Database Develop

1G SD memory for XDA2i

Hi,
Does XDA2i support 1G SD card? I tried but it doesn't show up in the explorer.... Can someone help? Many thanks!!

bennykmh said:
Hi,
Does XDA2i support 1G SD card? I tried but it doesn't show up in the explorer.... Can someone help? Many thanks!!
Click to expand...
Click to collapse
1 GB Dane-elec Xs work fine on my Qtek 2020i(XDA2i)
you may format card before use

I have you tried any other card in your XDA IIi.
I have a DANE-ELEC 1 GB SD card and a INOV8 512 MB cards
and both work well.
Sorry I can't be of more help
Muzza

Kingston 2 GB (30651-001.A00LF p799861x01)work as well,
maybe i should have purchase a 4 GB :wink:

Scandisk 1GB SD card working fine!

transcend 2gb 150x absolutely fine work =))
maybe you have bad card? or maybe format it via cardreader can help..

My Kingston 2GB works great on the device, might be a case of a bad card for you, tried it on any other devices?

Worked
I use Kingston 1Gb SD card... 50x and it works fine... maybe your battery is dying

I think theres still a 4gb SD card at work which I'll give a go tomorrow if I get a chance.
I work at CeX in Brighton, England, and we get a lot of different types of memory cards in. So far I'm just using a standard SanDisk 512mb card, but will eventually get a 2 or 4gb (the 4gb we have is £120 >.<)

Kingston SD Card 1GB works fine on my XDA IIi. What brand do you use anyway?

XDA IIi definately supports up to 4gb (150x) cards.

I just got a "Topram' 4gb 150X...despite formatting both via card reader and my device it will not read...

Does it show the card size in the Memory cp? Or can you just not transfer files to and from it?

neither...as soon as I insert it into the 2i I am asked to format it to make the card ledgible...so I agree...but it still does not show up at all. Neither in memory size menu or file explorer.
I have formatted it via card reader on the compeuer too...It accepts files via card redaer so the card itself is ok.
But every single time I insert it into the PDA it asks me to format it again and it never shows up.

bit off topic but as anyone else had a problem with SD/MMC cards working for a while (sometimes as little as 6 months other times over a year) then totaly stopping ie show as not being there in any card reader, only to come back to life after about 12 months stuck in a draw. I have had this with 2 cards so far and got 1GB card in the draw at the moment which stopped working just as I put some important files onto it

SD Cards
I have a 4GB Transcend, 2GB SanDisk and a 512MB Unbranded and they all work perfectly fine in my xdaIIi, maybe your card reader is a bit iffy?
EDIT: By card reader I mean the bit that you insert the card into the xdaIIi

It may simply be certain makes of cards that work, and certain that dont. All you can do is hope the retailers let you try before you buy

Tom Swinnen said:
Scandisk 1GB SD card working fine!
Click to expand...
Click to collapse
i also have a SanDisk Ultra II 1GB in mine

XDA 2i - SDIO size - does anyone tried 4G?
Hi,
I want to buy 4G SD card to my XDA 2i, but I would appreciate if someone can tell me if he succeeded to work with 4G card.
10x
Dror

light said:
I just got a "Topram' 4gb 150X...despite formatting both via card reader and my device it will not read...
Click to expand...
Click to collapse
erm... u made sure u formated them as FAT not FAT32? i had no end of probs with my 2020 when i did that, and the 1gb unbranded card i have in my 2020i is FAT and works fine, as most hand helds and camera (i use it in my konica/minolta SLR digital, it hates FAT32 file systems too) format them as that and jobs a good one!

Does a 4GB SD-Card work in Alpine??

Hey guys I`ve bought an Alpine and I want to put a 4GB SD Card in it??
Do you think, it works? Or is the maximium 2 GB, which works in Alpine?
CU

4 gb cards work......mostly.
I've used both the A-Data and the Transcend 4 GB cards on my Alpine. There is only one problem I've experienced. If your 4 GB card is less than half full (i.e. available storage is > 2gb), AND you've configured your camera to save the pictures you take to the SD card directly, then you may experience an error. The error simply says it can't save the SD card. If you card is more than 50% full of other stuff, then there is no problem using the camera application and saving your picutres directly to the SD Card.
I RARELY use my camera, so I really don't care. Plus, I have enough stuff on my SD card so that it never has more than 2 gb of available storage (i.e. its always more than half full). Consequently, this bug in the camera application is really not much of a nussiance.

ok, thank you very much for your reply...

It work, as I had a Kingston 4GB SD Card

without problems??
can you give me some more details about your sd card??
thank you

A 4Gb will work, but it does depend on the make - since, I'm guessing, cheaper makes use cheaper parts. Kingston and SanDisk seem to be pretty good.

I have a generic (samsung oem perhaps?) 4gb SD card and it works fine apart from it seems to be a tight fit in the slot. No problems with it as yet though.

SD card
I used a topram 4GB mini with adaptor and it did not work.
I then bought a Transcend 4GB MMC+ (plus) and it works like a dream.
I hope this helps you.

Watch out that the card is not a sdhc card. SDHC cards look like normally sd cards, but they dont' work on the Alpine.

pbohemien said:
Watch out that the card is not a sdhc card. SDHC cards look like normally sd cards, but they dont' work on the Alpine.
Click to expand...
Click to collapse
all sdhc (high capacity) cards have "sdhc" sign so you can easily discern them
only the newest htc devices support sdhc cards

I'm using 4GB Tanscend SD Card with my alpine
and its working fine

Thanks to the advice here, I bought a 4Gb Transcend MMC plus and it works beautifully.
So much space is a real bonus as I have Tomtom maps of Europe, the whole of the USA, 6 or 7 full movies plus 20 or so albums worth of mp3's still with 500mb free for odds & sods.

Hi,
I am using a HAMA 4GB, and it is working more or less fine.
I don't know if it is a card issue or caused by the heat recently in Austria, but my Nav freezes from time to time.
I have to turn the 2020i off and then on, then it works again.
Some days ago, the card suddenly lost some data....

I have a SanDisk 4GB SD Card, however when I put it into my Alpine it doen't seem to recognise it. It just doesn't show up. Can anyone give me any hints on how to force it to look for it or something like that?

please help How big memory card xda2 suported and which types of card

How big storage card xda2 suported and which types of card it will support under wm6 , do big memorycard slow ur xda2 .thanks

If you have SDHC Card, you can help us to try driver in this thread
http://forum.xda-developers.com/showthread.php?t=351811
And then you can feel it

So far I haven't been able to get my 4 GB SD to work on my Hima...... any suggestions are welcome . It's an Emtec btw and it doesn't hold the HC logo, but I also can't use it in my camera so I think it's HC.
2 GB is currently the max I can use.
About the speed: the hardware is basically the bottleneck. I have several speeds up to 150, but there is no (noticable) difference between them in my Hima.

i bought kingsten 2gb sd card and its working perfectly
i bought kingsten 2gb sd card and its working perfectly, the dealer said to me larger then 2gb is not supported by xda2. sorry for my english,thanx all here

Up to 2GB SD card is supported, any SDHC card can and probably will cause problems, either till someone adapts the SDHC driver or till we give up hope.
But IF you're able to use SDHC on Hima, (without messing up any other feature) please tell us how you did it.

Has anyone tried a Sandisk 16G SDHC?

I've searched the forum without much luck so hopefully I won't be flamed..
I am looking at getting either an 8G or 18G Sandisk microSDHC with adapter.. but wondered if anyone else had taken the plunge yet?
Thanks
erosco

*bump*
Isn't there anyone out there brave (nee dumb) enough to try out one of these?

Hello i have 8G Sandisk microSDHC Class 6, trinity dont work corectly, when i soft reset access ton the microSDHC is ok, but when long time arrive access to microSDHC is slow. i return to my "old" miniSD 2go an now access is ok.
microSDHC 8G work fine on touch HD i think my rom drivers is not ok for microSDHC.

erosco said:
I've searched the forum without much luck so hopefully I won't be flamed..
I am looking at getting either an 8G or 18G Sandisk microSDHC with adapter.. but wondered if anyone else had taken the plunge yet?
Thanks
erosco
Click to expand...
Click to collapse
Hello!
Tried with a sandisk 16GB SDHC micro. I formatted but the Trinity formatted only for 3 GB :-((.I formatted in a notebook for 16 GB, but the HTC saw the card as a 3GB one :-(
Now I should try another mini adapter, because my one is a little old (used for a 2GB microSD)

Any news on this? I just purchased a p3600 and 16 gb would make it the perfect Phone for me.
Someone else had an 8GB SDHC and in the the trin it showed 0gb but he was able to write/read the full 8gb. Maybe you could try to fill your card to the limit too.

I have a SanDisk 16GB SDHC which didnt work with the original ROM (also only saw approx 3 GB). But updating the ROM fixed it and it now works perfectly. So I guess its a driver thing only.

Wohoooo!
16gb sandisk is on it´s way.
which class is the Card (2,4,6)?

i want to know too. im guessing its a class 2.

I couldn´t find any other than class 2 too. So I guess it is class 2 but I decided to go for 8gb first and maybe upgade to 16gb in March/April when I expect the prices to drop because 32gb will be available in stores.

any link for update?
(shall I update the whole ROM or it's just a littla patch?)
working with WM5 only... (don't wanna upgrade for WM6 :-( )

HTC 6300 and SDHC 16G
Hi, My experience (2 days) is the following:
- PDA recognises the SDHC, with 15,5 GB (iso 16G but this is normal)
- I copied from an old backup lots of programs, etc using a PC and all files are seen by PDA and programs work fine...
- BUT I tried to move files and to install in SDHC card directly from PDA and it does not work.
I am now tying to find a driver or something, but not success for the time being.
(I am using a class 6, HTC P6300 with original WM5)

Hi again,
I heve rechecked and the only failing action is the SW installation in SDHC card (both from PC and from cab file).
Any idea about why installation is failing?
Thanks

Hi people,
I was brave enough to buy last week a Sandisk 16 Gb microSDHC class 2 to use on my HTC P3600. I'm using an old miniSD adapter and my cooked ROM is [PTG] WM6.5.3 OS 5.2.23554 (build 23554.5.5.0) by Antix. I have not installed any other custom sdhc drivers. It is using the original ones that come in the ROM.
I never formatted the card. Not on Trinity or PC. So it has the factory format. I just tested with H2testw to confirm that it was indeed a 16Gb card (I bought from ebay-30€) and also the write speed is 5.8Mb/s.
First impression was that the card worked flawlessly with 15185Mb recognized. I took some photos, installed programs directly to the card, all good.
But then I noticed that 1 in 5 times I reboot the phone, I see some missing icons and it says no storage card inserted. The icons are stored on the card that is why I miss them. To solve this I need to reboot the phone again.
Other than that it seems fine until now. I will update this topic if anything different happens.
Still I would like to hear if anyone has a flawless experience with Sandisk 16Gb microSDHC with some other ROM / drivers.

XDA IIs compatible with SDHC with WM6.5?

Hi,
Can anyone tell me if the XDA IIs (BA) is compatible with SDHC cards when upgraded to WM 6.5?
If so, what is the largest SDHC cxard anyone has tried successfully?
Thanks,

independant from the os used, there is no sdhc driver for the blueangel, so none works. the biggest sd card to work in a blueangel is a 4gb sd card, as long as it is not sdhc, there are different brands working, you gotta try for yourself, everything above 4gb is definetely sdhc and will not work.
in my experience 2gb cards work best and are the cheapest anyway, a 4gb card can easily cost 8-10eur while for the same price you get 2gb cards in a three-pack, so having 6gb

HCsd Cards
Thanks Chef_Tony for your response.
Currently I use 2 x 4GB SD cards and 1 x 2GB SD Card. All work reliably although once I dropped my device and after a reset and re-install, I had issues with GPS software freeezing after about 15 minutes.
A re-format of the 4gb card and re-copy apps back and all has worked well since.
Only ask as I have friend who is into IPaq's and when he upgraded from WM2003 to WM 5.0 he was then able to use SDHC Cards.
But, since your response, I won't worry about buying SDHC cards.

yes, that is possible with certain devices, my universal takes sdhc cards too, since it is wm6.1 because it contained a driver to enable sdhc support. but since there is no such driver for the ba (yet) no card above 4gb will be usable.