Related
While updating my (o2 mini s-K-jam-9100) with Aku rom, my ppc's battery get out of charge and updating interrupted.
I tried to power on the device but no answer. I put it to charge and connect to my computer , charging led doesn't light also I could not get into bootloader mode
Try charge it for a few hours with your original wall charger, or look for another (fully charged) battery from someone.
Then try to get it in bootloader mode, if that doesnt work I think you have a really big problem pal.
But another question, when running the RUU upgrade, they warn you that your battery must be at least 50%, didnt you notice that?
upgrade rom MrClean_RUU_WIZARD_2240001a_AKU23_WWE battery %25 bootloader mode impossible
I have a problem with wizard too. While loading rom error appeared and phone became dead (4 steps error message). I can't enter into bootloader mode. Phone takes ~0.11A and blinks while taking off battery. Battery changing and charging didn't help. Resets, manual bootloader mode, waiting for phone to boot... nothing. Totally no reaction. Any suggestion what's going on?
cold-reset to end main battery i wonder?
HELP! ya yardım ya hiçmi anlayan bilen yok yaa?
molski said:
But another question, when running the RUU upgrade, they warn you that your battery must be at least 50%, didnt you notice that?
Click to expand...
Click to collapse
LOL no kidding...the app should really make you check a box or something acknowledging that your battery is fully charged before you can continue. And while they're at it, put a latch on the USB port that won't let the cable go until the update is done. If I ever run into one of those people that yank the cord in the middle of an update and then whine about it, I'll kick his ass. I wonder if they set their clock's alarm, then yank the plug out of the wall and complain the next morning when they're late for work? :lol:
ne diyorlar biri türkçe açıkmala yapsın
Hi all! This is my first post here so, please be nice.
This is regards a t-mobile MDA It is a g3 version.
I was trying to reinstall the 2.26 ROM straight from the t-mobile website. It had gotten to about 90% when a connection error came up. It started the "recovery" process, so I did that perfectly, but then, the bootloader randomly restarts when I plug in the USB. Now, I have been doing a lot of reading on this forum. I have disabled wescomm during install, i have stopped all background programs.
I started again. I got to about 10% of the reinstall, when the bootloader restarted itself..again.
I'm sorta thinking it's the battery, but before i did this reinstall, i let the battery fully charge to 100%. So, i don't know how it could've drained so fast, if that is even the problem. The battery is in good condition. It has about a couple days of stand-by time.
Of course now, i'm stuck in bootloader mode that randomly restarts. Is there anyway of making it stop restarting?
How can I get my MDA back? It seems the programs I've found require activesync and my phone doesn't stay on long enough for any of them to work.
Thanks for all your help. I'm sorry if the answers I need were posted elsewhere, I did do a search, so maybe I have just been using the wrong terms...
I have uploaded a YouTube video if you want to see the restarting for yourself: http://www.youtube.com/watch?v=6h0Sp37N-ZU
-Pam
EDITED: I have removed the SD card also.. still no luck. If the phone is bricked, please just tell it to me...just make it fast...
EDITED: THE PROBLEM IS FIXED!! THANKS FOR ALL YOUR HELP!!
Hi,
This is a battery issue. Everytime you got errors like this, try to recharge it again and redo the flash procedure. I spent a whole day doing it once and it worked!
ok... So, even though the bootloader keeps restarting, it is charging the battery?
thanks!
-pam
Use your wall charger instead of the USB cable to be sure that it's charging.
pammylz said:
EDITED: THE PROBLEM IS FIXED!! THANKS FOR ALL YOUR HELP!!
Click to expand...
Click to collapse
Can we know how you did it? That could be a good help for others
Well, I did what everyone said I should. I did have to jump start the battery, plugging it in did nothing but drain what was left on the battery. So, I read on the forum that a 9V and some twist ties should do it and it did give it some juice to be charged. I had to hunt down the exact wall charger that came with the MDA, because my other wall chargers (for my other phones) didn't charge the phone. But, once I had that all set up, and it was charging because the bootloader screen stayed on the entire time it was charging. So, an hour later I tried the install again, it finally completed. Thank god!
Well, the reason why I wanted to reflash the ROM was because I was having a hard time inputting on the screen, I would tap one place and something a quarter-inch over would be selected. And also, whenever I turned on the wi-fi, the MDA would restart. I tried hard-resetting, and it wasn't helping.. But, now it has been reflashed, everything works great.. except the random, unexplainable restart. :|
Need help myself
I'm having a simular problem with my G3 device.
I wanted to get rid of NBD 8.0 because it constantly was rebooting or simply shutting down. I thought it was the software so downloaded a different ROM.
Before installing this new ROM I (as usual) downgraded before upgrading (installed regular T-mobile ROM). This however didn't go to well. At about 85% it got stuck and reported an error 302. I tried recharging and different ROM's but to no aveill.
I just got of the horn with T-Mobile and they're willing to send me a new battery (free of charge).
At the moment my Wizard is in the wallcharger, none of the 5 or 6 ROM's I've tried have worked, they all stall at one point or other and the bootloader then keeps flashing on and off.
I'm hoping the new battery will work, but I'm interested in that solution you used, what did you do? How did you jumpstart your battery?
Any advise is welcome (concerning this issue of course ) so HELP!?!?!
I have the battery jumpstart solution described here in the top post - http://forum.xda-developers.com/showthread.php?t=321342&page=2. Hope it helps.
Did the battery solution, didn't work, I'm beginning to loose faith. I'm still waiting for the replacement battery from T-Mobile, hope that helps.
EDIT: I GOT MY NEW BATTERY, and everything works again!!!
The batt boost failed so I was without a phone for a while, got everything working again. Thanks for the assistance!
Hello good people,
I've been searching the forums but i don't seem to be able to find a solution for my dead kaiser.
I'll explain the problem:
When i push the power button on my Kaiser, it start's booting the first part, displaying the "smart mobility" slogan by HTC, after a few seconds, some data appears in red, in the right lower corner of the screen, this is what is says:
R 1.27.12.11
G 22.45.88.07H
D 1.56.00.00
After displaying this for a while (about 1 min.) it goes to the Windows Mobile Splash Screen.
After displaying this for a few seconds (5 to 10 secs) it makes the "empty battery" sound and shuts down.
Can someone help me ?
*** And NO, the battery is NOT empty ... i've charged it over night, and the power light was green. ***
I've tried booting with and without SIM and MicroSD cards ... makes no difference.
ttenhag said:
..snip*** And NO, the battery is NOT empty ... i've charged it over night, and the power light was green. ***
I've tried booting with and without SIM and MicroSD cards ... makes no difference.
Click to expand...
Click to collapse
Will it boot with the phone plugged in to power?
Bill
Yeah, try booting with the charger on. Chances are that your battery' life is out..
Reagdrs,
Carty..
I have had the same thing and wondered if it was the battery... except that sometimes it will stay on for about 2 minutes, sometimes half an hour... but most of the time as soon as it goes to the Today screen, I get the battery dead sound and then it turns off. I am going to try to use another battery to see if that makes a difference.
it's not the battery
I've tried with the power cord on the phone, it does 2 things:
1. The same thing as i said before
2. Doesn't boot at all, it halts on the screen where the red data shows up and stays there until you take the power cord off and the battery out.
It does one of these things, randomly.
I've also tried with another battery from my friends kaiser which works perfectly.
So i guess it's not the battery, anyone another idea what it could be?
Might be something wrong with the firmware or anything? problem is, i can't flash it if it doesn't boot can i ??
any ideas ?
Today i managed to get my hands on a brand new kaiser battery, my uncle has a brand new kaiser and i borrowed his battery.
His battery was full, i put it in my kaiser and tried booting, same problem as above.
I've tried with the power cord plugged into the phone, the charging led went on, and i tried booting, same as above.
Later i've tried with the USB cable connected to the phone and the computer, still the same.
I've also tried soft&hard resetting with the new battery, no succes.
So therefore, i believe it's not a battery or a power problem, it must be firmware corrupted or something of the hardware broke ?
Does anyone has any idea how i can try to re-flash this thing ? to find out if that might be the problem ?
It's not the battery. Could be a bad flash or something. Try to reflash it. Yes, it will reflash even though it won't "boot" as you say. Try to reflash and then report back. Remove the memory card for now.
Also, what Rom and SPL are you using?
Ur going to have to force it into the bootloader to flash it, no biggie. Just hold down the power and camera buttons, and hold the soft reset button with the stylus, untill you get the tri color boot screen. Then flash away! I would flash a stock rom until u can tell weather your problem is hardware related or not. If hardware related keep the stock rom and spl, and try to warrenty return it.
O.k., this just happened to my Brand New kaiser last night too, WTF! Was running fine when the low battery icon came up with half battery life n shut down, now it wont start up at home screen for more than 3 secs before it shuts down and says the battery is dead even while its plugged in! There's no way to reflash or hard reset since it doesn't stay on long enough to do so. Just ordered my replacement, but reading different forums, it seems many people have experienced this with Kaiser and most around the same time, again, WTF!!!
kaalgoosy said:
O.k., this just happened to my Brand New kaiser last night too, WTF! Was running fine when the low battery icon came up with half battery life n shut down, now it wont start up at home screen for more than 3 secs before it shuts down and says the battery is dead even while its plugged in! There's no way to reflash or hard reset since it doesn't stay on long enough to do so. Just ordered my replacement, but reading different forums, it seems many people have experienced this with Kaiser and most around the same time, again, WTF!!!
Click to expand...
Click to collapse
Does it power off while beeing in bootloader? You doesnt have to start the device up to get into bootloader you know. Try checking if it shuts down while beeing in bootloader, if its not just reflash. Another thing, what spl and rom are you guys having this problem using?
It's alive!!!
Finally got it to bootloader mode before it dies and reflashed and it seems to be running just fine now. Using spl ver.1 with schaps 4.30 wm 6 (although users running the stock rom had the same experience). Got the "smart chip not provisioned mm 2" message most likely from at&t killing my sim card from a reorder as they did when I Returned the Iphone which is a rediculous policy(policing); having to constantly contact at&t to update to a new sim. Still, it makes me wonder what caused this defunct in the first place, and if it'll happen again tomorrow or the next day. Reflashing and reinstalling cabs is a Real *****, especially for a pda where people use their device for business and gather a collection of missed calls and lost connections when the Os decides to randomly crash. As much as I dig htc's devices, it's kinda strange how HTC, with such a huge marketshare with pda's, is so quiet about updates or firmware fixes. Anyways, long live the only source for htc fixes, XDA!!
Mine is still completely in the state in which i got it.
Just the stock HTC Firmware, rom's and loaders
Okay, a little update.
How the hell can i flash this thing if it keeps on bugging me with the "Wrong vender ID" message when i try to flash it ?
I know, install HardSPL ... but how can i ? without a possibility to connect ActiveSync?, you'll have to start the device for that and run activesync, but i can't because it won't even boot.
Is there any other way of getting this device to allow me to flash without needing to boot it up fully.
I have no problems getting in to the Tri-Color bootloader, but no further.
When updating it gets to 1%, then my PC gives the message: "Wrong vender ID, please use your own device's update utility" and the phone stays at 1% till i rip out the battery.
ok guys I have the same problem with two of my kaiser's
I can power them up but in aproximately 1 minut goes off, no matter if the charger is plugged or not, it doesn't make a difference
I can put the phone in tri-color screen and stays there with no problem
and I can flash them with no problem because they are olipro already
but after flash them with anything still the same problem ???
so if anybody has a clue or maybe a rom to fix this would be great
thanks
best regards
linterna
One more thing. I have the same problem but mine when starts flashes Blue LED when was good hasn't. I Started few times and it works for 2-3 weeks and again. Best to do is to not use camera. Every time it happends i ise my camera and battery was middle-low. I think its some problem with camera. Many times it don't want to start up or saids that there is no memory for saving photo. Maybe i should flash rom from wersion without cameras.
im having the same problem, has anyone solved this?
Yeah solve . HTC as a kids toy .
Buy Nokia! Or SonyEricsson.
I won't buy smartphone ever again.
Does not boot to the OS
I have the similar problem...... My kaiser is dead not even booting with battery only (not plugged to the PC or external charger).
However when I plugged it to the power source it boots up and continue to the OS and boom (shuts off) in split of second.
I tried different flash and it propelry boots and got windows up and running when plugged to the PC with the old ATT test ROM which I got from the xda threads.
But with the latest roms it wont boot to the windows , it dies before that.
Anyone having idea what could resolve this.
any update on this? i am having the same problem. i tried a hard reset already with no success it goes to the splash screen and says "the device is clearing the storage. please wait" then pings and turns off
r 1.65.21.18
g 25.88.40.05h
d 3.57.00.00
my phone is completely stock and has never been unlocked or messed with. found an updated at&t rom, i ran it and none of the numbers change in the bootup, then goes to the splash screen and says again "the device is clearinng the storage. please wait" and then pings and turns off.
also i have been searching for the oilpro or jockeyw hard spl files on google and on here but have found nothing, the search function doesnt seem to be able to find much.
any help would be appreciative, thanks in advance
Don't mean to hijack but didn't want to make my own thread when this one was here. I'm not having exactly the same problem as everyone else but I am having a battery issue. It works fine and says it's charging when plugged in but when I unplug it the battery goes down fast (like 1-4 % a minute) and when it hits around 70%, it shuts off. Then whenever I turn it on, it immediately shuts down before the Today screen fully shows (like others are mentioning here). I have to plug it back into the charger to get it to turn on again.
Could this be a bad flash too..? I know I did one of the latest HardSPLs and tonight I just now updated to the latest stock AT&T ROM. But it can't be a flash because the night I got it (bought it used on eBay), I was playing with it not plugged in using Skype and it shut off on me. I didn't think much of it and had always had it plugged in since then.
I'm assuming I simply need a new battery.. I've emailed the original owner and she says she never had any problems with it like this.
Zerxer said:
Don't mean to hijack but didn't want to make my own thread when this one was here. I'm not having exactly the same problem as everyone else but I am having a battery issue. It works fine and says it's charging when plugged in but when I unplug it the battery goes down fast (like 1-4 % a minute) and when it hits around 70%, it shuts off. Then whenever I turn it on, it immediately shuts down before the Today screen fully shows (like others are mentioning here). I have to plug it back into the charger to get it to turn on again.
Could this be a bad flash too..? I know I did one of the latest HardSPLs and tonight I just now updated to the latest stock AT&T ROM. But it can't be a flash because the night I got it (bought it used on eBay), I was playing with it not plugged in using Skype and it shut off on me. I didn't think much of it and had always had it plugged in since then.
I'm assuming I simply need a new battery.. I've emailed the original owner and she says she never had any problems with it like this.
Click to expand...
Click to collapse
I've just started having the same problem as you. Very annoying. Mine phone is a year and a half old now, so i'm assuming the battery is coming to an end.
Charge battery, will last a while, but goes down to around 80-70% and then it says plug power in blah blah blah and dies. Then when you charge it, it stays on one or 2 bars for a bit and then jumps to 100% fully charged.
Saw a procedure to "reset" the battery. Supposedly have to take the battery out for a bit then plug in and charge fully over night with the phone OFF. None of this seemed to work for me... I'm due for an upgrade in January, so is it really worth paying for a new battery... hmmm
I was flashing my phone repeatedly last night. I've read the forums and have done about 4 successful flashes already. The problem is, I've found a WM6 rom for the Wizard that I wanted better than the ROM already inside my phone, and I proceeded to flash it. But I left the computer and phone by itself so that I could rest a bit (I've spent hours in front of the computer flashing my phone), and fell asleep. When I woke up, I noticed that the flashing failed, and it was at the tri-color screen. Then, it died on me. No battery, obviously, being stuck at the tri-color screen the whole night. Now, it doesn't charge or turn on. I know I just need a battery to run the phone. But where I'm from, batteries for the Cingular 8125 are rare, and I'm one of the few that has an 8125.
I don't know anyone who has a battery for the 8125, and there's nowhere to buy from here. Any recommendations?
First of all be sure that you haven't flashed a G4 ROM in a G3 device (or vice-versa) which would have made it a brick.
In case you haven't screwed up the bootloaders then look for the battery jump start thread that teaches how to revive a dead battery
good luck
ianestradalives said:
I was flashing my phone repeatedly last night. I've read the forums and have done about 4 successful flashes already. The problem is, I've found a WM6 rom for the Wizard that I wanted better than the ROM already inside my phone, and I proceeded to flash it. But I left the computer and phone by itself so that I could rest a bit (I've spent hours in front of the computer flashing my phone), and fell asleep. When I woke up, I noticed that the flashing failed, and it was at the tri-color screen. Then, it died on me. No battery, obviously, being stuck at the tri-color screen the whole night. Now, it doesn't charge or turn on. I know I just need a battery to run the phone. But where I'm from, batteries for the Cingular 8125 are rare, and I'm one of the few that has an 8125.
I don't know anyone who has a battery for the 8125, and there's nowhere to buy from here. Any recommendations?
Click to expand...
Click to collapse
First os all your Wizard is not a brick. To revive your battery try using a wall charger to charge you battery, or you can leave it attahed to a wall charger for some time and it should start charging after 10-15 mins (becoz one i got a dead battery and did the same) Once the battery is revived then flash it to a Official ROM, afterwards any custom ROMs or what so ever. I hope i helped. TC
i've the same problem!!! i leave the phone attached the whole night to the charger...but it was in bootmode, so it doesn't charge!!! it hasn't the power to flash my phone...when it arrives to the 85% (when the phone write into the flash memory) it reboots.....what must i do? i tried to jump start...with a 12v adapter...but nothing....
It won't charge in Bootloaders,as it doesn't provide any charging circuit .The phone must have and boot up to a working OS (Windows) to start charging,only then it has a charging circuit.
Try to get a fully charged batter ,may be borrow it from a friend or try to charge your battery with friends phone,flash a rom and only it'll start to charge.
i know....but...i have not a friend with a ppc like mine!!!! and even if i'll buy a new battery....how can i charge it????? a friend of mine has a qtek 9000....but the battery is different from mine.......
F0ll3 said:
i know....but...i have not a friend with a ppc like mine!!!! and even if i'll buy a new battery....how can i charge it????? a friend of mine has a qtek 9000....but the battery is different from mine.......
Click to expand...
Click to collapse
No need to buy a battery i say you use a External Battery Charger. Because even buying it would be cheaper then the battery itself and would help you in future too. I hope i helped. TC
Thanks
xda2_haseeb said:
First os all your Wizard is not a brick. To revive your battery try using a wall charger to charge you battery, or you can leave it attahed to a wall charger for some time and it should start charging after 10-15 mins (becoz one i got a dead battery and did the same) Once the battery is revived then flash it to a Official ROM, afterwards any custom ROMs or what so ever. I hope i helped. TC
Click to expand...
Click to collapse
Thanks, dude. I never even tried charging it with the wall charger. There seems to be other people that have the same problem as I do. Now my phone is up at the tri-color screen, and I'm charging it, then Ill start flashing again. Thanks again!
No Problem but now remember if you find ppl with same problem (on the forum) dont forget to guide them to this Thread. And no need for the thanks. TC
zabardast_1 said:
It won't charge in Bootloaders,as it doesn't provide any charging circuit .The phone must have and boot up to a working OS (Windows) to start charging,only then it has a charging circuit.
Try to get a fully charged batter ,may be borrow it from a friend or try to charge your battery with friends phone,flash a rom and only it'll start to charge.
Click to expand...
Click to collapse
Thanks, dude. I never even tried charging it with the wall charger. There seems to be other people that have the same problem as I do. Now my phone is up at the tri-color screen, and I'm charging it, then Ill start flashing again. Thanks again!
Click to expand...
Click to collapse
@ianestradalives's as zabardast_1's has said, your phone WILL NOT CHARGE unless windows Boots. Either buy a new battery or find someone with the same phone or an Orbit(as they use the same battery) also if you buy a new battery it generally arrives with enough charge to use for flashing(It did for me anyway). The only other way to do it would be to buy a dock with a second battery charging slot. Using the wall charger wont do anything except stop it from restarting ,while its plugged in.
@XDA2_haseeb why point people who have the same problem to this thread, if the answer you have given is incorrect?
scousemartin said:
@ianestradalives's as zabardast_1's has said, your phone WILL NOT CHARGE unless windows Boots. Either buy a new battery or find someone with the same phone or an Orbit(as they use the same battery) also if you buy a new battery it generally arrives with enough charge to use for flashing(It did for me anyway). The only other way to do it would be to buy a dock with a second battery charging slot. Using the wall charger wont do anything except stop it from restarting ,while its plugged in.
@XDA2_haseeb why point people who have the same problem to this thread, if the answer you have given is incorrect?
Click to expand...
Click to collapse
Dude, sorry to disappoint you, but his advice was correct. My phone is now up and running, and it has NBD 9.2. The advice he has given is correct. It works.
Ok,was your phone in Bootloaders (muliticolor screen) or with a working OS installed on it when you charged with a wall charger ?
That's exactly what was i was about to ask Zabardast_1
As there is no way he could charge his phone while it is in bootloader mode. He either had battery power already in it and messed up the flash or you have just been lucky when you took the battery out of the unit and reinserted it and there was enough power left to flash
zabardast_1 said:
Ok,was your phone in Bootloaders (muliticolor screen) or with a working OS installed on it when you charged with a wall charger ?
Click to expand...
Click to collapse
In bootloader screen. If you were flashing a rom and it failed, you usually end up in the tri-color (aka "Bootloader") screen. Do what haseeb said (like I did) and plug your wizard to a wall charger and wait for a few minutes. When I plugged mine, it immediately lit up. Good hunting!
scousemartin said:
That's exactly what was i was about to ask Zabardast_1
As there is no way he could charge his phone while it is in bootloader mode. He either had battery power already in it and messed up the flash or you have just been lucky when you took the battery out of the unit and reinserted it and there was enough power left to flash
Click to expand...
Click to collapse
Nope. I'm sure the battery was drained. The other night, my phone was in the bootloader screen THE WHOLE NIGHT. And yesterday, I tried reflashing, but it won't start anymore because of - obviously - no battery power.
IF you don't believe me, fail a flash and drain the battery. Then plug it into the wall. It really works.
scousemartin
YUP! thats very true.
The question here is 'How did he charge in Bootloaders with a wall charger',it has to have a working OS on it to start the charging circuit,which isn't present while in Bootloaders.
Flashing is a separate issue.
it will light up as it has power but it WONT CHARGE IT. You were LUCKY that's all and you had power in your battery. You just never realised it. If you want to prove us wrong let the battery go low and then try your revival attempt again. I guarantee you will be buying another battery or charging it somewhere else
also i have been through this personally with my xda mini-s and the only remedy was to buy another battery (or recharge it). You could leave your phone connected to the wall charger for a week and it wont make a blind bit of difference to the battery level. I know because i tried.
Anyway glad you got it sorted ,but the solution to your problem was not charging the phone. Thats all i have to say on this matter now
scousemartin said:
also i have been through this personally with my xda mini-s and the only remedy was to buy another battery (or recharge it). You could leave your phone connected to the wall charger for a week and it wont make a blind bit of difference to the battery level. I know because i tried.
Anyway glad you got it sorted ,but the solution to your problem was not charging the phone. Thats all i have to say on this matter now
Click to expand...
Click to collapse
It did get sorted. But I am really sure about the battery thing. I guess this is an anomaly. Besides, the XDA is different from a Wizard.
lol the xda mini-s is exactly the same device a 8125 is, they re both wizards
Hi,
Some weeks ago, after flashing/testing my cooked rom & using Task29, my TP2 was stucked on the 1st logo screen and I desesperately tried to flash a rom either using the sd card/bootloader method but it remains on 0%.
After many many tries, I was finally able to flash roms again but yesterday when I used Task29, I noticed that the progress bar flashed from 0-100% in less than 5seconds (It was very fast which is not normal). Usually this process takes at least some 20seconds to complete. After that, my phone is again stucked at the 1st logo screen.
Edit for update : Phone is working again! Don't know how but it just flashed today!! I think I have tried at least 70-100 times before it decides to start flashing!!
It's normal that task29 is a lot quicker than a regular ROM flash. Also, after the task29, it's normal that the phone hangs on the startup screen, because it hasn't got a ROM to load any more. What you need to do is put it into the bootloader (hold down the Volume Down button and press reset), wait till it comes up and says "Serial" on the tri-coloured screen, then plug into the PC and that should change to "USB".
Then you should be able to go ahead and flash a ROM. I presume you have HardSPL ? (I guess so, or task29 wouldn't have worked).
thanks for the reply. Yes, indeed I know the process of task29 since I have been flashing a lot of times. The fact is that the last time I did the task29, the progress bar completed in a flash (i mean, it jumped from 0% to 100% faster than usual). And since that, phone is stucked again at the logo screen. The last time I got this problem, I had tried to flash numerous times for 2 full weeks before the phone finally flashes a rom. Is it that task29 screwed the phone's memory/bootloader? Forgot to mention that it is a Vodaphone UK Rhod100 model.
Ah ok, sorry for misunderstanding.
I wonder if something odd has happened to your HardSPL. Is it still showing "0.85OliNex" ? I wonder if re-doing HardSPL might help ?
steviewevie said:
Ah ok, sorry for misunderstanding.
I wonder if something odd has happened to your HardSPL. Is it still showing "0.85OliNex" ? I wonder if re-doing HardSPL might help ?
Click to expand...
Click to collapse
Yes, it's still on Olinex hardspl - can't re-do the hardspl since everything I tried is stucked at 0%.
What was the last thing that happened when the phone was still working ? You mentioned that you were testing a cooked ROM, is that your own cooked ROM ? Are you sure you haven't bricked your phone ?
Well, the problem started right after using task29 yesterday night - so the rom is not at fault because I flashed the same rom many times before. Phone also was working fine (never dropped or no damages - still in mint condition). What do you mean by "bricked your phone"?
What I was wondering is whether you cooked your own ROM yourself, and this is somehow responsible for the current state of your phone (e.g. by cooking in something damaging to the phone). But it sounds like this isn't the case.
Previously, some people have reported problems like this when there's a USB problem. Have you tried a different USB cable, just to see if that helps ? Or looking very closely at the pins of the USB connector on the phone to see if they could be damaged ?
You mention that flashing by SD card doesn't seem to work either. Have you had that working ok before ? Because sometimes it can be sensitive to the make of SD card, as well as how it's formatted.
thanks for the advices, steviewevie. I really appreciate All the usb pins seems to be in good condition and yes, I've tried 3 different usb cables but to no avail. If there were a problem with the pins, I believe that the phone would have problems to sync with the computer and I did not encounter this situation in the past. I assume the usb is ok.
As for the cards, I have only used Transcend ones formatted to Fat32 - never tried to flash using sd before until I got this problem.
Try searching for some details on the "mtty" tool. It might be that you can use that to help - mtty gives you some commands you can use to the bootloader.
Already tried the commands from "The DEFINITIVE MTTY Thread!!" before and phone is still stucked. Anyone can help please??
Please help me too!!
I do task29 when it finished it's show 1st boot screen,Then i pull the battery out.(Finished Every process of Task29)
1 hour later,I want to flash new rom.I try to enter bootloader,it can't and i try to turn on my Rhodium too.I think that battery out of power then i go to charge it.
3-5 minutes it's wake and show 1st boot screen and turnoff itself.again and again.
Is it bricked yet?
thanks
ravenholm said:
Please help me too!!
I do task29 when it finished it's show 1st boot screen,Then i pull the battery out.(Finished Every process of Task29)
1 hour later,I want to flash new rom.I try to enter bootloader,it can't and i try to turn on my Rhodium too.I think that battery out of power then i go to charge it.
3-5 minutes it's wake and show 1st boot screen and turnoff itself.again and again.
Is it bricked yet?
thanks
Click to expand...
Click to collapse
What happens if you just leave it charging for some time, is the charge light coming on ?
ravenholm said:
Please help me too!!
I do task29 when it finished it's show 1st boot screen,Then i pull the battery out.(Finished Every process of Task29)
1 hour later,I want to flash new rom.I try to enter bootloader,it can't and i try to turn on my Rhodium too.I think that battery out of power then i go to charge it.
3-5 minutes it's wake and show 1st boot screen and turnoff itself.again and again.
Is it bricked yet?
thanks
Click to expand...
Click to collapse
sounds to me that it could be the battery is out of power. Maybe try to leave the battery in with the power cable for a short period of time and see if you can turn it on and flash the rom.
yes,the charge light is on.but 3-5 minutes of charging.it's wake and show 1st boot screen and turnoff itself.again and again too.
Before i do task 29 battery has 46 %.i think the battery left power about 30%.
ravenholm said:
yes,the charge light is on.but 3-5 minutes of charging.it's wake and show 1st boot screen and turnoff itself.again and again too.
Before i do task 29 battery has 46 %.i think the battery left power about 30%.
Click to expand...
Click to collapse
Thats definitely a issue with the battery, Not enough power is getting to your battery maybe after a bad flash or something you did wrong.
I seen a similar issue when my battery was dead and I tried charging it via usb the device would turn on then loop n turn itself off . 5, 10 mins later it did the same thing. . .
Is my battery dead yet?
If i buy a new one,Does it work? Or How to fix this problem?
Thanks in advance
ravenholm said:
Is my battery dead yet?
If i buy a new one,Does it work? Or How to fix this problem?
Thanks in advance
Click to expand...
Click to collapse
Do you know anyone with the same phone as you that could charge your battery ? Otherwise you might need to buy another battery. I would have *thought* that a new battery would be charged, but this is only a guess, and it might depend where you buy it from. I don't suppose you have a lot of options though.
ravenholm said:
Please help me too!!
I do task29 when it finished it's show 1st boot screen,Then i pull the battery out.(Finished Every process of Task29)
1 hour later,I want to flash new rom.I try to enter bootloader,it can't and i try to turn on my Rhodium too.I think that battery out of power then i go to charge it.
3-5 minutes it's wake and show 1st boot screen and turnoff itself.again and again.
Is it bricked yet?
thanks
Click to expand...
Click to collapse
By the first boot screen you mean the HTC screen? Then you did something wrong. Then it's normal that the phone would reboot or turn itself off.
Are you sure you try entering the bootloader the right way? Keep volume down + power on button pressed until you see the bootloader. I mean really keep them pressed until the bootloader shows up.
I can't enter to bootloader and I can't turn on my phone without charger.
**CAN'T USE USB CHARGER TO ENTER BOOTLOADER TOO
That i told from last post i charge my phone and 3-5 minutes it's show 1st boot screen [HTC] and turnoff itself.I charge it for 6 hours then i try to turn it on,it can't.it like battery out of power.I think my battery is dead
Thanks all reply XD