Howto Call Up Volume Settings with Button - Tilt, TyTN II, MDA Vario III General

Hello,
I'd appreciate to assign the 'volume' window to a hardware button - let's say the Button 6 (Voice Dial, which i never use).
The volume window is the one, you normally get then tapping on the volume icon on top of the screen.
This window should open/close by pressing the hardware button. Once it is open, I can set the actual volume with the Jog Wheel.
Any help is appreciated!
Chris

You can try something: install Wisbar Advance 3 just for trial. i know that you can show that "volume bubble" by pressing buttons on the taskbar, and i know it offers some links in the programs folder for utilities, like switch task etc., but i'm not sure if it brings a new link for that volume bubble (i unfortunately uninstalled WA3 yesterday so i cannot test - maybe someone who has it installed can verify the links so you don't have to install it...)

With Wisbar Advance 3 it works
Chris

hmmm, can you post the content of the link that does that ? or the .lnk file ? so others can do this without WA3...

Another suggestion: AEButton plus

Related

I need someone to develop a program for the Kaiser

Basically the program has to do the following:
1- I want the RED (front facing) "call end" button to work like the Treo 750. So pressing it while in the Today screen switches off the phone, pressing it again switches the phone on. Pressing it while in an application takes you to the today screen.
2- After doing that then we don't need the hidden phone on/off button so we can make it into a silent/mute button. So a long press on this button while the phone is either on or off will put the phone in silent mode, also very similar to the Treo's profile slider.
Anyone reading this is up to the challenge?
Anyone here has any other requests? Let's make a list and see who is up to the challenge.
aminhafez said:
Basically the program has to do the following:
1- I want the RED (front facing) "call end" button to work like the Treo 750. So pressing it while in the Today screen switches off the phone, pressing it again switches the phone on. Pressing it while in an application takes you to the today screen.
2- After doing that then we don't need the hidden phone on/off button so we can make it into a silent/mute button. So a long press on this button while the phone is either on or off will put the phone in silent mode, also very similar to the Treo's profile slider.
Anyone reading this is up to the challenge?
Anyone here has any other requests? Let's make a list and see who is up to the challenge.
Click to expand...
Click to collapse
Not up to it, but why'd you want that. Switch phone/flight mode can be assigned to any hw button except call or call end, assign the same button(hold) for mute/unmute and there you are.
Call/end call buttons not being assignable is a hardware limitation, accordig to spb software house (pocket+).
tomasz said:
Not up to it, but why'd you want that. Switch phone/flight mode can be assigned to any hw button except call or call end, assign the same button(hold) for mute/unmute and there you are.
Call/end call buttons not being assignable is a hardware limitation, accordig to spb software house (pocket+).
Click to expand...
Click to collapse
Ok so how can I assign the mute/unmute to a hardware button as I can't find it in the settings--->buttons' drop down menu?
I use spb pocket plus to assign buttons. It has the mute option standard in its list of button tasks. There might be freeware apps that let you do the same, but I don't know them (as I allready had a copy of spb pocketplus from my previous windows mobile device)
Edit: AE Button plus seems to be a freeware app that can do what you want...
http://ae.inc.ru/aebplus.php
And if "hold" is a suitable alternative to mute, you don't have to do anything... pressing in the volume button toggles the call on/off hold. At least on my Tilt.
tomasz said:
I use spb pocket plus to assign buttons. It has the mute option standard in its list of button tasks. There might be freeware apps that let you do the same, but I don't know them (as I allready had a copy of spb pocketplus from my previous windows mobile device)
Edit: AE Button plus seems to be a freeware app that can do what you want...
http://ae.inc.ru/aebplus.php
Click to expand...
Click to collapse
AE Button worked well. Now I can mute/unmute at a touch of a button. I haven't tried its full potential yet.
Thanks for the great tip.
Still though I wouldn't mind a power feature like the Treo. I do not like that itty bitty recessed power botton on the right...
On a side note I'm going to try and see if there is a reg key on the Treo I can copy to the Kaiser where when you are in PIE and hold the action button it pops up the IE menu. That's nice. Not sure why its only on the Treo. I guess for it's one handed nature... What, I don't get to use my Kaiser with a one handed nature in mind?...
juiceppc said:
you are in PIE and hold the action button it pops up the IE menu.
Click to expand...
Click to collapse
Hmmm, that might be a useful map for AE button... for the side "ok" button, map a double-click to the left softkey, and press/hold to the right one (and single-click stock OK). Between that and the scroll wheel, that should make for some pretty easy one handed operation.
Just tested it.. works well, though the side OK button is a bit stiff/recessed to easily double-click with a thumb. May take some getting used to.
Hey guys,
I think i have found what your looking for. I also needed to toggle my Flight mode by a button because since most ROM versions of WM5 and WM6 Flight mode can`t be switched by tapping the signal meter at the top of the screen.
I installed this app and linked it to Button 6/Recording (Press & Hold) and now it switches Flight Mode On and Off. This is what i needed.
Look here: http://toosten.de/index.php?seite=sw&id=7
Have fun with it
One thing for now i noticed. When activating Flight Mode, it just turns off the Phone Signal and not BT when enabled. I am contacting the author of teh tool to see if some options can be added.

Remapping hardware buttons

There are several applications which allows you to remap buttons (AE Button Plus, HButton...). If you dont need more than 6-8 shortcuts you should be fine with this. (I prefer this remapping solution because it doesnt require to keep some program running in RAM)
These shortcuts are basically generic but here's what I've found and tested on Wings.
Code:
Shortcut Current App. Remapping
Long_POC.lnk - OK
Long_End.lnk Lock Not tested
Long_Home.lnk - OK
Long_Send.lnk - OK
Short_POC.lnk CommManager OK
Long_Power.lnk Turn Off OK
Long_Pound.lnk Line Switch ???
Long_VolUp.lnk Voice Dial. OK
Long_Camera.lnk Camera OK
Short_Power.lnk Quick App. OK
Short_Camera.lnk Camera OK
Long_VolDown.lnk Voice Notes OK
Long_NonCamera.lnk ??? ???
Short_NonCamera.lnk ??? ???
(NonCamera = POC on some devices. I dont know why is it on Wings but probably because of generic WM keypad map.)
Code:
Key Name Hardware Button
POC CommManager
End End Call
Home Home
Send Send Call
Power Turn On/Off
VolUp Volume Up/+
Camera Camera
VolDown Volume Down/-
How to use...
1. Create a shortcut of a program
2. Rename the shortcut to the shortcut name of a key you want to asign to (TaskManager.lnk to Long_Home.lnk for example)
3. Copy it to \Windows\ directory
Wow! Awesome! Thanks for shedding light on this!
Tested short_power.lnk successfully.
[ADDITION]
IE button: is PIE.lnk + Short_IE.lnk.
About
If you need turn on WiFi, you have to press at least 4 keys by default to start WiFi (using Comm Manager).
After installation of WirelessToggle, just press and hold Comm Manager button to toggle Wifi (on/off). (Alternatively you can use attached exe and assign WirelessToggle to any button / shortcut you want to).
And as always: There are few more programs that can be used for faster turning on/off WiFi but this keeps the RAM free as much as possible.
Installation:
WirelessToggle.cab - just install
Run WirelessToggle.exe (from \Program Files\smartmadsoft\WirelessToggle) manually (just once) before using the shortcut (otherwise you wont be able to confirm dialog window asking you about running unsigned code)
Download:
WirelessToggle.zip (4 kB)
Support:
Tested only on S730 but it should work on other devices as well (will test it later).
Great work moneytoo!
This is real usefull, thanks for sharing!
does anyone know the WM6.1 connection manager (wireless manager in home screen) file name?
wireless toggle doesn't work for me (wm6.1) it removes all wireless settings from the WM comm manager, and swiches wireless off right after I've enabled it.
i need to look into this, whether it will work on a diamond, cause it's hardware button associations are plain stupid...
tuem said:
i need to look into this, whether it will work on a diamond, cause it's hardware button associations are plain stupid...
Click to expand...
Click to collapse
Does it work on the Diamond? I'm getting a Touch Pro in a month and I really hope it works...
tuem said:
i need to look into this, whether it will work on a diamond, cause it's hardware button associations are plain stupid...
Click to expand...
Click to collapse
What did you find out?
Does it work on your Diamond?
i right clicked on psshutxp.exe and selected create a shortcut.. i renamed file to Long_Power.lnk .. dropped in my windows folder and reset my htc touch pro (cdma) ,,, never asked if i wanted to overwrite anything ...
now when i press down my power button... the same default action happens... it is not running psshutxp....
Remapping headset button?
I'd like to bounce an idea and see if your solution might work for this specific issue.
Seems like the headphone button = green answer button on newer htc systems. If I press the headhpone button twice - I'd like to jump one track forward. Press it three times, I'd like to jump one track back again. Would this be possible to map somehow? That is, multiple key inputs?
Regards.
Has anyone here found a solution for the touch diamond?
Wrong forum m8, this is the Wings smartphone, not the Diamond pocketpc
spone1 said:
Wrong forum m8, this is the Wings smartphone, not the Diamond pocketpc
Click to expand...
Click to collapse
I know that this is the Wings forum but nevertheless I would like to know if anybody has found a similar mapping functionality for the HD2... I tested several shortcuts but only long_send.ink seems to work.
For Multibuttonmappingwhatsoever I can recommend HButton as it allows to activate different things depending on how long you press the button. Remapping doesnt really work for me after all, nothing happens..
Hi, I want to remmap Home Button in HTC HD2(Leo). But when I search the link, I can't find anything that mention about home.
Any suggestion? Thx..
R0b3rt2 said:
Hi, I want to remmap Home Button in HTC HD2(Leo). But when I search the link, I can't find anything that mention about home.
Any suggestion? Thx..
Click to expand...
Click to collapse
Oooopss.. Sorry, wrong thread.
I'm just too desperate.
For the HD2 unfortunately only the long_send button seems to work. I tested the others mentioned on the first page of this thread but they did not work - at least not by using shortcuts or reg keys (but I did not test any special software as HButton).

Help: Want to remap hard button

Hi all,
Anyone can help to remap the hard button??
I want to change the Home key to Alt-tab, and the Back key change to OK/Close (1 press for ok and long press for real close the application). I have tried AE button plus, but not function very well.
Attached is the Alt-tab s/w i have used.
Don't know why HTC put a Home and Back key in WM pro device
Thank you very much,
did you reset the device after you changed the settings?
yes, but still doesn't work
There's a software called Hbutton. You might wanna try it.
Just tried Hbutton, but it doesn't work on diamond.........
Awww.. now how am I gonna survive on the diamond without Hbutton?!
There's another software called SmartSkeys (or something oike that) Not sure of it'll work.
Anyone got any suggestions on which software to use to map diamond buttons to many functionalities?
This one works on Diamond: AE Button Plus.
To my understanding from testing AEButton on the Diamond, I have realized that:
The HOME key cannot be remapped.
The Back key is essentially a "WIN" key. You can create a new button and remap the Back key. HOWEVER, the shortcuts DOES NOT WORK when you are at today screen. So here is what I do, I remapped the Back key single click to "Escape". double click to close program, long click to close all programs.
Thats the only logical thing i can think about using the back button due to the limitations.
Any ideas?
Escape = ok/close ?
With AEB Plus I managed to map "action long" to "task manager", but the setting doesn't seem to survive a soft reset.
Problem with TouchFLO 3D.
Disable TouchFLO 3D, you might map home/ok button by mappingware.
Setting -> Personal -> Today -> Items
Use SortInchKey, if you enable TouchFLO, you might map VolUp/VolDown/Ok(exclude Today screen) buttons.
Tried AE Button Plus 2.6.3, the "ok" button in AE Button Plus list can refer to back key, my setting is press 1 to minimize, long press to close current application. However, AE Button Plus can't handle the Home button. I already sent a request to them, hope their next version can sort it out.
I'm posting here to find this later. I use AEB on all my devices and want a Diamond. Hopefully it gets "worked out".
tkhs said:
Problem with TouchFLO 3D.
Disable TouchFLO 3D, you might map home/ok button by mappingware.
Setting -> Personal -> Today -> Items
Use SortInchKey, if you enable TouchFLO, you might map VolUp/VolDown/Ok(exclude Today screen) buttons.
Click to expand...
Click to collapse
Yes, the mappings worked when TouchFLO was disabled. But when TouchFLO was enabled again, the mappings then didn't work.
Can someone please help me?
I use a golf GPS/Scoring program on my diamond (mobile golf scorer) and on it there is an option to use hardware button to turn display on/off, this keeps the gps active permantly. Its mapped in the program as 'button c' which from what i can tell should be the 'right hardware button' on a usual ppc.
I'm trying to map it as 'back button' using AEBPlus but it will only work on the main diamond screen or 'today' screen. I've tried mapping it to various buttons on the diamond but When i start the golf program it does not work.
Has anyone any ideas? I need to remap a button that will turn the display off no matter what i'm running.
Thanks again
I'd love to change the function of the "Back Button" aswell,
it has been annoying me since the first day I got it.
HButton seemed very promising, but sadly, it doesn't work.
Do hardware keys also have a registry number like the softkeys?
Like 112/113 for the softkeys?
Wondering anyone will use "Home" and "Back" button regularly....Maybe u guys can share your experience on how to smartly use this 2 buttons as I don't have any idea.........
Hello everyone!
This topic is very actual especially on all russian forums (hpc.ru 4pda.ru 4pda.info). Did anyone overcomed this difficulty with remapping hardware buttons? I tryed AEButton Plus but I was unsuccessfull in remapping the dimaond's "back" button - is there any one who did it? Please share the experience - it would be very very usefull to remap this button and to bind it to launching Dynamo3 task manager.
Thanks in advance.
ILya.
None of the programs named here work correctly on the Diamond, including AE Buttons Plus.
However, these buttons CAN be mapped. I know that because the capacitive buttons tester program can detect and show that you pressed these buttons. While this program is active, if you press the home key, it shows that you pressed the home key, but you don't go to the home screen. So it's possible, but only HTC knows how. We need their API's.
aydc said:
None of the programs named here work correctly on the Diamond, including AE Buttons Plus.
However, these buttons CAN be mapped. I know that because the capacitive buttons tester program can detect and show that you pressed these buttons. While this program is active, if you press the home key, it shows that you pressed the home key, but you don't go to the home screen. So it's possible, but only HTC knows how. We need their API's.
Click to expand...
Click to collapse
so this method willn't work too? http://forum.xda-developers.com/showthread.php?t=355141
the silly part on the htc side is to have 3 of 4 hw buttons do almost the same - if you are in an application, pressing home, back or hang-up button will act as "escape". am i wrong?
for one thing, it would be at least useful to have an "ok" button.
the ideal setup for me would be to use the "go to the tf3d home tab" function of the home key by pressing the "hang-up" button and use the home key as "ok"...

switching to landscape mode?

I'm sure there is a program someone has written to switch you screen to landscape mode without sliding the keyboard out,could someone point me in the right direction please i have done a couple of searches for it and scoured through numerous pages but cannot find it.
Thanks
AEButton Plus. You can set a button press (once, twice, etc) to rotate the screen.
start - settings - personal - buttons - change assign to a button to <rotate screen>
When you get wrong direction of rotation you need to go to settings - system - screen and change orientation
Then you will get changing screen to landscape,
i got that on hold button 6
Ok i have looked into ae button plus and this is just for mapping keys,in the default rom keymapper you can't select <rotate screen> as a option to map to a button.does ae button plus somehow make this command available to you?
Just looked again and found it...DUH!
Thanks guys
u need this program
this is the best program i was found its the same as the guy on top say.
i upload it to my privet server so u can download it www.webmotion-design.com/screen.rar its 2 small cab and install them both and then add a hard butten to one of them .koby
Great tip. I never realized it was in the list for buttons. I have always wanted this capability assigned to a button rather than a 3 step process. Thanks.
Thank you for the tip!!!!! Awesome... my Tomtom now displays as expected
mirorr please

Landspace messaging

Hi,
can anyone give me some feedback on landscape messaging on Topaz ? Is it available ? perhaps include some picts or vid ? i'd appreciate it ..
secondly, i've never own a htc mobile and i've recently seen unpackaging of Topaz device ... the headphones cable and headphones itself seemed like one piece that cannot be unplugged in the middle and replaced with another pair of headphones, is that correct ? Does any reduction exists, so i'd able to plug in headset of my own ?
Thanks in advance for any replies at all ...
Regards, Sharpener
Yes there is landscape keyboad while messaging. I don't have my TD2 yet but am positive. Here are some links. Ebay may have better deals though.
http://clove.co.uk/viewProduct.aspx...Category=A90CF1CE-2959-499B-9AFA-172FF5C27F9F
http://clove.co.uk/viewProduct.aspx...Category=A90CF1CE-2959-499B-9AFA-172FF5C27F9F
Ebay has some different types for cheap. http://shop.ebay.com/?_from=R40&_tr...w=HTC+3.5mm+adapter&_sacat=See-All-Categories
Hi!
I have one of these (http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=179134), the original HTC remote control with a 3.5mm jack. I have not tried it on the D2 (mine has not arrived yet ), but it works great on other HTC devices.
Regards,
PK
sharpener said:
Hi,
secondly, i've never own a htc mobile and i've recently seen unpackaging of Topaz device ... the headphones cable and headphones itself seemed like one piece that cannot be unplugged in the middle and replaced with another pair of headphones, is that correct ? Does any reduction exists, so i'd able to plug in headset of my own ?
Regards, Sharpener
Click to expand...
Click to collapse
Yes, the text entry for Email or SMS can be used in landscape with full keyboard.
And the headphones are standard HTC bundled ones where you cannot connect your own headphones down into the remote etc.
You'll need to buy one of the many adapters from Expansys or online which will allow this.
Thanks for replies .. i appreciate it !
I've got one another question: the set of buttons on left side of the device that regulate the output volume .. can they be configured to do another action on longer hold ? for instance playing previous / next song, while audio player's currently in use ?
Regards, Sharpener
sharpener said:
Thanks for replies .. i appreciate it !
I've got one another question: the set of buttons on left side of the device that regulate the output volume .. can they be configured to do another action on longer hold ? for instance playing previous / next song, while audio player's currently in use ?
Regards, Sharpener
Click to expand...
Click to collapse
It seems it is not possible at the moment (reviews indicate only 1 button is remapable, the call or hold one iirc), although with additional soft it may be possible: maybe ssMaHo (it was mentioned in another thread), maybe AE button plus (non free ), or others?
I'd like to remap volume buttons too, for page up/ page down i ebooks, they are quite well located to allow comfortable page switching while holding the TD2 in one hand...
You can remap more buttons with AEBPlus. I have remapped the Back-button to both a task manager (click once) and OK/Enter (click and hold). You can remap other buttons too (don't know about the windows button though) for one click, two clicks, three clicks and click and hold. BTW, AEBPlus costs only USD 8.
Hi,
are you positive you can remap those buttons on side for different actions on longer hold ? Can you verify it and maybe test it for me ?
Thanks in advance ..
Regards, Sharpener
Yes I can verify it works. I have short press volume up mapped to Up Arrow and short press volume down mapped to Down Arrow.
Long press volume up/down are now the volume keys.
madstyle69 said:
Yes I can verify it works
Click to expand...
Click to collapse
Thanks for answering the question!
Remap the Back button?
deechte said:
You can remap more buttons with AEBPlus. I have remapped the Back-button to both a task manager (click once) and OK/Enter (click and hold). You can remap other buttons too (don't know about the windows button though) for one click, two clicks, three clicks and click and hold. BTW, AEBPlus costs only USD 8.
Click to expand...
Click to collapse
Actually, can I ask what options in AEBPlus you selected to modify the Back button? I cannot see it as an option in AEBPlus for that particular button?
Sorry, I've been on holiday.
The button you want to edit is the OK-button. Hit the OK-button entry in the list in AEBPlus (hold it for a couple of seconds) to get the options menu. For me, the OK-button is the second in the list, before the Windows-button entry. Choose 3 "let AEBPlus handle this button". I chose for "1. Single keypress": "the taskmanager" and for "4. Press and hold button": "hit enter".
The entries may be called a little different from what I wrote, because my version is dutch and I don't know the exact translations they used.
Hi,
have you managed to set up on any button the previous/next song function while audio is playing ?
I've set up on longer hold hardware volume up/down buttons to up and down keys so, while you are in audio player it works just fine (switching songs), though while you aren't you're screwed.
Any solutions ?
Thanks in advance ...
Regards, Sharpener
No, I never tried that. I'm not using my D2 to play music often.
Yes works fine!
deechte said:
Sorry, I've been on holiday.
The button you want to edit is the OK-button. Hit the OK-button entry in the list in AEBPlus (hold it for a couple of seconds) to get the options menu. For me, the OK-button is the second in the list, before the Windows-button entry. Choose 3 "let AEBPlus handle this button". I chose for "1. Single keypress": "the taskmanager" and for "4. Press and hold button": "hit enter".
The entries may be called a little different from what I wrote, because my version is dutch and I don't know the exact translations they used.
Click to expand...
Click to collapse
Perfect - that works fine. Appreciate your help with this as I wasn't sure what teh 'Back' button would be called.
I don't know why I can't configure any button using AEBPlus ver.2.6.6 for my Diamond 2.
I tried to configure the "Back" button. I chose "OK-button", then chose 3 "let AEBPlus handle this button", chose 2 "Double keypress", chose "Run Application" and chose an application "Super Calendar".

Categories

Resources