I updated my audiovox xv6600 with a newer rom update and microsoft active sync failed during the rom update. Now all the screen says is serial v1.02. I know this is bootloader mode but the OS wont boot. How can I fix this?
noleafclover said:
I updated my audiovox xv6600 with a newer rom update and microsoft active sync failed during the rom update. Now all the screen says is serial v1.02. I know this is bootloader mode but the OS wont boot. How can I fix this?
Click to expand...
Click to collapse
ttt
12345678910
Just reflash the ROM, ExtROM, and Radio.
Moving to Blue Angel.
92GTA said:
Just reflash the ROM, ExtROM, and Radio.
Click to expand...
Click to collapse
how do I do that if active sync wont connect?
You don't use activesync to flash a device, that's why. Leave it in bootloader mode, plug it into the USB on the computer, and run the upgrade utility. That's it.
It says I need an active sync connection to do it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That doesn't make any sense because the ROM updater disables AS and puts the phone into bootloader mode to do the update. Just click next...
noleafclover said:
It says I need an active sync connection to do it.
Click to expand...
Click to collapse
Gah, can you resize the image next time? That was a bit big.
And if you look at the message, it does say that you need the activesync connection, it says to make sure your device is synced with your computer using activesync. That's just basic data loss prevention.
Related
Today I've been trying to update my Trinity's Radio ROM to v1.50 or v1.56 and my phone doesn't seem to be accepting ROM upgrades anymore?!
When I try to flash the ROM, my phone's screen goes into the bootloader (the red, green and blue screen.. correct?) and I hear my PC make the USB device disonnected sound and then it reconnects, making the reconnection sound and it says "USB" in the white part at the bottom of the phone's coloured display.
So I get this screen but it gets stuck on 0%:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then after about 30 seconds this comes up:
My phone stays in bootloader mode until I turn it off then back on again (soft reset).
The phone turns back on and I can use it like normal.. but it is still the old ROM obviously because it didn't update.
I've upgraded the ROM many times before.. so why would ROM upgrading suddenly not work anymore?
Suggestions anyone?
Before you get techy!!
Hi there - I had the same problem this eve - reflashed tonnes of time sno worries then all of a sudden nothing.
Before, like me you scour the forum for the techy solution (reinstall activesync, muck with SPL, copy things to SD card) go dig out some USB cables.
I've found that it was a dodgy cable that works for everything else.
So if you get this error and your white strip in bootloader says serial - go get another USB cable first!!!!
Cheers
i get this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i get this in the device properties....and it will not boot past the white m symbol
please help
anybody ? please
I'm pretty sure I've had this and just went through with flashing anyway. Maybe I'm mistaken and if you don't want to risk it, wait for more opinions.
What's happening when you choose a *.sbf for flashing?
Zatapatalkowane z MotoStone'a
i tried flashing anyway but still the device doesn't pass the white m symbol
Which drivers do you have?
BooZon said:
Which drivers do you have?
Click to expand...
Click to collapse
the lastest..
do you have a different pc to try it on? rsdlite works on my laptopn while it doesnt really work on my moms for some reason. id try it on a different pc first. next i'd like to know what sbf file your trying to flash. it could be corrupt or something, try a test with another sbf file like from peter alfonsos site and see if it works.
***wow, apparently i have to wait 5 whole minutes before posting becuase im apparently a "new" user whos been here since may of 2010... i guess i should crank out more posts heh? (looks at watch, seems to be January 2 of 2012 )
You won't be able to initiate the flash process until the phone boots directly into bootloader mode, which involves a mostly black screen with small white text. Keep trying while holding down the proper buttons and you should be able to get there.
hi guys
i was converting my htc one to google edition
see image below its show step by step
what was i doing...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after that tried to reboot my device but!
its show noise screen
cant access bootloader or anything
please help me, thanks.
Your attempt to change the mid did not stick. Gotta get that first for mid check to pass
Sent from my HTC One
gusto5 said:
Your attempt to change the mid did not stick. Gotta get that first for mid check to pass
Sent from my HTC One
Click to expand...
Click to collapse
Yes, I realized after the device stops..
i have fixed the problem :laugh:
pls tell us how you fix it!!
andreik said:
pls tell us how you fix it!!
Click to expand...
Click to collapse
turned on the device
it show noise screen
i connect the device with pc via usb
using CMD, checked "ADB devices"
but nothing done no device found
checked "fastboot devices"
and cheers htc one found
changed MID and flashed RUU google play edition
and Praise be to Allah
problem solved
device now running with stock android and i have recieved OTA update.
if you want to convert your htc one to stock google play edition
with OTA updates... http://goo.gl/L4uzTW
My searches are coming up empty and the fastboot restore isn't working. Is there any unbrick method if the device is booting to the tux logo only?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sul7en said:
My searches are coming up empty and the fastboot restore isn't working. Is there any unbrick method if the device is booting to the tux logo only?
Click to expand...
Click to collapse
So no fastboot, that's bad, have checked whether "deep flash cable" could help? If you have fastboot surely it has to work, did you follow the guides. Disable driver signature in windows and all that. How did you get the tux LOGO, did you flash wrong ROM.
jazz452 said:
So no fastboot, that's bad, have checked whether "deep flash cable" could help? If you have fastboot surely it has to work, did you follow the guides. Disable driver signature in windows and all that. How did you get the tux LOGO, did you flash wrong ROM.
Click to expand...
Click to collapse
failed auto update. anything I can do with this screen: https://i.imgur.com/huZyA2f.jpg ?
Sul7en said:
failed auto update. anything I can do with this screen: https://i.imgur.com/huZyA2f.jpg ?
Click to expand...
Click to collapse
You are going to have to provide more information of what you did to get to this point. Miui site will have answers for this problem. Were you updating from updater app on phone? Do you TWRP installed ? Have you tried mi flash tool?
Anything here help
http://en.miui.com/thread-465098-1-1.html
Hi,
I just got a new Chromecast Ultra wand wanted know whether there is anything I need to take care off before I connect it to the Internet and le tit update itself to the latest firmware.
Are there any root or jailbreak methods for the Ultra that require an older firmware or is it safe to let the chromecast update itself to the latest firmware?
Spamm00r said:
Hi,
I just got a new Chromecast Ultra wand wanted know whether there is anything I need to take care off before I connect it to the Internet and le tit update itself to the latest firmware.
Are there any root or jailbreak methods for the Ultra that require an older firmware or is it safe to let the chromecast update itself to the latest firmware?
Click to expand...
Click to collapse
Hey, i also got my bundle, sadly i couldnt find anything about it only some open source stuff.
One thing that i've noticed though is, when you hold press on the button on the side for 10 seconds or so, it will show up on Windows as an device for 2 or 3 seconds. Here is a screenshot from it:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Maybe someone can figure out how to access the device with this, maybe there is somewhere a driver to access it via something.
PS: Do not update it, maybe they fixed something in the later versions.
EDIT: There is actually a driver for it: https://github.com/torvalds/linux/blob/master/drivers/pinctrl/berlin/berlin-bg2cd.c
And what can we do with this driver?
Spamm00r said:
And what can we do with this driver?
Click to expand...
Click to collapse
Probably flash or access stuff if it isn't locked. Don't have something right now that is setuped to try it with linux.