Tmobile Wing Dialing Problem - Wing, P4350 Herald Upgrading

I have been having a weird problem with my wing. Sometimes when i try to dial out it doesn't let me do it and keeps saying "please try your call again later something about data session being active". but the funny thing is that there are no active data sessions. It shows by the signal bar that its connected to the gprs but when u click on it. It says that there are NO data sessions currently active. And when i tried browsing the Internet it doesn't work either. the only solution is to soft reset the phone. I even tried going into flight mode and back and that didn't do anything either. I am gonna hard reset the phone to see if that helps. Has anyone else experienced that ?.

I experienced the same on my XDA terra. Can't tell how to solve it or what it causes. Softreset is the only solution for me so far. Might be a WM6 bug in our build version.

GAMBIT999 said:
I experienced the same on my XDA terra. Can't tell how to solve it or what it causes. Softreset is the only solution for me so far. Might be a WM6 bug in our build version.
Click to expand...
Click to collapse
yeah possibly. It usually happens when i come out of the subway and the phone gets signals again it starts doing it or sometimes i make a call and then i hang up and it starts connecting to the internet immediately and i try making call again and it can't for a few mins but then it lets me do it. its like some sort of priority issue maybe. Maybe something in registry that u give the phone pad or the function of making a call higher priority then when its trying reconnect to the internet.

Related

Device switches on by it's self

When I switch off my XDA IIs by button or SW button in most of the cases the device switches on it self for one more time.
Is there anyone who can help?
Thanks guys!
:?:
I have the same problem, I had a bluetooth headset paired to it, maybe that is it, I only got the XDAIIs today so I have not had much time to watch it but it happened tonight and the XDA mini never does it.
Each time the BT headset is switched on or off and pairs up or releases, when a text message arrives, when you come out of a signal blackspot and reconnect and find you have missed calls etc.
Basically anything that results in a visual change caused the device to switch on.
Very annoying. Don't know the solution.
I share your pain.
Joe
I'm using http://www.trancreative.com/nicestart.aspx to keep the device locked, but it will turn on/off, but now it's locked so i dont delete data when it turns on in my pocket.
No matter what you do, the device will turn on at least once every hour.
I read somewhere that it does this to check the battery status.
I had the same problem once. Please open ActiveSync, switch the device off and see if ActiveSync is trying to connect..
Of course there can be lots of other reasons...
Yes I didn't mention on my post that activesync also seems to be a player in this problem.
If activesync is running, somehow the device syncs at varying intervals from 5 mins-1hr and switches it on to do so.
I used the attached to kill activesync to stop it happening.
Hope it helps.
Joe
I just unchecked the "Use mobile schedule to sync with this PC" setting and the problem was solved.
Though this seems to be a bug in ActiveSync..
Thanks
Works fine, great!
i had this problem on my old rom, and since i upgraded to 1.40, it aint done it since. maybe u need to upgrade.

Problems with WiFi access on Helmi

I SIM unlocked to use T-Mobile with my SX66 to do a comparison with my Wizard to see how this BA performs: I cant figure out if this is an older unit (05 versus 06??) or a newer one (400 MHz rather than 190 and a 2 megaixel camera on the camera units rather than a 1.3???) and installed Helmi, which has lots of features I don't need but which seems to be the only WM6 ROM around for this unit (?).
Installation went fine and without a hitch but now on boot up, I don't get a splash screen of whatever type: I get the initial bootloader screen, which is curious! But seems to be correct. However on that screen on soft reset, it shows the OS correctly but with a R 1.02.10 and a G of 1337.35. What is unusual is that on hard reset it shows both these settings as empty. Only on soft reset does it show the radio etc.
Slightly more worryingly (as I would like to test out VoIP on this unit) this BA wont connect to the Internet. WLAN is off by default and turning it on just flashes up a list of local WiFi LANs: It wont actually connect to any of them. it does take you through the steps and asks all the seemingly obvious questions (Is this the Internet or a work VPN? WHY SHOULD YOU CARE??) and at the end of the process, it just doesn't connect. Even more annoyingly, when it doesnt connect, it turns WLAN off again, so you don't really know when it did this (or, of course, why). It takes you through all the steps and then gives you the Configure Wireless Networks screen which shows all local networks which you KNOW to be available as "unavailable".
Is this a known problem with Helmi or does anyone recognise what I am doing wrong please?
I had the same problem with my BLUEANGEL (MDA III). The Upgrade to WM6 was totally ok. Everything is working, except the WLAN. Did you tried this: http://forum.xda-developers.com/showthread.php?t=343862
No, it just keeps disconnecting (things getting worse)
player_no1 said:
I had the same problem with my BLUEANGEL (MDA III). The Upgrade to WM6 was totally ok. Everything is working, except the WLAN. Did you tried this: http://forum.xda-developers.com/showthread.php?t=343862
Click to expand...
Click to collapse
The WLAN started trying to connect as I describe but now just doesn't even turn on in Comm Mgr.
Also tried upgrading to xplode but BA loses communication during the upgrade process. (Attempted to ask Xplode himself on that thread and will see if he has any idea)
i donno if this helps but wad i did was i turned on bluetooth. thn i turned on wifi.
it detected my wifi router entered my wep key thn logged on to internet. thn i switched off my bluetooth. i tried surfing and was ok.
i switched off wifi waited awhile thn turn on wifi.. it works flawlessly..for now
edit: u gotta use comms manager
badass7 said:
i donno if this helps but wad i did was i turned on bluetooth. thn i turned on wifi.
it detected my wifi router entered my wep key thn logged on to internet. thn i switched off my bluetooth. i tried surfing and was ok.
i switched off wifi waited awhile thn turn on wifi.. it works flawlessly..for now
edit: u gotta use comms manager
Click to expand...
Click to collapse
Yes, although bluetooth was already working, this seems to do something: I dont know what it is but it appears to be some combination of turning off and turning on again all sorts of things in CommMgr. Now it is working.
I wonder how long it will continue to work? It certainly doesnt let me open VoIP settings while connected. I still get a fatal exception when I try to do so and even though I have inputted all my VoIP settings, VoIP still doesnt work.
Still trying to figure out whether Xplode knows what is causing my failure to communicate WHILE upgrading from Helmi to Xplode.
licensedtoquill said:
Yes, although bluetooth was already working, this seems to do something: I dont know what it is but it appears to be some combination of turning off and turning on again all sorts of things in CommMgr. Now it is working.
I wonder how long it will continue to work? It certainly doesnt let me open VoIP settings while connected. I still get a fatal exception when I try to do so and even though I have inputted all my VoIP settings, VoIP still doesnt work.
Still trying to figure out whether Xplode knows what is causing my failure to communicate WHILE upgrading from Helmi to Xplode.
Click to expand...
Click to collapse
i am a noobie so i don't understand the term VoIP yet as i haven't read thru all FAQs and technical stuff lol pardon my noobness haha
anyway i wanted to update that today very early in morning when i tried using
wifi again the normal way but could not so i followed the steps again... and when it was working i pushed the reset button and till now which is abt 12hrs later still works ok ... i do not noe if its by chance or there is no way it shld work by my steps but it works for me and i hope it works for u too
btw i am using helmi's rom if it helps
cheers
hemi rom wifi not working
wifi not working i've tried it to turn on and turn off but to no avail
licensedtoquill said:
Yes, although bluetooth was already working, this seems to do something: I dont know what it is but it appears to be some combination of turning off and turning on again all sorts of things in CommMgr. Now it is working.
I wonder how long it will continue to work? It certainly doesnt let me open VoIP settings while connected. I still get a fatal exception when I try to do so and even though I have inputted all my VoIP settings, VoIP still doesnt work.
Still trying to figure out whether Xplode knows what is causing my failure to communicate WHILE upgrading from Helmi to Xplode.
Click to expand...
Click to collapse
I have made an interesting discovery about this flaky WiFi on the Blue Angel
pda2kstar said:
wifi not working i've tried it to turn on and turn off but to no avail
Click to expand...
Click to collapse
Often when I try to connect using IE and it says it isn't connected, it IS. I often get the message that I cant connect with the usual reference to completely useless settings pages or an offer to dismiss and give up on the internet connection.
But if I ignore it, I find that I mysteriously AM connected.

Phone cutting off after call or internet usage

I have a tilt and recently it started just shutting down when I had been on a call for about 4 minutes or when I was looking around on the internet for about 4 minutes. This was a std. tilt not flashed with HTC home installed. I hard reset it and hoped that would fix the problem, but it never did. So finally I decded to flash the ROM and see if that may make it better. alas it did not. I have tried everything I know, but everytime I get online or on the phone it just shuts off. Then it takes a few times before it will ever come back on normally. Does anyone know what is going on or what I can try to fix the problem. It seems as though my data is limited and cuts off after a certain point. I would really appreciate anyones help
Anyone have anything? It also cuts off whenever I connect to Facebook app. It tells me to check my internet conection
non of my wm phones ever had that issue
read up on it on google once it's it's an operator end hardware thing
not much you can do if the hardware they use don't support it
I was having the same issue with my tilt
I was having the exact same issue.
Check my thread :
http://forum.xda-developers.com/showthread.php?t=534732
I just solve the problem replacing the battery.
I got one of this
http://www.smavtronics.com/1600mah-li-ion-replacement-battery-fits-at-and-t-8925-tilt-series.html
and it has been working like a champ.

[Q] Hp TouchPad running Android - Wifi force close

I've tested this with a3.5, Xron and Miui and they all get this problem. Maybe installing certain apps trigger this to happen but wifi will eventually slow down when trying to connect to a signal and will be essentially non functional since the OS will basically freeze and then tell you to force close wifi and it requires a wipe and fresh install to fix.
Has anyone else run into this problem?
Check this and see if it helps you.
http://forum.xda-developers.com/showpost.php?p=20863566&postcount=14
StEVO_M said:
Check this and see if it helps you.
http://forum.xda-developers.com/showpost.php?p=20863566&postcount=14
Click to expand...
Click to collapse
I don't think its the same issue. In those instances you can still try to change which wifi signal you want to connect to, I think it just loops from connecting and it would disconnect. I think this issue is common and dropped connections occur as well.
But I'm talking about a situation where if you even try to enter the wifi options it will force close.
iamsamsamiam said:
I don't think its the same issue. In those instances you can still try to change which wifi signal you want to connect to, I think it just loops from connecting and it would disconnect. I think this issue is common and dropped connections occur as well.
But I'm talking about a situation where if you even try to enter the wifi options it will force close.
Click to expand...
Click to collapse
Before I changed it, it would take forever to get it to release the connection. I just kept hitting "Wait" rather than "Force close" it would take several minutes but would eventually come up and allow me to Forget the network.
It sure sounds like the same, not saying it is, but very similar.
I experienced this problem for the first time yesterday in area where was about 20 WIFI networks. Never ever it happened in my house on A2. A3 A3.5 or XRON2.8
http://rootzwiki.com/topic/13779-now-i-believe-that-there-is-wifi-problem/
I have the same issue today, Wifi setting is forced to close, and cannot connect to any Wifi signals. I think it's a bug and it related to the time or date. Because I didn't do anything and it just happened.
No new apps install, no setting changed, and the device was keep on, so it just happens.
Hope someone can find out where the problem is...so sad this happen on New Year's eve....
i have this problem also, the solution i found was letting the touchpad go dead and than begin to connect wifi again.
Similar wifi comments here: rebooting [or maybe toggling/other disconnect] with wifi on/remembered would get it into a state where it was scanning and connecting over and over without really ever working. this was only happening once it was 'remembered'. Going through the wifi settings to forget in this state involved hitting 'wait' a few times and then i'd reboot and readd. 1st wifi connect is always solid for me.
I've found: market.android.com/details?id=com.brilliapps.wifiandmorefixer
Does the same thing except it is one click. I rebooted after the first go, but now no longer. i run this and then readd wifi - all set.

Strange Network Data Issue

Hi
I have been using the Red Magic 3 for a couple of weeks now and I ma generally very satisfied with the phone, but there is one issue which is frustrating me.
I'm a delivery driver and when I'm driving around listening to Spotify, randomly the phone decides to lose the data connection completely and the signal bars will remain stuck on a certain amount of bars despite driving around and actual signal fluctuating. When it does this my data won't work again until I either reboot the phone or toggle airplane mode. It is doing this at least 3 times a day and I can't figure out what is causing it to do this.
Has anyone else experienced this and know how to fix it? Any help would be greatly appreciated.
gazm1990 said:
Hi
I have been using the Red Magic 3 for a couple of weeks now and I ma generally very satisfied with the phone, but there is one issue which is frustrating me.
I'm a delivery driver and when I'm driving around listening to Spotify, randomly the phone decides to lose the data connection completely and the signal bars will remain stuck on a certain amount of bars despite driving around and actual signal fluctuating. When it does this my data won't work again until I either reboot the phone or toggle airplane mode. It is doing this at least 3 times a day and I can't figure out what is causing it to do this.
Has anyone else experienced this and know how to fix it? Any help would be greatly appreciated.
Click to expand...
Click to collapse
Never heard/seen of this before. Are you on the latest rom update?
nabbed said:
Never heard/seen of this before. Are you on the latest rom update?
Click to expand...
Click to collapse
Thanks for the reply. No it's not something I've experienced before either, it doesn't affect WiFi just mobile data. I can't even spot a pattern or a trigger as to why it does it, it just seems really random.
I am currently on version 3.0 of the software which it says is the latest version.
It's so annoying because I am happy with this phone but this is driving me nuts because I can't even make or receive calls when it happens
gazm1990 said:
Thanks for the reply. No it's not something I've experienced before either, it doesn't affect WiFi just mobile data. I can't even spot a pattern or a trigger as to why it does it, it just seems really random.
I am currently on version 3.0 of the software which it says is the latest version.
It's so annoying because I am happy with this phone but this is driving me nuts because I can't even make or receive calls when it happens
Click to expand...
Click to collapse
I think 3.0 is the version of the update software.
The version of the rom can be found in Settings/System/About. It should be something like 1.11 or 1.15 (latest US version.) 2.09 if it's global version.
Now, just a wild idea here: the back of the phone is metal so the only way radio can transmit is through the screen or two metallic antenna bands at the top and bottom sides of the phone. Are you by any chance putting the phone screen down on something metallic?
Also, just to make sure that it isn't some rogue app that is doing this, you could try using the phone in Safe mode, which temporarily disables all installed apps - hold down power button until Restart button appears, hold down Restart button until it asks if you want to reboot into safe mode.
gazm1990 said:
Hi
I have been using the Red Magic 3 for a couple of weeks now and I ma generally very satisfied with the phone, but there is one issue which is frustrating me.
I'm a delivery driver and when I'm driving around listening to Spotify, randomly the phone decides to lose the data connection completely and the signal bars will remain stuck on a certain amount of bars despite driving around and actual signal fluctuating. When it does this my data won't work again until I either reboot the phone or toggle airplane mode. It is doing this at least 3 times a day and I can't figure out what is causing it to do this.
Has anyone else experienced this and know how to fix it? Any help would be greatly appreciated.
Click to expand...
Click to collapse
This has me a bit worried, I'm looking at buying one of these and I too am a delivery driver. Where are you located? Maybe something unique to that area? Also what network. I use Red Pocket Mobile (a MVNO reseller) so I can switch to any of the main carriers of tower usage. Currently using their At&t. Could maybe be an issue with APN settings. If you didn't enter any, you may want to google them and try entering in one manually.
nabbed said:
I think 3.0 is the version of the update software.
The version of the rom can be found in Settings/System/About. It should be something like 1.11 or 1.15 (latest US version.) 2.09 if it's global version.
Now, just a wild idea here: the back of the phone is metal so the only way radio can transmit is through the screen or two metallic antenna bands at the top and bottom sides of the phone. Are you by any chance putting the phone screen down on something metallic?
Also, just to make sure that it isn't some rogue app that is doing this, you could try using the phone in Safe mode, which temporarily disables all installed apps - hold down power button until Restart button appears, hold down Restart button until it asks if you want to reboot into safe mode.
Click to expand...
Click to collapse
Apologies, yes it's the global version 2.09.
Well the phone is in a car phone holder made of plastic when the problem occurs so it shouldn't be that causing it, it also doesn't affect any other phone I've had.
Many thanks for the suggestion of a rogue app, I'll do a factory reset and just install the basic apps I need for work and see if that does the trick ?
benjmiester said:
This has me a bit worried, I'm looking at buying one of these and I too am a delivery driver. Where are you located? Maybe something unique to that area? Also what network. I use Red Pocket Mobile (a MVNO reseller) so I can switch to any of the main carriers of tower usage. Currently using their At&t. Could maybe be an issue with APN settings. If you didn't enter any, you may want to google them and try entering in one manually.
Click to expand...
Click to collapse
Hi, I'm located in the UK and I use the EE network in SIM 1 and Vodafone in SIM 2.
Yes if could be an APN issue as when I put my Sims in the phone they text me saying that they couldn't send the APN settings remotely and I'd have to input them myself, but the settings were already there. I'll try deleting the ones that are there and input them manually.
I think this phone doesn't play very well with the networks here in the UK generally as whenever I have voLTE activated on the phone, all incoming calls show up as unknown callers. I've seen reports of this happening on several UK networks so looks like it might just be that the phone isn't optimized for the UK networks
I have same one .. u solved ut?
I have red magic 6pro and I am seeing exactly this behaviour!! Very frustrating. How to fix this.
I just i stalled the chinese version with android 11 and get way better signal, but is bloatware city and struggling to uninstall gapps. I hesitated before to install chinese version but is something I should have done long time ago.

Categories

Resources