trying to fix WM6 sound glitch - MDA III, XDA III, PDA2k, 9090 Software Upgrading

i see on wiki where it says to do the registry hack, but how do i do that? what is envolved in doing a registry haack? how do i get started? i have not been able to find any posts/threads on how to actually do one. thanks

spunk32 said:
i see on wiki where it says to do the registry hack, but how do i do that? what is envolved in doing a registry haack? how do i get started? i have not been able to find any posts/threads on how to actually do one. thanks
Click to expand...
Click to collapse
You need a registry editor.
Look for PHM RegEdit. It's a free editor. Works a treat as well.

thanks i got the program, but i cant find "hklm/drivers/sdcard/clientdrivers/class/sdmemory_class". i tried doing the search from "my device". nothing comes up. anyone know how i can fix this sound glitch as described in WIKI? thanks

ok, i found it and seems to have done the trick. are there any more registry "tweaks" that i should be aware of that will help improve my BA?

Related

All messages open at end of message. Please help...

I'm using an AT&T Tilt with the default ROM, no modifications, just added software. My text and email messages are opening at the end of the message. The scrollbar is scrolled all the way down. On really long messages, like long emails, it won't be scrolled all the way to the end, but down quite a ways. Does anyone know what might be causing this, or how to fix it. Any help would be greatly appreciated. Thanks...
did ya install kaisertweak? I read somewhere on this forum that that tool is causing that problem
No, I haven't installed that. But thank you for asking. I may check those references and see if anyone with that problem has found a solution...
try this , and please let us know!
http://forum.xda-developers.com/showthread.php?t=337968&highlight=messages
That was it. Thank you for pointing me in the right direction! Your original hunch was probably correct. I haven't installed that program but I did manually edit the registry to do that tweak. I didn't even think it was relevant cause I thought it only affected PIE. Looks like I have lots more reading to do at these boards. Thanks again for your help, and quick response...
I posted this in another thread, I have the Tweak installed on my Tilt and have the 4-Way Nav already set to 1. It still does this, very annoying. Any other suggestions?
didn't work on my HTC TyTN II either the suggested registry value value was already 1. I've been fiddling with KaiserTweak earlier.
working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
patr!k said:
working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
Click to expand...
Click to collapse
What did you do? Please do share!
TheFuzz,
just follow this hint
patr!k said:
TheFuzz,
just follow this hint
Click to expand...
Click to collapse
Yea, been there, done that, still no luck. The default was already set to "1" so it must be something else. The investigation continues.
TheFuzz said:
Yea, been there, done that, still no luck. The default was already set to "1" so it must be something else. The investigation continues.
Click to expand...
Click to collapse
Same here. Did you find anything?
jahnotto said:
Same here. Did you find anything?
Click to expand...
Click to collapse
Nothing new, so I use Pocket CM now to do my texting, works much better anyways and has threaded messaging!

How to change the main menu soft button?

Hi,
I have a Treo 750v (Vodafone version) which like what it's box said it is meant for email solution, that's why the left soft menu of the Today screen menu is set to Email.
Anyone know how to change this?
Thanks, appriciate your share of knowledge!
I forgot the details but this i know as much
You have to download the register editor program. Search around the registry is all the same when it comes to changing soft key for all WM phones.
The only problem with the Treo 750 is when you change the softkey from email to something else it ends up adding an extra short cut. So in essence you are not overwriting that key, all you are doing is adding an extra feature on top of the existing email button.
Maybe someone had better success than I did can chime in
Using a registry editor, navigate to Hkey_Current_User/Software/Microsoft/Today/Keys/112
Change all 3 values to reflect your new function
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
awesome!
mtiberio said:
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Click to expand...
Click to collapse
wow, thank you very much mtiberio!
your link really hit the spot!
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
tinyflier said:
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
Click to expand...
Click to collapse
It's all because Palm plugins - they overlay it. If you disable Active Call (or Dial Lookup?) you can have native-windows softkeys. It was all described in instructions how to ged back default dialpad.
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
was it:
"FdcSoft SoftkeyAppletEx.cab"
Gyngabread Man said:
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
Click to expand...
Click to collapse
it would be great if you share the file or where you get it, so we all can get it too...
mtiberio said:
was it:
"FdcSoft SoftkeyAppletEx.cab"
Click to expand...
Click to collapse
it is caled softkeyapplet but its not a cab it was a zip i just unzipped and put in my windows folder i believe... i will look in my external driveand post it im not sure where it is but i'll try to find it
ok i found it on my drive but i did some searching on the forums and alot of ppl mention it but dont upload it and im guessing its for good reason... dont wanna piss ppl off by posting something i shouldent if its ok though then i'll do it but i think its the same one your talking about for me it worked like a charm no reg editing
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Chillin said:
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Click to expand...
Click to collapse
Hi, thannks for the direct links. I'm going to try installing it. i hope it'll be fine.
seems it doesn't work with wm6. after installing it, the program isnt available in my program.

Install/Run untrusted application - final solution?

Hello,
For the past few days the (from what I gather) well-known problem of not being able to install or run an 'untrusted' application has been plaguing me. However, I've been searching here and googling around for a long time now with no result...
Been using Dutty's 5.2.19199 (WM6.1) and I really didn't change any setting! So what gives? Any ideas?Basically, how do I get the prompt back (the one during installation)?
Thanks in advance!
T
krakout said:
Hello,
For the past few days the (from what I gather) well-known problem of not being able to install or run an 'untrusted' application has been plaguing me. However, I've been searching here and googling around for a long time now with no result...
Been using Dutty's 5.2.19199 (WM6.1) and I really didn't change any setting! So what gives? Any ideas?Basically, how do I get the prompt back (the one during installation)?
Thanks in advance!
T
Click to expand...
Click to collapse
Check your registry settings! Use KaiserTweak or Schaps' AdvanceConfig!
Yes, I know it must be something in the registry, but what? And, I thought of Tweak and AdvanceConfig but -guess what? They're not authenticated! Argh!
krakout said:
Yes, I know it must be something in the registry, but what? And, I thought of Tweak and AdvanceConfig but -guess what? They're not authenticated! Argh!
Click to expand...
Click to collapse
If you are technical, try this: Download KaiserTweak's latest XML file and open the file in Notepad. Then see what registry key(s) is(are) modified for this tweak.
Ah now - that's a great idea! But, do you know of any PC-based registry editor, since I cannot install one on my TyTNII?
If you're really technical, you can follow through with cmonex's way found here.
If not, search for dot fred task manager, which includes a great *FREE* registry editor amongst other tools, much better than PHM Reg Editor, imo....
Whoa, thanks a bunch. I'll try the task manager first (found here, btw), but I'm not sure if I'll be able to run it either - the whole system seems VERY restricted! I'll try to make heads from tails with the instructions in the other thread. Thanks so much!
Btw, I do seem to remember a program that allowed you to edit the PPC's registry from Windows PC, anyone remember that?
Thanks again guys - much, much appreciated!
You can run the untrusted app, i.e. Advanced Conig. Just select yes. Then make the changes.
BTW, to view the xml, just Open notepad on pc & drop the xml in the notepad window.
No I can't that's my problem - it just flat refuses to run it, it doesn't give me the prompt.. that's why I'm asking for a PC-based registry editor!
Anyhow, I'll try it today and will let you know if I manage it!
krakout said:
Ah now - that's a great idea! But, do you know of any PC-based registry editor, since I cannot install one on my TyTNII?
Click to expand...
Click to collapse
http://www.pocketpcfreewares.com/en/index.php?soft=1399
Here is another PC based mobile registry editor. Simple to use and works well. Havent found any serious problems with it
Yes, I'm trying this right now
Btw, the registry setting seems to be:
HKLM\Security\Policies\Policies\0000101a
Value=1: disabled
Value=0: enabled
Desc.:Enable or disable the warning you get when opening a program that is not digitally signed
A small cab to disable signing-security: Download: http://www.PocketPC-Live.com/ds.cab
Try it and let me known..
Carty said:
A small cab to disable signing-security: Download: http://www.PocketPC-Live.com/ds.cab
Try it and let me known..
Click to expand...
Click to collapse
The problem with this cab (and another one I had found) is that, once the mobile goes berzerk, you can't install it because, of course, it's unsigned... Catch 22! Thanks anyway - and, by the way, superb site, added to my RSS aggregator at once!
Anyhow, I just applied the reg tweak (set to 0), reset, thing asks me to verify running unsigned start-up programs, I OK them, and then... still same problem! What the heck? There doesn't seem to be any other tweak...
krakout said:
..by the way, superb site, added to my RSS aggregator at once!
Click to expand...
Click to collapse
Thank you My pleasure to serve the pocket pc community..
krakout said:
Anyhow, I just applied the reg tweak (set to 0), reset, thing asks me to verify running unsigned start-up programs, I OK them, and then... still same problem! What the heck? There doesn't seem to be any other tweak...
Click to expand...
Click to collapse
It has to be set to 1 for disabling.. You set to 0?
Regards,
Carty..
Yes, I set it to 0; it was set to 1 (probably an earlier KaiserTweak session), but I actually wanted to get the prompt so that I could tell it that f*cking yes, I want to run/install the app!
Anyhow, been switching between 0 and 1 with no effect... Feel a hard reset coming on, but it's weird because I've found quite a few posts around (not necessarily here) and no solution...
Got the same problem after a white screen after hardspl, but changing the registry worked for me. Thanks, now I can try jumpspl.

Backlight Fix Non-KaiserTweak Method (need)

Hi,
I want to fix the fast screen backlight issue on my Tilt w/o using Kaiser Tweaks. I've done it before, but I can't seem to find the website that listed the regsitry key that needs editing. I've searched this forum extensively as well as google but everything points to Kaiser Tweaks. I want to avoid having to use KT as I'm comfortable with editing the registry. So if someone would be so kind as to post the instructions here, that would be great. Once here, maybe should be transfered to the Wiki?
Thanks in Advance!
T
hksuper said:
Hi,
I want to fix the fast screen backlight issue on my Tilt w/o using Kaiser Tweaks. I've done it before, but I can't seem to find the website that listed the regsitry key that needs editing. I've searched this forum extensively as well as google but everything points to Kaiser Tweaks. I want to avoid having to use KT as I'm comfortable with editing the registry. So if someone would be so kind as to post the instructions here, that would be great. Once here, maybe should be transfered to the Wiki?
Thanks in Advance!
T
Click to expand...
Click to collapse
If you download Kaiser Tweak (wait for it, don't flame me yet...) and open the XML file that comes with it, you can ascertain what keys are modified by the application and then do them yourself.
I've done this before to get the keys for my Provisioning XML files.
EDIT:
Anyone can contribute to the Wiki, so feel free to add any information you deem relevant.
Ta
Dave

Change "Notes" Application on dialer

Hi to you all. I wonder if anyone could help me, as i can´t find any help on older threads. On dialer there´s a button "Note". During call, if clicked, take us to, i guess, standard WM Notes application. How can i change this shortcut to Screenwriter or Apmemo?
Thanks,
C´mon guys this is not a hard one I suppose. Or is? Regards.
Dump the M$ app and rewrite it the way you want ?
denco7 said:
Dump the M$ app and rewrite it the way you want ?
Click to expand...
Click to collapse
lol or look through reg @ phone settings mind you i think it's hardcoded "but could be wrong"
New htc song plays in background while placed on hold
You both are not helping at all. I read somewhere that the spirit/goal of this forum is not that kind of behavior.
I don´t need standard notes at all. I think that if i can find the executable and the parameters of the link on the button, i can replace it with a shortcut or even a mortscript.
Anyway thanks for your reply as now i know you both can´t help.
Regards.
Um so the look through the reg for phone doesn't help?
It's not going to be a .lnk and as previously stated the button will most probably be hardcoded.
Looking throu reg finds nothing also i doubt another software would follow the default format of note.
So my hunch says no you cant.
I can´t find a clue on registry. Thanks Stylez.

Categories

Resources