love rom. After getting one of these to work (and one of them should) then follow the CID Unlock procedure exactly (to downgrade, run lokiwiz, downgrade again, upgrade to 2.x).
further info
Thanks for getting back to me much appreciated.
I was under the impression that lokiwiz will not work unless your machine boots up?
Mine gets stuck on the initial button loading screen (beer glass)???
Will check through your link, i have been doing lots of reading etc, but cant find the definitive answer.
help
ahh, thread cross over
Will try the love rom.
Keep you posted.
Once again thanks.
tried Button Rom
Still stuck on the magic beer glass
5th time or re roming.
Cant get love rom quickly enough.
If you can do Torrents, search for Wizard_Love on PirateBay. Then just use uTorrent or BitComet to pull it. Its seeded and shouldn't take too long.
Hi all, i am stuck, i need the help of the experts in either saying my 2 Qtek 9100s are bricked - chuck them or, they are retreivable.
Here goes:
2 X Qtek 9100 made by T-mobile - emei if needed.
Both devices stuck on the boot screen, but will both go in to Tri colour screen for flashing, but fail flashing (with several roms), i think they have button rom, its a beer glass.
GSM: - 01.12.10
OS: - 1.5.4.2
ipl 1.01 and spl 2.24
Can these be revived?
Thanks.
A Wizard by T-Mobile is a "MDA Vario", you can't have a Qtek9100 by T-Mobile. Anyway..
Have you tried flashing official ROM while they are in bootloader mode (tri colour)? Does the flashing process went smoothly? Does the IPL/SPL change when you flash the latest ROM? Give more info.
More info
At present both of them are stuck on the info below, i cant reflash them with anything else now.
Official T-mob rom 2.26 will not work...think the error was [239] or something.
Thanks.
lokidan said:
At present both of them are stuck on the info below, i cant reflash them with anything else now.
Official T-mob rom 2.26 will not work...think the error was [239] or something.
Thanks.
Click to expand...
Click to collapse
sounds like u didn't accomplish step 16 of 'the definitive guide to unlocking & rom upgrading G3 wizards' by Dr Puttingham.
both IPL AND SPL need to be the same
lokidan said:
At present both of them are stuck on the info below, i cant reflash them with anything else now.
Official T-mob rom 2.26 will not work...think the error was [239] or something.
Thanks.
Click to expand...
Click to collapse
what was the exact error.. post the code and error msg.
i got the same problem
ipl/spl 1.01
i tried "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
many many time but nothing
please help
bigfatjack said:
i got the same problem
ipl/spl 1.01
i tried "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
many many time but nothing
please help
Click to expand...
Click to collapse
Since your ipl/spl are 1.xx just follow the sticky by Dr. P at the top of this forum. You will start at the step running lokiwiz as you don't have to downgrade. Then upgrade to an official 2.xx rom. After that you can flash a custom rom.
errors
Various error messages with various roms.
Invalid vendor
Invalid nkbf file
Upgrade only
I believe that these devices were upgraded by a user who perhaps did not fully unlock them.
Is it possible these devices would exhibit these error if they were flashed with a G4 rom, or would they just not boot if that was the case?
Thanks ALL
lokidan said:
Various error messages with various roms.
Invalid vendor
Invalid nkbf file
Upgrade only
I believe that these devices were upgraded by a user who perhaps did not fully unlock them.
Is it possible these devices would exhibit these error if they were flashed with a G4 rom, or would they just not boot if that was the case?
Thanks ALL
Click to expand...
Click to collapse
Well, the only difference between a G4 and a G3 rom is that the G4 rom will not contain IPL/SPL. If you flashed a G4 rom in a G3 device you are fine. If you flashed a G3 rom into a G4 device then you have bricked your devices.
In your case you haven't finished the unlock/downgrade process. like mentioned above you seem to have missed step 16.
You need to re-flash the button rom to get both the IPL and SPL to 1.01. Once that is done then flash an OFFICIAL carrier rom (T-Mobile 2.26 suggested). When you have completed that then your IPL/SPL will both be 2.26. From THIS point you will be able to flash a custom rom, you will have no success until then. The unlocking guide that is stickied contains everything you need to recover from your situation.
The 2 steps that most newbies forget is to downgrade a second time to get IPL/SPL to 1.01 and after you are completely unlocked then upgrade to an official carrier rom that includes IPL/SPL (note this unlocking procedure is not for G4 devices -- doing this will brick them) Once your IPL/SPL are 2.xx THEN you can flash custom roms.
Unlocking them
Thanks ZZan, i think though i have actually blown the rom with button, but it does not bring the ipl/spl down to 1.01, it appears to blow the rom and complete 100% reboots and comes up with button Beer glass and goes no further.....
Err help?
lokidan said:
Thanks ZZan, i think though i have actually blown the rom with button, but it does not bring the ipl/spl down to 1.01, it appears to blow the rom and complete 100% reboots and comes up with button Beer glass and goes no further.....
Err help?
Click to expand...
Click to collapse
Have you tried booting into bootloader and putting your carrier's latest rom back into it? I would suggest this. If all works and you can get completely back into the phone, you could try to unlock again starting from the beginning.
The only way you could have really hurt your device is if it was a G4 before you started, or interrupted the flash process while the bootloaders were being written. I don't think it would even boot up to that screen, or flash to 100% if this were the case though. It sounds like a bad flash from the first button attempt. I would suggest using a carrier rom from the carrier that the phone is locked to to get it back to working status. Once there then you can try to downgrade and unlock again.
Are they G3 or G4
How do i tell again, something to do with the ipl/spl revisions?
You can also try re-downloading the button rom and performing the downgrade again. I have the button rom in my sig. it's possible the rom may be damaged in some way.
G3 or G4.. from the wiki
A G3 Wizard will have the following
IPL: 1.xx or 2.xx or 2.xx.00x (Note that this version only has TWO 0's.).
SPL: 1.xx or 2.xx or 2.xx.00x (Note that this version only has TWO 0's.)
A G4 Wizard will have the following
IPL: 2.xx.000x (Note that this version has THREE 0's.)
SPL: 2.xx.000x (Note that this version has THREE 0's.)
button rom
Any ideas where i can get this rom from?
thanks.
Ignore me
just seen it on your footer
It flashes but....
it goes all the way through 100%, reboots and sits on rom boot screen exibiting:
IPL 1:01
SPL 2.24
GSM 01.12.10
os 1.5.4.2
And a nice picture of a beer glass....
Help, should i reflash again? i Have done it 3 times and it still sits on boot....
Thanks.
lokidan said:
it goes all the way through 100%, reboots and sits on rom boot screen exibiting:
IPL 1:01
SPL 2.24
GSM 01.12.10
os 1.5.4.2
And a nice picture of a beer glass....
Help, should i reflash again? i Have done it 3 times and it still sits on boot....
Thanks.
Click to expand...
Click to collapse
You said your phone was a T-Mobile phone. Flash the T-Mobile 2.26 rom and see if you can get it to finish booting. If so THEN you can retry the button rom. You are in a corrupt state right now. Whatever caused it, it doesn't look like the button rom is going to recover you from it. Flash the official carrier rom for your phone and get it back to working status first. Once you can use the device and phone then you can go back and start from the beginning of the unlocking thread.
T-mob original
I have tried T-mob original (RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe)
[294] invalid vendor ID
I have tried t-mob (RUU_Prodigy_1060204_105_11210_TMO_UK_Ship.exe) using NoVendorID and nk.nbf from above rom - Flashed 100% complete - rebooted - stuck on Button boot screen (beer Glass) and not booting.
Button itself will flash, with the same result, looks like its doing it then reboot, halt on beer glass.
I have i trully bricked these two? i cant have they flash and go to boot loader surely they would not do this if i had totally bricked them???
Help....
T-mob
Weird, it has upgraded the IPL to 1.06 (from 1.04) though, does this mean anything to anyone?
1-15. Done
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
when i try this I can't get the SPL to go back, IPL is fine, but i've tried 4 sucessive times, no chance..
I then tried this :-
Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me )
that went ok, and then I tried flashing roms, but the only one I can get to work is the Wizzard Love ROM.
I'd love to run WM6 but i can't, if i try the other ROMS they flash ok, but I just go back to the Wizzard ROM when it reloads
any ideas ?
very many thanks, Will
Will_Plaice said:
1-15. Done
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
when i try this I can't get the SPL to go back, IPL is fine, but i've tried 4 sucessive times, no chance..
I then tried this :-
Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me )
that went ok, and then I tried flashing roms, but the only one I can get to work is the Wizzard Love ROM.
I'd love to run WM6 but i can't, if i try the other ROMS they flash ok, but I just go back to the Wizzard ROM when it reloads
any ideas ?
very many thanks, Will
Click to expand...
Click to collapse
"17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM
This will give you a strong 2.26 IPL and SPL to work with."
'Now you SHOULD have a IPL and SPL of 2.26 to work with. If not, you screwed up! Don't attempt to install someone's hard work and ***** before you do these steps!'
EDIT for Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me
Well,
You missed the all important step 17,flashing the T-mobile 2.26,this cud have given you solid IPL/SPL 2.26 to work on,Instead opted for Edit to step 17,flashing 3.08.
Your device is not CID unlocked,download WST tool and check the status of your phone,
secondly you shudn't have upgraded your ipl/spl to 3.08,till you were sure your phone is cid unlock and both the ipl/spl are the same.
anyway download the wst tool to check your phone's status and post the report here,
bugger...
i tried another rom and am stuck in the bootloader...
i have 3.08 for IPL and SPL
I think the WST will not work from the bootloader (and i can't find it to download)
any further sugestions ?
I have tried both the t-mobile and button roms
tia will try not to do any more damage ;-)
Will_Plaice said:
bugger...
i tried another rom and am stuck in the bootloader...
i have 3.08 for IPL and SPL
I think the WST will not work from the bootloader (and i can't find it to download)
any further sugestions ?
I have tried both the t-mobile and button roms
tia will try not to do any more damage ;-)
Click to expand...
Click to collapse
In this particular situation no rom will flash,the only option is to get the IPL/SPL back to 1.xx,only than you can unlock.
If you are in boot loader,try to flash buttons 1.05 again,if worked,ok. otherwise download the latest official rom from the carriers site and flash,it will work and bring back your phone in working status.then flash button's 1.05 to unlock with lokiwiz02b.
Are you having any sdcard in your phone,remove it,it'll help,sometimes sdcard freezes the boot loader,by removing it,boot loader mode is released,good luck
many thanks, i came across a IPL SPL 2.26 only ROM and this I managed to get to flash, and with your advise I now have WM6
thanks, Will
Will_Plaice said:
many thanks, i came across a IPL SPL 2.26 only ROM and this I managed to get to flash, and with your advise I now have WM6
thanks, Will
Click to expand...
Click to collapse
THANKS
Glade it's up and running
Needed
1.an BREEZE device[The phone must be able to enter bootloader (3color screen)]
2.TerraTermPro http://rapidshare.de/files/39206549/TeraTermPro.rar.html
3.An rom matching to your device
GUIDE
1.Disable active sync - uncheck
file->connection settings->allow usb connection
2.Put the phone in bootloader mode
power the phone pressing power and camera keys
read and note all displayed info
3.Launch TerraTermPro on the pc
un the connection window check serial and choose USB
in the new open window type
info 2
and note the information
RIGHT - HTCSQTEK_A07„§m»HTCE
WRONG - HTCSF kEØ(HTCE
close terra term
4.Figure out wich rom you need
till now i have roms for
Russian Rom
QTEK_A07
HTC__A07
http://rapidshare.com/files/109782599/RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP.rar.html
WWE Rom (QTEK,HTC,Dopod,OCH)
QTEK_Z12
HTC__Z12
http://rapidshare.de/files/39206931/RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP.rar.html
DOPOD001 - Chinese Rom
http://www.megaupload.com/se/?d=YD49L7JD
5.
Flash the rom corresponding to your CID
6.
Boot the phone and application unlock it
7.
Run SSPL and UPGRADE to 6.1 rom and latest radio version
8.
Save the rom that saved you for latter - it colud help you again
IF YOU CANT FIND THE CID AND ROM HERE WAIT TILL SOMEBODY POSTS IT.
IN CASE OF "HTCSF kEØ(HTCE" IN TERRATERM IS VERY HARD TO REPAIR DUE TO DAMAGED BOOTLOADER
you can repair it using this guide
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
wich requires some advanced skills
OTHER ROMS - wich i dont have
i_mate_SP_JAS_1.15.301.0.exe
RUU_BREE100_1.15.71.6_1.06.00.00_OCH_Ship.exe
ruu_bree100_1.15.707.3_dopodwwe_ship.exe
ruu_bree100_1.15.709.3_dopodcht_ship.exe
Please help me to improve this list sending me CID's and ROM's
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
what do you mean by very hard to repair? it's impossible?
this is the ROM i flashed back to my phone (although the flashing is 100% completed successfully, it is still stuck at 2nd boot WM logo screen)
RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
i just uploaded th dopod rom in case anyone needs it
http://rapidshare.com/files/109798242/RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
alexnvidia said:
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
what do you mean by very hard to repair? it's impossible?
this is the ROM i flashed back to my phone (although the flashing is 100% completed successfully, it is still stuck at 2nd boot WM logo screen)
RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
i just uploaded th dopod rom in case anyone needs it
http://rapidshare.com/files/109798242/RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
use this wisely
jerpelea said:
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
use this wisely
Click to expand...
Click to collapse
how do i put breeze into KITL Mode? is it the camera+power button tri-colour thing?
reads what stands on hermes wiki page...
maybe i'm talking ****, but i think too enter kitl mode you must have a running windows mobile...
just find the kitl mode "reset" on hermes its "now for your Hermes: hold the Comm button and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL. "
futureshock said:
reads what stands on hermes wiki page...
maybe i'm talking ****, but i think too enter kitl mode you must have a running windows mobile...
just find the kitl mode "reset" on hermes its "now for your Hermes: hold the Comm button and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL. "
Click to expand...
Click to collapse
exactly.. that's the worrying part for me now. i have no idea how do i enter KITL mode in breeze. any ideas?
alexnvidia said:
exactly.. that's the worrying part for me now. i have no idea how do i enter KITL mode in breeze. any ideas?
Click to expand...
Click to collapse
no
i did this on my hermes once
having the same problem as you have on breeze
hermes and breeze share the same platform
we have to find the answer
How did you manage to screw the bootloader
can you provide us a list of what you have flashed on the device?
what is the brand,model(herm 100/herm160),vendor,region of your device
i am triing to figure an solution
all others upgraded succesfully to 1.34 rus getting HTC__A07 CID and after that radio and wm 6.1
what did you do ?
BR
jerpelea said:
no
i did this on my hermes once
having the same problem as you have on breeze
hermes and breeze share the same platform
we have to find the answer
How did you manage to screw the bootloader
can you provide us a list of what you have flashed on the device?
what is the brand,model(herm 100/herm160),vendor,region of your device
i am triing to figure an solution
all others upgraded succesfully to 1.34 rus getting HTC__A07 CID and after that radio and wm 6.1
what did you do ?
BR
Click to expand...
Click to collapse
ok. i have no idea hoiw i screwed up the bootloader too. this is what happens.
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine. then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
what should i do now? i really appreciate you/anyone taking the time to look into this issue. thank you.
have you tryed a hardreset??
and did you cid is now screwed up??
alexnvidia said:
ok. i have no idea hoiw i screwed up the bootloader too. this is what happens.
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine.
Click to expand...
Click to collapse
here you needed the sspl to flash official rom
i think that i have this im my tread
then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
Click to expand...
Click to collapse
here you screwed the botloader
now you have an older ipl that does not know how to load the new SPL
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
what should i do now? i really appreciate you/anyone taking the time to look into this issue. thank you.
Click to expand...
Click to collapse
did you try to hard reset?
the two "-" keys and power
???
futureshock said:
have you tryed a hardreset??
and did you cid is now screwed up??
Click to expand...
Click to collapse
yes. i tried hard reset (two soft keys+power then press 0) many times. doesnt work. tried the mtty to format the phone, doesnt work.
here you screwed the botloader
now you have an older ipl that does not know how to load the new SPL
ok, firstly, when i loaded up the SPL1.09, the phone boots up fine. it only got stuck when the flashing to WWE1.38 failed. at this point i still have the new IPL.
the old IPL was flashed in during the recovery attempt when i tried to flash the old official WM5 ROM back hoping it would also downgrade the SPL, but it didnt. it only downgrade the IPL to 0.9. SPL remains 1.09
alexnvidia said:
here you screwed the botloader
now you have an older ipl that does not know how to load the new SPL
ok, firstly, when i loaded up the SPL1.09, the phone boots up fine. it only got stuck when the flashing to WWE1.38 failed. at this point i still have the new IPL.
the old IPL was flashed in during the recovery attempt when i tried to flash the old official WM5 ROM back hoping it would also downgrade the SPL, but it didnt. it only downgrade the IPL to 0.9. SPL remains 1.09
Click to expand...
Click to collapse
im my guide i wrote to use sspl
if you use sspl you finish the 1.34 upgrade from spl 1.09 and is everything fine
if not no
from here you had spl A07 so you could flash ONLY original htc Rus rom
you flashed an older ipl instead
an older ipl that does not load correctly the new spl
the spl can not be downgraded from 1.10(1.09) to 2.05
here is the problem
and as long as you dont have an rom with your CID od HARDSPL the phone can only be flashed using my hermes guide if we find the buton combination on breeze
BR
jerpelea said:
im my guide i wrote to use sspl
if you use sspl you finish the 1.34 upgrade from spl 1.09 and is everything fine
if not no
from here you had spl A07 so you could flash ONLY original htc Rus rom
you flashed an older ipl instead
an older ipl that does not load correctly the new spl
the spl can not be downgraded from 1.10(1.09) to 2.05
here is the problem
and as long as you dont have an rom with your CID od HARDSPL the phone can only be flashed using my hermes guide if we find the buton combination on breeze
BR
Click to expand...
Click to collapse
so what you mean now is my IPL 0.9 is WWE and my SPL is 1.09 Qtek A07? and this is causing the problem? so can i flash the IPL on the phone to the lastest one in tri-colour mode so that it can read the 1.09 SPL? can u please provide me with the SPL upgrade file and utility?
any solutions so far? guys?
alexnvidia said:
so what you mean now is my IPL 0.9 is WWE and my SPL is 1.09 Qtek A07? and this is causing the problem? so can i flash the IPL on the phone to the lastest one in tri-colour mode so that it can read the 1.09 SPL? can u please provide me with the SPL upgrade file and utility?
Click to expand...
Click to collapse
no
your problem is that ipl 0.9 cant load spl 1.09
the memory load address differs and it cant load it correctly
i havent found an solution
you need an valid spl loaded to flash
you can try all the original roms (don't edit them)
and see if any one of them tries to push ipl and spl before actualy flashing
also try the official 1.09 spl flash
BR
nowaday, I found this thread useful. thanks
what happened? I was upgrading to futureshock ver. 4 and during phone'd swiched off ... I was looking for original ROM posted here in Breeze forum, but I didn't find it ... after read this 1st post I recoginze, that Czech ROM official is RUS .. that news for me (of course good ).
KITL Hermes
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried hard reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
I tried KITL Hermes unbrick method but same problems like had others on this forum, I don´t know how to turn my MTeoR to KITL debug mode because device is different like Hermes so key combination doesn´t matches with Breeze. MTTY - info 2 command show me CID: waiting interpreter failed...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
DOPOD601
which RUS update rom can i use?thanks
HTCSDOPOD601in眘HTCE
which rom?
can somebody email to : [email protected] or [email protected] ?
thank you