I recently had the chance to play with the Nokia E61i and the built in VOIP client is brilliant. It allows you to use internal speaker, speaker phone and bluetooth with VOIP calls.
I had a Pocket PC before HTC Titan, but unfortunately had to sell it because I am traveling a lot now. I will primarly use my device in South America where the WCDMA band is different. I am thinking about getting the Nokia E90 or the HTC Kaiser, but must make sure the Kaiser will have built in VOIP client. Can someone confirm? Thanks
Even knowing there are many VOIP applications for Windows Mobile, I tried many with the HTC Titan and only ONE worked ok, but the problem was it only worked trough the speaker phone which was very annoying and not convenient.
I understand voip should be included in WM6.
IE : the integrated phone application can do voip.
Tried it with WM6 and voipbuster on my HTC Wizard and it's working although the sound is not so good sometimes because of the Wizard weak processor (I think).
NL4JC said:
I had a Pocket PC before HTC Titan, but unfortunately had to sell it because I am traveling a lot now. I will primarly use my device in South America where the WCDMA band is different. I am thinking about getting the Nokia E90 or the HTC Kaiser, but must make sure the Kaiser will have built in VOIP client. Can someone confirm? Thanks
Click to expand...
Click to collapse
I have already asked that question some time ago - see http://forum.xda-developers.com/showthread.php?t=322377 - and it turned out there is no VoIP support in Kaiser by default. I haven't seen any traces of VoIP in Kaiser I've played with two days ago. And finally, take a look into official Kaiser product sheets - they don't mention VoIP at all, while it's a good feature to shout about.
So basically, there is no VoIP support in Kaiser. However, installing it as an add-on from cab files might have a chance to work, but someone with real Kaiser with hands would need to test it and let us know.
That is really sad. I guess I am going to have to go with the Nokia E90 until a Windows Mobile device has a built in VOIP client.
NL4JC said:
That is really sad. I guess I am going to have to go with the Nokia E90 until a Windows Mobile device has a built in VOIP client.
Click to expand...
Click to collapse
VOIP is easily installed by YOU.
There's no reason to not get a kaiser because it doesn't have this if you are a member of these forums.
evolution_theory said:
VOIP is easily installed by YOU.
There's no reason to not get a kaiser because it doesn't have this if you are a member of these forums.
Click to expand...
Click to collapse
Amen !
I installed the voip cab from this forum, that I was using on my tytn, and it works fine on the kaiser. Hope this helps.
briols6 said:
I installed the voip cab from this forum, that I was using on my tytn, and it works fine on the kaiser. Hope this helps.
Click to expand...
Click to collapse
Well, this is great news! I hope I could confirm it as soon as my Kaiser come - I couldn't resist and pre-ordered one in Handtec.co.uk. ))
Installed the .cab as well and works like a charm.
I installed the voip cab from this forum, that I was using on my tytn, and it works fine on the kaiser. Hope this helps.
Click to expand...
Click to collapse
I have Kaiser now, I've installed VOIP Drivers.cab and MajikVOIP.cab. Installs all components correctly, logs into SIP account, makes a call, but... sound comes out of external speaker, instead of internal earpiece!
Did you manage to make it work properly and if yes - which cabs exactly did you install? Thanks.
im keen to find out also! I thought that you could only access voip using cooked roms.
There are a number of WM5 VoIP endpoints available.... however I'm not entirely sure about WM6 yet. I work in VoIP, and its on my list of things the check now that i have my shiny new TyTN II sat infront of me!
I'll keep you all updated with my findings.
Mind you.. i must check tmobiles policy on VoIP, I had a sneaky feeling they are blocking necessary ports...
managing your voip client?
for those with Voip enabled and working, can you tell me how the voip client determines which connection to use, ie wifi or using the data plan?
I have installed Fring and it works well. Is this different than the other voip programs discussed above?
from what i understand, Fring is a stand alone app, where as the voip i am looking at is fully integrated into the phone and uses the standard dialer, hence my previous question about how the Voip determines which connection to use? And if that is automatic? ie. if wifi is available will it just connect via wifi and if wifi isnt available will it then revert automatically to using the data plan to make the voip call.
Not that this helps with the Kaiser, but according to HP, the new iPaq BM series should have the VoIP client enabled by default; in fact, as far as I'm aware, it's the only device announced with it enabled.
Hi,
I'm new to the PDA and WM phone world, and i have a quick question. If there was a voip program of sorts for a phone like this, would that mean you could just pay for a data plan and not have to pay for a voice plan from a company like AT&T? And then u could still text message, e-mail, internet and the sorts, but also be able to make calls through your program?
Hi
Most providers (certainly here in the UK) flag data used for Messenging and/or VoIP so they are charge at a higher rate or excluded from your inclusive allowance so you pay extra or not blocked completely.
VoIP on a mobile device is only really of benefit when you are in range of a wireless connection.
Regards
Phil
Hey, thanks for the reply. Does anyone know if AT&T restrict data like he said? That's gonna be the main service i will be using, and want to know if they do or not.
Related
Hello,
I bought the Herald because I wanted to use VOIP on it eventually.
But then it doesn't seem to work quite as expected. The main problem is that the sound doesn't come from the earpiece but from the speakerphone instead...
Has this problem been solved???
Thanks in advance!
/Stig
tested , it is not working on T-mobile Wing, it keeps saying "searching", I may have to change ROM to use Microsoft VOIP.
the SJphone works fine on Wing
cgigate said:
tested , it is not working on T-mobile Wing, it keeps saying "searching", I may have to change ROM to use Microsoft VOIP.
the SJphone works fine on Wing
Click to expand...
Click to collapse
I had made an earlier POST about using VOIP on wing. Will appreciate your help to setup VOIP on Wing. I downloaded and installed WM6VOIP and Setupvoip from the forum - but did not understand how to get the device to dial out. Do you need to use the phone dialer or do you need to use another softphone software.
Will appreciate your thoughts...
Nick
zerodiscount said:
I had made an earlier POST about using VOIP on wing. Will appreciate your help to setup VOIP on Wing. I downloaded and installed WM6VOIP and Setupvoip from the forum - but did not understand how to get the device to dial out. Do you need to use the phone dialer or do you need to use another softphone software.
Will appreciate your thoughts...
Nick
Click to expand...
Click to collapse
anyone bother to read around a bit...
it uses the same dialer for GSM and for VoIP calls.
anyway - fring is the best solution
Did anyone try to use a SIP client on the Diamond?
Go and give a try Fring. Website: www.fring.com
Go to www.fring.com and give a try. It works for me
Hi,
Unlike any of the voip/sip apps ive tried on the diamond the only one working correctly, including usage of the internal speaker instead of the external one where the whole world can listen in on your conversation, ageet has managed to create a proper voip app.
http://www.ageet.com/us/products-agephone-mobile.htm
Enjoy
thankssss still looking for a good solution, fring and sjphone dont work properly on my diamond. Too many drop outs, bad sound quality and indeed external speaker.
Will report back here, hav to hurry the wintersport holiday is coming and need a good softphone to call for free
http://forum.xda-developers.com/showthread.php?t=443972
nickokio said:
thankssss still looking for a good solution, fring and sjphone dont work properly on my diamond. Too many drop outs, bad sound quality and indeed external speaker.
Will report back here, hav to hurry the wintersport holiday is coming and need a good softphone to call for free
Click to expand...
Click to collapse
I just tried it...it seems to work allrite. But still external speaker on a touch diamond with the latest version (2.7)
Another problem with voipbuster, when other side picks up the phone connection drops out...
So not worth the money yet
nickokio said:
thankssss still looking for a good solution, fring and sjphone dont work properly on my diamond. Too many drop outs, bad sound quality and indeed external speaker.
Will report back here, hav to hurry the wintersport holiday is coming and need a good softphone to call for free
Click to expand...
Click to collapse
I agree, poor quality using Fring, and it stopped my browsers working over NextG...
I found using this (http://forum.xda-developers.com/showthread.php?t=443972) works the best and the most simple, but think there must be a problem with the dial plan as I can't call mobiles.
Do be careful when installing wm6voip.cab.
In most cases it will break GPS functionality, which will require a hard reset.
I remember there is a thread on getting this to work anyway without breaking GPS, if you do incist on using wm6voip.cab ( i think its crap ).
Go with ageet. its such a nice app works great, uses internal speaker. really worth the money, especially to reward a company to have finally fixed the speaker issues, something other companies failed to do for... what is it.. years now? on windows mobile platforms.
today i installed the beta version of sjphone for wm5...
Seems to work very good so far. Dislike agephone as well...not worth a single penny
Fring sucks. It tunnels everything via their server in England.
dubdeckerbuss said:
I agree, poor quality using Fring, and it stopped my browsers working over NextG...
I found using this (http://forum.xda-developers.com/showthread.php?t=443972) works the best and the most simple, but think there must be a problem with the dial plan as I can't call mobiles.
Click to expand...
Click to collapse
Yeah the default dialplan is American. You need to edit ipdialplan.xml. I can give you mine if you want, will work fine if your SIP provider doesn't need any special pre-processing. I use Internode's nodephone service over nextg on my jasjam.. saves me a lot of money.
I'd like to hear if wm6voip.cap works well on the Diamond. I'm reluctant to buy any phone without VoIP support these days.
Tremere said:
Yeah the default dialplan is American. You need to edit ipdialplan.xml. I can give you mine if you want, will work fine if your SIP provider doesn't need any special pre-processing. I use Internode's nodephone service over nextg on my jasjam.. saves me a lot of money.
I'd like to hear if wm6voip.cap works well on the Diamond. I'm reluctant to buy any phone without VoIP support these days.
Click to expand...
Click to collapse
Ahh, I thought that might be the case... Yeah, I'm using Nodephone too!
I did open up the dial plan in XML Notepad to check it out and it looked American, but was needing some direction as to what would need changing...
To have your would be great if you don't mind?
I've not really tested the VoIP service on my Diamond that much yet, but it is forcing the VoIP to go handsfree which is annoying! But I belive there may be a fix for that...
So enlighten us with your philosophy on why it would not be worth a single penny.
nickokio said:
today i installed the beta version of sjphone for wm5...
Seems to work very good so far. Dislike agephone as well...not worth a single penny
Click to expand...
Click to collapse
well the best reason:
Its not any better than sjphone beta so not worth anything...
I deinstalled it because off:
- Poor sound quality
- Random disconnects
- Disconnects when other side picked up the phone
- And the internal speaker is not working for the diamond
Tested with voipbuster
http://www.voipbuster.com/nl/smart_dialing.html
Riel said:
http://www.voipbuster.com/nl/smart_dialing.html
Click to expand...
Click to collapse
w000t u rule
All the reasons you name are in my opinion not related to AgePhone at all but to your voipproviders and/or bandwith. Also the application requires reading the documentation, setting up proper codecs, and also enabling a feature that WILL enable the internal speaker on your diamond. (Speaker Switching Option) This has been tested and working quite fine.
nickokio said:
well the best reason:
Its not any better than sjphone beta so not worth anything...
I deinstalled it because off:
- Poor sound quality
- Random disconnects
- Disconnects when other side picked up the phone
- And the internal speaker is not working for the diamond
Tested with voipbuster
Click to expand...
Click to collapse
This is not true client initiated sip/voip, but a small client that will initiate a 2 legged call back system where your phone will dial a local number. which means you will still be billed for local phone calls. so this is only usefull for long distance calls abroad.
SKyLiNe1980 said:
All the reasons you name are in my opinion not related to AgePhone at all but to your voipproviders and/or bandwith. Also the application requires reading the documentation, setting up proper codecs, and also enabling a feature that WILL enable the internal speaker on your diamond. (Speaker Switching Option) This has been tested and working quite fine.
Click to expand...
Click to collapse
Well for my configuration and voipbuster with good internet connection and wifi sjphone beta performs better than agephone
SKyLiNe1980 said:
This is not true client initiated sip/voip, but a small client that will initiate a 2 legged call back system where your phone will dial a local number. which means you will still be billed for local phone calls. so this is only usefull for long distance calls abroad.
Click to expand...
Click to collapse
True thats too bad, but can anyways be usefull sometimes
And the sms option should work in abroad countries
Hi,
I think it can be a solution for everyone who wants to use M$ VoIP and GPS in his Diamond (till today if you use VoIP, GPS goes dead).
IMHO problem was one file called dnsapi.dll in VoIP cab which overwrite original one in ROM. It caused that GPS goes dead.
I've removed this file from my OEM package and cooked a ROM with VoIP. I tested this and VoIP and GPS is working without any problems.
I using only OEM packages - if someone can make a cab file from attached OEM package and test it, maybe we will have a solution for everyone !
[2008-08-08] UPDATE - CABs can be found here - http://forum.xda-developers.com/showpost.php?p=2497988&postcount=8
Sound great!!
This is what i´ve been waiting for... fring does the trick... but BAD.
Sweet.
Good idea, a shame I don't know how to make a .cab.
None of the VoIP programs I tested work on the diamond (even Fring doesn't work properly...)
d3us said:
Good idea, a shame I don't know how to make a .cab.
None of the VoIP programs I tested work on the diamond (even Fring doesn't work properly...)
Click to expand...
Click to collapse
Fring and Skype 6.1 works fine on my Diamond and the GPS too.
halloj said:
Fring and Skype 6.1 works fine on my Diamond and the GPS too.
Click to expand...
Click to collapse
I'm not talking about Skype and Fring - issue was with VoIP drivers from M$. With that you can dial via e.g. Halonet from normal dialpad.
Anyone tried to make proper CAB? For chefs attached OEM package is ready to cook.
Hi,
I tried to make a proper cab, but apparently I failed
I damaged my original dnsapi.dll, now I have one with filedate
31.01.07; could someone upload the original one from a 1.37 rom?
Thanks,
Seven
mcseven said:
Hi,
I tried to make a proper cab, but apparently I failed
I damaged my original dnsapi.dll, now I have one with filedate
31.01.07; could someone upload the original one from a 1.37 rom?
Thanks,
Seven
Click to expand...
Click to collapse
Here you are...
Aaaah, thanks Saves me from Hardreset because the VOIP drivers wouldn't uninstall anymore... Have something in return: Here you have two CABs which do not install a dnsapi.dll, and tested them on my diamond. Works perfectly. You even dont have to reset the phone...
If feedback is positive, maybe the OP could change topic into "[solved]..."?
One tiny thing left to do: Change the ipdialplan.xml to make VOIP dial those "+1 (999) 1212 - 1212" numbers as well ^^
Thanks and enjoy,
Seven
what gps program are you using ?
iliescu902 said:
what gps program are you using ?
Click to expand...
Click to collapse
I've tested in HTC GPS Tool and Automapa (Polish navigation).
Anyone tried CAB prepared by mcseven?
I used tomtom 7, outdoor gps and mobile terminal emulator to see nmea records on COM4 directly. all 3 programs were running simultaneously and were receiving GPS.
I also tried to connect the VOIP to my asterisk, works as well, but cannot call any +1* numbers or numbers with brackets, since I dont know how to change the ipdialplan.xml in /windows...
I didn't know wich one of the .cab I should install so I installed both; I started with the drivers, it did nothing then I installed WM6Voip, it seemed to work. So I installed SIPconfigTool to configure my connection and I tested TomTom, the GPS was detected (whereas it wasn't with the original WM6Voip). Nevertheless, I tried to use my VoIP account over 3G but it couldn't connect (whereas Fring can connect).
works fine using tomtom 7 and GoSIP...
Yes, possibly the built-in VOIP cannot use STUN functionality, and fring can. I believe that to be a firewall issue.
However, now I seem to have that 5 seconds silence bug. I establish a connection, but 5 seconds into a call the diamond ceases to transmit voice. Receiving voice from the remote party however continues flawlessly. No Headset connected and not put into a docking station. Has anyone a similar problem or even a solution to that?
mcseven said:
Aaaah, thanks Saves me from Hardreset because the VOIP drivers wouldn't uninstall anymore... Have something in return: Here you have two CABs which do not install a dnsapi.dll, and tested them on my diamond. Works perfectly. You even dont have to reset the phone...
If feedback is positive, maybe the OP could change topic into "[solved]..."?
One tiny thing left to do: Change the ipdialplan.xml to make VOIP dial those "+1 (999) 1212 - 1212" numbers as well ^^
Thanks and enjoy,
Seven
Click to expand...
Click to collapse
I've installed both your CAB's. But i'm wondering why I can use VoIP to call? Should I have another program installed?
I've installed both your CAB's. But i'm wondering why I can use VoIP to call? Should I have another program installed?
Click to expand...
Click to collapse
Well, yes. Use a program called SIP config (anyone you like, I use this one) to program your provider settings into the phone. Then make sure to visit Settings->Phone->"Internet" Tab and change it from "Never" to a setting of your liking. After that (and pressing ok in the top right corner) it should register with your VOIP provider as soon as there is a data connection available. If your phone places a call via VOIP, it will ring a short audible "beep" prior to connecting. I found no way to tell it explicitly "use cellular network" or "use VOIP network" for placing a call. Perhaps this will be added in a later ROM.
However, now I seem to have that 5 seconds silence bug. (...)
Click to expand...
Click to collapse
I believe that to be a firewall issue as well. Yesterday I went home from work and put the phone directly into my home Wifi net with direct connection to my asterisk server. Everything works fine.
Today I used another access point at work, and it worked fine as well, so if you are having trouble getting voice to the remote party it most likely is your firewall's fault.
btw I have not found a way to use the internal=headset speaker, it will always use the loudspeaker for received audio.
wow, big THANKS.
works fine for me. Could connect to my Axon PBX with SIP and GPS also runs fine (Tested with tomtom7 and WMMiniGPS).
I realy waited for that and had also two hard resets behind me previous during tests
It almost works for me. I can connect, but my voice doesn't arrive to the other side of the line at all. Neither does the voice of the other side arrive to me. The line is open, but seems 'dead'.... what am I doing wrong?
ipdialplan.xml for sipgate in Germany
Fantastic, with the new cabs now GPS and WM6VoIP works. Attached a dialplan which I modified last year for my Kaiser. It works with my sip provider in Germany (sipgate) and you can dial local plan, leading 00 or + or 0. It may work also for others.
voip speaker
Great job!
Is there already any solution for the intern/extern speaker problem?
Hello.
I want to buy HTC Touch Pro, but it is importand that VOIP (SIP) is working on this device.
Can somone tell me if it works or not???
Thank you,
That is a very good question Goose;
The firm where I work is migrating to VOIP, and I'd like to use the HTC as main line phone.
Let's hope someone tested the VOIP on the Raphael...
http://www.voipphreak.ca/2008/03/29...mobile-6x-for-free-voip-calls-using-asterisk/
don't know if it's working, but it should I cannot test it for you..
Thanks Lepermessiah,
I'll test it as soon as I receive my device back from repair (1 week hopefully) and keep you posted on how this SIP VOIP client runs...
Perhaps take a look at this thread: http://forum.xda-developers.com/showthread.php?t=401608
I havent tested it out yet as I also have a raphael on its way back to the retailer at the mo.
Lol, you too Mrvanx?
Seem that the Raphael is like Vista: they released it too early without fully testing it and resolving all the bugs...
It is pointless to buy such advenced smartphone without voip support.
I mean, it is whole point with wifi on it.
Ow yes, we can browse web, but I can't really find it fun to use Opera Mobile on a small screen.
It is possible to make Voip calls using skype for ppc. there is a download availible on ppc warez
zex11 said:
It is possible to make Voip calls using skype for ppc. there is a download availible on ppc warez
Click to expand...
Click to collapse
No need to refer to warez, please! Skye for ppc is available from Skype http://www.skype.com/intl/en-gb/download/skype/windowsmobile/
And when skype became SIP?
I asked about SIP based VOIP not Skype.
Goose80 said:
And when skype became SIP?
I asked about SIP based VOIP not Skype.
Click to expand...
Click to collapse
Like i mentioned try the thread above and see how you get on, on my other device (HTC Hermes) it works a charm, VoIP was part of Windows mobile however it never seemed to make it to any of the official builds, mostly because obviously it takes business/revenue away from a mobile network provider correct?
Why present the customer with a subsidised handset which can bypass thier mobile network to make calls for free/cheap??
I tried to connect my touch pro to my asterisk server using the "built in" client. It kind of worked, I could initiate/answer calls over wifi, but about 2 seconds after the call connected the phone went in to sleep mode and cut off the wifi connection, tried messing around with the settings in advanced config but nothing helped. Also with the VIOP cab installed it is impossible to use the GPS.
I wouldn't recommend it.
Caind said:
I tried to connect my touch pro to my asterisk server using the "built in" client. It kind of worked, I could initiate/answer calls over wifi, but about 2 seconds after the call connected the phone went in to sleep mode and cut off the wifi connection, tried messing around with the settings in advanced config but nothing helped. Also with the VIOP cab installed it is impossible to use the GPS.
I wouldn't recommend it.
Click to expand...
Click to collapse
Yes i noticed the GPS conflicted with the driver, pretty sure there is a solution in the thread.
Take a look in advanced config (3.2) i THINK there is a setting in there to stop the device sleeping as a call is made, i WOULD look but my raph doesnt get back to me until either tomorrow or the day after.
i am ignorant apparently, so what is the difference between SIP and voip skype calls?
why can I not refer to ppc warez?
zex11 said:
i am ignorant apparently, so what is the difference between SIP and voip skype calls?
why can I not refer to ppc warez?
Click to expand...
Click to collapse
SIP is a protocal which many VoIP providers use, see explanation here.
Skype is a brand name, they use thier own protocol to communicate hence thier own software. the "built in" VoIP drivers use SIP so you can use any provider you like which supports SIP.
thanx mrvanx
After all, is this possible or not??
I can voip with SJphone and Fring, but they have the problem of the external speaker, but I cannot voip using the multiple tutorials here on xda to make voip calls with the phone (without 3rd party programs...)
zex11 said:
i am ignorant apparently, so what is the difference between SIP and voip skype calls?
why can I not refer to ppc warez?
Click to expand...
Click to collapse
Warez is a reference to illegal software - we don't want to attract that kind of attention as it will only end up causing too much hassle for the whole forum . See the rules for posting (no. 11) here: http://forum.xda-developers.com/showthread.php?t=221545
yes that is true, but i didnt refer to illegal software, skype mobile is free to use. i refered to ppc only because there are a lot of advices if something is wrong with installation or something else. nothing more.
sorry anyways
Guys.
Is there any 3part SIP software, just software so we canuse any VOIP provider with SIP suport?
To be cleared: I do not have this phone, I want to know if VOIP over SIP will work before buying it, if not, I have to wait for fix or other phone...
Hey together,
still trying like grazy to get on my Xperia X1 VOIP up and running with the native client (dont want frings, skyoe etc.) and I was reading allready pages with the stuff but some got it up and running. But nowhere wich driver to use etc. I come till -> NO Services
Anyone it up and running on Xperia X1 ? I user Valkyrie_v1.2 WWE Black Edition- wm6.5 21232+topaz ROM
Please let me know what to do
Thanks
I am just curious why you don't want to use skype. There is the official SE Skype panel available.
Back on topic:
A friend of mine wanted to do it, but lost interest after a while. I will see if he has a solution and get back to you .
hey yeah would be very nice from you. The problem is that my family is in an other country and Iam happy that they know what is a telephone not even they dont have an PC laptop etc. Skype I have as well for the younger generation
Try Nonoh ...
my provider I have allready Search only the settings / worling voip for X1
If the country u want to call is one of these, try tuitalk. Is free. Do extended register and u get 6 minutes of free call/24h.
Success!
http://www.tuitalk.com/provisioning/end-user/zhtml/countries.zhtml
Speedy1205 said:
hey yeah would be very nice from you. The problem is that my family is in an other country and Iam happy that they know what is a telephone not even they dont have an PC laptop etc. Skype I have as well for the younger generation
Click to expand...
Click to collapse
When configuring skype, just add some credit to your account.
Then, connect your mobile number to your account.
When sending sms, or making calls with your skype account, people see your real mobile number, instead of nothing..
Most of the landline calls are not much expensive.
With skype i can make good calls, even on 3g!
"not even they dont have an PC laptop etc. Skype I have as well for the younger generation "
using skypeOut you can call any landline phone / cellphone from skype
it's not required that the person have skype or the computer turned on
or even owning a computer
Don't know if the issue already has been solved, but me too was looking for a voip solution, other than skype, simply because some of the voips offer free calling to landlines in about 90 countries for just 10 euro for 90 days and so on, plus making calls to vietnam only cost me 0,027 ct a minute, yes 2,5 ct a minute, while skype or other voip are much more expensive. Skype is great, if all my friends and relatives are on skype too.... unfortunately...
Anyway, how i set up my device for voip (i'm on rom valkyrie firestorm 2.8.5 leo, pretty good, but still a bit buggy, not the ideal rom to test on, but it works.
1 install: destr0_VOIP_WM61___SIP_Config_1.1
2 install: WM6VoIP (don't know why actually, but i simply followed instructons from another website, you can try and leave this option out)
3 install: VOIP Drivers (don't know why actually, but i simply followed instructons from another website, you can try and leave this option out)
4 extract idialplan to windows directory on yourdevice, thus not your pc windows dir.
5 install: Audioroute, this did the trick for me, as i could not hear the other party, i installed this app and everytime i want to make a voip call, i'll use this app to route the sound to the earpiece, and it worked for me
Configuring voip.
After you have installed everything you wanted to install, soft reset your device.
When restarted, you'll see an extra line on your today screen (disable tf3d for the moment) tap on it will bring you to the phone menu, where an extra tab is added for internetcalling, configure as you wish.
Next, in startmenu, open the application sip config tool, and enter the details of your voip service. Don't worry that there is so less info to fill in, i was surprised too, but it only needs username an pw and server and port, that's ll.
By installing audioroute, you'll see an icon next to startbutton, pressing it wil allow you to route the audio the earpiece, or switch back to normal again.
Note: when the line on the today screen says that the service has been selected, all calls will be automatically made trough voip, and if it says unavailable or something else, then it will most propably make regular calls.
Try it, it may not work the first time, try soft reset and try it again.
Hope i could help you out.
Do I understand correctly that this lets you call a landline for free? Since you mentioned that Skype, et al. were more expensive than landline to landline (0.0027 cents a minute).
CMIIW.
Speedy1205 said:
Hey together,
still trying like grazy to get on my Xperia X1 VOIP up and running with the native client (dont want frings, skyoe etc.) and I was reading allready pages with the stuff but some got it up and running. But nowhere wich driver to use etc. I come till -> NO Services
Anyone it up and running on Xperia X1 ? I user Valkyrie_v1.2 WWE Black Edition- wm6.5 21232+topaz ROM
Please let me know what to do
Thanks
Click to expand...
Click to collapse
Ok ... you're lucky i spent one whole day to figure out the best for the windows mobile native sip and here is the easiest way to have it
1. Download and install http://anonym.to/?http://www.minitelecom.org/downloads/images/voip/WM6VoIPFull.cab
this packages is the LATEST package of native windows mobile sip and installs drivers sip configuring utility ... from the configuring utility u can choose also to make calls over 3g.
2. download and install audioroute http://www.freewarepocketpc.net/mirror/audioroute_1.2.020.cab
this is freeware to route the audio through your internal speaker
after this go to settings ->phone->internet and choose always when available.
Good luck
Youre done....
harveydent said:
Do I understand correctly that this lets you call a landline for free? Since you mentioned that Skype, et al. were more expensive than landline to landline (0.0027 cents a minute).
CMIIW.
Click to expand...
Click to collapse
if you register at 12voip.com, and you buy credits worth 10 euro's you can call selected landlines for free for up to 90 days, afer 90 days, top up with another 10 euro;'s and you are good to go for another 90 days.
Please do look if your country or desired destination is on the call for free list.
@ Informatico: Does GPS still work after this??
Thx
I installed it,
I have a question , how to make calls via it?
Like after enabling 3G and enable SIP Plan, how i can make calls now?
Like if i dial a number it will automatically be a SIP call?
MyMichelle said:
@ Informatico: Does GPS still work after this??
Thx
Click to expand...
Click to collapse
Yes sure
JYousuf said:
I installed it,
I have a question , how to make calls via it?
Like after enabling 3G and enable SIP Plan, how i can make calls now?
Like if i dial a number it will automatically be a SIP call?
Click to expand...
Click to collapse
If you enable the today plugin, go to settings>today>choose internet calling, on the today screen it'll say either: service not available(wich means is not available and you might not have the settings correct), or available(wich means it's available but not in use yet), or selected, wich means, voip/sip calling is selected and every call or sms will be made through sip. At least, that was in my case, what was a bit annoying because I didn't want every single call i made was trough voip, only the landlines because i can call it for free, so i searched for a softphone and found one wich is an application that let's you make voip calls only within that application, so you could still make regular calls without the hassle of the previous mentioned option. though the latter is not free, but it's name is 'AGEphone Mobile".
I installed it, VoIP works fine but my GPS doesn't work anymore, don't no why.
Any Ideas to fix this problem so that i can use both VoIP and GPS??
MyMichelle said:
I installed it, VoIP works fine but my GPS doesn't work anymore, don't no why.
Any Ideas to fix this problem so that i can use both VoIP and GPS??
Click to expand...
Click to collapse
well, that's pretty odd then... my gps works just fine, no problems at all. Do you have programs installed to fine tune your device? did this only occur since you've been using voip?
Til yesterday it worked....
But after I had installed the cab it was dead.
I use XperiaTweak I don't know if that coul be the reason for my problem?
i don't use xperia tweak, so i don't know if that;s the probem, though it would be very strange if that gave problems, but have you tweaked som gps settings or agps settings? your gps doesn't work at all anymore,not a iny tiny bit?
i suggest try to save your xperia tweak profile, if it can be done, then revert to default settings and try gps again, otherwise, i don't know. If i were you i hard reset it, but that's just me, since i flash my device often.