Hi,
After my holiday i started my MDA and it didn't start anymore.
So after one night loading, the oranje battery loading led was green again and the phone started until the IPL/SPL boot screen. (i can see the backlight getting a bit weaker as a last action)
I was using the XDA Mobile 6 wich was working perfectly for 2 month's.
I can start the colored Bootloading screen by using the camera button and i have just tried three different ROM's. Including the "button"ROM and the T-Mobile 2.26 ROM.
They are all flashed successfully but when i start the MDA they all stop loading after the IPL/SPL/GSM/OS boot screen.
What is the cause of this? Is there a solution? what can i Try to do?
PS. The battery is a new one and is just 3 month's old and should give enough power I assume)
Please Help.
If the phone is CID unlocked then try this solution
http://forum.xda-developers.com/showthread.php?t=276963
The Phone is Cid Unlocked and I have tried the solution mentioned but it didn't solve the problem.. (Though I was able to backup the ROM to a SD card and to restore it again)
But it still doesn't go further then the IPL/SLP bootscreen.
Can it be a hardware problem?
Same Problem
I got exactly the same problem just today. Have you figured out how to solve it?
Many Thanks
Related
I was upgrading my MDA using the official mda update 2.26 and then the phone completely froze. When I soft-resetted the phone, it wont get off the T-Mobile load screen. I tried to hard-reset it using the voice+commanager to reset, but then it just goes back to the T-Mobile load screen. Can anyone help me? I also tried to flash the Wizard_Love on the 3 color screen but it keeps giving me error 200. Please I need your help.
wow no response to such a serous problem. I'm having the same issue I down loading and install to my storage card some files gps navi apps from the ppc freeware site. while trying the apps my device froze. I held down the power button and it didn't respond so I removed battery.but device won't lad pass the second start up screen. what do I do
collwatt said:
wow no response to such a serous problem. I'm having the same issue I down loading and install to my storage card some files gps navi apps from the ppc freeware site. while trying the apps my device froze. I held down the power button and it didn't respond so I removed battery.but device won't lad pass the second start up screen. what do I do
Click to expand...
Click to collapse
Remove the sdcard/minisd and do a hard reset.
Bricked?
Hi all,
i have similar problem like Lo0o0nG.
Tried to flash wm6 on my g3 wizard following the wiki:
Flashed the Button ROM "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM" but after rebooting the wizard stucks in the first screen with the beer glass on it - showing IPL 1.01, SPL 2.21, GSM 01.12.10 and OS 1.5.4.2.
Then nothing else happens...
Did this 6 or 7 times before with g3 and g4 phones - worked perfectly till now..
Are there any suggestions / any possibility to get my phone working again?
thx,
derHarry
If the phone is CID unlocked use the SD/mtty method to restore the full ROM image.
If it's not CID unlocked then try to unlock it with WST and reflash the ROM(s)
Thank you for your fast reply!
It's not CID unlocked, but WST can't connect to the device...
any other suggestions?
I'm sorry but WST can't connect unless the OS has booted already. I didn't realize it when answering.
I guess the only solution now is to use the commercial unlocking solution by IMEIcheck.co.uk
Thank you for your suggestions,
i think i'll replace the touchscreen from this bricked device with the broken one from my other device... so it's not that tragical
btw: how could this happen? did i something wrong while flashing?
derHarry said:
Thank you for your suggestions,
i think i'll replace the touchscreen from this bricked device with the broken one from my other device... so it's not that tragical
btw: how could this happen? did i something wrong while flashing?
Click to expand...
Click to collapse
Yes. I believe you flashed a ROM without permission (CID unlocking) or an upgrade went wrong (stopped before finishinfg) and now the bootloader 1.xx can't load the OS because the 2.xx address is different and can't be found.
cheers
Hi all,
I have been visiting these forums for 2 years now and have downloaded some great tools and ROMs to enhance my Trinity, however something all of a sudden has gone very wrong!
I upgraded to WM6.1 Elegance edition about 3/4 months ago, CID unlocked the phone about a month ago and everything has been working like a dream.
However just today, I attempted to turn the volume down on my phone during a meeting (I always forget to normally!) and there was no display. After few battery resets, again no display. It starts up, loads the the Elegance splash screens and then hangs on the screen before when the OS should appear.
My decision was to flash the ROM again. I cant flash using Activesync as it wont pick up on the hung screen, so I started the bootloader and got as far as 1% of the flash and it will restart. So I tried the SD Card method when resulted in a "loading" screen appearing for a few seconds and then it goes back to the standard bootloader and displayed a 00068002 error.
I am out of ideas, I hear mtty.exe is a good program for this kind of thing, but what I want to know is if this is fixable or if I should give up!
I have been working on this since 2pm today none stop!
Can any of you guys give me any suggestions please?!?!?
Kind regards,
Jonathan
Should be a cinch
Did you SPL the Phone before flashing roms?
If you put the phone into the bootloader mode The RGB screen and kill of activesync you should be able to run one of the flash update programs.
If I have flashing problems its usually Active sync so I kill it then run the flash program.
I've got a sneaky suspision your battery might be causing the problem.
Hi there, thanks for the reply. As I was new to upgrading I havent used SPL on the phone before flashing the ROMS. I did use an unlock tool recently as i wanted to try a different network SIM to see if it worked when I was in South America, so the phone is unlocked to all networks. Are you saying if I SPL now it should sort the problem out? If so how do I do this withour ActiveSync working - can you use SD?
Another thing I failed to mention was that when I start an upgrade and it follows all the steps, it doesnt say the current ROM on the screen where you press update ROM. It just gives the name of the new ROM and the current one is left blank.
I have disabled Active Sync before attempting the update. It seems to go through fine and then the phone restarts wafter 1% of the update.
What makes you think it is the battery? I am happy to spend under 20 pound on ebay if you think it will fix the issue!
try unbrick.bat.......my trinity was also stuck.......unbrick.bat save my day....
The same happened to me several time....I could not find a solution other than this one:
1. Flash the official HTC ROM.
2. Flash the required ROM then.
it works for my TrinTy.
I tripped over my usb cable while flashing an official orange rom + radio version a few months ago, and bricked my trinity. Left it on a shelf for ages & decided to try to revive it a few days ago.
The problem was that the thing kept hanging after the splash screen, all the backlights would go on and it would hang. I managed to splxploit it to get hardspl back on there (olipro 1.3) & successfully flashed a few OS roms from here but it still hung on the (now different) splash screen. Realised that the 'No GSM' thing was a killer, so tried reflashing a few radio versions, and that worked fine as far as the flash was concerned through USB / HSPL.
However, it still says 'No GSM' and hangs at boot. Any ideas? I've run all the tasks from mtty with spl-1.30lipro, the CID shows the HTC SuperCID(hex) etc successfuly, and it formats the OS portion successfuly. Task 2a, like with others, just returns a new prompt after a second or so.
I've got radio 1.56.70.11 on there apparently. It still says 'No GSM', although this goes away a lot quicker now, whereas before it would hang with that on the screen...
Help?? Should I throw it in the bin?
Thanks a lot, any help is much appreciated...
Nik
you've killed the radio BL in that case, bad timing on your part, sadly it's unrecoverable.
the only fix is desoldering the radio chip and soldering a new one in.
Have you tried whith the version 1.20? The version 1.30 gives some trouble flashing the radio
same problem...no way for me in this moment!
do you solve?
flash with hard-spl 1.20 ou crash'n'proof... then try again... it works with me
serbington said:
I tripped over my usb cable while flashing an official orange rom + radio version a few months ago, and bricked my trinity. Left it on a shelf for ages & decided to try to revive it a few days ago.
The problem was that the thing kept hanging after the splash screen, all the backlights would go on and it would hang. I managed to splxploit it to get hardspl back on there (olipro 1.3) & successfully flashed a few OS roms from here but it still hung on the (now different) splash screen. Realised that the 'No GSM' thing was a killer, so tried reflashing a few radio versions, and that worked fine as far as the flash was concerned through USB / HSPL.
However, it still says 'No GSM' and hangs at boot. Any ideas? I've run all the tasks from mtty with spl-1.30lipro, the CID shows the HTC SuperCID(hex) etc successfuly, and it formats the OS portion successfuly. Task 2a, like with others, just returns a new prompt after a second or so.
I've got radio 1.56.70.11 on there apparently. It still says 'No GSM', although this goes away a lot quicker now, whereas before it would hang with that on the screen...
Help?? Should I throw it in the bin?
Thanks a lot, any help is much appreciated...
Nik
Click to expand...
Click to collapse
Definately, don't throw it away. It's still worth $$$. A lot of people can use it for parts if you don't get it working. Offer it up for sale on here if that's the case.
Olipro said:
you've killed the radio BL in that case, bad timing on your part, sadly it's unrecoverable.
the only fix is desoldering the radio chip and soldering a new one in.
Click to expand...
Click to collapse
hi you know radio bl? any schematic to know.. im curios whats does it look like,?
Hi!
this is my first post here, so sorry for my bad english or mistakes
i bought a qtek 9100 on ebay, and i'm wondering if it's a brick or not. i received the device 3 days ago. during this time i read through a LOT of threads here, tried a few things and nothing works.
here is some info:
- the phone is a qtek 9100 without branding
- the IPL is now 1.01 (i flashed "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE" successfully)
- the SPL is 2.18 (because of the missing suffix ".0001" i guess it's a G3)
- GSM is 01.12.10
- OS is 1.5.4.2
- when i start the device (without any button pressed) it stops at the splash screen (which was a qtek logo before flashing, and is now this picture with a beer, that says "some things last forever" )
- i can get into bootloader screen (color screen) by holding camera button while starting
- in bootloader screen a small "USB" appears when i connect cable to usb on pc
- when i press communicate and voice buttons (on the sides) while starting, the "Press send to restore factory default" screen appears, but pressing send prints out "Format FAT Partition Format is Failed"
- the device gets recognized by windows ("Mobile Device" appears on my computer)
- ActiveSync 4.5 does not connect to device, not even as guest.
- when i hit "Connect..." in ActiveSync's connection settings, nothing is found
("Allow USB Connections" is ON)
- the device is CID-locked ("FF" state in Mtty 1.42)
- i can't unlock CID, because i can't get "EnableRapi.cab" onto the device without ActiveSync connection
Ok, these are basically the things i know now. The problem is that i never saw any other screen then the "HTC" boot screen, the "Qtek" splash logo (the one with the clouds) before i flashed with custom ruu wwe, after that i see the new splash logo, and i can get into bootloader (color) screen. I never saw any windows mobile running on this device! I could never establish a connection with ActiveSync!
So i hope that someone here on this nice forum can help me get this device to work (WM5 would even be enough right now) or at least give me a hint!
Thanks in advance!
Put the phone in bootloader mode and flash back to the original ROM.
since i bought it in ebay i don't have the original rom of this device.
but i found "233309-qtek9100_2180707_21807109_20710_qtek_ger_ship.exe" through google, which seems to be an original qtek rom (version 2.18). shall i flash this one?
You can find in the Wiki the latest official roms of every brand for our Wizards .-
ok, thanks.
i found one (Qtek GER 2.18.7) and flashed it. the process was successfull, now the IPL/SPL is both 2.18 . But the device still doesn't start and stops at the splash screen (which is now the original qtek splash again). I can still get into bootloader mode and hard reset results in "Format is failed"! No ActiveSync connection either... how should i proceed now?
i basically narrowed it down to these two problems:
- the splash screen freezes
- hard reset error "Format is failed"
( IPL: 2.18, SPL: 2.18 )
can't anybody help please?
i'm freaking out about this
With everything i’ve read the only people who’ve had any success had CID unlocked devices.
ok, i think that too for what i've read so far...
is there any other way of CID unlocking except lokiwiz (can't copy enablerapi.cab without activesync!)?
would this imei-check service that i've read about work in this case?
meanwhile i've also tried something with mtty (r2sd all) but doesn't work -> "didn't get proper security level"
is this also because of the CID lock? i tried to find out the right password to enter in mtty, but found nothing that worked...
does anybody know the correct password?
I couldent CID unluck my 9100 with lokiwiz so i did it 5min ago with Wizard Service Tool (ha to reboot my computer).
I'm having the exact same problem,
except I can't flash any other ROMS so I'm stuck looking at this incredibly frustrating beer picture, with "some things last forever".
Does anyone have any further ideas?
Look up the orignal rom on the wiki, get into bootloader. And flash it back.
Jodda said:
I'm having the exact same problem,
except I can't flash any other ROMS so I'm stuck looking at this incredibly frustrating beer picture, with "some things last forever".
Does anyone have any further ideas?
Click to expand...
Click to collapse
Jodda said:
I'm having the exact same problem,
except I can't flash any other ROMS so I'm stuck looking at this incredibly frustrating beer picture, with "some things last forever".
Does anyone have any further ideas?
Click to expand...
Click to collapse
Hi Friend!
I have the same problem with my Qtek9100!
Any ideas? have you solved your problem?
I have the frustrating beer picture
Please help me.
Very Thanks
Like I sad before
Get into bootloader, flash back the original rom and try again.
mizobuchi said:
Hi Friend!
I have the same problem with my Qtek9100!
Any ideas? have you solved your problem?
I have the frustrating beer picture
Please help me.
Very Thanks
Click to expand...
Click to collapse
I put the original rom.
But... the problem is the same.
when I started the device (without any button pressed) it stops at the splash screen (which has a qtek logo before flashing)
- i can get into bootloader screen (color screen) by holding camera button while starting, I installed the original and others rom who days before works perfectly... Now... this stopped at splash screen
- when I tryed to format.. = "Format FAT Partition Format is Failed"
Any idea?
I have tried this : http://forum.gsmhosting.com/vbb/showthread.php?t=332143
but... without success.
Could you help me, please?
Very Thanks
i'm still stuck with the same problem with hang up on qtek splash screen, too!
i have IPL 2.18 and SPL 2.18 and i can get in boot loader screen and connect with usb. (but no activesync connection!)
formatting doesn't work either.
does anybody have an idea how to solve this?? it's frustrating... i've tried almost every guide here on the forums.
same proplem here with
ipl 2.16
and spl 2.16
I used this to fix this problem
Hi i had the same problem the other week, installed a dodgy app, went to do a hard reset and wouldn't do a hard reset format failed. Tried updating rom everything worked ok until you booted it up. Wouldn't go past second splash sreen. After a few hours of trawling round i found this thread.
http://forum.xda-developers.com/showthread.php?t=276963&highlight=format+is+failed
worked for me. Hope this helps you out.
Problem in connecting to my PC
Hey ,
I just bought a qtek 9100 a day before ... I tried to connect it with my computer.. instead of connecting my battery gets charging well can u plz help me out !
is there any software that i should install in my pc in order to get it connected to my PC...... please help me fast ! Lot of work is pending !
Thanks
Salman
Ok guys, I finally have this SOLVED.
My QTEK 9100 is working fine now!!!
I'm so happy with it right now
Since nothing I tried worked, I went to imei-check.co.uk and got my phone completly unlocked! It only cost me about 11€ and since it works now I have to admit that it was worth it (no advertising). After the unlocking was done I could do the "r2sd all"-method (Tool: MTTY 1.42) using a miniSD card. You can find a good tutorial on this board somewhere. After that everything was just fine...
-> I never saw it working and Hell Yeah: This baby just kicks a$$ !!! (although it's kinda 'oldschool' these days )
My HTC Diamond have some trouble: Every time I turn it on, it boot to splash screen and then restart, then go on splash screen and restart again, again, and again.It dont boot to Windows.
I am using 2.03 WWE ROM anh tried to reflash so many rom, both Rom ship and cooked rom but still no hope.
I tried to downgrade its SPL from 1.40 Olinex to original SPL as following thread: http://forum.xda-developers.com/showthread.php?p=2324837#post2324837
But not work, in tri colors screen is still 1.40 Olinex
So anyone pls help, I love my Diamond so muc, dont let it dying like this. PLS...
I do MTTY everytime i flash new ROM
well, has happened to me before, I just take out the battery and leave it out for couple minutes and then should be ok, try starting it when is on the charger, also hard-reset is always an option. I think that is softwware based problem.
cheers
My diamond also started doing this yesterday night, it was working fine until now. I have flashed it with Donsalaris rom which came out Xmas last year and its been working fine for over 6 months now.
Then yesterday night after a long chat it started to do this ??..
I tried taking out the battery still no good. I hard reset it and now works fine for sometime like a few hours to a few minutes and go into this restarting cycle again.
I'v left it on the table and out of the blue it will reset it selfs and start the cycle ?
Seems like a software problem but a hard reset should have solved it right ? But it only partially solved it
Anybody gott a clue as to what it might be ???