i am pretty sure before i did a downgrade from 3.42 to 1.50 then upgrade to m33-2 3.52 that i was able to use wi-fi.
just found out recently i had no wi-fi (led lights are not blinking) when i tried to connect online..
anybody else having this problem..
I haven't upgraded to m33 3.52 yet, so I can't comment for sure. But have you messed with the clock speed of the cpu at all.
I remember reading that wifi doesn't work if you run the PSP at 333mhz - not sure what the default settings are for the m33 firmwares either (don't have my PS handy - sorry).
Hope you get it sorted dude.
~ elroy
I apparently use 3.40oea from Dark Alex and works without any problems. However according to your case, i think its just a software fault. Try flashing it back the psp to sony's official firmware, however there is a chance of bricking the psp.
elroyel1327 said:
I haven't upgraded to m33 3.52 yet, so I can't comment for sure. But have you messed with the clock speed of the cpu at all.
I remember reading that wifi doesn't work if you run the PSP at 333mhz - not sure what the default settings are for the m33 firmwares either (don't have my PS handy - sorry).
Hope you get it sorted dude.
~ elroy
Click to expand...
Click to collapse
no i have not messed with the the PSP SPEED..
Related
Sorry, if this was asked before, I did not find anything.
I have got the problem that a 3G connection frequently stops transferring data. The phone is still connected, but there is no more data transferred to the browser/youtube client et cetera. The only thing that helps is to disconnect and restart the connection.
Is this a known problem with some firmware versions or is my device broken?
i've got the same problem...
what is your provider? mine is o2 germany, maybe its a problem with their network...
also try a radio-update, it got a little better after that for me
maybe you just have poor 3g signal and keep dropping?
Herr_Knigge said:
i've got the same problem...
what is your provider? mine is o2 germany, maybe its a problem with their network...
also try a radio-update, it got a little better after that for me
Click to expand...
Click to collapse
It is not a reception problem. My provider is also O2 Germany, but I use a T-Mobile MDA Compact IV with original ROM. Should not make much difference, though.
i just had a closer look at it and i guess it just hapens when the signal changes from 3g to gprs!?
I was also testing in the last minutes
You may be right, but I just had it the other way round from GPRS to 3G.
You say the problem is still there with the most recent radio ROM? Perhaps it can be tweaked somewhere in the registry like the MTU in desktop Windows etc.
i've updated to radio v1.00.25.BS14 an hour ago and untill now there are no problems at all! hope it stays like this...
That's great news, but until now I did not dare updating inofficial ROMs
Do you know which radio ROM is included in the most recent O2 ROM? I guess the upcoming official T-Mobile ROM will have at least the same radio version.
I have been experiencing the same issue with my handset. I had put it down to the network (T-Mobile UK). I will try upgrading to another radio and see if that helps.
Cheers
Aidan
Herr_Knigge said:
i've updated to radio v1.00.25.BS14 an hour ago and untill now there are no problems at all! hope it stays like this...
Click to expand...
Click to collapse
I think this issue might be related to the radio...Ive just started testing the new BS14 radio and found it much better in the UK for holding its signal.....
I think you might want to try a new ROM-Radio
Maybe I have found a solution which does not need a reflash of the device.
I would highly appreciate if you people test it and report whether I am right or not.
The problem seems to occur when the connection is switched between 3G and HSDPA. So I tried to change the HSDPA Category to a lower value, since my provider has got 3.6 Mbit/s maximum anyway.
You do this via the registry key:
HKLM/Drivers/BuiltIn/RIL/HSDPACat
My initial value was 8, which is 7.2 Mbit/s. I changed it to 5 (5 and 6 are both 3.6 MBit/s, don't know the difference, though 5 seems to work better) and had no connection drops since yesterday.
I would be interested in the initial value set in your devices as well as in the maximum speed of your networks and the values it finally works with.
Not sure what HKLM/Drivers/BuiltIn/RIL/HSDPACat change did, but it did not help the stability. Overall here's what happened:
Default value 8 - download 1.8-25Mbit per sec
Changed to 5 - download dropped to ~0.8 - 1Mbit
Changed to 6 - download speeds 1.2 - 1.5 Mbit
The most stable connection seems to be with HSDPACat 6, though is still has problems every once in a while (average ~2 hours). 5 is a least stable for some reason, it could drop a connection anywhere between 5 and 30 minutes (random).
Trying the same changes with HSUPA enabled does not do much of a difference, except for slightly better responsiveness browsing the web (pings go down to ~80ms as compared to ~120ms without HSUPA enabled)
Hey all, I just updated from Cognition 2.1.1 to 2.1.4 and so far, it's a great experience. I installed it after a fresh wipe and restore thanks to Odin, and I like a lot of the new features.
One thing I do NOT like thou is that I can't get my MobileAP to connect to my X-Box anymore. Now, I alrady adjusted the MTU using terminal Emulator to 1500 (and also tried 1492 at a friend's suggestion) and while my X-Box "sees" the connection, it won't get on XBL.
Please, this is my gaming solution for right now. It worked great, and I need it to work again or I'll go mad from not being able to play Nazi Zombies. Thanks in advance.
I'm having issues with the wifi connection having to be reset every few minutes when used. It seems to outright lose signal and can't even scan for networks until a reset. I'm on CM7 stable, using the latest OC kernel by Dalingrin. Anyone experiencing similar?
I have a similar issue.
From time to time (something like every 5 min), the connection seems ok (in the wifi pannel, it is stated as connected), but I can't access anything anymore by wifi. I have to disconnect and reconnect to my wifi router in order to make it work.
(I also use the last stable CM7... And apart from that, it's gorgeous ! )
So I'm indeed not alone in seeing this... interesting. Thanks for letting me know. As well, I agree, everything aside from the wifi works great and the tablet tweaks incorporated are nothing short of brilliant.
Mine is table with CM7 final and with Philmod 6, both with the 03/31 and 04/04 kernels.
same here - cm7 stable + 4/4 OC
just loaded up nightly 39 + 4/14/11A OC to try that combo
politiclaw said:
I'm having issues with the wifi connection having to be reset every few minutes when used. It seems to outright lose signal and can't even scan for networks until a reset. I'm on CM7 stable, using the latest OC kernel by Dalingrin. Anyone experiencing similar?
Click to expand...
Click to collapse
Is this not the same issue all over about AES? Check your router, if it's WPA2 it's AES, if it's WPA it could be AES.
CM7 and some routers have issues when AES is used, try to disable it.
installed nightly 39 + oc 4/14a no wifi issues so far
khaytsus said:
Is this not the same issue all over about AES? Check your router, if it's WPA2 it's AES, if it's WPA it could be AES.
CM7 and some routers have issues when AES is used, try to disable it.
Click to expand...
Click to collapse
Tanks : that worked for me !
FixB said:
Tanks : that worked for me !
Click to expand...
Click to collapse
You mind Starring this issue on the Cyanogen tracker? Make sure you put all the relevant information as well as your Router HW and FW. Thanks!
http://code.google.com/p/cyanogenmod/issues/detail?id=3314
I posted my remarks in a comment on the tracker.
But I'm afraid I don't know what you meant by "my Router HW and FW" ?
FixB said:
I posted my remarks in a comment on the tracker.
But I'm afraid I don't know what you meant by "my Router HW and FW" ?
Click to expand...
Click to collapse
hardware and firmware, ie brand name and model number and the version of software it's running.
animatechnica said:
installed nightly 39 + oc 4/14a no wifi issues so far
Click to expand...
Click to collapse
Can anyone else comment on this? I might just go down this route, but I'm wondering if there a few more who did similar and are seeing no wifi issue as a result.
Also, I'm surprised to see a CM7 final release with a wifi issue such as this. If it indeed is related to encryption (AES vs TKIP), that's further perplexing. While I could go about changing the settings for my router, I can't go about doing so for many others - particularly in public. As well, if I'm to tether from my N1, I'm going to do it with a password, meaning I'm to do it with AES as there isn't much choice built in.
I hate to say this as I'm impressed with the amount of work that went into (and normally always goes into) CM, but I figure it has to be said. To be fair, I'm not sure how widespread this issue may be (does it affect the version of CM7 on tablets, only?) but I'm surprised it can exist in a version of cm7 considered stable.
politiclaw said:
Can anyone else comment on this? I might just go down this route, but I'm wondering if there a few more who did similar and are seeing no wifi issue as a result.
Also, I'm surprised to see a CM7 final release with a wifi issue such as this. If it indeed is related to encryption (AES vs TKIP), that's further perplexing. While I could go about changing the settings for my router, I can't go about doing so for many others - particularly in public. As well, if I'm to tether from my N1, I'm going to do it with a password, meaning I'm to do it with AES as there isn't much choice built in.
Click to expand...
Click to collapse
I'll try 39 etc but I suspect if they made changes in that regard they would have said to retest in that logged bug.
As far as I know, I've heard reports this happens on some phones as well, not just tablets, not just the NC.
And it doesn't affect most people, in fact I'll bet it affects a minority of folks. If it affected everyone I'm sure CM7 wouldn't have released that way of course.
And yeah I'm with you, I _do not_ want to use my N1 tethered with Open encryption, but not much I can do until this is fixed.
khaytsus said:
I'll try 39 etc but I suspect if they made changes in that regard they would have said to retest in that logged bug.
As far as I know, I've heard reports this happens on some phones as well, not just tablets, not just the NC.
And it doesn't affect most people, in fact I'll bet it affects a minority of folks. If it affected everyone I'm sure CM7 wouldn't have released that way of course.
And yeah I'm with you, I _do not_ want to use my N1 tethered with Open encryption, but not much I can do until this is fixed.
Click to expand...
Click to collapse
Did you try 39 out? This issue is MIGHTY annoying for me as it is kind of hard getting a company with 39 000 employees to back away from AES on the WLAN..
Also going away from AES at home means that I cannot have my access point using 300 Mbit 802.11N which also is a real bummer.
I found this at the CM7 bugtracker, look at the final few posts there is a wifi-driver to try out.
http://code.google.com/p/cyanogenmod/issues/detail?id=3314
Also noticed there was a complete guide about pushing the file here: http://forum.xda-developers.com/showpost.php?p=11974146&postcount=22
So if CM7 on my phone works fine on wifi, that means a NC should work the same more or less, correct?
henel321 said:
Did you try 39 out? This issue is MIGHTY annoying for me as it is kind of hard getting a company with 39 000 employees to back away from AES on the WLAN..
Also going away from AES at home means that I cannot have my access point using 300 Mbit 802.11N which also is a real bummer.
I found this at the CM7 bugtracker, look at the final few posts there is a wifi-driver to try out.
http://code.google.com/p/cyanogenmod/issues/detail?id=3314
Also noticed there was a complete guide about pushing the file here: http://forum.xda-developers.com/showpost.php?p=11974146&postcount=22
Click to expand...
Click to collapse
I guess you didn't notice who posted in that bug, and posted tiwlan_drv.ko in the bug?
Anywho, for me it did help my own and work AP's, but it's still broken tethering to my phone. So it seems better but not perfect, give it a try. Just make a copy of the original tiwlan_drv.ko and push the single file from that zip up in its place and reboot.
Firmware 4.0.5 is out
http://update.archos.com/9/gen9/gen9_4.0.5/firmware_archos_it4.aos
Version 4.0.5 - March 22nd, 2012
Wi-Fi: fix slow throughput and disconnections happening on some access points
HDMI: solve no sound or no video output issue on some TVs
Bluetooth: make sure Bluetooth does not prevent device suspend
VPN: fix VPN connection failing
Touchscreen: avoid loss of first finger touch while tapping with second finger
Edit: Installed, Installed Rooted Surdu_Petrus firmware and now Wifi over my o2 internet station (huawai chipset) works.
http://forum.xda-developers.com/showpost.php?p=23926030&postcount=56
Our Archos-Worker Courville writes there:
For the fritzbox and speedsport owners (Atheros based AP): we are working on the issue with our Wi-Fi chipset provider, we have over the air captures of the issue. Please stay tuned.
Good Evening.
Yep.
Got the update about an hour or so ago.
Sent from my X8 using xda premium
dammit! wish my tablet was working I wanna see if wifi is working now!
Please Delete.
downloading....
Good news! I was having freeze problems with the first ICS update, I installed that... and all gone! Now I have a really nice tablet (only that 512Mb )
Thanks for the info!
Does update increase stability and reduce freezes, resets?
I installed the original version (4.0.4) and went over all the hurdles, reformat, install, slim down app library, turn off wifi, root and install memory management programs etc, with minimal success. The tablet was still not usably stable. Some would run for awhile ok but web browsing did not work at all. Even pdf reading caused soft reboots in different apps.
I downgraded to 3.2.80 and everything works fine again.
Does this version 4.0.5 fix those problems or is it still much less stable than honeycomb?
I am growing tired of all this upgrading and downgrading.
Thanks
Yes !
Doublepost because internet connection timeout
Please delete it
Thanks
Yes !
Yes -
But i think you must test it on your own network and router and such stuff.
For me:
on 4.0.4 wifi had massive problems with my o2 surfstation,
but now with 4.0.5 all problems gone.
For me its the best firmware.
Greeting
P.S you can test it unrooted and if its good then root it.
You can take Surdu_Petrus rooted firmware therefore, or his new custom rom which is based on original archos firmware 4.0.5 and which has lots of improvements.
http://forum.xda-developers.com/showthread.php?t=1562889
Still unstable
The whole 4.0.5 is still unstable for me. My router is an airport express but even with others (no idea who makes them) it is problematic. A weak signal seems to cause connects and disconnects which leads to many programs force closing (Amazon Kindle, Files, Browser, ...)
Taking the microsd out makes it quite a bit better but the card had no problems in 3.2.80
So maybe it would be stable without wifi/sd/many apps, but that's kind of the reason I got a tablet in the first place
Hey peeps, ti me for my first post.
Well i upgraded tO stock germanICS a couple of days back. Everything was working fine until yesterday. WiFi is behaving weird, i can connect with no probs at home but i've noticed that the download arrow from the WiFi icon on status bar is on and off all the time, draining the battery faster than expected(e.g. rom 100% to 65% 3 hours almost no use). So i spoke with a friend of mine, kind of a geek, he told me it could be so me kind of compatibility issue between ICS and old router's firmware. So i went to a bar nearby to check if i could reproduce the same behaviour and everything was working normal.
Did Anyone here had anything similar? I've been surfing to do so me research, but all i've found is so me peoples probs with WiFi not connecting at all and some sII users withe their WiFi module broken.
Thanks in advance!
Also...
I´ve read somewhere that a factory wipe solved some wifi´s peoples probs. As i´m under german ICS LPY i know i´ll be likely bricking the note if i wipe, what leads to teh next question...is it possible to flash a kernell(without the bug) without being root?
Cheers,
VR
edit
So i´ve been reading quite some info about franco´s and speedmod´s kernels, and it´s so confusing for starters.My last question remains , is it possible to flash those for a non rooted device? Anyone that is running it tried wiping? Results?
Thx again
Edit 2
After some research i now know i need to root for any new kernel flash, as i read my post i´m starting to feel i´ve lost my head somewhere, so bear with me, hehehe. Also found out some people tried wiping with franco´s kernel with no probs, so i almost have the info i was looking for. So, in case i go root and get franco´s kernel up and running, do you think my WIFI issues might dissapear after wiping?
I have the same bug...with wifi also the os android buy draining ny battery so bad...im on stick rom gb 2.3.6 with the ssme oroblem....any solution?
we could not get wifi on ics so i called virgin my provider and got a replacement router now all is working fine
anubis1126 said:
we could not get wifi on ics so i called virgin my provider and got a replacement router now all is working fine
Click to expand...
Click to collapse
So better stay stock as i am now...i guess? Because wifi is working but behaving weird at home
wifi solved
had problems with reception, damping compound, have the speed reduced from 300 N router to 54G and he now works perfectly