Hi everyone.
Ive got a MAJOR Problem here.
My Cell Phone doesnt start at all.
If i put it one the USB Cable it can Start up like 5 Seconds.
Then it Reboots and Reboots again and again by 5 Seconds.
If I Disconnect the Phone from USB screen turns Black Immediately...
I thought it could be the Batterie... but.. it worked just fine yesterday..
(have i Mentioned that this weird Sticker on it turned red..? Some kind of sign saying me it got wet?)
All this started as i got a Coloured screnn with saying ´´Serial´´ @ the bottom of the Screnn... just exact like the Flash Screen
I Flashed the Rom which is on the Internal Storage i put bevor. To bad it aint the Stock ROM!
Then i also tried Hard Reset.
But everytime i boot... i only get as far as 5 Seconds.
Is there any Chance to Flash this Baby with original ROM (Stock ROM, RADIO and SPL)
I want to send that Baby in... but if they find out i Flashed it... i wont get any Warranty... ;(
So PLEASE GIVE ME ANY ADVICES!!!!!
Try to flash with the original ROM. Go to HTC homepage-support, download the ROM and flash. It may help...
krisztian b said:
Try to flash with the original ROM. Go to HTC homepage-support, download the ROM and flash. It may help...
Click to expand...
Click to collapse
You only can Flash if u got a Active Sync connection.
So ... Cell cant boot... i cant flash...
HELP
Just go into bootloader mode (you have Hard SPL installed right?) by booting up the phone while holding down the volume down key. Then connect it to the pc with the USB cable and run the CustomRUU to flash another rom. Should work! Else you should try to MTTY (that solves the resetting stuff right?).
I was just about to say to try to get Diamond into bootloader mode manually. http://forum.xda-developers.com/showthread.php?t=405659
MTTY wont work... cause i cant boot at all
But THX for your help flashing it back to Original...
This Thread can be closed
1. When i plug my usb cable and transfer files using them,then I turn off usb and unplug it from phone then xperia has black screen and freeze. 2. after batery calibration (I think) on every restart or shutdown my phone freeze on cyanogen mod 7 animation and not happened,but somethimes when touch my screen then appear pin and keyboard. Sorry for my english. has enyone know to fix it? i do full wipe
What ROM and wich version do you use?
And you tried do a full wipe?
cust0m said:
What ROM and wich version do you use?
And you tried do a full wipe?
Click to expand...
Click to collapse
dude..cant u see his title?he using a ROM called GingerDX..
@scorpion 21:
have u try full wipe?coz mine just working fine..
Using GingerDx i do full wipe that problem i had with froyobread too. I mybe some kind of bug
Full-wipe is not the answer to anything people!
Hey guys,
i got the same problem.
I tried to run the following rom on my phone: http://forum.xda-developers.com/showthread.php?t=1188486 (latest version v009) and after i "installed" the rom, it wont start in the right way.
The phone is always freezing on the cyanogen mod 7 screen...
I got the same problem on the froyobread release too ;/
Maybe there s someone who know how to fix it?
The problem was for me too. But when I connected phone, not only it turned black, it rebooted and i saw bootanimation, and that was a loop od 3 times. I fixed it with Manager permissions option, try it, maybe it will be usefull, I don't know.
May be because you use a theme which is installed on sd card.
Sent from my X8 using XDA App
Can someyone tell that to doxianh?
I found how to fix black screen on usb only: when connect your phone (turn on storage function) transver files and do what you want,then in windows find your device or sd card right click on it and click ,,eject'' then on phone press ,,turn off usb storage'' and then just remove cable and screen will be automatically loaded try
scorpion 21 said:
I found how to fix black screen on usb only: when connect your phone (turn on storage function) transver files and do what you want,then in windows find your device or sd card right click on it and click ,,eject'' then on phone press ,,turn off usb storage'' and then just remove cable and screen will be automatically loaded try
Click to expand...
Click to collapse
You must always click eject whenever disconnecting any kind of external storage (sd, usb...)
I know that,but if I press back button when cable is connected everything freeze
Full wipe and battery reset solved my problem ;=)
hi, i have a problem: I use gingerdx 009 and sometimes it ask me for PIN unlock operator; i click "exit" and the x8 starts normally.. why?
Thats hapens to me because we have moded xperia to work on 1 mobile operator but rom like gingerDX support it much more just ignore thst
Sent from my X8 using XDA App
When I just installed the GingerDX ROM I had the freeze on animation problem, and it gones with a full-wipe just after the reinstallation of the ROM, you might try install the custom zip and do a full wipe before restart from xrecovery
for the USB problem, as the last post, you have to use safe eject before turn off USB massibe storage from the phone
I have been frustated by d problem my
ace gives! Suddenly my phone freezes
and d touch nd soft keys dont work and
after charging nd wen it starts to
discharge it works! Wat kind of problem
my phone has? Someone please help
me out to get rid of it!
Maybe you should reset or flash stock ,
Ps: don't foget to back up.
Sent from my GT-I9300 using Tapatalk 2
Tried as many wipe as possible... Now using cm10
Hello.
I have Bought Xolo A500S before 2 Weeks.
Everything was Perfect and in well manner.
I have tried to install chainfire 3d on it. A dumb step cos it doesn't support Jellybean.
My Phone hanged at Boot logo. The Device Gone into softbrick.
However, I found Stock Rom to Flash over my Phone. I flashed Stock Rom of Xolo A500S but then It gone into Hard Brick. It doesnt even boot up and show logo.
I found a thread somwhere over XDA that I can install ROM that is similar to my Phone Specs.
I searched around Net and Found that Xolo A500L have same Specs but camera.
I Flashed Xolo A500L Rom on my Xolo A500S.
Voila, It started like charm.
Then, I tried to Flash my Xolo A500S Rom back but without Preloader.bin as I thought it was causing Problem.
So I Flashed it using SP Flash tool and deselected Preloader.bin, and Flashed it.
And My Device Started Working again.
So, The Current state is My Xolo A500S have Preloader.bin of Xolo A500L but everything else is of my Phone.
The Only Problem I facing is The Bluetooth, Gps, Wifi, FM Radio doesn't working after The Phone started.
Looks Like everything that is Controlled Wirelessly that Doesn't working.
When I click on Wifi or Bluetooth to Start, It slides to On Stage, But in second it Returns back to Off stage.
Please Help Guys, I want my Bluetooth, GPS, WIFi, FM Back.
Thx In Advance,
DKill
Baseband
I found that there is mismatch of baseband and my RIL, Can you please help out to find my matchig RIl and Baseband?
It will be very helpful.
Please Provide modem.zip file for my Phone. It will workout too.
Update
I have Installed Stock ROM back and Everything started working but not as I wanted.
The Phone hangs at boot logo, BUT BUT BUT,
The Wifi, GPS, Bluetooth, Radio works when tested on Factory mode.
Now Everything is working but phone isn't starting.
Any Suggestion?
If I Factory Reset from Recovery Menu, Phone does start but all 4 features listed above stops working.
Help Needed. I am new to Android.
I guess something is wrong with /data /cache.
What do you think?
Please Advice something how I can fix it?
Please...
Fixed
Problem got fixed by Hard Reset.
DKillWorld said:
Problem got fixed by Hard Reset.
Click to expand...
Click to collapse
how to make hard reset ??please help even im facing same problems like wifi,bluetooth,gps n radio ...please help
rak1610 said:
how to make hard reset ??please help even im facing same problems like wifi,bluetooth,gps n radio ...please help
Click to expand...
Click to collapse
1)First of all, Go to android recovery menu by holding Power and Volume up key when phone is off.
2)Then clear cacha, and do factory reset.
3)Restart your phone.
4)There will be something userdata_XXXX_XXX.backup file in your phone memory after restart..(X is random numbers) ( If that file is not there, Tell me, I'll upload it here)
5)Turn off the phone, Go to recovery menu again.
6)In recovery menu select Restore userdata/Restore data, and select the file located in your phone memory. Select it, Let it finish restoring.
7)Its done, restart your phone and everything should be working fine.
plz upload userdata xxxxx backup
wifi blutooth not working
DKillWorld said:
1)First of all, Go to android recovery menu by holding Power and Volume up key when phone is off.
2)Then clear cacha, and do factory reset.
3)Restart your phone.
4)There will be something userdata_XXXX_XXX.backup file in your phone memory after restart..(X is random numbers) ( If that file is not there, Tell me, I'll upload it here)
5)Turn off the phone, Go to recovery menu again.
6)In recovery menu select Restore userdata/Restore data, and select the file located in your phone memory. Select it, Let it finish restoring.
7)Its done, restart your phone and everything should be working fine.
Click to expand...
Click to collapse
after flashing through cwm my wifi and blutooth is not working, even there's problem in factory board test.
what to do??
will your userdata file can help?
DKillWorld said:
1)First of all, Go to android recovery menu by holding Power and Volume up key when phone is off.
2)Then clear cacha, and do factory reset.
3)Restart your phone.
4)There will be something userdata_XXXX_XXX.backup file in your phone memory after restart..(X is random numbers) ( If that file is not there, Tell me, I'll upload it here)
5)Turn off the phone, Go to recovery menu again.
6)In recovery menu select Restore userdata/Restore data, and select the file located in your phone memory. Select it, Let it finish restoring.
7)Its done, restart your phone and everything should be working fine.
Click to expand...
Click to collapse
broo pls upload that userdata backup for me pls ...
I will b very helpful if u do it for me ...
DKillWorld said:
Hello.
I have Bought Xolo A500S before 2 Weeks.
Everything was Perfect and in well manner.
I have tried to install chainfire 3d on it. A dumb step cos it doesn't support Jellybean.
My Phone hanged at Boot logo. The Device Gone into softbrick.
However, I found Stock Rom to Flash over my Phone. I flashed Stock Rom of Xolo A500S but then It gone into Hard Brick. It doesnt even boot up and show logo.
I found a thread somwhere over XDA that I can install ROM that is similar to my Phone Specs.
I searched around Net and Found that Xolo A500L have same Specs but camera.
I Flashed Xolo A500L Rom on my Xolo A500S.
Voila, It started like charm.
Then, I tried to Flash my Xolo A500S Rom back but without Preloader.bin as I thought it was causing Problem.
So I Flashed it using SP Flash tool and deselected Preloader.bin, and Flashed it.
And My Device Started Working again.
So, The Current state is My Xolo A500S have Preloader.bin of Xolo A500L but everything else is of my Phone.
The Only Problem I facing is The Bluetooth, Gps, Wifi, FM Radio doesn't working after The Phone started.
Looks Like everything that is Controlled Wirelessly that Doesn't working.
When I click on Wifi or Bluetooth to Start, It slides to On Stage, But in second it Returns back to Off stage.
Please Help Guys, I want my Bluetooth, GPS, WIFi, FM Back.
Thx In Advance,
DKill
Click to expand...
Click to collapse
how did you flashed???? the rom when phone wasent booting up????
DKillWorld said:
1)First of all, Go to android recovery menu by holding Power and Volume up key when phone is off.
2)Then clear cacha, and do factory reset.
3)Restart your phone.
4)There will be something userdata_XXXX_XXX.backup file in your phone memory after restart..(X is random numbers) ( If that file is not there, Tell me, I'll upload it here)
5)Turn off the phone, Go to recovery menu again.
6)In recovery menu select Restore userdata/Restore data, and select the file located in your phone memory. Select it, Let it finish restoring.
7)Its done, restart your phone and everything should be working fine.
Click to expand...
Click to collapse
upload backup file plzzzz :crying:
Upload userdata_XXXX_XXX.backup file
Please update below file file because my phone bluetooth and wifi is not working.....I am waiting for your reply.....
DKillWorld said:
1)First of all, Go to android recovery menu by holding Power and Volume up key when phone is off.
2)Then clear cacha, and do factory reset.
3)Restart your phone.
4)There will be something userdata_XXXX_XXX.backup file in your phone memory after restart..(X is random numbers) ( If that file is not there, Tell me, I'll upload it here)
5)Turn off the phone, Go to recovery menu again.
6)In recovery menu select Restore userdata/Restore data, and select the file located in your phone memory. Select it, Let it finish restoring.
7)Its done, restart your phone and everything should be working fine.
Click to expand...
Click to collapse
Shahed.RedaArKZ said:
broo pls upload that userdata backup for me pls ...
I will b very helpful if u do it for me ...
Click to expand...
Click to collapse
Ihave flashed oppo colors os in my xolo a500s. but now wifi and bluetooth are working.
when i turn on the wifi, it gets turned of within a second.
pls help me out.
hi friends,
A few days back i rooted my xolo a500s ips using framaroot and also installed supersu.I wanted to upgrade my android phone to lollipop so i downloaded update zip from this Download Link-https://iop.li/UTw and update zip is Android_l_v2.5_NonIPS_Pranav.zip (231M)
since i had to download cwm recovery,i downloaded recovery.img and flashed it using flashify app(got it through playstore),
cwm got installed successfully.then i booted my phone using cwm and choose to install update zip.Now it says that update is complete.then i tried to reboot but it switches on and off.xolo logo(boot logo)appears for few seconds and disappears.this continued for half a day but did not boot completely.
Now what should i do?i am dead without phone