Related
Ok... I want to upgrade my PDA2k, but am a bit on the chicken side. Has anyone created or cooked a COMPLETE ROM for the PDA2k that they can post a download link to?
I can do the flash myself, but don't know how to cook a ROM and don't have the tools. I would appreciate any help I can get.
Thanks!
ROM Upgrade
Read this site. It's all here.
This FTP site has the ROM for Blue Angel. I used this one to upgrade my PDA2K. Works much better than the released version. Only problem is with sound after using the built in MS PocketPC CLOSE command; just don't use it, use another program like "Launcher" that has it's own CLOSE command which does not cause the problem.
Here is the FTP link: ftp://ftp.xda-developers.com/BlueAngel/BlueAngel_Roms/BA_1.40_radio_1.20_untested_extrom/
ChrisSpera,
Can you post a reply once you do the upgrade? I'd like to do it too, but I'm not as sure as you are on what to do. I also have a PDA2K from the US and would like to know how it goes.
Thanks,
Tom
Well, I got a little help from one of the patrons of this site, and I did get my PDA2k flashed with the 1.40 ROM, 1.12 Radio, and am working with a somewhat baked extended ROM. I've actually been tweaking it most of the day.
If you're using Cingular with your PDA2k, make certain that you grab the Cingular settings file from Club i-mate. You'll need those, as the settings in the SX66 ROM I used aren't quite right, though they work. Applications that automatically dial out via GPRS will not function correctly with the Connection Settings in that ROM. I am working with the guy that helped me to test the fixed connection settings, and when they are fixed, I'll let you know.
If you're using T-Mo, then make sure you get THOSE settings from Club i-mate and use those instead.
All is good, though! It works! I did have one hiccough, though; as my PC lost connection with the device BEFORE any flashing started. I bounced the box, leaving the device in the cradle, and was able to pick it back up from the beginning without any problems.
The device seems snappier. It connects to the PC faster, and boots faster. Pretty cool all told!
Thanks for the feedback! I hate to say this but I already started. It's been pretty slow in the office today, so I said...what the hell...and went for it. Wish I knew about the tmobile thing though. I'm just finishing the upgrade.
Where do I put the tmo information? Or, what do I do with it?
Tom
Chris,
What version is your extended ROM? Mine is 1.22.162 WWE
BTW, mine had the same problem with losing the connection. It's happened twice now. I updated my radio and the same thing happened. Strange.
Tom
I am using the SX66 1.40.110 (i think) version of the extended ROM.
If you go to the support area on club imate, and click on the Operator settings link in the support downloads area, you should be able to find a download link for a CAB that installs T-Mo connection settings. download it and use it to create your connections settings on your device.
I downloaded it and installed it. Didn't find it real helpful. I still had to go through everything to get mms and email setup. Oh well. Thanks for the tip though.
I've had it up and running for the past 24 hours and while I think the OS works a bit better I can't see a huge improvement. The phone is more responsive though.
Any notes on changes would be helpful. I did notice that the BT connects had a strenght signal now, which I find really helpful.
Question: Was this upgrade supposed to do anything to the extended ROM? Because the version is the same as before.
Thanks,
Tom
ChrisSpera said:
I am using the SX66 1.40.110 (i think) version of the extended ROM.
Click to expand...
Click to collapse
I just comprehended your post. Sorry about repeating the question when you already answered. How, or why, should I upgrade the extended ROM? I take it the upgrade I just did did not put the upgraded files in the extended ROM?
Tom
The extended ROM, which is about 16MB in size holds the custom software that comes on the device. You don't have to upgrade it at all. You can leave it be if you're happy with the software that's there.
Correct me if I'm wrong, but shouldn't the upgrade that was just performed by you and I install the new files into the ext rom automatically? Or, do I have to do it manually....copy the cabs from the laptop to the ext rom?
I've just been reading about cooking an ext rom and I'm going to give it a shot.
Tom
that depends on the files the update contained. Look for *.nbf files in the temp folder you launched the update from. What was in there? MS.nbf is the OS, radio.nbf is the phone and nk.nbf is the extended ROM.
I think I screwed something up. radio.nbf and nk.nbf were in the temp file but MS.nbf was not. Was it in yours? I believe I pulled the same file as you did from the link provided but there's no mention of it in there.
I also took a look at my extrom folder and none of the files that were listed in the link are in there nor loaded. I guess I'm getting things confused. Did you copy all the cabs into the extrom folder then run BAUpgradeut.exe? I just ran BAUpgradeUT.exe and thought they'd copy them over. I think I was wrong.
Tom
now obsolete
new aku2 here
http://forum.xda-developers.com/showthread.php?t=279908
so am i right in presuming that the gprs settings and phone settings are present in the rom? if not, how do we find them?
ALSO:
T-Mobile are releasing a rom update this month (ie this coming week!) so it might be worth looking at what they have done, not just for wifi fix but any other maintenence changes. Apparently they do alot of testing on their roms so there might be useful stuff there.
t-mobile gprs and wap settings are part of the extended rom. the 3 cabs files that begin CAB-Customization-...
i didnt include them as i'm on O2. This is more like a 'Qtek' version for the charmer, a universal version. doesnt include any operator specfic content.
looking forward to that update, hopefully its aku2, everyone else is releasing theres at the moment.
SDIO
What about SDIO drivers in this debranded OS?
so if i back up my current rom cabs and then install this, if it all goes pearshaped, i can relaod the origional and not end up with an expensive paperweight?
i wanna do the deed, but am scared as hell with it being my first PPC and only a few weeks old at that.
but anything to speed it up, its like im running windows or something.......
oh!
:wink:
only way you could mess up is if you pull the plug or have a power cut! while uploading the new os. remember to backup all your contacts and stuff as you'll need to hard reset.
you can start all over again if it doesnt boot or something by using the install package on the t-mobile site
http://t-mobile.iris-global.com/download_manager_mda_com2.html
just go into the phones bootloader, with the phone off, hold down camera and plug in the sync cable until the 3 color boot screen comes up and run the install package to go back to factory.
It worked!!
Dear dave106 and all;
i tried your fantastic upgrade yesterday. This was my experience:
1- I works like charm!
2- you might find it easier to use Total commander to uncheck 'system' and 'read-only' in the properties of the windows folder on your charmer, before Unlocking CID (to avoid any error).
3- alternatively you might use Lockiwiz 2b from this forum to unlock and unlock CID first.
4- the ROM upgrade went fine, showed some error messages on the charmer screen (nothing to worry about) but did not indicate an end. I unplugged it after 20 minutes. It rebooted on itself et voila, it was up and running.
5- Changing the boot scrren went very smoothly.
6- I noted that the T-mobile customization (after the new config.txt) did not install at all. I had to manually install the CAB listed in the config.txt file to reload the MMS and GPRS settings.
But now my charmer has no T-mobile crap on it...
However, i did not notice any dramatic change in speed....
Ill check your unbraded rom for wifi sdio capabilities over the next few days (on a 'just in case' basis). I'm just recovering from a totally borked pagefile on my main pc so ive been too busy to try as of yet.
is this howto working on that device ?
http://www.vodafoneshop.de/shop/det...schaeftskunde&I_ID=4000&Artikel_Daten_ID=3208
or can i damage something with your howto over there ?
supreme2k said:
is this howto working on that device ?
http://www.vodafoneshop.de/shop/det...schaeftskunde&I_ID=4000&Artikel_Daten_ID=3208
or can i damage something with your howto over there ?
Click to expand...
Click to collapse
thats a wizard, so you can just cid unlock it and install the imate or qtek wizard roms. the mda compact 2 is unique to t-mobile no other operator has it.
aeh....your sentence sounds strange to me, is it possible for my device or not ?
supreme2k said:
aeh....your sentence sounds strange to me, is it possible for my device or not ?
Click to expand...
Click to collapse
lol, in a word, no.
i am from czech and i dont understand all of this.
This is OK? or only any idea..
is really decustomization my mda compact II? I have tmobile
(i dont can it)
i flashing new rom....
after 10minutes say my mdac "aplication repllog.exe dont start"
...update is OK, and i have second problem
when customization is start it said " \Extended_ROM\CAB-Customization-Connection-TMUK-Charmer-Nov15.sa.CAB"
DOESNT IT, I DONT HAVE THIS FILES IN EXTENDED ROM ++
and third problem, my storage card doesnt work ( i have2gb pretec...
only after the update
dead link
Can someone please post a working to the debranded rom? The current link does not work :-(
Thanks,
Dzim
funkus said:
Ill check your unbraded rom for wifi sdio capabilities over the next few days (on a 'just in case' basis). I'm just recovering from a totally borked pagefile on my main pc so ive been too busy to try as of yet.
Click to expand...
Click to collapse
Funkus,
did you try wifi sdio with this debranded rom?
tnx
Re: dead link
Dzim said:
Can someone please post a working to the debranded rom? The current link does not work :-(
Thanks,
Dzim
Click to expand...
Click to collapse
try it now, some tit nuked the uploads again
Got the Rom Working, the difference is quite noticable. Re wrote the extended ROM to auto customise just enough to get the MMS and GPRS to work correctly. Did any one work out if a WiFi card SD card will now work?
Would like to know before i buy one!
Re: dead link
dave106 said:
try it now, some tit nuked the uploads again
Click to expand...
Click to collapse
Thanks a lot, I have spent few hours searching the Web for this file, but couldn't find it. Thumb up!!
Dzim
aWizard not reconizing os.nba
Hi,
have followed instructions as above but when I go to write new rom it can't find os.nba.
Anyone have any ideas on what i'm doing wrong or what to do next?
I'm a noob, obviously :roll:
First of all, I install T-mobile clean 2.26, I recall the internet working and with activesync, cause I got sbsh weather updated. Dunno why now it does work on my gf phone. Then I bought a phone and install the T-mobile 2.26 and realize it didnt' work and mokiz version too, then I try Mr. Clean 2.24a, and still doesn't work.....any help would be great.
My home connection with PC.
Microsoft activesync 4.2 on telus DSL line. Try all these rom,
My 8125 CID lunlock ...not sure..I tried to unlock it but dont' know if I got it
IPL -1.08 SPL 2.25 ...try all these rom....Mr. Clean 2.24a, Mosik 2.26, Sumitter 2.24, T-Mobile 2.26.
My gf 8125 CID lock
IPL 2.x SPL 2.x too, try all the rom on hers too, same prob.
But I swear her phone could update the weather before cause i'm looking at it wiht only two days with weather but now I can't do it.??
I thought it was my computer setting cause one time my comp frozen and had to reboot and it was around the same time. So instead I tried on my brother labtop which he just formated so everything should be alright.
But I was still unable to connect to internet with Activesync or bluetoothl.
Please help ......big Cooks.
There's a checkbox in AS that lets you forward the connection... tried that?
I'm running the molski 2.26 rom and had a mr clean rom before, as well as some factory TMO/I-Mate/Qtek roms. Never had any problem connecting with AS.
Appreciate the help and reply.
Hi, tomasz
Thanxs for pointing that out, in AS, I went to connecting setting and found what you were saying, the section my computer is in automatic setting, but I also tried my computer is connected to internet. Still I get this error in IE when loading a webpage, "The page you are looking for cannot be found due to unkonwn error 0x80072f78".
I wouldn't be so annoy if I didn't have internet in the beginning, but when I first got my 8125. Everything works fine with Mr. Clean and T-Mobile rom, without touching any setting in my comp and the phone, AS works like a charm, internet thur AS work fine without any manual setting.?? I didn't know things can change so much all a sudden? I hope someone out there know exactly what the problem is? thanxs again for the post tomasz, hope you have another solution or someone out there does....
Q9100 half dead!!!
Hi pals..
Listen gotta a big problem with my Qtek 9100.This is it. I've tried to update the pda to spanish so I could sell it to a friend of mine.I've downloaded the 1.3.7.5 version from xda-dev.Everything was working fine but in the middle of the process the power in my house failed.So the process stoped now I got the damn OS in Spanish but it doesnt work because it didnt installed properly.I've tried out everything I new about this pda.That is try to install in bootload mode,the only thing I've managed was update the IPL and SPL (that I dont know what doest that means) for that I've used an Orange ROM,if it would have updated properly it would show up the W2k5 customised by Orange but no,it keeps stuck in the same Qtek welcome star up image.
What and I supposed to do? I heard that I could install it loading it direct from the SD Card but I have to do it by copying an Backup SD card already done once mine OS is damaged. I've already tried the one in Dutch on the XDA ftp web page.But it seems not to be working.
Regards
Luiz Santos
Finally got my internet working thur AS
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
help... tried upgrading from wm2003 to wm6
I have now got to a point where the screen is dark with serial at the top & v2.07 at the bottom.
can anyone tell me how to get out of this & explain in easy terms how to upgrade to wm6
thanks
CHALFONTCOURIERS said:
help... tried upgrading from wm2003 to wm6
I have now got to a point where the screen is dark with serial at the top & v2.07 at the bottom.
can anyone tell me how to get out of this & explain in easy terms how to upgrade to wm6
thanks
Click to expand...
Click to collapse
That is the Bootloader screen and you should be there. I would have sent you to the wiki, but it is not working currently. If you are updating to another WM2003 ROM then run the file you downloaded now, if you are updating to WM5 or 6 or 6.1 then run the MA_Upgrade file now.
Kasush said:
That is the Bootloader screen and you should be there. I would have sent you to the wiki, but it is not working currently. If you are updating to another WM2003 ROM then run the file you downloaded now, if you are updating to WM5 or 6 or 6.1 then run the MA_Upgrade file now.
Click to expand...
Click to collapse
HI KASUSH
THANKS FOR REPLYING.
IM STILL A BIT LOST AS TO WHAT TO DO NEXT.
I CANNOT ACTIVE SYNC ANYTHING TO MY PDA. WHEN I PUT THE PDA IN THE CRADDLE THE SERIAL WORD GOES TO USB. AS I MAY TELL, IM A COMPLETE NOVICE AT THIS.
I HAVE A FILE ON MY DESKTOP STATING ASU3.5.2
THANKS KASUSH
ROB
CHALFONTCOURIERS said:
HI KASUSH
THANKS FOR REPLYING.
IM STILL A BIT LOST AS TO WHAT TO DO NEXT.
I CANNOT ACTIVE SYNC ANYTHING TO MY PDA. WHEN I PUT THE PDA IN THE CRADDLE THE SERIAL WORD GOES TO USB. AS I MAY TELL, IM A COMPLETE NOVICE AT THIS.
I HAVE A FILE ON MY DESKTOP STATING ASU3.5.2
THANKS KASUSH
ROB
Click to expand...
Click to collapse
I honestly have no idea what that file you have is. Go here and follow the steps to upgrade to WM6:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
You can find several WM6 and WM6.1 ROMs here:
http://forum.xda-developers.com/forumdisplay.php?f=386
Those 2 links should provide everything you will need.
Hi Kasush
Thanks again for replying.
Hopefully last question
I have saved the the Helmi ba wm6 file to my pc.
How do i transfer/run it to the ba if you dont have active sync?
rob
CHALFONTCOURIERS said:
Hi Kasush
Thanks again for replying.
Hopefully last question
I have saved the the Helmi ba wm6 file to my pc.
How do i transfer/run it to the ba if you dont have active sync?
rob
Click to expand...
Click to collapse
Are you running windows XP or vista?
Do you have activsync 4.5 or newer installed?
Have you tried putting the phone into bootloader mode (serial/usb on top, version on bottom) and run MA_Upgrade that came with the Helmi files?
Hi Kasush
Nearly there hopefully.
I have load the files from the websites you sent me.
The problem I have now that i cannot get wifi to work & when i put my sim card in, the phone doesnt work.
I have the following info:
rom VERSION 6.10.00. WWE
ROM DATE: 2/27/08
RADIO VERSION: NONE
PROTCOL VERSION: NONE
EXTROM VERSION: XPLODE_7.00
I HAD UPLOAD VERSION 1.15 RADIO VERSION, BUT IT DOESNT SEEM TO HAVE WORKED.
ANY ADVICE WORK BE WONDERFUL.
THANKS
ROB
CHALFONTCOURIERS said:
Hi Kasush
Nearly there hopefully.
I have load the files from the websites you sent me.
The problem I have now that i cannot get wifi to work & when i put my sim card in, the phone doesnt work.
I have the following info:
rom VERSION 6.10.00. WWE
ROM DATE: 2/27/08
RADIO VERSION: NONE
PROTCOL VERSION: NONE
EXTROM VERSION: XPLODE_7.00
I HAD UPLOAD VERSION 1.15 RADIO VERSION, BUT IT DOESNT SEEM TO HAVE WORKED.
ANY ADVICE WORK BE WONDERFUL.
THANKS
ROB
Click to expand...
Click to collapse
For the phone not working soft-reset. Some say you need to soft-reset twice, but I have never had to. There is a flaw in WM6 that when you disconnect the battery then connect and boot it fails to load the phone module. After booting a soft-reset will load it no problem.
For the wi-fi issue. Goto CommManager and click settings (in the lower right) and then click WLAN settings. Click turn on WLAN. This step loads the wi-fi driver. Now go to CommManager and click on wi-fi and it will work. This step must be done after EVERY reset/boot. But it only must be done once. after that you can turn on and off the wi-fi using only the CommManager as much as you like.
Glad to hear you got WM6.1 loaded and everything though.
Dear all Kaiser anchestor,
I have a problem with my Kaiser. I really hope that all of you can help me. Ok? Please....
This is the problem :
At the begining, My HTC Kaiser run so slowly, sometimes freezing (Condition WM 6.1 with it's SPL 1.56)
After I read the same problem in jockyw2001 thread, then I tried to flash My device SPL to 3.28 (with the step in front of that thread and the SPL from that thread too)
Flashing the SPL to 3.28 was successfully and my device run fast now
BUT!!! I can't Enabled my WiFi!
Next, I tried to Re-Flash my SPL to 1.56 again, and it's done successfully. But, the WiFi still can't be enable.
Next step, I tried to downgrade the ROM to WM 6, and WHAT!
I still can't Enable my WiFi!
Now, I'd upgrade to WM6.1 again (official ROM from HTC website). But, the WiFi still can't be enable.
The condition when I enable the WiFi is loading then turn off by itself. What's the problem?
I really need all of your help for this.
This is my Device Information:
ROM Version :3.29.707.0 WWE
ROM Date : 05\07\08
Radio Version :1.65.16.25
Protocol Version : 25.83.40.02H
After upgrade to WM6.1, My Bootloader now is:
KAIS130
SPL-3.29.0000
CPLD-8
I'm stress already. Hope all you may spare some of your time for help me to solve the problem. Thanks before. For more detail, just watch the video that I record when tried to enable the wifi.
The url is : http://www.andrylim.com/others/WifiProblem.wmv
Whats wrong with running the HTC upgrade on your HTC original TyTN II?
andrylim said:
After upgrade to WM6.1, My Bootloader now is:
KAIS130
SPL-3.29.0000
CPLD-8
Click to expand...
Click to collapse
Since you're interested in running the official HTC WM 6.1 version on your TyTN II then why not simply run the HTC Upgrade program which will reinstall everything required (SPL, Radio and ROM) in one easy go rather than have to upgrade this and that, bit by bit? If you have an official TyTN II you can get it from HTCs e-Club/Support or you can also download it from the XDA Kaiser Wiki ROM page. Note that my SPL is 3.28.0000 and thats all through the official upgrade path so maybe your SPL has something to do with it? See if the official upgrade installs on your device otherwise you'll have to revert to the correct SPL before trying again. Note that the newest WWE ROM upgrade now also comes with a (slightly) better radio as in my sig. Remember to take your sim and memory cards out before attempting the flash.
***Edit*** Just realised you're running the SEA rather than WWE HTC ROM I'm using so yes 3.29 looks to be the right SPL for your ROM, the rest still applies though.
Hmm...
Sorry Mr Flying Kiwi, I think you didn't read the message completely. I've already re-flash from OFFICIAL ROM WM6.1 from HTC e-Club. But, the same problem. It's not fix yet. I've reflash over than 5 times, downgrade to WM6 over than 2 times. an the result is the same. My WiFi Cannot be enable. I hope you can play the video that i record from the links up there (440kb only), so you will know my problem.
Thanks for your reply Boss!
or this one
The url is : http://www.andrylim.com/others/WifiProblem.wmv
Flying Kiwi said:
Since you're interested in running the official HTC WM 6.1 version on your TyTN II then why not simply run the HTC Upgrade program which will reinstall everything required (SPL, Radio and ROM) in one easy go rather than have to upgrade this and that, bit by bit? If you have an official TyTN II you can get it from HTCs e-Club/Support or you can also download it from the XDA Kaiser Wiki ROM page. Note that my SPL is 3.28.0000 and thats all through the official upgrade path so maybe your SPL has something to do with it? See if the official upgrade installs on your device otherwise you'll have to revert to the correct SPL before trying again. Note that the newest WWE ROM upgrade now also comes with a (slightly) better radio as in my sig. Remember to take your sim and memory cards out before attempting the flash.
***Edit*** Just realised you're running the SEA rather than WWE HTC ROM I'm using so yes 3.29 looks to be the right SPL for your ROM, the rest still applies though.
Click to expand...
Click to collapse
Use the official upgrade package - not just the rom file
andrylim said:
Sorry Mr Flying Kiwi, I think you didn't read the message completely. I've already re-flash from OFFICIAL ROM WM6.1 from HTC e-Club.
Click to expand...
Click to collapse
I read it alright but as you've not done it *using the officially supplied HTC upgrade package (not just the ROM file within it from HTC e-Club)* I reccomend you give that a try. No special hard spl version is reqd and as long as you have an official ROM to start with and you're upgrading or reinstalling the same ROM version, it's simply a case of running one file and following the instructions. Once you've got the reflash to run that way and completed the process, simply hard reset and then test your Wifi before installing anything further.
But, the same problem. It's not fix yet. I've reflash over than 5 times, downgrade to WM6 over than 2 times. an the result is the same. My WiFi Cannot be enable. I hope you can play the video that i record from the links up there (440kb only), so you will know my problem.
Click to expand...
Click to collapse
Perhaps the capturing program over Activesync may be interfering with things (but I did view your wmv). What I am sure of is that if you have the correct ROM matched to your device and correctly installed with the right spl and radio, Wifi should work fine. Running the official upgrade is the easiest way to get this but if there is something non-official about your current setup, the upgrade program may refuse to run. Let us know if that happens. It's clear that you didn't do this in the beginning because you ended up with the wrong spl version for your rom so it's time to do it the official 'HTC Customer' way.
Hahaha.... thanks for your information. I'd tried yesterday. And still no response. ugh.... Btw, I've read from another thread (Athena). They said that someone ever got a problem like this. The cause is the WiFi MAC Address is missing/erased? Is it possible? I thought that MAC Address is a serial number of WiFi such as an IP, where saved in WiFi chip/device and cannot be erase. If do so, how to set an MAC address to the WiFi module? Do you have an idea? I'd tried to have a silly search about that address in Registry, but I cannot find any key that sounds about MAC Address. (Mac Gyver maybe?)
Flying Kiwi said:
I read it alright but as you've not done it *using the officially supplied HTC upgrade package (not just the ROM file within it from HTC e-Club)* I reccomend you give that a try. No special hard spl version is reqd and as long as you have an official ROM to start with and you're upgrading or reinstalling the same ROM version, it's simply a case of running one file and following the instructions. Once you've got the reflash to run that way and completed the process, simply hard reset and then test your Wifi before installing anything further.
Perhaps the capturing program over Activesync may be interfering with things (but I did view your wmv). What I am sure of is that if you have the correct ROM matched to your device and correctly installed with the right spl and radio, Wifi should work fine. Running the official upgrade is the easiest way to get this but if there is something non-official about your current setup, the upgrade program may refuse to run. Let us know if that happens. It's clear that you didn't do this in the beginning because you ended up with the wrong spl version for your rom so it's time to do it the official 'HTC Customer' way.
Click to expand...
Click to collapse
More specifics needed
andrylim said:
Hahaha.... thanks for your information. I'd tried yesterday. And still no response. ugh...
Click to expand...
Click to collapse
I was offering serious advice not pulling your leg. Now, when you say 'still no response yet' - precisely what do you mean (exactly what did you try and what happened)? I've flashed my Kaisers ROM a couple of times now using HTC official ROM upgrading packages and it's gone perfectly fine. As far as the MAC address goes, I know there are ways of changing it (because there is an extremely small possibility that you may end up with two identical MAC adresses on the same network and this will cause problems) but this won't be the culprit in your case. I think (again) the first thing to do is to use the official package (and only that - no additional tools/utilities are reqd) to get everything in order and let us know how that goes and what versions of everything you end up with.
This is the information that appears in my device now after re-upgrade the official ROM from HTC e-Club:
File name : RUU_Kaiser_DOPODASIA_WWE_3.29.707.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
KAIS130
SPL-3.29.0000
CPLD-8
ROM version : 3.29.707.0 WWE
ROM date : 05/07/08
Radio version : 1.65.16.25
Protocol version : 25.83.40.02H
Btw, may i ask a question? I found something strange about a MAC address. Yesterday I'm not intention open the "Wireless LAN" from Settings > Connections > Wireless LAN
In Advance tab, there are Status, MAC, and IP. My Question is is the MAC address serial appears even you didn't enable a WiFi? In my device it's empty.
Btw, bro... I've been search a problem like this in this website. I've found the same problem in Athena thread. They said that the MAC address is missing, but some one make a fix but only for Athena.
this their URL: http://forum.xda-developers.com/showthread.php?t=387454&highlight=Athena+WiFi+Problem&page=5
Thanks & sorry if i waste your time in solving my wifi problem
Flying Kiwi said:
I was offering serious advice not pulling your leg. Now, when you say 'still no response yet' - precisely what do you mean (exactly what did you try and what happened)? I've flashed my Kaisers ROM a couple of times now using HTC official ROM upgrading packages and it's gone perfectly fine. As far as the MAC address goes, I know there are ways of changing it (because there is an extremely small possibility that you may end up with two identical MAC adresses on the same network and this will cause problems) but this won't be the culprit in your case. I think (again) the first thing to do is to use the official package (and only that - no additional tools/utilities are reqd) to get everything in order and let us know how that goes and what versions of everything you end up with.
Click to expand...
Click to collapse
andrylim said:
This is the information that appears in my device now after re-upgrade the official ROM from HTC e-Club:
File name : RUU_Kaiser_DOPODASIA_WWE_3.29.707.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
KAIS130
SPL-3.29.0000
CPLD-8
ROM version : 3.29.707.0 WWE
ROM date : 05/07/08
Radio version : 1.65.16.25
Protocol version : 25.83.40.02H
Click to expand...
Click to collapse
That looks right to me but if you haven't yet ran the upgrade file above to flash to ROM you need to do it the official way and try that. If Wifi is still behaving as in your video do a hard reset and try again (before loading any additional software).
Btw, may i ask a question? I found something strange about a MAC address. Yesterday I'm not intention open the "Wireless LAN" from Settings > Connections > Wireless LAN
In Advance tab, there are Status, MAC, and IP. My Question is is the MAC address serial appears even you didn't enable a WiFi? In my device it's empty.
Click to expand...
Click to collapse
In mine it's empty too but if you go back in after enabling Wifi, theres a MAC address in there. I really don't think your problem has anything to do with the MAC address but if you've tried all of the above and still can't get it working, as you appear to have an official setup, it's time to contact Tech support and get them to go through some checks over the phone with you. Maybe someone else has thoughts on this......
Hahaha... thanks. Btw, I have another problems.
I bought this device from other country (Singapore). My friends said, the Singapore HTC can view the device history. They can see if the device already being flash how many times and anything unofficial program such as SPL or radio, then the warranty wil be void. Because, my friends already have such a problem also with his device Dopod U1000 (Even he revert to his original SPL or radio).
I think i should throw this device or sell it out and buy the new one. Hiks...
Flying Kiwi said:
That looks right to me but if you haven't yet ran the upgrade file above to flash to ROM you need to do it the official way and try that. If Wifi is still behaving as in your video do a hard reset and try again (before loading any additional software).
In mine it's empty too but if you go back in after enabling Wifi, theres a MAC address in there. I really don't think your problem has anything to do with the MAC address but if you've tried all of the above and still can't get it working, as you appear to have an official setup, it's time to contact Tech support and get them to go through some checks over the phone with you. Maybe someone else has thoughts on this......
Click to expand...
Click to collapse
andrylim said:
I think i should throw this device or sell it out and buy the new one. Hiks...
Click to expand...
Click to collapse
Doesn't it make sense to at least try what's been suggested first? What have you to loose? The hardware company have no need to know what 'ROM Action' has occurred in the past and who knows what any people you've leant your TyTN II to may have done with it..... They only need to know how it is now and whether it's currently official (ie flashed using the HTC upgrader).
andrylim said:
I think i should throw this device or sell it out and buy the new one. Hiks...
Click to expand...
Click to collapse
I'll give you $50 for it.
The same problem
Im having the same problem... my wi-fi do not turns on! I have flashed this a lot of times, and sometimes works, sometimes dont.
Does anyone have any ideia about this? im stressed becouse i have the same problem... could anyone tellme a good radio in order to try to solve this issue? thanks
Wi-Fi issues
This has worked for me, dont know if its the same case with you or not.
My device was never able to connect to my Wifi n/w at home. If I went to start -> setting -> connections -> Wifi, it would show my home n/w as available, when I tried to connect to it, the status changed from Available to "connecting" then became available again.
In my home n/w I had access type authentication as WEP keys + Mac address filtering. My device was added to the MAC address list so that was not a problem. The issue was access point authentication which was set to WEP keys type authentication on my router. Once I changed from WEP keys to WPA-PSK (data encryption type TKIP) my WM was able to connect to the router.
I have HTC tytn II and its wifi is not searching any other wifi devices or router even in very close range , but wifi is turning on and the green light is also blinking
So, is there a hardware problem?
I did 3.29 hard spl , hard reset ,hard spl 3.34 , but the result is same.
and in network adapters IEEE 802.1b/g goes down and down in the list of network adapters , please HELP.! and sorry for my bad english
try a newer radio
mfsr98 said:
try a newer radio
Click to expand...
Click to collapse
Currently the Radio Version is 1.70.18.02
before this Radio Version I had 1.65.*.*