good. I have a great problem. I have one qtek 9100 it was in German and it tries to put it in Spanish with the ROM of josma. Now it does not stop to be reinitiated and it does not synchronize with the PC. That I can do. Please I need aid. thanks
ipl 1.06
spl 1.06
os 2.18.7.8
Simple. If it's CID unlocked then use the SDcard recovery method described here (http://forum.xda-developers.com/showthread.php?t=276963) else you must pay the for imeicheck's tool to CID unlock first and then use the method mentioned before.
----------------------------------------------------------------------
Si tu telefono no esta bloqueado al CID entonces utiliza el método de la recuperación de SDcard descrito aquí (http://forum.xda-developers.com/showthread.php?t=276963)
Si esta bloqueado al CID tienes que pagar el instrumento de imeicheck primero y entonces utiliza el método mencionado antes.
Related
Hello to all.
I need aid to make the installation of WM2005 in my Qtek9090. I have installed in her WM2003 1.40.158 in Spanish, but when trying to follow the passages of installation of anyone of pack of this page and to follow the tutorial of: “For Instructions upgrading your ROM 5 to WM Build 14343”, and I have not been able to do it.
The system does not leave works “xda-developers_Unlocker.cab”, I cannot use it and I cannot either use this tool: “Repart_DOC.exe”.
I need to know that I am making bad, will be because I use the WM2003 in Spanish? You can help me.
Thank you very much.
_________________________________________________________________
Hola a todos.
Necesito ayuda para hacer la instalación de WM2005 en mi Qtek9090.
Tengo instalado en ella el WM2003 1.40.158 en español, pero al tratar de seguir los pasos de instalación de cualquiera de los pack de esta pagina y seguir el tutorial de: "Instructions for upgrading your ROM to WM 5 Build 14343", y no he podido hacerlo.
El sistema no deja que trabaje el "xda-developers_Unlocker.cab", no lo puedo utilizar y tampoco puedo utilizar esta herramienta: "Repart_DOC.exe".
Necesito saber que estoy haciendo mal, será porque utilizo el WM2003 en español? Pueden ustedes ayudarme.
Muchas Gracias.
buenas
tengo una htc 9100. Estaba en aleman. Le meti la rom de jossma
http://forum.xda-developers.com/showthread.php?t=262348&page=3
y ahora va muy lenta y no para de reinciarse. Que puedo hacer?
ipl- 1.06
spl- 1.06
os 2.18.7.8
saludos y gracias
hola, trata de meterle un rom original del operador o del fabricante en cualquier idioma y despues si quieres intentas el rom modificado que quieras
Moderators... you there?
please do something or we'll have another thread with 300+ posts in spanish
Hola amigo, aquí se habla inglés.
Warning !
This is an ENGLISH forum. Please post translation, or I will have to lock the thread.
Advertencia !
Esto es un foro INGLÉS. Fije por favor la traducción, o tendré que trabar el hilo de rosca
(a http://babelfish.altavista.com translation)
Good again. I feel to have initiated post in Spanish.
Where I can unload the ROM of the manufacturer. in the Web not it encounter. greetings and thanks
Creo que esta lenta debido a que tienes el IPL/SPL en 1.08, desbloquealo, y luego flash un rom, preferible el original de T-Mobile 2.26. Veras una gran diferencia en velocidad. Si necesitas instruccioned en español, enviame un privado y te lo dire.
Translation: I think it's slow due to the fact that IPL/SPL is locked on 1.08. Unlock phone and flash the original T-Mobile rom 2.26. You'll see a great difference in speed. If you need instructions in spanish, PM me and I'll show you.
No hay necesidad que te lo explique en Español. Ya hay un posting con todo lo que necesitas, leelo y siguelo paso a paso. El link: http://forum.xda-developers.com/showthread.php?t=303994
Translation: It won't be necessary for me to translate instructions in spanish to you, here is the link in spanish http://forum.xda-developers.com/showthread.php?t=303994
How install the ROM FAMAN WM6 in Trinity? You pardon by my ingles, wanted to know as I can install the new ROM of FAMAN of wm6 3,4 in trinity. Nothing not to settle ROM I am inexperienced, I hope that you prune to help me and if it is in Spanish far better. Thanks
como instalar la rom de faman wm6 in la trinity?
Perdonad por mi ingles, quisiera saber como puedo instalar la nueva rom de FAMAN de wm6 3.4 en la trinity. No se nada de instalar rom soy novato, espero que podias ayudarme y si es en Español mucho mejor.
Gracias
http://www.trinityguides.info/ here you find all you need about upgrading
Trinity owners bible
Hola a todos escribo mi primer post aki ya que necesito de su ayuda, tengo un cingular 8125 trate de flasharlo y ahora no sube se me queda en una pantalla con una jarra de cerveza, otra cosa es cuando trato de darle un hard reset me da error. Que puedo hacer necesito de su ayuda. De antemanos gracias
IPL 1.01
SPL 3.08
GSM 02.25.11
OS 1.5.4.2
Press Send to restore
factory default
Other keys to quit
Format FAT partition
Format is failed
English wud be much helpful in understanding your problem and giving advise and help !
transletions
I have a "Cingular 8125" trying to flash and do not go up now falls on a screen with a pitcher of beer, something else when I try to give you a hard reset gives me wrong. What do I need your help. Thanks in advance
Flash official rom or Button's Rom again,it'll recover back.
I have been trying to unbrick my 750 treo, apparently my Radio bootloader is corrupted. I have scoured this forum and the internet trying to find a solution.
I've used mtty to try to at least erase or use task 2a, but nothing happens. None of the commands seem to work. I tried the password 0000000000000000
which says its invalid.
I also tried BsaD5SeoA, and it says it passes, but rtask, erase or task 2a and lnb command don't do anything. I have tried mtty 1.11 and 1.42 and neither one will work.
Is there a special microsoft library that I need to install in order to access these commands? I am at a loss why everything I try doesn't work. There has got to be a solution for this. I've tried reflashing the ROM 10 times now, tried mtty, tried the AT&T rescue program.
Is the phone bricked beyond repair?
Any help would be appreciated
I guess it is a major brick, oh well, it'll cost me more to take it in for repair than it would to just buy another used one off eBay.
Keep it around for parts.
The Windows Mobile 6.5 made it a pretty worthwhile phone.
I'll be back...
Have you tried flashing Olipro's Hard-SPL just to see if it will work? I know for a fact his SPL will accept task 2a... task 28... etc. The OEM SPL won't accept those commands and I bet your phone is still stuck on it and that is why they won't work. How do you know that it is your radio that is corrupted and nothing else? You might be able to unbrick it through some trickery.
navenedrob said:
Have you tried flashing Olipro's Hard-SPL just to see if it will work? I know for a fact his SPL will accept task 2a... task 28... etc. The OEM SPL won't accept those commands and I bet your phone is still stuck on it and that is why they won't work. How do you know that it is your radio that is corrupted and nothing else? You might be able to unbrick it through some trickery.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=511763
Download the attachment in that post, disregard the files accept for the CHEEIMG.nbh (it is Hard-SPL 1.40). Load the NBH to your SD card and try to flash it. If you can flash it or jump through some loops and get a miracle then there is a chance to fix your phone.
Yeah, I've tried that, it just goes to 7% and then the phone reboots on its own. Also if I try to flash from the SD card it won't recognize anything but an official ROM. When I do a Mtty "checkimage" command, when it verifies the radio, it times out with 0x0 CRC.
With everything I've researched, the only thing that will repair this phone is the right security password for Mtty. So I took another route.
I just purchased a Treo with a broken screen for cheap, so I'm going to swap out the screen and start over. And am going to make sure I have Hard-SPL 1.40 on the phone this time.
Thanks for the help and all of your hard work.
We Treoites appreciate it.
Looking forward to trying the new ROM
Hola por favor necesito ayuda, tengo una treo 750 a la cual le instale una ROM de WM 6.5 q al parecer no era para mi movile, la cosa es q se me quedo con la pantalla en negro, me dijeron q con el programa MTTY.exe podia solucionarlo, pero no se como usarlo, cuando lo habro y selecciono el com 1 se abre como para escribir, pero en esa hoja no dice absolutament nada y no me deja escribir. Por favor se los ruego, ayudenme, me costo mucho conseguir este tipo de celular y ahora me paso esto y sincerament me pone demasiado mal ya q el equipo es caro. Gacias y espero una ayuda
The_hobbyt said:
Hola por favor necesito ayuda, tengo una treo 750 a la cual le instale una ROM de WM 6.5 q al parecer no era para mi movile, la cosa es q se me quedo con la pantalla en negro, me dijeron q con el programa MTTY.exe podia solucionarlo, pero no se como usarlo, cuando lo habro y selecciono el com 1 se abre como para escribir, pero en esa hoja no dice absolutament nada y no me deja escribir. Por favor se los ruego, ayudenme, me costo mucho conseguir este tipo de celular y ahora me paso esto y sincerament me pone demasiado mal ya q el equipo es caro. Gacias y espero una ayuda
Click to expand...
Click to collapse
I' m usando un traductor es esperanza de I que usted puede leer. Usted necesitará destellar con el unlocker del cheeta antes de que usted pueda utilizar mtty. Usted necesita encontrar que el puerto del USB el teléfono esté atado con a la sinc. activa de Microsoft. O el intento al reflash con ROM original 6.0 usando tarjeta del SD dio formato a la grasa 32