remapping bluetooth headset button to goggle audio - Tilt, TyTN II, MDA Vario III General

Hi, I would like to be able to toggle audio through the mono bluetooth headset by pressing the button on the headset since I dont find voice commander useful for me. I tried some of the old tricks such as setting registry key EnableAPLaunch but it does not work. I have uninstalled cyberon voice command at the moment.

jagr said:
Hi, I would like to be able to toggle audio through the mono bluetooth headset by pressing the button on the headset since I dont find voice commander useful for me. I tried some of the old tricks such as setting registry key EnableAPLaunch but it does not work. I have uninstalled cyberon voice command at the moment.
Click to expand...
Click to collapse
Try this >>
http://forum.xda-developers.com/showthread.php?t=333260

this one uses MS voice command? I'm not keen to use any voice command programs. I just want the button on the bluetooth headset to be able to toggle BT audio on and off

jagr said:
this one uses MS voice command? I'm not keen to use any voice command programs. I just want the button on the bluetooth headset to be able to toggle BT audio on and off
Click to expand...
Click to collapse
Ops sorry wrong link...
Here we go
http://forum.xda-developers.com/showthread.php?p=1548652#post1548652

thanks for the help, yup this works great but i would like to be able to toggle it from the button on my headset. if anyone else has some info to offer i would really appreciate it.
i've tried this suggestion but it doesnt work on my kaiser
http://forum.xda-developers.com/showthread.php?t=278778&page=16&highlight=bluetooth+skype

Related

Voice Dial via Wired handsfree

Is there a way to activate voice dial via the call pick up button on a wired headset? I thought I had seen a post that a fix for this... but can't seem to find it now. Any help? Thanks.
Is this the thread you're referring to?
New application: Talk Button Detector 0.3
Wow thanks...
Thanks for the quick reply. Yes it was this...

Voice Command 1.6 on Tytn II

Has anyone installed MS Voice Command on their Tytn II yet? I'd really like to be able to initiate calls from the BT headset when in the car...
Just curious since I know the new version supposedly supports commands directly from the headset. If no one else has.. maybe I'll buy it and give it a shot.
sqadan said:
Has anyone installed MS Voice Command on their Tytn II yet? I'd really like to be able to initiate calls from the BT headset when in the car...
Just curious since I know the new version supposedly supports commands directly from the headset. If no one else has.. maybe I'll buy it and give it a shot.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=998205&postcount=9
Works like a charm. Will post the link to get VC 1.6 to announce calls.
can you post the link please to get it to announce calls.
Its been great having VC 1.6 running with no hacks needed. It would be the icing on the cake to have it announce calls finally.
Can I just install it and it works? As in I can initiate calls with the BT Headset button? I hate having to fiddle with the phone.
If I can't do this, it's not worth $39 imho.
chrisnash said:
can you post the link please to get it to announce calls.
Its been great having VC 1.6 running with no hacks needed. It would be the icing on the cake to have it announce calls finally.
Click to expand...
Click to collapse
Here you go (found it after searching for hours don't remember from where)
***
Disable Voice Command before you attempt this
Overwrite your existing files from the zip. Make sure you can see hidden/system files
\Windows
VoiceCommand_PPC.cpl
\Program Files\Voice Command\
VoiceCmdRes_PPC.dll
VoiceCommandWMP.dll
voicecmd.exe
Enable voice command.
Let me know how it goes.
kavi said:
Here you go (found it after searching for hours don't remember from where)
***
Disable Voice Command before you attempt this
Overwrite your existing files from the zip. Make sure you can see hidden/system files
\Windows
VoiceCommand_PPC.cpl
\Program Files\Voice Command\
VoiceCmdRes_PPC.dll
VoiceCommandWMP.dll
voicecmd.exe
Enable voice command.
Let me know how it goes.
Click to expand...
Click to collapse
I downloaded the zip file but there are only 3 files inside. I am still missing VoiceCmdRes_PPC.dll - What went wrong?
So I installed Voice Command... But I can't seem to get it to work from my BT Headset Button?? Can anyone help me with this?
sqadan said:
So I installed Voice Command... But I can't seem to get it to work from my BT Headset Button?? Can anyone help me with this?
Click to expand...
Click to collapse
Please check post #2
h2ogun>>
As I said you should have windows display hidden/system files to see that. Check your windows explorer settings, all 4 files are there.
Thanks. That did solve the problem.
I can't seem to get Voice Command to announce my reminders. Is there any fix for this yet?
Amlethae said:
I can't seem to get Voice Command to announce my reminders. Is there any fix for this yet?
Click to expand...
Click to collapse
I also had the same problem but after the call announce fix it started to work.
kavi said:
Please check post #2
h2ogun>>
As I said you should have windows display hidden/system files to see that. Check your windows explorer settings, all 4 files are there.
Click to expand...
Click to collapse
I thought this was for VC 1.5 not 1.6??? I thought VC 1.6 was supposed to work natively with the BT headset? I'm not rying to be a pain - I just don't want to hack anything up if I don't have to.
sqadan said:
I thought this was for VC 1.5 not 1.6??? I thought VC 1.6 was supposed to work natively with the BT headset? I'm not rying to be a pain - I just don't want to hack anything up if I don't have to.
Click to expand...
Click to collapse
I have both but VC 1.5 won't even start on my Kaiser.
OK... So I added the suggested key to the registry - but Istill can't start Voice Command with the button on the headset... (Jabra x10 series II)
Any thoughts? I am assuming the regsitry key is a String Value:
Name = "Path"
and then the value being the path itself... is this correct??
sqadan said:
OK... So I added the suggested key to the registry - but Istill can't start Voice Command with the button on the headset... (Jabra x10 series II)
Any thoughts? I am assuming the regsitry key is a String Value:
Name = "Path"
and then the value being the path itself... is this correct??
Click to expand...
Click to collapse
Make sure you assign the voice command button as well
It seems to be working now... It takes two beeps on the headset to initiate VC. Well... We'll see how this works over the next week or so...
Glad you got it working.
BTW my JX10 works with one press.
kavi said:
Glad you got it working.
BTW my JX10 works with one press.
Click to expand...
Click to collapse
I have to hold the button until there are 2 beeps then i get the prompt...
Maybe the Series II works differently?
sqadan said:
I have to hold the button until there are 2 beeps then i get the prompt...
Maybe the Series II works differently?
Click to expand...
Click to collapse
Maybe... but if it works that's all that matters!
Are these steps working for other Kaiser users? VC 1.6 works fine after install for activation via an assigned button on the phone. No matter what tweaks I make in the registry or files I replace though, activation through the headset is just opening up the HTC phone applet.

Problem getting Cyberon voice dailer working with BT

Hi, I've been searching in this forum and tried most of the solution but still can't get it to work. So I hope somebody can help me out.
I'm using Cyberon voice dailer, I can it to work if I press and hold the # 4 button to bring up the voice speed dialer and either speak to the phone or BT for it to dial. However if I just tap the button on the BT it just bring up the normal dial pad. What I'm looking for is the ability to tap the button on the BT then speak the name and it will dial. Is it possible with the Cyberon voice dalier?
Thanks in advance for your help.
Same Issue
I have the same problem. I have been able to use it before, but I don't know if it is the ROM i am using or not. Using Open Touch 3.0 Biggy. Flashed too many ROM's to keep track when it worked and when it didn't.
joking said:
Hi, I've been searching in this forum and tried most of the solution but still can't get it to work. So I hope somebody can help me out.
I'm using Cyberon voice dailer, I can it to work if I press and hold the # 4 button to bring up the voice speed dialer and either speak to the phone or BT for it to dial. However if I just tap the button on the BT it just bring up the normal dial pad. What I'm looking for is the ability to tap the button on the BT then speak the name and it will dial. Is it possible with the Cyberon voice dalier?
Thanks in advance for your help.
Click to expand...
Click to collapse
Hi,
The 4th hold button is mapped to hot voice record.
In the next release I'm including voice speed dial and MS voice command.
Also,
Please try and post issues with my roms in the original thread when possible, doing so will make it easier for me and others to help you.
Regards,
ttran001 said:
Hi,
The 4th hold button is mapped to hot voice record.
In the next release I'm including voice speed dial and MS voice command.
Also,
Please try and post issues with my roms in the original thread when possible, doing so will make it easier for me and others to help you.
Regards,
Click to expand...
Click to collapse
Hi Tran,
Thanks for your reply and sorry if I post in the wrong place but I don't think it's the problem with your rom. Press and hold the 4th button to activate voice dialer work very good with your rom. I think the problem is more on the Cyberon speed dialer than your rom.
What I would like to do is when using bluetooth, press the button on the bluetooth and it'll activate the voice dialer. Rather than press and hold the 4th button on the wing and then speak to the bluetooth.
On the side note, most of my contacts name is in Vietnamese so MS Voice Command really have a hard time recognize those names. That's the reason why I choose Cyberon so I can record the name tag. It work better than the preset one on MS Voice Command.

How to map a function for the headset stereo button?

Does anyone know if it is possible to asign a function to the stereo headset that comes with the package of the HTC TyTN II?
If I press and hold that button in the stereo (the button used to receive/end calls) then the program Voice Commander is launched, as a default function I guess. But, what if I want to change this and buy pressing-holding I want to run another voice control program instead, like, let's say: Vito Voice2GO?
How can I map such a thing to the stereo headset button? Is that possible?
Thanks in advance
uuuyep said:
Does anyone know if it is possible to asign a function to the stereo headset that comes with the package of the HTC TyTN II?
If I press and hold that button in the stereo (the button used to receive/end calls) then the program Voice Commander is launched, as a default function I guess. But, what if I want to change this and buy pressing-holding I want to run another voice control program instead, like, let's say: Vito Voice2GO?
How can I map such a thing to the stereo headset button? Is that possible?
Thanks in advance
Click to expand...
Click to collapse
Have you tried changing the top left hardware button for 'voice command' (in settings - buttons) to 'Vito'? I wouldv'e thought this would do it.
Hi Leoni1980
I thought same, thinking about the fact that "voice command" is asigned to the top left hardware button (as well as "record" soft is asigned to that button). But I don't have that button mapped to the default soft. I have this button maped to TaskSwitcher (pressing) and to HTC ActionScreen soft (pressing and holding). So, fallowing this idea, when I press and hold the headset button, it should launch the HTC ActionScreen soft, as you also think it would if I map it to eg. Vito', but it doensn't. It keeps on launching the "voice command soft". Strange thing... It's like by pressing and holding the headset button it is "calling" directly the exe of "voice command", or that there is no a similar (analog) button for the headset button on the device and it sends predefined independent instructions. I have no idea (?)
It would be great if it is possible to remap it to the preferred soft...
Any other idea, please.
Thanks!
Solved mapping an app to the wired headset stereo button
Solved the problem! Now pressing and holding the button in my wired headset it is launched VITO VoiceDialer as I wanted, (and probably with the same procedure the button of the wired headset can be mapped to launch any other app, although I only tested with VITO VoiceDialer, for now...).
I just edited the Registry trying to "adapt" and idea that I found in this forum here Under the title: "MS Voice Command activation from BT headset"
Interpreting that great hack, I thought that one can also make it work for the porporses I posted up here. And it did work like a charm! I needed so much this solution... So I'm glad to post it here below, to make the way shorter for others that may need this help as much as I did.
This is what was done:
1- Open a registry editor
2- Went to HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
3- I modified the default string marked "path", in my HTC TyTN II it was the following:
\ProgramFiles\Cyberon\VoiceCommander\VoiceCommander.exe
And I changed that for:
\ProgramFiles\VITO\VoiceDialer\VoiceDialer.exe (that's the path where I previously had installed VITO VoiceDialer).
4-Press "Done" and then "Yes" in the warning pop up dialogue box...
5-Then I just pressed/holded the button on my wired headphones and the program was launched smoothly!
I hope this can be useful

Is there anyway to make the headset button the MSVC button?

Is there anyway to make the headset button the Microsoft voice control button?
Because the headset button seems to do absoloutly nothing and it would be cool if you could assign it to do something.
I searched the forum but couldnt find anything that helped. I saw the mortscript thing which was cool but that only works for mortplayer
Any ideas?

Categories

Resources