Database Develop

Need tapres.dll from a Windows Mobile 2003 SE Device

Hi i have the problem that i cannot copy the tapres.dll of my MDA Compact to my PC for modify. This has the "pressed" Buttons inside i have found tapres.dll for WM 2003 but i need the one with landscape graphic inside (WM2003 SE).
Can somebody help me to show me a way to copy this file to pc ... when i modify the registry for example tapres2.dll i can't copy the tapres.dll too!
Thx for your help
Snappy

here u go 8)

hmm, think this is not the same one like the one on my device, there is not the image inside like the tapres.dll from a wm2003 device ... perhaps you can show me a way to copy the tapres.dll from my device to my pc i need it in german too.
Thx for your help
Snappy

Snappy said:
hmm, think this is not the same one like the one on my device, there is not the image inside like the tapres.dll from a wm2003 device ... perhaps you can show me a way to copy the tapres.dll from my device to my pc i need it in german too.
Thx for your help
Snappy
Click to expand...
Click to collapse
You cannot copy/move/rename the ROM dlls. What you can do is to go to the ftp.xda-developers.com site, and perform a dumprom from the ROM images available on the site. To download dumprom and FAQ, goto wiki-xda-developers.com site and search for dumprom.
Bear in mind that if you then copy the new tapres.dll into the /Windows folder of your device, it exists as a run-time copy that the device manager will use instead of the original one in your ROM.
However, the new DLL cannot survive a hard-reset, and you must copy it back to the /Windows folder after a hardreset.
Last time, I think some of the drivers for Compact/Mini/JAM are customised for the hardware only. I'm not sure about taperes.dll, but you can try porting and see if it works. Good luck!
Anyway, here the tapres DLLs from a GERMAN ROM.

Thx alot for your help, i have found the graphic in the tapres.96.dll but i have only heard about a way to change the graphic by change the registry to a other dll...

Ok here an information for anybody who wants to create own skins for dialer on MDA3 and MDA Compact with Key Pressed graphic.
- modify the normal graphics with any graphic program
- extract the .ico files from the tapres.96.dll for example with "PE Explorer"
(Icon_Entry: 1 is for Standard and 2 is for Landscape graphic (3 is sqre))
- modify the .ico for example with "axialis icon workshop"
- replace the icon files with "PE Explorer" and save the .dll to a new name like tapres.97.dll
- modify the Registry Key HKEY_CURRENT_USER\ControlPanel\Phone\IcoFil to your filename "tapres.97.dll (original its tapres.dll)
- softreset
Thats all ;-)
Hav fun Snappy

Anyone have idea how to make my qwertz keyboard work in WWE

After I flash the MDA Vario into K-Jam WWE rom, the keyboard qwertz cannot work good. i.e. press Z, then get Y. So anyone have idea can we make the registry edit like MDA Pro, so that the qwertz also work good in WWE Rom?

try this:
4. for the german keyboard on english ROM
4a. get a registry editor (like Resco)
4b. search the Change the key
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
4c. edit - Layout in decimal to 66567

I am looking for this too .. but that key doesnt exist.
I did find:
\\currentcontrolset\control\keyboardlayout
active > 00000409
is this a value tot change ?
anyone knows the german code ?

I am looking for this too .. but that key doesnt exist.
I did find:
\\currentcontrolset\control\keyboardlayout
active > 00000409
I changed it to the settings on the german version
407
no result ...

imdnme said:
I am looking for this too .. but that key doesnt exist.
I did find:
\\currentcontrolset\control\keyboardlayout
active > 00000409
I changed it to the settings on the german version
407
no result ...
Click to expand...
Click to collapse
Yes, I tried the same as you tried, still no use. I guess may be a *.dll or some files for German Keyboard layout is needed.

i think is it the file keybddr.dll in the windows dir, i can not try it
because i had no other version from the dll
regards, Peter

I have still an original German 9100 and see the file also the
compime.dll. They are different from the WWE ROM, but there is no way I can copy these files to try it.
Any idea ? :roll:

rename it on the ppc, then copy the other files ...
bye, Peter

as i remember ,
I can copy the file out after Super CID unlock

How can I find the keybddr.dll in my PPC? I cannot find it!

Finally find out, cannot delete or change or copy the keybddr.dll file, anyone knows how can we replace or change the file?

If you don't want to edit the registry manually try using Registry Wizard. It's available for download in the regular Wizard forum and has an option for keyboard layout.

eklisiarh said:
1. Install the registry editor like Total commander ( http://ghisler.fileburst.com/ce/tcmdpocketarm.exe ) or Resco Explorer ( http://www.resco.net/pocketpc/explorer/downloads.asp ) to your Pocket PC
2. Open the program on your device and go to [HKEY_CURRENT_USER\ControlPanel\Keybd].
3. Create New String Value (if you already dont have one with the name Locale)
4. Type in Value name: Locale
5. Type in Value Data: 0407 (as i have an german device. NOTE: You've to look in the "LCIDHex" column on this site: http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx for fourther area codes)
6. Close the window by clicking on Ok
7. Exit the program
8. hold your powerbutton for a few seconds until you'll be asked if you really want to switch your device off, click on YES
IMPORTANT: DO NOT RESET DEVICE WITH STILUS BY PRESSING RESET BUTTON
9. Turn on your device and it should work.
Click to expand...
Click to collapse
I already try that and it doesn´t work
i have wm5

Anyone with english keyboard, please enter.

I wan´t to configure the keyboard with the english keys.
Now I have in spanish, because I´ve the spanish rom installed, but the letters typed on my keyboard correspond to the english version (I think. See the image).
Could anyone see in a registry editor the value of the Layout in:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
I currently have on 0x20C09
¿What is the value of the english keyboard configuration?
Thank you very much.

My Qwerty key has one value:
Layout
The hex data DWORD it contains is: 0x20409

Here Patch
Go to this
ftp://xda:[email protected]/BlueAngel/ BA_AZERTY_Hardware_Keyboard_Patch_for_WWE_ROM.cab
Don't change anything , just run it after downloading here

Here Patch
Go to this
ftp://xda:[email protected]/BlueAngel/ BA_AZERTY_Hardware_Keyboard_Patch_for_WWE_ROM.cab
Don't change anything , just run it after downloading here

What does that localized keyboard file do? Does it let you type in Chinese?
ftp://xda:[email protected]/BlueAngel/Localized_Keyboards

Mr. Clean 2.24a AKU2.3 Rom with Dutch language (how-to)

Today I had some talks with Risidoro and Asukal about changing languages on Roms without upgrading to a whole new Rom.
Risidoro introduced me to Asukal after a question from me about Rom Cooking.
After some talking with Asukal about his "UI Language Switch Program" for Universal he gave me some files that I tested a few times.
Right now I am running a fully stable Mr. Clean 2.24a AKU2.3 Rom with dutch language, so for all dutch folks, here you go...
UPDATE: Right now I am running the latest 2.26 T-Mobile Rom, without problems!
[EDIT FRIDAY, 28th JULI]:
FINAL INSTRUCTIONS (for now....)
Definitive instructions to change the English Mr. Clean 2.24a AKU2.3 Rom into the Dutch language
- Install the Mr. Clean Rom
- Install these 5 files, I installed everything to the Main Memory, I advice you all to do the same!
1) Wizard_AKU2_NLD_mui_Tool.cab
2) NLD_Notifications_WIZ.cab
3) NLD_Today_113.cab
4) DUT_SMS.cab
5) NLD_Registry_Changes.cab
- Soft-reset your Wizard by turning it off and on (not with the Soft-Reset button!)
- Run through the (Dutch) Welcome Screen for screen alignment etc.
- Go to Settings -> Regional Settings (Instellingen -> Landinstellingen) and set it to Nederlands
- Delete the file \Windows\initobj.dat and rename \Windows\welcome.lnk to something like welcome.bak.lnk
- Delete the folder "\Program Files"
- Delete the folder "\Windows\Fonts"
- Delete the folder "\Windows\Favorites"
- Delete the folder "\Windows\Programs"
- Delete the folder "\Windows\Start Menu"
- Delete the folder "\Windows\Start Up"
- Delete the folder "\Windows\PDFfonts" (optional, but I did it to get 2MB extra free space because I don't use ClearVue PDF!)
- Remove all English folders in \My Documents (EXCEPT THE TEMPLATES FOLDER, in this folder the Camera Templates will be stored!)
So you can delete the Camera Templates from \My documents\Sjablonen
- Soft-reset your Wizard by turning it off and on (not with the Soft-Reset button!)
- Run these 2 files (located in this thread, somewhere below on the 1st page)
1) MP-Shorcut-MMS1-Voice-CV-TMUS-060404.CAB
2) NLD_MMS_FOLDER.CAB
- Done!
Regards,
Molski

Realy nice!
Gonna try it and will let you know if I have the same issue
Wondering though.. ..Wil this also work on the AKU2.5 that is being developed here at the moment?

Not good, i cannot remove or rename welcome.lnk.......
Any suggestions, tried total comander and the windows explorer...
edit: Solved the problem on my own: First with total commander tap'nhold --> properties and disable the read only checkbox.
then goto shortcut tab and edit this to something....
then it is possible te rename..
Yeah not beautiful... but it works so what the heck....

mccune said:
Realy nice!
Gonna try it and will let you know if I have the same issue
Wondering though.. ..Wil this also work on the AKU2.5 that is being developed here at the moment?
Click to expand...
Click to collapse
It will work on AKU2.5 after some development from Asukal and some testing from me, offcourse when I got it working, you all will get it working

My litle contribution to this fantastic idea
For the Dutch T9 follow the next steps:
In the attachment are three files:
1 - dictprob.dat
2 - statdict.dat
3 - mssp2_nl.lex
Copy them to the \Windows dir and replace existing files.
Then make the following changes to the registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Spell Check]
"Main_Dict"="\Windows\mssp2_nl.lex"
Restart your device and it should work like a charm
[edit]
The following location was not in my registry:
"HKEY_CURRENT_USER\Software\IA Style\IA CameraWizard(Pocket PC)\3.00\"
Second, I’m not able to rename or delete the Welcom.lnk
I’m using TotalCommander, and my device is decertified. When I change the properties or rename the file it looks like everything goes well. But when I refresh the file is still there.
[/edit]

Great contribution!!
The following location:
"HKEY_CURRENT_USER\Software\IA Style\IA CameraWizard(Pocket PC)\3.00\"
has to be:
"HKEY_CURRENT_USER\Software\IA Style\IA CameraWizard(Pocket PC)\3.00\Strings"
I'm almost ready with the CAB file that takes care of these registry changes, including the T9 stuff.

mccune said:
My litle contribution to this fantastic idea
Second, I’m not able to rename or delete the Welcom.lnk
I’m using TotalCommander, en my device is decertified. When I change the properties or rename the file it looks like everything goes fine. But when I refresh the file is still there.
[/edit]
Click to expand...
Click to collapse
Uncheck the read-only for this file and then go to the properties and remove the entry, OR rename the file like I did to something as welcome.bak.lnk

Here it is, the CAB file with the registry changes, with the files for T9 including one extra file (autocorrect.txt) from a dutch Rom, for (I guess) spellchecking.
I installed the file on my device and got no problems, I don't wanna say it is 100% correct, but I really guess it is, so were heading for 5 final files for installing Dutch Language on EVERY Non dutch Rom
By the way...don't forget to delete the old English subfolders of My Documents guys
I love it to be Dutch

Looks great!
I don't mind that the welcome.lnk stays. It only lets you run the welcome screen once, in Dutch. After that it doesn't show up anymore.
I followed the instructions about the ReadOnly settings, but like I said it looks like it changes the name of the file. But after a refresh it's back again
Glad to be of some help concerning the Dutch spelling

I updated my NLD_Registry_Changes.CAB file.
Because the Camera has some problems, although I change the "Frames" string, every time you select a picture template the setting is resetted.
So the solution is to delete every English subfolder of My Documents EXCEPT for Templates (!!), but on the other hand, it's not a bad idea to have al the camera templates in a seperate directory

Where is the update cab file? is it the one posted above?

ny-hardcore said:
Where is the update cab file? is it the one posted above?
Click to expand...
Click to collapse
Yes, but please read the 1st again, I updated the post with final instructions (for now....)

I also tested this language Pack on the new T-Mobile 2.26 Rom and I can confirm it's also working on the new Rom.
My advice for now is, don't use the Mr. Clean Rom anymore, but the new T-Mobile 2.26 Rom and don't install the Extended Rom to keep it as clean as possible (or manually select what you want to install).

Hmmm... ..just came to tell you that I also run the latest T-Mobile ROM in Dutch now. No problems so far! 8)

I really find it very cool that we don't have to wait anymore for Roms in dutch!
We just grab the latest WWE Roms and turn it into Dutch, no problem
The Mr. Clean Rom was cool to test with, but I'm happy with the 2.26 Rom.

are there any other languages?

Nope, not explictit for the Wizard, only for Universal.
These packages that I am using now were custom created by Asukal especially for the Wizard!

is it possible to do the same thing for french ?

@Molski
I think you can also remove "\Windows\Favorites" Because there is a directory called "Favorieten" for the Dutch users

mccune said:
@Molski
I think you can also remove "\Windows\Favorites" Because there is a directory called "Favorieten" for the Dutch users
Click to expand...
Click to collapse
Yep....you're right on that

[ROM][GER] new german O2_1.57.207.1_Radio_52.60.25.33 ROM

Just found on o2online.de ... and it's newer as the official HTC german firmware (1.56.407.2) but with old radio
go to http://portal.o2online.de/nw/support/downloads/software/xda/htctouch/index.html

hmm but no changelog available i guess!?

Improved functions and fixes, you can find here... http://www.htc.com/hk-en/SupportDownload.aspx?p_id=179&cat=2&dl_id=547
It's ROM version 1.57 - 207 means only provider firmware german (407)

so what is new in this ROM
O2 version
and
HTC Version

with this rom my acu is over night empty i trie today a english rom!

I have just noticed this thread.
Can anyone using this ROM confirm that the O2 homezone indicator is working with the HSDPA icon?
Regards
K_Hismoom
EDIT: I tested it myself and it finally works!
I will extract the necessary files and make a cab for use with other ROMs.

Now, as promised, here is the updated CAB for the O2 homezone indicator, confirmed to work on Dutty's WM6.5 R9, but it should work on every other ROM as well.
This version has been modified to work on all locales.
Necessary registry keys have been modified in the inf to reflect the new version number.
Note, that it displays the homezone image only on the TouchFLO 3D homescreen, so if you disable TF3D you will no longer see it.
To customize the appearance you can do the following:
- The file 6b3eaf1e_manila - found in \Windows - is the little "house" image, in QTC format, you can change this to whatever you like
- This version now displays the word "home" next to the homezone image. This is configured in the registry. Change the value of key HKEY_LOCAL_MACHINE\SOFTWARE\HTC\HZI\Tag to whatever you want - even an empty string, if you want nothing displayed. TF3D will update this immediately without a restart. -- DOES NOT WORK, it will be reset to "home" when the homescreen is updated.
What you could do is modify the file 1bf4fdc4_manila, which is the lua script that controls the homezone image and text. All you need to do is convert it to ascii, decompile, modify the line
HomeZone.String = Operator_machineStatus.O2HomeZoneString.Value
to
HomeZone.String = "<Your Text>"
recompile it and convert back to unicode. You can find the necessary tools at http://winmo.sztupy.hu
Hope you like it.
Regards
K_Hismoom