Hi there,
Has anyone made a TMC device working on the Athena?
I tried some version of the GNS FM9 adpaters but nothing worked.
Any ideas?
Thanks in advance for your help!
Have a good start into 2008.
greetz,
DAx
I agree - this would be very useful. I have iGo on my Ameo and it is brilliant (cant wait for iGo 8 or MioMap 2008 for the 3d visuals and road names) but it would be even better if I could get warned of upcoming hold ups on the major roads!
adamelphick said:
I agree - this would be very useful. I have iGo on my Ameo and it is brilliant (cant wait for iGo 8 or MioMap 2008 for the 3d visuals and road names) but it would be even better if I could get warned of upcoming hold ups on the major roads!
Click to expand...
Click to collapse
Hi,
just a question from my side:
I'm currently using igo with my Ameo and I have to wait and wait and wait and wait for the first GPS fix. It takes normaly between 5 and 15 Minutes until the first fix, even if I use the Quick-GPS Tool that comes with the Ameo. After that, everything works fine. How long does it take with your device and igo?
If I use my GNS GPS receiver (http://www.gns-gmbh.com/de/30_5843.php) I need only a few seconds until the first fix. And it supports TMC!!! I've searched a lot around to find another / cheaper solution to use TMC with the integrated GPS receiver, but I didn't find a working solution, so i decided to buy the GNS GPS receiver....
Regards
Andreas
AndreasF said:
Hi,
just a question from my side:
I'm currently using igo with my Ameo and I have to wait and wait and wait and wait for the first GPS fix. It takes normaly between 5 and 15 Minutes until the first fix, even if I use the Quick-GPS Tool that comes with the Ameo. After that, everything works fine. How long does it take with your device and igo?
If I use my GNS GPS receiver (http://www.gns-gmbh.com/de/30_5843.php) I need only a few seconds until the first fix. And it supports TMC!!! I've searched a lot around to find another / cheaper solution to use TMC with the integrated GPS receiver, but I didn't find a working solution, so i decided to buy the GNS GPS receiver....
Regards
Andreas
Click to expand...
Click to collapse
Hi Andreas,
hmm... thank for the link. That would be really the last chance to get TMC working for the ameo.
FYI, I use Mobile Navigator 6 and it fixes the gps signal really quick. I also use the Quick GPS and when I start MN6 the GPS signal fixes within 1 minute.
Greetz,
DAx
AndreasF said:
Hi,
just a question from my side:
I'm currently using igo with my Ameo and I have to wait and wait and wait and wait for the first GPS fix. It takes normaly between 5 and 15 Minutes until the first fix, even if I use the Quick-GPS Tool that comes with the Ameo. After that, everything works fine. How long does it take with your device and igo?
If I use my GNS GPS receiver (http://www.gns-gmbh.com/de/30_5843.php) I need only a few seconds until the first fix. And it supports TMC!!! I've searched a lot around to find another / cheaper solution to use TMC with the integrated GPS receiver, but I didn't find a working solution, so i decided to buy the GNS GPS receiver....
Regards
Andreas
Click to expand...
Click to collapse
Hi Andreas,
can you confirm that the GNS 5843 TMC work on the X7500 with Igo.
Thanks
Gigino
gigino said:
Hi Andreas,
can you confirm that the GNS 5843 TMC work on the X7500 with Igo.
Thanks
Gigino
Click to expand...
Click to collapse
Yes i.e. it works on my T-Mobile (Germany) Ameo with igo,
Cheers
Andreas
AndreasF said:
Yes i.e. it works on my T-Mobile (Germany) Ameo with igo,
Cheers
Andreas
Click to expand...
Click to collapse
Hey Andreas,
sorry to trouble you again but we are using the igo plus and the same gps as you the GNS 5843 but we can get the gps to work but not the TMC everytime we try to connect the TMC the pda just frezzes like the port has a conflict.
We have only been trying this in landscape mode can you tell me in which mode you are using the igo Portrait or Landscape.
Please can you help me in get this to work because I really like the Igo plus more the any anothe navigators.
Thanks
Gigino
Hi Gigino,
hmmmm, strange, for me it works. And yes, I'm using the landscape modus.
Sounds for me, that Igo uses the internal GPS receiver an tries to find a TMC connection on this internal GPS receiver.
Some Ideas from my side:
If you connect the GNS receiver via bluetooth, which serial port do you use? I've configured the bluetooth settings and then the COM-connections (I hope this are the right terms, I'm using a german ROM) with COM1 and secure connection. For instance Mobile Navigator 6 expects the TMC Signal only on COM1 and doesn't accept other ports.
The internal GPS Receiver is connected to Com4 on my system: GPS Settings -> Programms: Com4 and ->Hardware: None, 4800 Baud and -> Access: Automatic.
In a few words: internal GPS receiver on COM4, external GPS Receiver via bluetooth connected to COM1.
Do you have / use the test software from GNS to test, if youre GPS receiver is ok? You can download it on their page.
Last hint: Sometimes (Mobile Navigator6: every time!) you have to start the Navigator software twice to get a connection to the GNS 5843. It's a known bug for this receiver
Hope all this helps, otherwise contact me again
Regards Andreas
AndreasF said:
Hi Gigino,
hmmmm, strange, for me it works. And yes, I'm using the landscape modus.
Sounds for me, that Igo uses the internal GPS receiver an tries to find a TMC connection on this internal GPS receiver.
Some Ideas from my side:
If you connect the GNS receiver via bluetooth, which serial port do you use? I've configured the bluetooth settings and then the COM-connections (I hope this are the right terms, I'm using a german ROM) with COM1 and secure connection. For instance Mobile Navigator 6 expects the TMC Signal only on COM1 and doesn't accept other ports.
The internal GPS Receiver is connected to Com4 on my system: GPS Settings -> Programms: Com4 and ->Hardware: None, 4800 Baud and -> Access: Automatic.
In a few words: internal GPS receiver on COM4, external GPS Receiver via bluetooth connected to COM1.
Do you have / use the test software from GNS to test, if youre GPS receiver is ok? You can download it on their page.
Last hint: Sometimes (Mobile Navigator6: every time!) you have to start the Navigator software twice to get a connection to the GNS 5843. It's a known bug for this receiver
Hope all this helps, otherwise contact me again
Regards Andreas
Click to expand...
Click to collapse
Hey Andreas,
thanks for your help I well try again over this weekend.
They is another problem that I have and I've tryed everything but cannot resolve it.
I use the Igo Plus in landscape mode when I'm using the map and I get a reminder or a call the screen revertes to portrait mode and after accept the call or dismissing the reminder all the buttons in the Igo software goes all funny.
Do you have the same problem or have you find a way to correct this problem.
Thanks
Gigino
Ah I have this problem if the keyboard is attached but not if it isnt. What happens is that for some wierd reason the screen gets INVERTED! If you imagine where the button should be if it were upside down you can click it! Most odd!
adamelphick said:
Ah I have this problem if the keyboard is attached but not if it isnt. What happens is that for some wierd reason the screen gets INVERTED! If you imagine where the button should be if it were upside down you can click it! Most odd!
Click to expand...
Click to collapse
Hi,
I can confirm this also, the screen is inverted meens, that it looks ok, but you you have to touch it in an inverted way. I.e. the button is on the left upper corner of the screen, but you to click in the right lower area. Thats really strange. I've have the feeling, that this happens very often, if you use the Map view instead of the cockpit view.
@ gigino: I use the ameo with a brodit mount without the keyboard, so I don't have this problem.
In my last message is a little mistake, you have to switch OFF (and not ON) the automatic access in the GPS settings.
Regards
Andreas
Sorry about the noobie question, but I would like to know if it is possible to use the GPS receiver with the Tytn II with TOMTOM 6 software or is the only option to use an external gps reciever?
You do not need an external GPS recevier. The map applications are compatible with the built-in GPS receiver, just configure the appropriate COM port for GPS...
More info HERE
This is the most awsome thread ever. We should sticky it.
Greetings:
I wonder which ROM (Football, Lenny, Makuu) and which version do you use for GPS software such as iGuidance v4.0, Tom Tom v7 and IGo8 on an Axim x51V. Which one is most stable for Bluetooth GPS device, WIFI for occasionally internet access and support at least 16GB SDHC class 6?
Thanks in advance for your time and help.
I have T-mobile Vario IV (Raphael) with built in GPS receiver. In NoniGPSPlot software I can read GPS data on COM4 port, but I couldn't manage to make GPS working on garmin software because software is searching for BT GPS receiver. If someone knows how to make garmin + raphael working together I will be grateful.
Regards,
H.
The|One said:
I have T-mobile Vario IV (Raphael) with built in GPS receiver. In NoniGPSPlot software I can read GPS data on COM4 port, but I couldn't manage to make GPS working on garmin software because software is searching for BT GPS receiver. If someone knows how to make garmin + raphael working together I will be grateful.
Regards,
H.
Click to expand...
Click to collapse
The answer has been posted before....you should really search.
You have to register the software first to allow Garmin XT to work with other gps's than Garmins.
Yeasterday I installed VirtualGPS, it works good also with googlemaps and tomtom setting COM0 port, BUT when I turn back to my "standard" GPS It doesn't work any more, I setted "Other NMEA GPS receiver", Baud rate 4800, Com4 BUT nothing. Now I can't use the real gps with any program (google map, tomtom, igo) BUT i can use virtualgps!
I ried to unistall virtualgps ... but nothing.
Is there anything that I can do before an hard-reset?
Is it possible to use the real GPS and sometimes virtual gps?
Thanks
No one tried this software on diamond?
have you tried using the htc gps tool? it worked for my tomtom