I upgrad my Qtek 9090 to WM 2005 a few days ago and now I want to revert it to WM 2003 but I don't have any backup. And I can't find any 2k3 rom in Xda ftp to download.....
In Qtek site I can find the page with has upgrades but I'm unable to download anything, I'm enter my IMEI and receive a message that says " Not a valid IMEI# (only Brightpoint authorized original products are supported by this site. Contact your place of purchase for ongoing support of your device)".
I think that is cos they don't store any IMEI if cell is sold outside Europe/Asia...
Well, searching in the net, I've found 2 2k3 ROMs, from iMate's ftp. One is i-mate_PDA2k_WWE_12200_162_10600_SHIP.exe and the other is PDA2k_PTB_12205_179_10600_SHIP.exe. I think the second ROM is in Brazillian Portuguese....
The question is: can I upload this ROM to my Qtek 9090, in order to revert it to WM 2003 ????
If the answer is no, someone can show me a link to download the correct ROM ?? For me, doesn't matter if this ROM is in english or Brazillian portuguese....
Thanks!
If you know how to install ROM you can install any of those (be aware of side efects and how to bypass device check; remeber you have to through downgrade procedure with ExtROM reformatting, if you deleted ExtROM while upgrading to WM5).
If you like any specific rom from the Wiki, I still have backup and can upload it somewhere for you.
If you want to downgrade, maybe it's possible just to fix your problems? WM5 is hudge step forward compared to 2003.
jakubd said:
If you want to downgrade, maybe it's possible just to fix your problems? WM5 is hudge step forward compared to 2003.
Click to expand...
Click to collapse
I know, but I want to test things like battery performance, wifi connection (I have access to 2 free hotspots but can't connect....)....
And when I upgrade to WM5, I don't remove ExtROM. After the upgrade, I shrink ExtROM to 2Mb. Then I whant to downgrade to test these things and, after my tests, make the upgrade again, exactly as stated in wiki....
And I only want any Qtek 9090 ROM, preferably umbranded, in english or portuguese, doesn't matter...
Oh, yes! I've searching, but no luck, for any cab that makes my hardware keyboard works right. My 9090 is in english (with WM 5) but my keyboard is portuguese one... Then, as you can see, it doesn't works right... And changes the registry entry (as stated in other topic), from 0h 20409 to 0h 20416 (the country code for Brazil) doesn't work. After softreset the code returns to original....
Thanks for your help!
AFAIK, WM03 do have better battery life n wifi connection (n don't forget about bluetooth).
Cannot Downgrade To WM 2003
I've installed WM6.1 but need to downgrade to unlock my extrom. However, my manufacturer firmware software no longer works. Any ideas?
Related
yes this is real.
The KJAM rom, which can be found in the FTP of this site, is working on the Qtek9100 !!!
does anyone have any thoughts about that? is this ROM a better one than the 9100? I think it is!
From what I understand, The KJAM is slower with its rom then the QTEK. Because KJAM is full of apps which might not be needed. Once those apps are removed it should be exactly the same ( are the rom version numbers not the same )
ANyone have any views on this ?
I believe the ROM dates are different, with the K-JAM being 9/16/2005 and the Qtek at 9/22/2005. I don't know the difference between the two, but I'd be interested to find out. Also, I'm still trying to find out how to change the splash screens (HTC, then i-mate) when it boots, but it's different than previous HTC models so far (not splash?.nb).
As for the apps, the difference does lie in the Extended ROM, so once you've custom-tailored that area, they should be identical.
HOWEVER, people on HowardForums are complaining about the Bluetooth in the 9100, where K-JAM users don't seem to be having an issue. I didn't check up further on this, can anyone confirm?
Would yo umind sharing information about details? How to avoid device ID error? IS there hacked exe file? I need to flash my QTEK with IMATE ROM since I think BT performance in IMATE is way better.
TIA
bt on the qtek smells
Grill! Wake up and give us a clue,please!
I did the soft reset after the WM5 setup so that the crap wouldn't install and it works great
so what did you do?
imate rom on a qtek???
i got a vender error when try to install the k-mate rom on my qtek 9100. what´s the trick, that it work without the error? please help!
nice we have to get around that.
Anyone try to place the Wizard in bootloader mode first before running the upgrade utility?
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
pimbo said:
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Click to expand...
Click to collapse
Hi,
I don't think this is the good way because I unpacked the "KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
I don't know which file have to change to "MaUpgradeUt_noID.exe".
Any idea?
THX
TB
Again, if I can find out how the NoID utility bypasses the check by comparing it with the original (does anyone have the exact file before it was hacked?), and we can compare, it'll be a start to look for similar code or text in the EXEs or DLLs of K-JAM's upgrade utility.
Find me the unmodified version of the NoID utility. Look on the FTP, and check all the other Blue Angel ROM update utility's EXE files...
thebiker said:
"KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
Well
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Click to expand...
Click to collapse
Looks to me that somebody who knows howto and has this phone for testing could to edit the The ROMUpdateUtility.exe to bypass the country id errors,
And use as refference maybe the hacked no id loader for the BA.
P.s. the original MA upgrade utility should be found in the original roms from the providers of the Magician devices, we got it from them if i'm right.
Hope it helpes a bit,
I'm no developer, but this file sticks out in my mind..."RUUGetInfo.exe" If that is part of the upgrade installer then it looks to me that it is looking for the actual device ID, and it probably has to fall within a certain range to allow the upgrade to proceed. Something to the effect that each country, language or brand has a range. If your device isn't in that range, you are SOL.
With each generation they do something different, and more difficult.
Dave
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
vbguru613 said:
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
Click to expand...
Click to collapse
Nah, it's Much more involved than that. Just look at the process taken to develop the method to do it on the JAM, PDA2K, and so on. With each generation they make it more difficult.
Dopod 838 > K-Jam rom upgrade.. need some work
I had under my hands the Dopod 838 which is infact the cH version of the WIZARD.
I would like to load the imate K-Jam rom to the Dopod
Playing a bit with the machine, it seems that the Boot loader is actually looks like the Typhoon, the TyphoonNBFTools utility will decode the NK.NBF file but I am not sure what is the Vendor ID of the Dopod.
On top of it after altering the Languge from English to WWE and made the vendor DOPOD, the romupgrade utility reports the new version going to Prodigy and the Lang is English. it seems that although the TyphoonNBFTools was able to decode the NK.NBF, the upgrade application did not take the header information.
I did run also the Boot loader command under the MTTY (on the usb port) and command that did work for the typhoon "R2ds all" responded that I do not have the authority to dump the rom image.
Tried the command password WIZARD and although it did take it, still was not authorized to dump the rom image.
If somebody could help find a method to bypass the protection of rom , upgrade (bypass vendor , Country code...) it would be very helpfull to exchange roms.
:shock:
I've been playing with the ROMUpdateUtility.exe
Well, i've also noticed that the rom is like a typhoon rom.
Ive removed some strings to RUUGetInfo.exe(since this one seems to do the thing), but i cannot test it,
I got error 222, device not responding, (DUH, its a BA :lol
Maybe somebody can replace this file for the original in the folder and try running it. (if it passes the country id and the model no)
But it is a test, use at your own risk.
Do not blame me for anything.
http://t-mobile.iris-global.com/files/BA_TMUK_14200_112_11300_Ship.exe
Seems to have appeared as the FINAL offical release from t-mobile for uk users.
I've not tried it yet but the number does seem to suggest it is a slightly lower version than the Dutch one
EDIT MDAIIIUser
Added to wiki
no surprises
build of 2003se identical to Dutch rom previously released:
version 4.21.1088 (build 15159.2.6.4)
Extended rom just hasth changed regional settings (english UK default)
Added to wiki
Still a lot of echo.
Can't pair my Motorola HS820, BA sees the HS820, but error on connecting.
Anyone a fix for the echo and for the BT problem?
Use 1.40 before, was less a problem compaired to 1.42
Please help.
Regards,
Max
Report Back - T-Mobile Rom.. One week or so on..
Hi All,
Wanted to feedback my impressions of the new 1.42 T-Mobile UK Spec Rom..
Well, it's been interesting.. I now have (or have had) most of the faults that everyone else is experiencing.. I never used to get them at all with the i-mate 1.40 Rom or the NL 1.42 T-Mobile Rom.. I have listed the bugs below..
1 - One Hard-reset when inserted into GPS Car holder
2 - Several occasions where I've "lost" the Storage Card (when serching for it on the device AND through Active Sync)
3 - Interesting situation where I've started TomTom5 and I've suddenly had to go through the set-up process again only to be told that there's no maps (Can only attribute this to an occasion where the Storage Card is not seen by the PPC - See above).. Solved by remove Programs, soft-reset then re-install off SD Card.. (quite annoying as I was lost at the time!)
4 - Occasional failure for BT Headset being recognised on an in-coming call (I use the Logi-Tech Pro).. Solved by Soft-reset..
5 - Sometimes, after soft-reset, get a low performance from the Device.. ie, after soft-reset and switching to phone where it takes a few seconds to "build" the phone screen..
Strange but as I mentioned above, I don't recall getting these bugs on the 1.42 NL Rom or the i-mate 1.40 Rom.. I might try a hard re-set on Monday then re-install my tomTom, etc to see if it carries on.. If it does, I MIGHT switch back to the either :shock:
That's it really.. I have had the early T-Mobile 1.06, the i-mate 1.40, T-Mobile NL 1.42 and T-Mobile GB 1.42 and finally the WM5 Roms and from what I've seen, I place them in this order of preference..
1 - i-Mate 1.40
2 - T-Mobile NL 1.42
3 - T-Mobile GB 1.42
4 - WM5
5 - T-Mobile GB 1.06
Hi,
Updated to the dutch ROM, is better then this UK ROM.
Version number is also newer.
Regards,
Max
dazed and confused
sorry if I'm being simple but ....
I though this was the last offical rom
http://www.iris-global.com/t_mobile_download/download_manager_mda_com.html
MA_TMUK_11300_128_11200_SHIP.exe
Rather than
http://t-mobile.iris-global.com/files/BA_TMUK_14200_112_11300_Ship.exe
How did you maanage to find the link?
What is the diference between the builds - How can I find a change log?
What is the BA / MA?
:?:
See here:
http://forum.xda-developers.com/viewtopic.php?t=31360
No difference in UK and NL Rom..?
[email protected] said:
Hi,
Updated to the dutch ROM, is better then this UK ROM.
Version number is also newer.
Regards,
Max
Click to expand...
Click to collapse
Hi Max,
The Rom is exactly the same and the only difference is the changes in the extROM that makes it either UK or NL Spec (ie, MMS settings, etc)
Hi Starfish - Perhaps you need to look at this for the answers to your other questions:
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_For_Beginners
Oh, and BA is "Blue Angel" and MA is the "Magician" HTC Names for the devices..
Sorry I did'nt read close enough Magican vs Blue angel
starfish_001 said:
Sorry I did'nt read close enough Magican vs Blue angel
Click to expand...
Click to collapse
That's ok.. We all have to start somewhere.. 8)
Now, I'm not too sure how far advanced you are in Upgrading, etc but before you do, please remember the following that I put on another post on here..
MrPhilly said:
General Tips to you (and others)..
If you do want to update or upgrade then make sure you read everything through first.. Make sure you're happy in doing it.. Perhaps use the search function to read through others comments.. I would also recommend reading others comments about trying to downgrade from WM5 to WM2003SE to see what others have encountered
You will not believe the amount of people who end up posting questions when they've not followed the instructions from Wiki that I've pasted for you here..
Finally, if you are stuck, use the search command and describe your problem in the Keywords section, select Blue Angel from the Category and read through the posts relating to it before posting questions..
Hope this helps..?
Cheers!
Click to expand...
Click to collapse
How can I upgrade to a stable rom
I have tried the TMobile NL and UK version both give the Country ID eror with the extra numbers 17-17-38-38-38
How can I safely upgrade to the 1.42 version (I have read the Getting Started With The Blue Angel) .
Is that the way to go?
"I get the password error on the xda3nbftool for the nbf segment"
I would like to get rid of all the phonesound failure and systemhangs with TomTom5.10
My Qtek9090
PH20B 0 B
WWE E
DANGA001
1.40.00 0 0
1.40.556
1.13.00 13.00
Upgraded to this from the last O2 update (my BA is an O2 Xda IIs), and while for the most part it works fine, now if the device turns the screen off for power-save while out and about, the GPRS connection drops. I know the hardware is capable of keeping the GPRS connection alive in such a situation because, well, it didn't drop it under the previous two O2 ROMs I ran.
Anyone else had this problem, or know a fix? Hopefully it's something simple that I've overlooked...
I'm getting better Bluetooth support with this (whether through actual improvements in the stack or through sheer dumb luck), so I'd prefer not to downgrade if I can avoid it.
Upgrade for NON OEM/Carrier Blue Angel
I have an unlocked OEM i-mate PDA2K. Because of this I am unable to install the T-Mobile upgrade to 1.42.
Is there a way to get around this?
I tried using the MaUpgradeUt_noID.exe, but I was unsuccessful.
Any ideas on how to upgrade a non-T-mobile branded blue angel?
Thanks
problems upgrading a non-t-mobile branded PD2K
BELOW IS THE SCREENSHOT OF THE ERROR
Did you make sure you had the MAUpdate file in the same directory as the actual upgrade had been uncompressed into? Since it's missing the RUU.DLL file that is part of that package.
Basically, get the files out of the real upgrade, then copy the MAUpdate into that directory, then run it instead.
I can not unzip or unpackaged the shipped OS
When I double click on the file, it runs the file, when you right-click and select extract, it gives you an error.
How do you unpackage the ship package?
Me, I used WinZip, I think it was.
Can not unrar or unzip setup files from exe package
the instructions states:
Unrar or unzip all files in exe or rar into a new folder. I get an error when I do that.
I also noticed that the instructions states:
First Method (Quick/Easy) (TYPE II), but there is another method Second Method (Slower/Harder) (TYPE I)
I am going to give that a try
O2 XDA IIs
Hi from Greece,
A friend bring me to Greece from Singapore one O2 XDA IIs but it has a old versions:
rom 1.31.00 wwe
rom date: 12/13/04
radio v:1.02.00
protocol version: 1337.32
ExtROM version: 1.31.920 wwe
sorry but I'm newbie here, can you tell me what (and where can i find) I must download in order to update to the latest versions.
I allready download the latest version from O2.UK for O2-XDA IIS but I do not want to lock my device to any network and that's the reason who asked you and I do not install this I allready download.
I allready see http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades but I don t now what I must download.
thk u
Hi there!
I've just get a Wizard, and it has a GER ROM. I'm qiute bad at german, (and english too) so I want to upgrade it to a WWE ROM. My question is, what is the most clean, and fastest ROM, and where can I download it? I think there must be a step by step for newbies, but where is it? (post link please),
If I upgrade my rom, will the slide-keyborad changes from QWERTZ to QWERTY? (Letter Z changes to Y?)
Where can I found additional reg tweaks, and modification (such as overclocking) to speed up my Wizard? Which of them is the most useful?
Sorry for the many quetions. Now you should ask "Why don't you use the Search button above?", sorry but I'm too excited about upgrading to WWE, but after I've done with that, I'll use it.....Sooory
Cheers,
Hi, you need to upgrade to aku2 imate rom.
download this http://www.clubimate.com/support/KJAM/ROM/K-JAM_WWE_216901_2169101_020710_ship.zip
unzip it
and then activesync your phone to the pc and run above exe.
(no need to unlock your phone as it is an imate rom)
Yes the keyboard will probably change but can be changed for your language use registry wizard see here and download version r and install
http://forum.xda-developers.com/viewtopic.php?t=39725
dont forget you also need to install this OpenNETCF.SDF.wce4.armv4.cab http://forum.xda-developers.com/download.php?id=9341
to get registry wizard to run. (reg wizard has the other tweaks you wanted)
For overclocking see here http://forum.xda-developers.com/viewtopic.php?t=40284
Thanks for the help. I've upgarded my Wizard with Summiter's rom, but my WiFi couldn't get work. so I'll try the iMate ROM ASAP.
Other questions about phone:
When I get it out of the box, it has a T-mobile ROM on it, and it has the ability to dispaly cell information.( about which town you are in), now my new ROM hasn't got this feature. Was it a Cab customization, or just an option in the WM5.0?
There is a thread here about cell info and a program you can try. http://forum.xda-developers.com/viewtopic.php?t=46803
Also you can get cell info from gsmtestmode.exe in \windows on the device and make a link to it.
Palm released the WM6-Update in English now.
How long will they need to release the update in other languages, for example German ?
I asked Palm but they even have no planned release date they could tell ....................
wuffi said:
Thank you for contacting Palm(tm) Technical Support.
Your case number is: X-XXXXXXXX
You ask when the Windows Mobile 6 upgrade will be available for the generic Treo 750.
Unfortunately we do not have a date for the release, but the "coming soon" shoul mean about a month.
Click to expand...
Click to collapse
So updates in other languages seem to be far away ....................
Vodafone Austria has just released the german update >>> www.a1.net/treo
Thanks for you info.
As far as i can see the update version is Treo750-2.18 carrier code VFD,
so Vodafone German.
I'll give it a try.
calico
pls, give us a feedback
calico said:
Thanks for you info.
As far as i can see the update version is Treo750-2.18 carrier code VFD,
so Vodafone German.
I'll give it a try.
calico
Click to expand...
Click to collapse
Can u give us a feedback on such things as:
Are the alternate symbols working, i.e. umlaute like ä,ö,ü with on click, or do u still have to hit the navkey three times down to choose them?
What kind of branding does this rom offer? A1 or Vodafone splashscreen for powering on and off the phone? Any waste of storage, like program links known from the att rom?
I am really looking forward reeding u'r experiences.
The only branding in this Rom is the Vodafone logo at startup and shutdown. No additional crap and apps like in the AT&T one.To get rid of the Vodafone logo you could make the Treo vanilla by deleting the extrom as described in other threads here.To get the Umlauts just press the alt key.
After the vanilla procedure
CC-Cap : 000-000-001
Carrier DB: 251
Free memory
Data: 54.65 MB
Programs: 28.53 MB
Firmware and OS-build are the same as in the English Vodafone-Version.
The Software-Version remains unchanged.
Well, I cannot update. When I start the original Update I'll get the error, that the update isn't for my device. I have a REGULAR Treo 750 not the Vodafone branded one. So I know it's not the "right" one. Where do I get a patched RUU.exe or something?
I expanded the Updater .exe-File and started the T750URT.exe and he Flashed a ROM, and as there's only one, namely CHEEIMG_FW.nbh I thought I would have WM 6 on it, but I didn't.
So can it be, that I have to unlock my device? Or is it an other problem?
To upgrade you can use the SD-card method described in this forum.
Or try this one:
- start the updater, stop at the first screen
- look at your temp directory, there is a new folder created
- edit the file "payloads.xml", in the section "carrier codes" replace the 3 letters with the letters you see on your treos system info
- go on with the updater (start update)
good luck
calico
have you tried to take the way with the Flashcard?
rename the Cheeimg_fw.nbh to cheeimg.nbh
format the SD-Card, copy file on it, reset while pressing the button below the volume-control and wait
A 750v (what you'll get - Imho) is not able to pull the Mailboxnumber from your Sim (if it's not a VF one) and it is not editable.
Can you imagine to make an Image of your original 750? Because it's german.
bezel said:
have you tried to take the way with the Flashcard?
rename the Cheeimg_fw.nbh to cheeimg.nbh
format the SD-Card, copy file on it, reset while pressing the button below the volume-control and wait
A 750v (what you'll get - Imho) is not able to pull the Mailboxnumber from your Sim (if it's not a VF one) and it is not editable.
Can you imagine to make an Image of your original 750? Because it's german.
Click to expand...
Click to collapse
If you tell me how, I would surely make an image of my treo 750 without V before upgrading to wm6. I would also love to have an backup, but i got no idea how to do it. And there's no Information in the Wiki.
hmm,
there must be some dump tools in the ftp area. I've never done this, so I can't tell you how to.
bezel said:
hmm,
there must be some dump tools in the ftp area. I've never done this, so I can't tell you how to.
Click to expand...
Click to collapse
Couldn't find anything on the FTP regarding Dumping a Treo ROM.
Will search buzz's site but if I can't find anything there and nobody can tell how to dump, I will upgrade without a previous dump.
upgrade succeeded
upgraded to austrian A1 (vodafone) image and got the following:
CE OS 5.2.1239 (Build 17746.0.2.4)
Software-Version: TREO750-1.14.VFD
Firmware-Version: 1.47.02.00
CC-Cap: VFG-VDE-013
everything is working fast and stable, sync with Vista and MDC 6.1 very fast, BT headphone Jabra 250 very good, UMTS/HSDPA with vodafone mobile flat very fast ...
OK, same for here:
upgraded to austrian A1 (vodafone) image and got the following:
CE OS 5.2.1239 (Build 17746.0.2.4)
Software-Version: TREO750-1.16-RWG
Firmware-Version: 1.47.02.00
CC-Cap: VFG-DEF-003
everything is working very fast and stable, sync with Vista and MDC 6.1 very fast
Will test BT-GPS-Mouse and navi tomorrow.
i explain in this post why put your treo wm6 in all lenaguages!
http://forum.xda-developers.com/showthread.php?t=331024
hi, I tryed to downgrade my qtek 9090 to wm2003se but I had no success.. i would do it because i have some problems with bluetooth. in this forum I found this article which explains how to fix bluetooth problems ( http://forum.xda-developers.com/showthread.php?t=274425 ) but I'm not able to find all files nedeed... is here someone who can help me? it's the same for me downgrade the rom or fix bluetooth problem.
I have the original rom downloaded from www.pocketdevice.it but when I try to install it, the installation software sais that with wm5 it cannot install the rom (ROM.Qtek.9090.v.1.40.04 ITA).
please excuse me for my bad english! I hope that I've been quite clear to explain my problem..
edit:
I found this page http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade but
# Qtek 1.40.556
# Qtek 1.40.553
# Qtek 1.40.147
doesn't work...
edit 2:
I tryed to restore an old backup but wm5 doesn't accept wm2003se's backup.. wm5 doesn't accept backup at all.. uff..
first to exclude the most common mistakes:
- did you set the phone in bootloader before starting the flashing?
- did you use the BAupgrade_noID.exe, instead of the BAupgrade.exe?
- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"
Lollo_RM said:
- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"
Click to expand...
Click to collapse
I know that, when you try and flash the original rom or original updates, you usually don't have to do the things above, but, when i had to downgrade to wm2003se, it wouldn't have worked without.
1. i try and attach the _noid.exe that i downloaded with a helmi rom, as google wouldn't find a direct download source and i wouldn't want to search this forum forever, and as you don't search it yourself, i assume you don't want to spend more time looking for it as well. Anyway, the noid.exe is the same flashing prog as the original but it bypasses the check for country id and other crap.
2. the bootloader mode is also essential because, well... i don't know, why exactly, but i assume that not all roms and flashing software manage to enter the bootloader mode correctly, or too late, and you could get stupid errors like it was the wrong device for that flash.
so, i hope, the upload worked, it is everything you need to flash your device, either put the "nk.nbf" of your rom in there, or unpack the original rom and put the noID file in that folder and start it
ok, i did exactly what you wrote and now everything work! thank for you help!
why would you even downgrade? i upgraded mine to wm6 and i think i'm not going back to 2003se
first of all, because english is not my mother language and the os language is english. i found some problems using bluetooth and wifi connections and i could not download the right patch so i decided to downgrade to wm233se
SIM TOOL KIT is the only reason one would want to downgrade
Maybe you could try an 6.1 ROM.
RUU_BA_xplode_WWE_6.11.00 works perfectly and has an standard wm6
interface.